#/* # * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more # * contributor license agreements. See the NOTICE file distributed with # * this work for additional information regarding copyright ownership. # * The OpenAirInterface Software Alliance licenses this file to You under # * the OAI Public License, Version 1.1 (the "License"); you may not use this file # * except in compliance with the License. # * You may obtain a copy of the License at # * # * http://www.openairinterface.org/?page_id=698 # * # * Unless required by applicable law or agreed to in writing, software # * distributed under the License is distributed on an "AS IS" BASIS, # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # * See the License for the specific language governing permissions and # * limitations under the License. # *------------------------------------------------------------------------------- # * For more information about the OpenAirInterface (OAI) Software Alliance: # * contact@openairinterface.org # */ #--------------------------------------------------------------------- # # Dockerfile for the Open-Air-Interface BUILD service # Valid for RHEL9 # #--------------------------------------------------------------------- FROM ran-base:latest AS gnb-base FROM ran-build:latest AS gnb-build #start from scratch for target executable FROM registry.access.redhat.com/ubi9/ubi:latest as oai-gnb ENV TZ=Europe/Paris RUN dnf update -y && \ dnf install -y \ procps-ng \ libXpm \ libX11 \ atlas \ lksctp-tools \ tzdata \ gdb \ python3 \ python3-pip \ net-tools \ iputils && \ pip3 install six && \ pip3 install requests && \ echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \ echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf WORKDIR /opt/oai-gnb/bin COPY --from=gnb-build \ /oai-ran/cmake_targets/ran_build/build/nr-softmodem ./ COPY ./docker/scripts/gnb_entrypoint.sh ./entrypoint.sh COPY --from=gnb-build \ /oai-ran/cmake_targets/ran_build/build/liboai_eth_transpro.so \ /oai-ran/cmake_targets/ran_build/build/librfsimulator.so \ /oai-ran/cmake_targets/ran_build/build/liboai_usrpdevif.so \ /oai-ran/cmake_targets/ran_build/build/libcoding.so \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ /oai-ran/cmake_targets/ran_build/build/libldpc.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_ci.so \ /usr/local/lib/ COPY --from=gnb-base \ /lib64/libconfig.so.11 \ /lib64/libforms.so.2 \ /lib64/libblas.so.3 \ /lib64/liblapack.so.3 \ /lib64/liblapacke.so.3 \ /lib64/libboost_chrono.so.1.75.0 \ /lib64/libboost_date_time.so.1.75.0 \ /lib64/libboost_filesystem.so.1.75.0 \ /lib64/libboost_program_options.so.1.75.0 \ /lib64/libboost_serialization.so.1.75.0 \ /lib64/libboost_thread.so.1.75.0 \ /lib64/libboost_system.so.1.75.0 \ /lib64/libboost_unit_test_framework.so.1.75.0 \ /lib64/libboost_atomic.so.1.75.0 \ /lib64/libboost_timer.so.1.75.0 \ /lib64/libboost_regex.so.1.75.0 \ /lib64/libicudata.so.67 \ /lib64/libicui18n.so.67 \ /lib64/libicuuc.so.67 \ /lib64/ # Now we are copying from builder-image the UHD files. COPY --from=gnb-base /usr/local/bin/uhd_find_devices /usr/local/bin COPY --from=gnb-base /usr/local/lib64/libuhd.so.4.4.0 /usr/local/lib64 COPY --from=gnb-base /usr/local/lib64/uhd/utils/uhd_images_downloader.py /opt/oai-gnb/bin WORKDIR /usr/local/share/uhd/rfnoc COPY --from=gnb-base /usr/local/share/uhd/rfnoc/ . RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so /usr/local/lib/liboai_device.so" && \ ldconfig WORKDIR /opt/oai-gnb #EXPOSE 2152/udp # S1U, GTP/UDP #EXPOSE 22100/tcp # ? #EXPOSE 36412/udp # S1C, SCTP/UDP #EXPOSE 36422/udp # X2C, SCTP/UDP #EXPOSE 50000/udp # IF5 / ORI (control) #EXPOSE 50001/udp # IF5 / ECPRI (data) ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"] CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]