################################################################################ # # Copyright (c) 2015, EURECOM (www.eurecom.fr) # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # 1. Redistributions of source code must retain the above copyright notice, this # list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright notice, # this list of conditions and the following disclaimer in the documentation # and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE # DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # The views and conclusions contained in the software and documentation are those # of the authors and should not be interpreted as representing official policies, # either expressed or implied, of the FreeBSD Project. # ################################################################################ # file build_helper # brief # authors Laurent Thomas, Lionel GAUTHIER # ####################################### SUDO='sudo -E' ############################### ## echo and family ############################### black='\E[30m' red='\E[31m' green='\E[32m' yellow='\E[33m' blue='\E[1;34m' magenta='\E[35m' cyan='\E[36m' white='\E[37m' reset_color='\E[00m' COLORIZE=1 cecho() { # Color-echo # arg1 = message # arg2 = color local default_msg="No Message." message=${1:-$default_msg} color=${2:-$green} [ "$COLORIZE" = "1" ] && message="$color$message$reset_color" echo -e "$message" return } echo_error() { cecho "$*" $red ;} echo_fatal() { cecho "$*" $red; exit -1 ;} echo_warning() { cecho "$*" $yellow ;} echo_success() { cecho "$*" $green ;} echo_info() { cecho "$*" $blue ;} ########################### # Cleaners ########################### clean_kernel() { $SUDO modprobe ip_tables $SUDO modprobe x_tables $SUDO iptables -P INPUT ACCEPT $SUDO iptables -F INPUT $SUDO iptables -P OUTPUT ACCEPT $SUDO iptables -F OUTPUT $SUDO iptables -P FORWARD ACCEPT $SUDO iptables -F FORWARD $SUDO iptables -t nat -F $SUDO iptables -t mangle -F $SUDO iptables -t filter -F $SUDO iptables -t raw -F echo_info "Flushed iptables" $SUDO rmmod nasmesh > /dev/null 2>&1 $SUDO rmmod oai_nw_drv > /dev/null 2>&1 $SUDO rmmod openair_rf > /dev/null 2>&1 $SUDO rmmod ue_ip > /dev/null 2>&1 echo_info "removed drivers from kernel" } clean_all_files() { set_openair_env dir=$OPENAIR_DIR/cmake_targets rm -rf $dir/log $OPENAIR_DIR/targets/bin/* rm -rf $dir/lte_build_oai $dir/lte-simulators/build rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build } ################################### # Compilers ################################### compilations() { cd $OPENAIR_DIR/cmake_targets/$1/build { rm -f $3 if [ "$VERBOSE_COMPILE" == "1" ]; then make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE else make -j`nproc` $2 fi } > $dlog/$2.$REL.txt 2>&1 echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt" if [ -s $3 ] ; then cp $3 $4 echo_success "$2 compiled" else echo_error "$2 compilation failed" fi } ############################################ # External packages installers ############################################ install_nettle_from_source() { cd /tmp echo "Downloading nettle archive" rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5 wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz tar -xzf nettle-2.5.tar.gz cd nettle-2.5/ ./configure --disable-openssl --enable-shared --prefix=/usr echo "Compiling nettle" make -j`nproc` make check $SUDO make install rm -rf /tmp/nettle-2.5.tar.gz /tmp/nettle-2.5 } install_gnutls_from_source(){ cd /tmp echo "Downloading gnutls archive" rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23 wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz tar -xzf gnutls-3.1.23.tar.xz cd gnutls-3.1.23/ ./configure --prefix=/usr echo "Compiling gnutls" make -j`nproc` $SUDO make install rm -rf /tmp/gnutls-3.1.23.tar.xz /tmp/gnutls-3.1.23 } check_install_usrp_uhd_driver(){ #first we remove old installation $SUDO apt-get remove uhd libuhd-dev libuhd003 uhd-host -y v=$(lsb_release -cs) $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main" #The new USRP repository $SUDO add-apt-repository ppa:ettusresearch/uhd -y $SUDO apt-get update $SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev $SUDO apt-get -y install libuhd-dev libuhd003 uhd-host $SUDO uhd_images_downloader } check_install_bladerf_driver(){ $SUDO add-apt-repository -y ppa:bladerf/bladerf $SUDO apt-get update $SUDO apt-get install -y bladerf libbladerf-dev $SUDO apt-get install -y bladerf-firmware-fx3 $SUDO apt-get install -y bladerf-fpga-hostedx40 $SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img } check_install_additional_tools (){ $SUDO apt-get update $SUDO apt-get install -y \ check \ dialog \ dkms \ gawk \ libboost-all-dev \ libpthread-stubs0-dev \ openvpn \ pkg-config \ python-dev \ python-pexpect \ sshfs \ swig \ tshark \ uml-utilities \ unzip \ valgrind \ vlan \ ctags \ ntpdate } check_install_oai_software() { $SUDO apt-get update $SUDO apt-get install -y \ autoconf \ automake \ bison \ build-essential \ cmake \ cmake-curses-gui \ doxygen \ doxygen-gui \ texlive-latex-base \ ethtool \ flex \ gccxml \ gdb \ git \ graphviz \ gtkwave \ guile-2.0-dev \ iperf \ iproute \ iptables \ iptables-dev \ libatlas-base-dev \ libatlas-dev \ libblas3gf \ libblas-dev \ libconfig8-dev \ libforms-bin \ libforms-dev \ libgcrypt11-dev \ libgmp-dev \ libgtk-3-dev \ libidn2-0-dev \ libidn11-dev \ libmysqlclient-dev \ liboctave-dev \ libpgm-5.1 \ libpgm-dev \ libsctp1 \ libsctp-dev \ libssl-dev \ libtasn1-3-dev \ libtool \ libusb-1.0-0-dev \ libxml2 \ libxml2-dev \ linux-headers-`uname -r` \ mscgen \ octave \ octave-signal \ openssh-client \ openssh-server \ openssl \ python \ subversion \ xmlstarlet \ python-pip \ pydb \ wvdial \ python-numpy \ sshpass $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so if [ `lsb_release -rs` = '12.04' ] ; then install_nettle_from_source install_gnutls_from_source else $SUDO apt-get install -y libgnutls-dev nettle-dev nettle-bin fi $SUDO pip install paramiko $SUDO pip install pyroute2 install_asn1c_from_source $SUDO rm -fr /opt/ssh $SUDO git clone https://gist.github.com/2190472.git /opt/ssh } install_asn1c_from_source(){ asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir " ( rm -rf /tmp/asn1c-r1516 mkdir -p /tmp/asn1c-r1516 cd /tmp/asn1c-r1516 rm -rf /tmp/asn1c-r1516/* svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c ./configure make -j`nproc` $SUDO make install ) > $asn1_install_dir 2>&1 } ################################################# # 2. compile ################################################ install_nas_tools() { cd $1 if [ ! -f .ue.nvram ]; then echo_success "generate .ue_emm.nvram .ue.nvram" ./nvram --gen else [ ./nvram -nt .ue.nvram -o ./nvram -nt .ue_emm.nvram ] && ./nvram --gen fi if [ ! -f .usim.nvram ]; then echo_success "generate .usim.nvram" ./usim --gen else [ ./usim -nt .usim.nvram ] && ./usim --gen fi } ################################ # set_openair_env ############################### set_openair_env(){ fullpath=`readlink -f $BASH_SOURCE` [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath` openair_path=${fullpath%/cmake_targets/*} openair_path=${openair_path%/targets/*} openair_path=${openair_path%/openair[123]/*} export OPENAIR_DIR=$openair_path export OPENAIR1_DIR=$openair_path/openair1 export OPENAIR2_DIR=$openair_path/openair2 export OPENAIR3_DIR=$openair_path/openair3 export OPENAIR_TARGETS=$openair_path/targets } ################################ # Function to killall the subprocesses when Ctrl-C Key is hit ############################### function handle_ctrl_c(){ CURPID=$$ ppid=$$ arraycounter=1 echo_info "** Trapped CTRL-C. Killing all subprocesses now..." while true do FORLOOP=FALSE # Get all the child process id for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'` do if [ $i -ne $CURPID ] ; then procid[$arraycounter]=$i arraycounter=`expr $arraycounter + 1` ppid=$i FORLOOP=TRUE fi done if [ "$FORLOOP" = "FALSE" ] ; then arraycounter=`expr $arraycounter - 1` ## We want to kill child process id first and then parent id's while [ $arraycounter -ne 0 ] do echo "first we send ctrl-c to program" $SUDO kill -INT "${procid[$arraycounter]}" sleep 5 echo "Now we force kill if that didn't work" $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null arraycounter=`expr $arraycounter - 1` done exit fi done } # get from http://www.linuxjournal.com/content/validating-ip-address-bash-script validate_ip() { local ip=$1 local stat=1 if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then OIFS=$IFS IFS='.' ip=($ip) IFS=$OIFS [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] stat=$? fi return $stat }