Skip to content

O
OpenXG-RAN
Commit c4e43703 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

removing superflous parameter usrp_clrsrc from command line

parent 37fe6c74
Show whitespace changes
Inline Side-by-side
Showing with 4 additions and 46 deletions
executables/nr-softmodem-common.h
View file @ c4e43703
......@@ -58,7 +58,7 @@
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use a clock reference (0:internal(default), 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
......@@ -91,7 +91,6 @@
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_USRP_CLK_SRC "USRP clock source: 'internal' or 'external'\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
......
executables/nr-uesoftmodem.c
View file @ c4e43703
......@@ -225,7 +225,6 @@ int emulate_rf = 0;
tpool_t *Tpool;
char *usrp_args=NULL;
char *usrp_clksrc=NULL;
/* forward declarations */
void set_default_frame_parms(NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]);
......@@ -657,24 +656,6 @@ void init_openair0(void) {
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
if (usrp_clksrc) {
if (strcmp(usrp_clksrc, "internal") == 0) {
openair0_cfg[card].clock_source = internal;
LOG_D(PHY, "USRP clock source set as internal\n");
} else if (strcmp(usrp_clksrc, "external") == 0) {
openair0_cfg[card].clock_source = external;
LOG_D(PHY, "USRP clock source set as external\n");
} else if (strcmp(usrp_clksrc, "gpsdo") == 0) {
openair0_cfg[card].clock_source = gpsdo;
LOG_D(PHY, "USRP clock source set as gpsdo\n");
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source unknown ('%s'). defaulting to internal\n", usrp_clksrc);
}
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source not specified. defaulting to internal\n");
}
}
}
......
executables/nr-uesoftmodem.h
View file @ c4e43703
......@@ -50,8 +50,7 @@
{"ue-max-power", NULL, 0, iptr:&(tx_max_power[0]), defintval:90, TYPE_INT, 0}, \
{"r" , CONFIG_HLP_PRB, 0, iptr:&(frame_parms[0]->N_RB_DL), defintval:25, TYPE_UINT, 0}, \
{"dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, strptr:(char **)&usrp_args, defstrval:"type=b200", TYPE_STRING, 0}, \
{"usrp-clksrc", CONFIG_HLP_USRP_CLK_SRC,0, strptr:(char **)&usrp_clksrc, defstrval:"internal", TYPE_STRING, 0} \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, strptr:(char **)&usrp_args, defstrval:"type=b200", TYPE_STRING, 0} \
}
#define DEFAULT_DLF 2680000000
......
targets/RT/USER/lte-softmodem.h
View file @ c4e43703
......@@ -65,7 +65,7 @@
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal(default), 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
......@@ -99,7 +99,6 @@
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_USRP_CLK_SRC "USRP clock source: 'internal' or 'external'\n"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
......@@ -150,8 +149,7 @@
{"num-ues", NULL, 0, u8ptr:&(NB_UE_INST), defuintval:1, TYPE_UINT8, 0}, \
{"r" , CONFIG_HLP_PRB, 0, u8ptr:&(frame_parms[0]->N_RB_DL), defintval:25, TYPE_UINT8, 0}, \
{"dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, strptr:(char **)&usrp_args, defstrval:"type=b200", TYPE_STRING, 0}, \
{"usrp-clksrc", CONFIG_HLP_USRP_CLK_SRC,0, strptr:(char **)&usrp_clksrc, defstrval:"internal", TYPE_STRING, 0} \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, strptr:(char **)&usrp_args, defstrval:"type=b200", TYPE_STRING, 0} \
}
#define DEFAULT_DLF 2680000000
......
targets/RT/USER/lte-uesoftmodem.c
View file @ c4e43703
......@@ -224,7 +224,6 @@ char *parallel_config = NULL;
char *worker_config = NULL;
char* usrp_args=NULL;
char* usrp_clksrc=NULL;
static THREAD_STRUCT thread_struct;
void set_parallel_conf(char *parallel_conf)
......@@ -745,24 +744,6 @@ void init_openair0(LTE_DL_FRAME_PARMS *frame_parms,int rxgain) {
}
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
if (usrp_clksrc) {
if (strcmp(usrp_clksrc, "internal") == 0) {
openair0_cfg[card].clock_source = internal;
LOG_D(PHY, "USRP clock source set as internal\n");
} else if (strcmp(usrp_clksrc, "external") == 0) {
openair0_cfg[card].clock_source = external;
LOG_D(PHY, "USRP clock source set as external\n");
} else if (strcmp(usrp_clksrc, "gpsdo") == 0) {
openair0_cfg[card].clock_source = gpsdo;
LOG_D(PHY, "USRP clock source set as gpsdo\n");
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source unknown ('%s'). defaulting to internal\n", usrp_clksrc);
}
} else {
openair0_cfg[card].clock_source = internal;
LOG_I(PHY, "USRP clock source not specified. defaulting to internal\n");
}
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment