Commit b739e535 authored by francescomani's avatar francescomani

hardcoding invalid report for PUCCH2 CQI at gNB because SNR computation is wrong

parent c16bde29
......@@ -1607,14 +1607,15 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
// estimate CQI for MAC (from antenna port 0 only)
// TODO this computation is wrong -> to be ignored at MAC for now
int SNRtimes10 =
int cqi = 0xff;
/*int SNRtimes10 =
dB_fixed_times10(signal_energy_nodc((int32_t *)&rxdataF[0][soffset + (l2 * frame_parms->ofdm_symbol_size) + re_offset[0]],
12 * pucch_pdu->prb_size))
- (10 * gNB->measurements.n0_power_tot_dB);
int cqi,bit_left;
if (SNRtimes10 < -640) cqi=0;
else if (SNRtimes10 > 635) cqi=255;
else cqi=(640+SNRtimes10)/5;
else cqi=(640+SNRtimes10)/5;*/
uci_pdu->harq.harq_bit_len = pucch_pdu->bit_len_harq;
uci_pdu->pduBitmap=0;
......@@ -1638,8 +1639,8 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
LOG_D(PHY, "[DLSCH/PDSCH/PUCCH2] %d.%d HARQ payload (%d) = %d\n", frame, slot, i, uci_pdu->harq.harq_payload[i]);
decodedPayload[0]>>=8;
}
bit_left = pucch_pdu->bit_len_harq-((harq_bytes-1)<<3);
uci_pdu->harq.harq_payload[i] = decodedPayload[0] & ((1<<bit_left)-1);
int bit_left = pucch_pdu->bit_len_harq - ((harq_bytes - 1) << 3);
uci_pdu->harq.harq_payload[i] = decodedPayload[0] & ((1 << bit_left) - 1);
LOG_D(PHY, "[DLSCH/PDSCH/PUCCH2] %d.%d HARQ payload (%d) = %d\n", frame, slot, i, uci_pdu->harq.harq_payload[i]);
decodedPayload[0] >>= pucch_pdu->bit_len_harq;
}
......@@ -1664,8 +1665,8 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & 255;
decodedPayload[0]>>=8;
}
bit_left = pucch_pdu->bit_len_csi_part1-((csi_part1_bytes-1)<<3);
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & ((1<<bit_left)-1);
int bit_left = pucch_pdu->bit_len_csi_part1-((csi_part1_bytes-1)<<3);
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & ((1 << bit_left) - 1);
decodedPayload[0] = pucch_pdu->bit_len_csi_part1 < 64 ? decodedPayload[0] >> bit_left : 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment