/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

#include <string.h>
#include <math.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>

#include "common/config/config_userapi.h"
#include "common/utils/LOG/log.h"
#include "common/ran_context.h" 

#include "SIMULATION/TOOLS/sim.h"
#include "SIMULATION/RF/rf.h"
#include "PHY/types.h"
#include "PHY/defs_nr_common.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/defs_gNB.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
#include "PHY/NR_REFSIG/nr_mod_table.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/NR_TRANSPORT/nr_transport.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"

#include "SCHED_NR/sched_nr.h"

#include "PHY/NR_UE_TRANSPORT/pucch_nr.h"


PHY_VARS_gNB *gNB;
PHY_VARS_NR_UE *UE;
RAN_CONTEXT_t RC;
openair0_config_t openair0_cfg[MAX_CARDS];

double cpuf;

// dummy functions
int nfapi_mode=0;
int oai_nfapi_hi_dci0_req(nfapi_hi_dci0_request_t *hi_dci0_req) { return(0);}
int oai_nfapi_tx_req(nfapi_tx_request_t *tx_req) { return(0); }

int oai_nfapi_dl_config_req(nfapi_dl_config_request_t *dl_config_req) { return(0); }

int oai_nfapi_ul_config_req(nfapi_ul_config_request_t *ul_config_req) { return(0); }

int oai_nfapi_nr_dl_config_req(nfapi_nr_dl_config_request_t *dl_config_req) {return(0);}

uint32_t from_nrarfcn(int nr_bandP,uint32_t dl_nrarfcn) {return(0);}
int32_t get_uldl_offset(int nr_bandP) {return(0);}

NR_IF_Module_t *NR_IF_Module_init(int Mod_id){return(NULL);}

void exit_function(const char* file, const char* function, const int line,const char *s) { 
   const char * msg= s==NULL ? "no comment": s;
   printf("Exiting at: %s:%d %s(), %s\n", file, line, function, msg); 
   exit(-1); 
}

// needed for some functions
PHY_VARS_NR_UE * PHY_vars_UE_g[1][1]={{NULL}};

int main(int argc, char **argv)
{

  char c;

  int i,aa;//,l;
  double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
  double cfo=0;
  uint8_t snr1set=0;
  int **txdata;
  double **s_re,**s_im,**r_re,**r_im;
  //  int sync_pos, sync_pos_slot;
  //  FILE *rx_frame_file;
  FILE *output_fd = NULL;
  uint8_t write_output_file=0;
  //int result;
  //int freq_offset;
  //  int subframe_offset;
  //  char fname[40], vname[40];
  int trial,n_trials=1,n_errors=0;
  uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
  uint16_t Nid_cell=0;
  uint64_t SSB_positions=0x01;

  channel_desc_t *gNB2UE;

  uint8_t extended_prefix_flag=0;
  int8_t interf1=-21,interf2=-21;

  FILE *input_fd=NULL,*pbch_file_fd=NULL;

  //uint32_t nsymb,tx_lev,tx_lev1 = 0,tx_lev2 = 0;
  //char input_val_str[50],input_val_str2[50];
  //uint8_t frame_mod4,num_pdcch_symbols = 0;
  //double pbch_sinr;
  //int pbch_tx_ant;

  SCM_t channel_model=AWGN;//Rayleigh1_anticorr;


  int N_RB_DL=273,mu=1;

  unsigned char frame_type = 0;
  unsigned char pbch_phase = 0;

  int frame=0,subframe=0;
  int frame_length_complex_samples;
  int frame_length_complex_samples_no_prefix;
  NR_DL_FRAME_PARMS *frame_parms;
  nfapi_nr_config_request_t *gNB_config;

  int loglvl=OAILOG_WARNING;

  cpuf = get_cpu_freq_GHz();

  if ( load_configmodule(argc,argv) == 0) {
    exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
  }

  randominit(0);

  while ((c = getopt (argc, argv, "f:hA:pf:g:i:j:n:o:s:S:t:x:y:z:N:F:GR:dP:IL:")) != -1) {
    switch (c) {
    case 'f':
      write_output_file=1;
      output_fd = fopen(optarg,"w");

      if (output_fd==NULL) {
        printf("Error opening %s\n",optarg);
        exit(-1);
      }

      break;

    case 'd':
      frame_type = 1;
      break;

    case 'g':
      switch((char)*optarg) {
      case 'A':
        channel_model=SCM_A;
        break;

      case 'B':
        channel_model=SCM_B;
        break;

      case 'C':
        channel_model=SCM_C;
        break;

      case 'D':
        channel_model=SCM_D;
        break;

      case 'E':
        channel_model=EPA;
        break;

      case 'F':
        channel_model=EVA;
        break;

      case 'G':
        channel_model=ETU;
        break;

      default:
        msg("Unsupported channel model!\n");
        exit(-1);
      }

      break;

    case 'i':
      interf1=atoi(optarg);
      break;

    case 'j':
      interf2=atoi(optarg);
      break;

    case 'n':
      n_trials = atoi(optarg);
      break;

    case 'o':
      cfo = atof(optarg);
      msg("Setting CFO to %f Hz\n",cfo);
      break;

    case 's':
      snr0 = atof(optarg);
      msg("Setting SNR0 to %f\n",snr0);
      break;

    case 'S':
      snr1 = atof(optarg);
      snr1set=1;
      msg("Setting SNR1 to %f\n",snr1);
      break;

      /*
      case 't':
      Td= atof(optarg);
      break;
      */
    case 'p':
      extended_prefix_flag=1;
      break;

      /*
      case 'r':
      ricean_factor = pow(10,-.1*atof(optarg));
      if (ricean_factor>1) {
        printf("Ricean factor must be between 0 and 1\n");
        exit(-1);
      }
      break;
      */
    case 'x':
      transmission_mode=atoi(optarg);

      if ((transmission_mode!=1) &&
          (transmission_mode!=2) &&
          (transmission_mode!=6)) {
        msg("Unsupported transmission mode %d\n",transmission_mode);
        exit(-1);
      }

      break;

    case 'y':
      n_tx=atoi(optarg);

      if ((n_tx==0) || (n_tx>2)) {
        msg("Unsupported number of tx antennas %d\n",n_tx);
        exit(-1);
      }

      break;

    case 'z':
      n_rx=atoi(optarg);

      if ((n_rx==0) || (n_rx>2)) {
        msg("Unsupported number of rx antennas %d\n",n_rx);
        exit(-1);
      }

      break;

    case 'N':
      Nid_cell = atoi(optarg);
      break;

    case 'R':
      N_RB_DL = atoi(optarg);
      break;

    case 'F':
      input_fd = fopen(optarg,"r");

      if (input_fd==NULL) {
        printf("Problem with filename %s\n",optarg);
        exit(-1);
      }

      break;

    case 'P':
      pbch_phase = atoi(optarg);

      if (pbch_phase>3)
        printf("Illegal PBCH phase (0-3) got %d\n",pbch_phase);

      break;

    case 'L':
      loglvl = atoi(optarg);
      break;

    default:
    case 'h':
      printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
             argv[0]);
      printf("-h This message\n");
      printf("-p Use extended prefix mode\n");
      printf("-d Use TDD\n");
      printf("-n Number of frames to simulate\n");
      printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB.  If n_frames is 1 then just SNR is simulated\n");
      printf("-S Ending SNR, runs from SNR0 to SNR1\n");
      printf("-t Delay spread for multipath channel\n");
      printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
      printf("-x Transmission mode (1,2,6 for the moment)\n");
      printf("-y Number of TX antennas used in eNB\n");
      printf("-z Number of RX antennas used in UE\n");
      printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
      printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
      printf("-o Carrier frequency offset in Hz\n");
      printf("-N Nid_cell\n");
      printf("-R N_RB_DL\n");
      printf("-O oversampling factor (1,2,4,8,16)\n");
      printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
      //    printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
      printf("-f Output filename (.txt format) for Pe/SNR results\n");
      printf("-F Input filename (.txt format) for RX conformance testing\n");
      exit (-1);
      break;
    }
  }

  logInit();
  set_glog(loglvl);
  T_stdout = 1;

  if (snr1set==0)
    snr1 = snr0+10;

  printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);

  RC.gNB = (PHY_VARS_gNB***) malloc(sizeof(PHY_VARS_gNB **));
  RC.gNB[0] = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
  RC.gNB[0][0] = malloc(sizeof(PHY_VARS_gNB));
  gNB = RC.gNB[0][0];
  gNB_config = &gNB->gNB_config;
  frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
  frame_parms->nb_antennas_tx = n_tx;
  frame_parms->nb_antennas_rx = n_rx;
  frame_parms->N_RB_DL = N_RB_DL;
  frame_parms->N_RB_UL = N_RB_DL;
  frame_parms->Nid_cell = Nid_cell;

  nr_phy_config_request_sim(gNB,N_RB_DL,N_RB_DL,mu,Nid_cell,SSB_positions);
  phy_init_nr_gNB(gNB,0,0);

  double fs,bw,scs,eps;

  if (mu == 1 && N_RB_DL == 217) { 
    fs = 122.88e6;
    bw = 80e6;
    scs = 30000;
  }					       
  else if (mu == 1 && N_RB_DL == 245) {
    fs = 122.88e6;
    bw = 90e6;
    scs = 30000;
  }
  else if (mu == 1 && N_RB_DL == 273) {
    fs = 122.88e6;
    bw = 100e6;
    scs = 30000;
  }
  else if (mu == 1 && N_RB_DL == 106) { 
    fs = 61.44e6;
    bw = 40e6;
    scs = 30000;
  }
  else AssertFatal(1==0,"Unsupported numerology for mu %d, N_RB %d\n",mu, N_RB_DL);

  // cfo with respect to sub-carrier spacing
  eps = cfo/scs;

  // computation of integer and fractional FO to compare with estimation results
  int IFO;
  if(eps!=0.0){
	printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
	if (eps>0)	
  	  IFO=(int)(eps+0.5);
	else
	  IFO=(int)(eps-0.5);
	printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
  }

  gNB2UE = new_channel_desc_scm(n_tx,
                                n_rx,
                                channel_model,
 				fs, 
				bw, 
                                0,
                                0,
                                0);

  if (gNB2UE==NULL) {
    msg("Problem generating channel model. Exiting.\n");
    exit(-1);
  }

  frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
  frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;

  s_re = malloc(2*sizeof(double*));
  s_im = malloc(2*sizeof(double*));
  r_re = malloc(2*sizeof(double*));
  r_im = malloc(2*sizeof(double*));
  txdata = malloc(2*sizeof(int*));

  for (i=0; i<2; i++) {

    s_re[i] = malloc(frame_length_complex_samples*sizeof(double));
    bzero(s_re[i],frame_length_complex_samples*sizeof(double));
    s_im[i] = malloc(frame_length_complex_samples*sizeof(double));
    bzero(s_im[i],frame_length_complex_samples*sizeof(double));

    r_re[i] = malloc(frame_length_complex_samples*sizeof(double));
    bzero(r_re[i],frame_length_complex_samples*sizeof(double));
    r_im[i] = malloc(frame_length_complex_samples*sizeof(double));
    bzero(r_im[i],frame_length_complex_samples*sizeof(double));

    printf("Allocating %d samples for txdata\n",frame_length_complex_samples);
    txdata[i] = malloc(frame_length_complex_samples*sizeof(int));
    bzero(r_re[i],frame_length_complex_samples*sizeof(int));
  
  }
  if (pbch_file_fd!=NULL) {
    load_pbch_desc(pbch_file_fd);
  }


  //configure UE
  UE = malloc(sizeof(PHY_VARS_NR_UE));
  memcpy(&UE->frame_parms,frame_parms,sizeof(NR_DL_FRAME_PARMS));
  //phy_init_nr_top(UE); //called from init_nr_ue_signal
                      
  UE->perfect_ce = 0;

  if(eps!=0.0)
	UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation

  if (init_nr_ue_signal(UE, 1, 0) != 0)
  {
    printf("Error at UE NR initialisation\n");
    exit(-1);
  }
  int16_t amp=0x1FFF;
  int nr_tti_tx=0; //According to standards it is Slot number within a frame for subcarrier spacing configuration μ but not sure why he made the variable name so 4.3.2,38.211
  nr_gold_pbch(UE);
  // generate signal
// pucch_config_common_nr should assign values for this if not done before structure in ue being used by functions
  uint8_t actual_payload=0,payload_received;//payload bits b7b6...b2b1b0 where b7..b3=0 b2b1=HARQ b0 is SR. payload maximum value is 7
  uint8_t mcs; 
  int nr_bit=1; // maximum value possible is 2
/*if(nr_bit==1){
       mcs=table1_mcs[actual_payload];
       }
 else{
       mcs=table2_mcs[actual_payload];
       }*/
  uint8_t m0=0;// higher layer paramater initial cyclic shift
  uint8_t nrofSymbols=1; //number of OFDM symbols can be 1-2 for format 1
  uint8_t startingSymbolIndex=0; // resource allocated see 9.2.1, 38.213 for more info.should be actually present in the resource set provided
  uint16_t startingPRB=5; //PRB number not sure see 9.2.1, 38.213 for more info. Should be actually present in the resource set provided
  pucch_GroupHopping_t PUCCH_GroupHopping=UE->pucch_config_common_nr->pucch_GroupHopping;
  uint32_t n_id=UE->pucch_config_common_nr->hoppingId;
  printf("\nsnr1=%f\n",snr1);
  for(SNR=snr0;SNR<=snr1;SNR=SNR+1){
    n_errors = 0;
    sigma2_dB = 20*log10((double)amp/32767)-SNR;
    sigma2 = pow(10,sigma2_dB/10);
    printf("entering SNR value %f\n",SNR);
    for (trial=0; trial<n_trials; trial++) {
      bzero(txdata[0],frame_length_complex_samples*sizeof(int));
      actual_payload=trial%4;
      if(nr_bit==1){
      	mcs=table1_mcs[actual_payload];
      }
      else{
        mcs=table2_mcs[actual_payload];
      }				
      nr_generate_pucch0(UE,txdata,frame_parms,UE->pucch_config_dedicated,amp,nr_tti_tx,m0,mcs,nrofSymbols,startingSymbolIndex,startingPRB);
		
      for (i=0; i<frame_length_complex_samples; i++) {
        r_re[0][i]=((double)(((int16_t *)txdata[0])[(i<<1)])/32767 + sqrt(sigma2/2)*gaussdouble(0.0,1.0));
	r_im[0][i]=((double)(((int16_t *)txdata[0])[(i<<1)+1])/32767 + sqrt(sigma2/2)*gaussdouble(0.0,1.0));
	if(r_re[0][i]<-1) 
          r_re[0][i]=-1; 
	else if(r_re[0][i]>1)
          r_re[0][i]=1;
	if(r_im[0][i]<-1) 
          r_im[0][i]=-1;
	else if(r_im[0][i]>1)
          r_im[0][0]=1;	
	((int16_t *)txdata[0])[(i<<1)]  = (int16_t)round(r_re[0][i]*32767);
	((int16_t *)txdata[0])[(i<<1)+1] =(int16_t)round(r_im[0][i]*32767);
		
      }
      nr_decode_pucch0(txdata,PUCCH_GroupHopping,n_id,&(payload_received),frame_parms,amp,nr_tti_tx,m0,nrofSymbols,startingSymbolIndex,startingPRB,nr_bit);
      n_errors=((actual_payload^payload_received)&1)+(((actual_payload^payload_received)&2)>>1)+(((actual_payload^payload_received)&4)>>2)+n_errors;
      //printf("actual_payload=%x,payload_received=%x",actual_payload,payload_received);
    }
    printf("SNR=%f, n_trials=%d, n_bit_errors=%d\n",SNR,n_trials,n_errors);
  }
  for (i=0; i<2; i++) {
    free(s_re[i]);
    free(s_im[i]);
    free(r_re[i]);
    free(r_im[i]);
    free(txdata[i]);
  }

  free(s_re);
  free(s_im);
  free(r_re);
  free(r_im);
  free(txdata);

  if (output_fd)
    fclose(output_fd);

  if (input_fd)
    fclose(input_fd);

  return(n_errors);

}