Skip to content

O
OpenXG-RAN
Commit 45de9e7b authored by rmagueta's avatar rmagueta
Browse files
Options

Merge remote-tracking branch 'origin/develop' into develop-NR_SA_F1AP_5GRECORDS

parents b34d8a1c 5d834473
Hide whitespace changes
Inline Side-by-side
Showing with 491 additions and 78 deletions
ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpn310.conf 0 → 100644
View file @ 45de9e7b
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
initialDLBWPstartSymbolAndLength_3 = 57; //43; //57;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -100;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1; #0x80;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7; //8; //7;
nrofDownlinkSymbols = 6; //0; //6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4; //0; //4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
port = 36412 ;
active = "yes";
preference = "ipv4";
}
);
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "CI_FR1_CTL_ENB_IP_ADDR";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "CI_GNB_IP_ADDR";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "CI_GNB_IP_ADDR";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "CI_GNB_IP_ADDR";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 6;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75; #114
eNB_instances = [0];
sdr_addrs = "addr=192.168.80.50"
clock_src = "internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
//parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
uicc: {
opc = "testopc";
};
ci-scripts/ran.py
View file @ 45de9e7b
......@@ -694,8 +694,8 @@ class RANManagement():
NSA_RAPROC_PUSCH_check = 0
#dlsch and ulsch statistics (dictionary)
dlsch_ulsch_stats = {}
#count "L1 thread not ready" msg
L1_thread_not_ready_cnt = 0
#real time statistics (dictionary)
real_time_stats = {}
#count "problem receiving samples" msg
pb_receiving_samples_cnt = 0
......@@ -857,16 +857,21 @@ class RANManagement():
#keys below are the markers we are loooking for, loop over this keys list
#everytime these markers are found in the log file, the previous ones are overwritten in the dict
#eventually we record and print only the last occurence
keys = {'dlsch_rounds','dlsch_total_bytes','ulsch_rounds','ulsch_total_bytes_scheduled'}
keys = {'UE ID','dlsch_rounds','dlsch_total_bytes','ulsch_rounds','ulsch_total_bytes_scheduled', 'scheduling timing stats'}
for k in keys:
result = re.search(k, line)
if result is not None:
#remove 1- all useless char before relevant info (ulsch or dlsch) 2- trailing char
dlsch_ulsch_stats[k]=re.sub(r'^.*\]\s+', r'' , line.rstrip())
#count "L1 thread not ready" msg
result = re.search('\[PHY\]\s+L1_thread isn\'t ready', str(line))
if result is not None:
L1_thread_not_ready_cnt += 1
#real time statistics
#same method as above
keys = {'feprx','feptx_prec','feptx_ofdm','feptx_total','L1 Tx processing','DLSCH encoding','L1 Rx processing','PUSCH inner-receiver','PUSCH decoding'}
for k in keys:
result = re.search(k, line)
if result is not None:
#remove 1- all useless char before relevant info 2- trailing char
tmp=re.match(rf'^.*?(\b{k}\b.*)',line.rstrip()) #from python 3.6 we can use literal string interpolation for the variable k, using rf' in the regex
real_time_stats[k]=tmp.group(1)
#count "problem receiving samples" msg
result = re.search('\[PHY\]\s+problem receiving samples', str(line))
if result is not None:
......@@ -897,15 +902,10 @@ class RANManagement():
statMsg = '[RAPROC] PUSCH with TC_RNTI message check for ' + nodeB_prefix + 'NB : PASS '
htmlMsg = statMsg+'\n'
else:
statMsg = '[RAPROC] PUSCH with TC_RNTI message check for ' + nodeB_prefix + 'NB : FAIL '
statMsg = '[RAPROC] PUSCH with TC_RNTI message check for ' + nodeB_prefix + 'NB : FAIL or not relevant'
htmlMsg = statMsg+'\n'
logging.debug(statMsg)
htmleNBFailureMsg += htmlMsg
#L1 thread not ready log
statMsg = '[PHY] L1 thread is not ready msg count = '+str(L1_thread_not_ready_cnt)
htmlMsg = statMsg+'\n'
logging.debug(statMsg)
htmleNBFailureMsg += htmlMsg
#problem receiving samples log
statMsg = '[PHY] problem receiving samples msg count = '+str(pb_receiving_samples_cnt)
htmlMsg = statMsg+'\n'
......@@ -920,6 +920,18 @@ class RANManagement():
logging.debug(dlsch_ulsch_stats[key])
htmleNBFailureMsg += statMsg
#real time statistics statistics
if len(real_time_stats)!=0: #check if dictionary is not empty
statMsg=''
for key in real_time_stats: #for each dictionary key
statMsg += real_time_stats[key] + '\n'
logging.debug(real_time_stats[key])
htmleNBFailureMsg += statMsg
else:
statMsg = 'No real time stats found in the log file\n'
logging.debug('No real time stats found in the log file')
htmleNBFailureMsg += statMsg
if uciStatMsgCount > 0:
statMsg = nodeB_prefix + 'NB showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)'
logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
......
ci-scripts/xml_files/gnb_phytest_usrp_run.xml 0 → 100644
View file @ 45de9e7b
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>gNB-PHY-Test</htmlTabRef>
<htmlTabName>Run-gNB-PHY-Test</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<repeatCount>2</repeatCount>
<TestCaseRequestedList>
090101 000001 090109
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="090101">
<class>Initialize_eNB</class>
<desc>Initialize gNB USRP</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf --phy-test -q -U 787200 -T 106 -t 28 -D 130175 -m 28 -M 106</Initialize_eNB_args>
<air_interface>NR</air_interface>
</testCase>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>180</idle_sleep_time_in_sec>
</testCase>
<testCase id="090109">
<class>Terminate_eNB</class>
<desc>Terminate gNB</desc>
<air_interface>NR</air_interface>
</testCase>
</testCaseList>
cmake_targets/CMakeLists.txt
View file @ 45de9e7b
......@@ -2830,8 +2830,6 @@ endif (${T_TRACER})
#This rule and the following deal with it.
add_custom_command (
OUTPUT ${OPENAIR_DIR}/common/utils/T/T_IDs.h
COMMAND make clean
COMMAND make -j2
COMMAND make check_vcd
WORKING_DIRECTORY ${OPENAIR_DIR}/common/utils/T
DEPENDS ${OPENAIR_DIR}/common/utils/T/T_messages.txt
......@@ -2839,6 +2837,10 @@ add_custom_command (
${OPENAIR_DIR}/common/utils/LOG/vcd_signal_dumper.h
)
execute_process (
COMMAND make check_vcd
WORKING_DIRECTORY ${OPENAIR_DIR}/common/utils/T
)
#This rule is specifically needed to generate T files
#before anything else in a project that uses the T.
#See below, there are some 'add_dependencies' showing that.
......
common/utils/T/Makefile
View file @ 45de9e7b
......@@ -18,7 +18,7 @@ T_messages.txt.h: T_messages.txt
T_IDs.h: $(GENIDS) T_messages.txt
./$(GENIDS) T_messages.txt T_IDs.h
check_vcd:
check_vcd: T_IDs.h T_messages.txt.h
gcc -Wall -I. -I.. -I../itti -I../../../openair2/COMMON -Itracer -o _check_vcd check_vcd.c tracer/database.c tracer/utils.c -lm -pthread
./_check_vcd || (rm -f ./_check_vcd ./T_IDs.h ./T_messages.txt.h && false)
rm -f ./_check_vcd
......
executables/nr-gnb.c
View file @ 45de9e7b
......@@ -230,16 +230,6 @@ void rx_func(void *param) {
rnti_to_remove_count = 0;
if (pthread_mutex_unlock(&rnti_to_remove_mutex)) exit(1);
// Call the scheduler
pthread_mutex_lock(&gNB->UL_INFO_mutex);
gNB->UL_INFO.frame = frame_rx;
gNB->UL_INFO.slot = slot_rx;
gNB->UL_INFO.module_id = gNB->Mod_id;
gNB->UL_INFO.CC_id = gNB->CC_id;
gNB->if_inst->NR_UL_indication(&gNB->UL_INFO);
pthread_mutex_unlock(&gNB->UL_INFO_mutex);
// RX processing
int tx_slot_type = nr_slot_select(cfg,frame_tx,slot_tx);
int rx_slot_type = nr_slot_select(cfg,frame_rx,slot_rx);
......@@ -266,6 +256,18 @@ void rx_func(void *param) {
stop_meas( &softmodem_stats_rxtx_sf );
LOG_D(PHY,"%s() Exit proc[rx:%d%d tx:%d%d]\n", __FUNCTION__, frame_rx, slot_rx, frame_tx, slot_tx);
// Call the scheduler
start_meas(&gNB->ul_indication_stats);
pthread_mutex_lock(&gNB->UL_INFO_mutex);
gNB->UL_INFO.frame = frame_rx;
gNB->UL_INFO.slot = slot_rx;
gNB->UL_INFO.module_id = gNB->Mod_id;
gNB->UL_INFO.CC_id = gNB->CC_id;
gNB->if_inst->NR_UL_indication(&gNB->UL_INFO);
pthread_mutex_unlock(&gNB->UL_INFO_mutex);
stop_meas(&gNB->ul_indication_stats);
notifiedFIFO_elt_t *res;
if (tx_slot_type == NR_DOWNLINK_SLOT || tx_slot_type == NR_MIXED_SLOT) {
......@@ -325,18 +327,24 @@ static void *process_stats_thread(void *param) {
PHY_VARS_gNB *gNB = (PHY_VARS_gNB *)param;
reset_meas(&gNB->phy_proc_tx);
reset_meas(&gNB->dlsch_encoding_stats);
reset_meas(&gNB->dlsch_scrambling_stats);
reset_meas(&gNB->dlsch_modulation_stats);
reset_meas(&gNB->phy_proc_rx);
reset_meas(&gNB->ul_indication_stats);
reset_meas(&gNB->rx_pusch_stats);
reset_meas(&gNB->ulsch_decoding_stats);
wait_sync("process_stats_thread");
while(!oai_exit)
{
sleep(1);
print_meas(&gNB->dlsch_encoding_stats, "pdsch_encoding", NULL, NULL);
print_meas(&gNB->dlsch_scrambling_stats, "pdsch_scrambling", NULL, NULL);
print_meas(&gNB->dlsch_modulation_stats, "pdsch_modulation", NULL, NULL);
print_meas(&gNB->phy_proc_tx, "L1 Tx processing", NULL, NULL);
print_meas(&gNB->dlsch_encoding_stats, "DLSCH encoding", NULL, NULL);
print_meas(&gNB->phy_proc_rx, "L1 Rx processing", NULL, NULL);
print_meas(&gNB->ul_indication_stats, "UL Indication", NULL, NULL);
print_meas(&gNB->rx_pusch_stats, "PUSCH inner-receiver", NULL, NULL);
print_meas(&gNB->ulsch_decoding_stats, "PUSCH decoding", NULL, NULL);
}
return(NULL);
}
......
executables/nr-softmodem-common.h
View file @ 45de9e7b
......@@ -68,11 +68,15 @@
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_DLMCS_PHYTEST "Set the downlink MCS for PHYTEST mode\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_ULMCS_PHYTEST "Set the uplink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLBW_PHYTEST "Set the number of PRBs used for DLSCH in PHYTEST mode\n"
#define CONFIG_HLP_ULBW_PHYTEST "Set the number of PRBs used for ULSCH in PHYTEST mode\n"
#define CONFIG_HLP_DLBM_PHYTEST "Bitmap for DLSCH slots (slot 0 starts at LSB)\n"
#define CONFIG_HLP_ULBM_PHYTEST "Bitmap for ULSCH slots (slot 0 starts at LSB)\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
......
executables/nr-softmodem.c
View file @ 45de9e7b
......@@ -161,8 +161,6 @@ int otg_enabled;
//static NR_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs];
//static nfapi_nr_config_request_t *config[MAX_NUM_CCs];
uint32_t target_dl_mcs = 28; //maximum allowed mcs
uint32_t target_ul_mcs = 20;
uint32_t timing_advance = 0;
uint64_t num_missed_slots=0; // counter for the number of missed slots
......
executables/nr-softmodem.h
View file @ 45de9e7b
......@@ -21,12 +21,24 @@
{"single-thread-disable", CONFIG_HLP_NOSNGLT, PARAMFLAG_BOOL, iptr:&single_thread_flag, defintval:1, TYPE_INT, 0}, \
{"A" , CONFIG_HLP_TADV, 0, uptr:&timing_advance, defintval:0, TYPE_UINT, 0}, \
{"E" , CONFIG_HLP_TQFS, PARAMFLAG_BOOL, i8ptr:&threequarter_fs, defintval:0, TYPE_INT8, 0}, \
{"m" , CONFIG_HLP_DLMCS_PHYTEST,0, uptr:&target_dl_mcs, defintval:0, TYPE_UINT, 0}, \
{"t" , CONFIG_HLP_ULMCS_PHYTEST,0, uptr:&target_ul_mcs, defintval:0, TYPE_UINT, 0}, \
{"M" , CONFIG_HLP_DLBW_PHYTEST,0, uptr:&target_dl_bw, defintval:0, TYPE_UINT, 0}, \
{"T" , CONFIG_HLP_ULBW_PHYTEST,0, uptr:&target_ul_bw, defintval:0, TYPE_UINT, 0}, \
{"D" , CONFIG_HLP_DLBM_PHYTEST,0, u64ptr:&dlsch_slot_bitmap, defintval:0, TYPE_UINT64, 0}, \
{"U" , CONFIG_HLP_ULBM_PHYTEST,0, u64ptr:&ulsch_slot_bitmap, defintval:0, TYPE_UINT64, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, iptr:&usrp_tx_thread, defstrval:0, TYPE_INT, 0}, \
{"s" , CONFIG_HLP_SNR, 0, dblptr:&snr_dB, defdblval:25, TYPE_DOUBLE, 0}, \
}
#include "threads_t.h"
extern threads_t threads;
extern uint32_t target_dl_mcs;
extern uint32_t target_ul_mcs;
extern uint32_t target_dl_bw;
extern uint32_t target_ul_bw;
extern uint64_t dlsch_slot_bitmap;
extern uint64_t ulsch_slot_bitmap;
// In nr-gnb.c
extern void init_gNB(int single_thread_flag,int wait_for_sync);
......
nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface_scf.h
View file @ 45de9e7b
......@@ -691,7 +691,7 @@ typedef struct
typedef struct
{
uint16_t pm_idx;//Index to precoding matrix (PM) pre-stored at cell configuration. Note: If precoding is not used this parameter should be set to 0. Value: 0->65535.
nfapi_nr_dig_bf_interface_t dig_bf_interface_list[255];//max dig_bf_interfaces
nfapi_nr_dig_bf_interface_t dig_bf_interface_list[1];//max dig_bf_interfaces
}nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t;
......@@ -702,7 +702,7 @@ typedef struct
uint16_t prg_size;//Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
//watchout: dig_bf_interfaces here, in table 3-53 it's dig_bf_interface
uint8_t dig_bf_interfaces;//Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t prgs_list[275];//max prg_size
nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t prgs_list[1];//max prg_size
}nfapi_nr_tx_precoding_and_beamforming_t;
......
openair1/PHY/LTE_ESTIMATION/lte_sync_time.c
View file @ 45de9e7b
......@@ -86,7 +86,7 @@ static void copyPrimary( struct complex16 *out, struct complex16 *in, int ofdmSi
}
int lte_sync_time_init(LTE_DL_FRAME_PARMS *frame_parms ) { // LTE_UE_COMMON *common_vars
struct complex16 syncF_tmp[2048]__attribute__((aligned(32)))= {0};
struct complex16 syncF_tmp[2048]__attribute__((aligned(32)))= {{0}};
int sz=frame_parms->ofdm_symbol_size*sizeof(*primary_synch0_time);
AssertFatal( NULL != (primary_synch0_time = (struct complex16 *)malloc16(sz)),"");
bzero(primary_synch0_time,sz);
......@@ -153,7 +153,7 @@ int lte_sync_time(int **rxdata, ///rx data in time domain
// perform a time domain correlation using the oversampled sync sequence
unsigned int n, ar, s, peak_pos, peak_val, sync_source;
int result,result2;
struct complexd sync_out[3]= {0}, sync_out2[3]= {0};
struct complexd sync_out[3]= {{0}}, sync_out2[3]= {{0}};
int length = LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti>>1;
peak_val = 0;
peak_pos = 0;
......
openair1/PHY/TOOLS/time_meas.c
View file @ 45de9e7b
......@@ -103,10 +103,11 @@ void print_meas(time_stats_t *ts,
if (ts->trials>0) {
//printf("%20s: total: %10.3f ms, average: %10.3f us (%10d trials)\n", name, ts->diff/cpu_freq_GHz/1000000.0, ts->diff/ts->trials/cpu_freq_GHz/1000.0, ts->trials);
if ((total_exec_time == NULL) || (sf_exec_time== NULL)) {
fprintf(stderr, "%25s: %15.3f us; %15d;\n",
fprintf(stderr, "%25s: %15.3f us; %15d; %15.3f us;\n",
name,
(ts->diff/ts->trials/cpu_freq_GHz/1000.0),
ts->trials);
ts->trials,
ts->max/cpu_freq_GHz/1000.0);
} else {
fprintf(stderr, "%25s: %15.3f ms (%5.2f%%); %15.3f us (%5.2f%%); %15d;\n",
name,
......
openair1/PHY/defs_gNB.h
View file @ 45de9e7b
......@@ -854,6 +854,7 @@ typedef struct PHY_VARS_gNB_s {
time_stats_t dlsch_segmentation_stats;
time_stats_t rx_pusch_stats;
time_stats_t ul_indication_stats;
time_stats_t ulsch_decoding_stats;
time_stats_t ulsch_rate_unmatching_stats;
time_stats_t ulsch_ldpc_decoding_stats;
......
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 45de9e7b
......@@ -194,6 +194,8 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,0);
}
if (do_meas==1) stop_meas(&gNB->phy_proc_tx);
if ((frame&127) == 0) dump_pdsch_stats(gNB);
//apply the OFDM symbol rotation here
......@@ -549,6 +551,8 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
int power_rxF = signal_energy_nodc(&gNB->common_vars.rxdataF[0][offset+(47*12)],12*18);
LOG_D(PHY,"frame %d, slot %d: UL signal energy %d\n",frame_rx,slot_rx,power_rxF);
start_meas(&gNB->phy_proc_rx);
for (int i=0;i<NUMBER_OF_NR_PUCCH_MAX;i++){
NR_gNB_PUCCH_t *pucch = gNB->pucch[i];
if (pucch) {
......@@ -655,7 +659,7 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
start_meas(&gNB->rx_pusch_stats);
for(uint8_t symbol = symbol_start; symbol < symbol_end; symbol++) {
no_sig = nr_rx_pusch(gNB, ULSCH_id, frame_rx, slot_rx, symbol, harq_pid);
if (no_sig) {
if (no_sig && (get_softmodem_params()->phy_test == 0)) {
LOG_I(PHY, "PUSCH not detected in symbol %d\n",symbol);
nr_fill_indication(gNB,frame_rx, slot_rx, ULSCH_id, harq_pid, 1);
return;
......@@ -673,6 +677,7 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
}
}
}
stop_meas(&gNB->phy_proc_rx);
// figure out a better way to choose slot_rx, 19 is ok for a particular TDD configuration with 30kHz SCS
if (pucch_decode_done || pusch_decode_done) {
T(T_GNB_PHY_PUCCH_PUSCH_IQ, T_INT(frame_rx), T_INT(slot_rx), T_BUFFER(&gNB->common_vars.rxdataF[0][0], gNB->frame_parms.symbols_per_slot * gNB->frame_parms.ofdm_symbol_size * 4));
......
openair1/SIMULATION/NR_PHY/dlsim.c
View file @ 45de9e7b
......@@ -277,7 +277,7 @@ int main(int argc, char **argv)
//float psnr;
float eff_tp_check = 0.7;
uint8_t snrRun;
uint32_t TBS;
uint32_t TBS = 0;
int **txdata;
double **s_re,**s_im,**r_re,**r_im;
//double iqim = 0.0;
......@@ -995,7 +995,7 @@ int main(int argc, char **argv)
if (run_initial_sync)
nr_common_signal_procedures(gNB,frame,slot,gNB->ssb[0].ssb_pdu);
else
phy_procedures_gNB_TX(gNB,frame,slot,0);
phy_procedures_gNB_TX(gNB,frame,slot,1);
int txdataF_offset = (slot%2) * frame_parms->samples_per_slot_wCP;
......
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ 45de9e7b
......@@ -66,6 +66,7 @@ uint8_t const nr_rv_round_map[4] = {0, 2, 1, 3};
uint8_t const nr_rv_round_map_ue[4] = {0, 2, 1, 3};
uint64_t get_softmodem_optmask(void) {return 0;}
softmodem_params_t *get_softmodem_params(void) {return 0;}
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
......
openair1/SIMULATION/NR_PHY/ulsim.c
View file @ 45de9e7b
......@@ -1170,7 +1170,6 @@ int main(int argc, char **argv)
gNB->UL_INFO.rx_ind.number_of_pdus = 0;
gNB->UL_INFO.crc_ind.number_crcs = 0;
start_meas(&gNB->phy_proc_rx);
phy_procedures_gNB_common_RX(gNB, frame, slot);
phy_procedures_gNB_uespec_RX(gNB, frame, slot);
......@@ -1202,7 +1201,6 @@ int main(int argc, char **argv)
LOG_M("rxsigF0_llr.m","rxsF0_llr",
&gNB->pusch_vars[0]->llr[0],(nb_symb_sch-1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size * mod_order,1,0);
}
start_meas(&gNB->phy_proc_rx);
////////////////////////////////////////////////////////////
if (gNB->ulsch[0][0]->last_iteration_cnt >=
......
openair2/GNB_APP/gnb_paramdef.h
View file @ 45de9e7b
......@@ -321,12 +321,12 @@ typedef enum {
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*--------------------------------------------------------------------------------------------------------------------------------------------------*/
#define GNBNETPARAMS_DESC { \
{GNB_CONFIG_STRING_GNB_INTERFACE_NAME_FOR_NG_AMF, NULL, 0, strptr:NULL, defstrval:"lo", TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_IPV4_ADDRESS_FOR_NG_AMF, NULL, 0, strptr:NULL, defstrval:"127.0.0.1", TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_INTERFACE_NAME_FOR_NGU, NULL, 0, strptr:NULL, defstrval:"lo", TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_IPV4_ADDR_FOR_NGU, NULL, 0, strptr:NULL, defstrval:"127.0.0.1", TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_INTERFACE_NAME_FOR_NG_AMF, NULL, 0, strptr:NULL, defstrval:NULL, TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_IPV4_ADDRESS_FOR_NG_AMF, NULL, 0, strptr:NULL, defstrval:NULL, TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_INTERFACE_NAME_FOR_NGU, NULL, 0, strptr:NULL, defstrval:NULL, TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_IPV4_ADDR_FOR_NGU, NULL, 0, strptr:NULL, defstrval:NULL, TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_GNB_PORT_FOR_NGU, NULL, 0, uptr:NULL, defintval:2152L, TYPE_UINT, 0}, \
{GNB_CONFIG_STRING_ENB_IPV4_ADDR_FOR_X2C, NULL, 0, strptr:NULL, defstrval:"127.0.0.1", TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_ENB_IPV4_ADDR_FOR_X2C, NULL, 0, strptr:NULL, defstrval:NULL, TYPE_STRING, 0}, \
{GNB_CONFIG_STRING_ENB_PORT_FOR_X2C, NULL, 0, uptr:NULL, defintval:0L, TYPE_UINT, 0} \
}
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c
View file @ 45de9e7b
......@@ -53,6 +53,7 @@
#include "executables/softmodem-common.h"
#include "nfapi/oai_integration/vendor_ext.h"
#include "executables/nr-softmodem.h"
uint16_t nr_pdcch_order_table[6] = { 31, 31, 511, 2047, 2047, 8191 };
......@@ -91,6 +92,7 @@ void dump_mac_stats(gNB_MAC_INST *gNB)
LOG_I(MAC, "UE %d: LCID %d: %d bytes RX\n", UE_id, lc_id, stats->lc_bytes_rx[lc_id]);
}
}
print_meas(&gNB->eNB_scheduler, "DL & UL scheduling timing stats", NULL, NULL);
}
void clear_nr_nfapi_information(gNB_MAC_INST * gNB,
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c
View file @ 45de9e7b
......@@ -255,12 +255,17 @@ void nr_schedule_css_dlsch_phytest(module_id_t module_idP,
}
}
extern int getNrOfSymbols(NR_BWP_Downlink_t *bwp, int tda);
extern uint8_t getN_PRB_DMRS(NR_BWP_Downlink_t *bwp, int numDmrsCdmGrpsNoData);
uint32_t target_dl_mcs = 9;
uint32_t target_dl_bw = 50;
uint64_t dlsch_slot_bitmap = (1<<1);
/* schedules whole bandwidth for first user, all the time */
void nr_preprocessor_phytest(module_id_t module_id,
frame_t frame,
sub_frame_t slot)
{
if (slot != 1)
if (!is_xlsch_in_slot(dlsch_slot_bitmap, slot))
return;
NR_UE_info_t *UE_info = &RC.nrmac[module_id]->UE_info;
NR_ServingCellConfigCommon_t *scc = RC.nrmac[module_id]->common_channels[0].ServingCellConfigCommon;
......@@ -274,24 +279,25 @@ void nr_preprocessor_phytest(module_id_t module_id,
/* find largest unallocated chunk */
const int bwpSize = NRRIV2BW(sched_ctrl->active_bwp->bwp_Common->genericParameters.locationAndBandwidth, MAX_BWP_SIZE);
int rbStart = 0;
int tStart = 0;
int rbSize = 0;
uint16_t *vrb_map = RC.nrmac[module_id]->common_channels[CC_id].vrb_map;
/* find largest unallocated RB region */
do {
/* loop ensures that we allocate exactly target_dl_bw, or return */
while (true) {
/* advance to first free RB */
while (tStart < bwpSize && vrb_map[tStart])
tStart++;
/* find maximum rbSize at current rbStart */
int tSize = 1;
while (tStart + tSize < bwpSize && !vrb_map[tStart + tSize])
tSize++;
if (tSize > rbSize) {
rbStart = tStart;
rbSize = tSize;
}
tStart += tSize;
} while (tStart < bwpSize);
while (rbStart < bwpSize && vrb_map[rbStart])
rbStart++;
rbSize = 1;
/* iterate until we are at target_dl_bw or no available RBs */
while (rbStart + rbSize < bwpSize && !vrb_map[rbStart + rbSize] && rbSize < target_dl_bw)
rbSize++;
/* found target_dl_bw? */
if (rbSize == target_dl_bw)
break;
/* at end and below target_dl_bw? */
if (rbStart + rbSize >= bwpSize)
return;
rbStart += rbSize;
}
sched_ctrl->num_total_bytes = 0;
const int lcid = DL_SCH_LCID_DTCH;
......@@ -364,7 +370,7 @@ void nr_preprocessor_phytest(module_id_t module_id,
else
sched_ctrl->mcsTableIdx = 2;
}
sched_ctrl->mcs = 9;
sched_ctrl->mcs = target_dl_mcs;
sched_ctrl->numDmrsCdmGrpsNoData = 1;
/* get the PID of a HARQ process awaiting retransmission, or -1 otherwise */
sched_ctrl->dl_harq_pid = sched_ctrl->retrans_dl_harq.head;
......@@ -374,6 +380,9 @@ void nr_preprocessor_phytest(module_id_t module_id,
vrb_map[rb + sched_ctrl->rbStart] = 1;
}
uint32_t target_ul_mcs = 9;
uint32_t target_ul_bw = 50;
uint64_t ulsch_slot_bitmap = (1<<8);
bool nr_ul_preprocessor_phytest(module_id_t module_id,
frame_t frame,
sub_frame_t slot,
......@@ -410,19 +419,20 @@ bool nr_ul_preprocessor_phytest(module_id_t module_id,
/* check if slot is UL, and that slot is 8 (assuming K2=6 because of UE
* limitations). Note that if K2 or the TDD configuration is changed, below
* conditions might exclude each other and never be true */
if (!(is_xlsch_in_slot(ulsch_in_slot_bitmap, sched_slot) && sched_slot == 8))
if (!is_xlsch_in_slot(ulsch_slot_bitmap, sched_slot))
return false;
const int bw = NRRIV2BW(sched_ctrl->active_ubwp->bwp_Common->genericParameters.locationAndBandwidth, MAX_BWP_SIZE);
uint16_t rbStart = 0;
uint16_t rbSize = 50; /* due to OAI UE limitations */
if (rbSize>bw)
rbSize = bw;
uint16_t rbSize = target_ul_bw;
uint16_t *vrb_map_UL =
&RC.nrmac[module_id]->common_channels[CC_id].vrb_map_UL[sched_slot * MAX_BWP_SIZE];
const int startSymbolAndLength = tdaList->list.array[tda]->startSymbolAndLength;
int startSymbolIndex, nrOfSymbols;
SLIV2SL(startSymbolAndLength, &startSymbolIndex, &nrOfSymbols);
const uint16_t symb = ((1 << nrOfSymbols) - 1) << startSymbolIndex;
for (int i = rbStart; i < rbStart + rbSize; ++i) {
if (vrb_map_UL[i]) {
if ((vrb_map_UL[i] & symb) != 0) {
LOG_E(MAC,
"%s(): %4d.%2d RB %d is already reserved, cannot schedule UE\n",
__func__,
......@@ -478,7 +488,7 @@ bool nr_ul_preprocessor_phytest(module_id_t module_id,
num_dmrs_cdm_grps_no_data,
ps);
const int mcs = 9;
const int mcs = target_ul_mcs;
NR_sched_pusch_t *sched_pusch = &sched_ctrl->sched_pusch;
sched_pusch->mcs = mcs;
sched_pusch->rbStart = rbStart;
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c
View file @ 45de9e7b
......@@ -983,7 +983,7 @@ void handle_nr_uci_pucch_0_1(module_id_t mod_id,
for (int harq_bit = 0; harq_bit < uci_01->harq->num_harq; harq_bit++) {
const uint8_t harq_value = uci_01->harq->harq_list[harq_bit].harq_value;
const uint8_t harq_confidence = uci_01->harq->harq_confidence_level;
const int feedback_slot = (slot - 1 + num_slots) % num_slots;
const int feedback_slot = (slot + num_slots) % num_slots;
/* In case of realtime problems: we can only identify a HARQ process by
* timing. If the HARQ process's feedback_slot is not the one we
* expected, we assume that processing has been aborted and we need to
......@@ -1040,7 +1040,7 @@ void handle_nr_uci_pucch_2_3_4(module_id_t mod_id,
// iterate over received harq bits
for (int harq_bit = 0; harq_bit < uci_234->harq.harq_bit_len; harq_bit++) {
const int acknack = ((uci_234->harq.harq_payload[harq_bit >> 3]) >> harq_bit) & 0x01;
const int feedback_slot = (slot - 1 + num_slots) % num_slots;
const int feedback_slot = (slot + num_slots) % num_slots;
/* In case of realtime problems: we can only identify a HARQ process by
* timing. If the HARQ process's feedback_slot is not the one we
* expected, we assume that processing has been aborted and we need to
......
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ 45de9e7b
......@@ -597,7 +597,8 @@ int trx_usrp_write_init(openair0_device *device){
write_thread->end = 0;
write_thread->count_write = 0;
printf("end of tx write thread\n");
pthread_mutex_init(&write_thread->mutex_write, NULL);
pthread_cond_init(&write_thread->cond_write, NULL);
pthread_create(&write_thread->pthread_write,NULL,trx_usrp_write_thread,(void *)device);
return(0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment