CI: Adding scenarios for COTS-UE

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

ci-scripts/Jenkinsfile-inria-r2lab

@@ -176,6 +176,8 @@ pipeline {
 
                         // Putting the adaptation parameters for the OAI UE
                         sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/adapt_usim_parameters_${r2labUE0}.sed ${fituser}@${r2labUE0}:/tmp/adapt_usim_parameters.sed'"
+                        sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/phones_list.txt ${fituser}@${r2labEPC0}:/tmp'"
+                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S cp /tmp/phones_list.txt /etc/ci\"'"
 
                         // Out of rload, the sub-network-interfaces are not up
                         sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:m11 172.16.1.102 up\"'"

ci-scripts/main.py

@@ -614,10 +614,10 @@ class SSHConnection():
 			logging.debug('Using the OAI EPC Release 14 Cassandra-based HSS')
 			self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
 			self.command('echo ' + self.EPCPassword + ' | sudo -S mkdir -p logs', '\$', 5)
-			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss.log logs/hss*.* ping*.log iperf*.log', '\$', 5)
+			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss_' + self.testCase_id + '.log logs/hss*.*', '\$', 5)
 			self.command('echo "oai_hss -j /usr/local/etc/oai/hss_rel14.json" > ./my-hss.sh', '\$', 5)
 			self.command('chmod 755 ./my-hss.sh', '\$', 5)
-			self.command('sudo daemon --unsafe --name=hss_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/hss.log ./my-hss.sh', '\$', 5)
+			self.command('sudo daemon --unsafe --name=hss_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/hss_' + self.testCase_id + '.log ./my-hss.sh', '\$', 5)
 		elif re.match('OAI', self.EPCType, re.IGNORECASE):
 			logging.debug('Using the OAI EPC HSS')
 			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
@@ -644,10 +644,10 @@ class SSHConnection():
 		if re.match('OAI-Rel14-CUPS', self.EPCType, re.IGNORECASE):
 			logging.debug('Using the OAI EPC Release 14 MME')
 			self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
-			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f mme.log', '\$', 5)
+			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f mme_' + self.testCase_id + '.log', '\$', 5)
 			self.command('echo "./run_mme --config-file /usr/local/etc/oai/mme.conf --set-virt-if" > ./my-mme.sh', '\$', 5)
 			self.command('chmod 755 ./my-mme.sh', '\$', 5)
-			self.command('sudo daemon --unsafe --name=mme_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/mme.log ./my-mme.sh', '\$', 5)
+			self.command('sudo daemon --unsafe --name=mme_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/mme_' + self.testCase_id + '.log ./my-mme.sh', '\$', 5)
 		elif re.match('OAI', self.EPCType, re.IGNORECASE):
 			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
 			self.command('source oaienv', '\$', 5)
@@ -675,14 +675,14 @@ class SSHConnection():
 		if re.match('OAI-Rel14-CUPS', self.EPCType, re.IGNORECASE):
 			logging.debug('Using the OAI EPC Release 14 SPGW-CUPS')
 			self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
-			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f spgwc.log spgwu.log', '\$', 5)
+			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f spgwc_' + self.testCase_id + '.log spgwu_' + self.testCase_id + '.log', '\$', 5)
 			self.command('echo "spgwc -c /usr/local/etc/oai/spgw_c.conf" > ./my-spgwc.sh', '\$', 5)
 			self.command('chmod 755 ./my-spgwc.sh', '\$', 5)
-			self.command('sudo daemon --unsafe --name=spgwc_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwc.log ./my-spgwc.sh', '\$', 5)
+			self.command('sudo daemon --unsafe --name=spgwc_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwc_' + self.testCase_id + '.log ./my-spgwc.sh', '\$', 5)
 			time.sleep(5)
 			self.command('echo "spgwu -c /usr/local/etc/oai/spgw_u.conf" > ./my-spgwu.sh', '\$', 5)
 			self.command('chmod 755 ./my-spgwu.sh', '\$', 5)
-			self.command('sudo daemon --unsafe --name=spgwu_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwu.log ./my-spgwu.sh', '\$', 5)
+			self.command('sudo daemon --unsafe --name=spgwu_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwu_' + self.testCase_id + '.log ./my-spgwu.sh', '\$', 5)
 		elif re.match('OAI', self.EPCType, re.IGNORECASE):
 			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
 			self.command('source oaienv', '\$', 5)
@@ -1308,9 +1308,9 @@ class SSHConnection():
 			count = max_count
 			while count > 0:
 				if self.ADBCentralized:
-					self.command('stdbuf -o0 adb -s ' + device_id + ' shell "dumpsys telephony.registry" | grep mDataConnectionState', '\$', 15)
+					self.command('stdbuf -o0 adb -s ' + device_id + ' shell "dumpsys telephony.registry" | grep -m 1 mDataConnectionState', '\$', 15)
 				else:
-					self.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "dumpsys telephony.registry"\' | grep mDataConnectionState', '\$', 60)
+					self.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "dumpsys telephony.registry"\' | grep -m 1 mDataConnectionState', '\$', 60)
 				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
 				if result is None:
 					logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_epc_start.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
+	<htmlTabRef>epc-start-oai-ue</htmlTabRef>
+	<htmlTabName>EPC-Start-OAI-UE</htmlTabName>
 	<htmlTabIcon>log-in</htmlTabIcon>
 	<TestCaseRequestedList>
  050101 000001 060101 000001 070101

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_test_05mhz_tm1.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-05-tm1</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1</htmlTabName>
+	<htmlTabRef>test-05-tm1-oai-ue</htmlTabRef>
+	<htmlTabName>Test-05MHz-TM1-OAI-UE</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<repeatCount>4</repeatCount>
 	<TestCaseRequestedList>

ci-scripts/xml_files/inria/enb_usrp210_band7_epc_start.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-start</htmlTabRef>
+	<htmlTabName>EPC-Start</htmlTabName>
+	<htmlTabIcon>log-in</htmlTabIcon>
+	<TestCaseRequestedList>
+ 050102 000001 060102 000001 070102
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+    <testCase id="000001">
+        <class>IdleSleep</class>
+        <desc>Sleep</desc>
+        <idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
+    </testCase>
+
+	<testCase id="050102">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+	</testCase>
+
+	<testCase id="060102">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070102">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_epc_stop.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-stop</htmlTabRef>
+	<htmlTabName>EPC-Stop</htmlTabName>
+	<htmlTabIcon>log-out</htmlTabIcon>
+	<TestCaseRequestedList>
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_test_05mhz_tm1.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-05-tm1</htmlTabRef>
+	<htmlTabName>Test-05MHz-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>4</repeatCount>
+	<TestCaseRequestedList>
+ 030201
+ 030102 000002 040301 000002 040504 000001 040401 000002 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep for 10 sec</desc>
+		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="000002">
+		<class>IdleSleep</class>
+		<desc>Sleep for 3 sec</desc>
+		<idle_sleep_time_in_sec>3</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="030102">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --eNBs.[0].rrc_inactivity_threshold 0 --RUs.[0].max_rxgain 120 --eNBs.[0].component_carriers.[0].pusch_p0_Nominal -90 --eNBs.[0].component_carriers.[0].pucch_p0_Nominal -96 --eNBs.[0].tracking_area_code 600 --eNBs.[0].plmn_list.[0].mnc 95 --THREAD_STRUCT.[0].parallel_config PARALLEL_RU_L1_TRX_SPLIT</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+	<testCase id="040504">
+		<class>Ping</class>
+		<desc>ping (5MHz - 20 sec)</desc>
+		<ping_args>-I 192.168.248.159 -c 20</ping_args>
+		<ping_packetloss_threshold>5</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/1Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 1M -t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/12Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 12M -t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/1Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 1M -t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+	</testCase>
+
+</testCaseList>