Skip to content

O
OpenXG-RAN
Commit d47f1276 authored by Mario Joa-Ng's avatar Mario Joa-Ng
Browse files
Options

fix the problem in nr_dlschsim where init_dlsch_tpool() is missing.

parent 483b552a
Show whitespace changes
Inline Side-by-side
Showing with 6 additions and 3 deletions
openair1/SIMULATION/NR_PHY/dlschsim.c
View file @ d47f1276
...@@ -109,6 +109,7 @@ int main(int argc, char **argv) ...@@ -109,6 +109,7 @@ int main(int argc, char **argv)
int ret; int ret;
//int run_initial_sync=0; //int run_initial_sync=0;
int loglvl = OAILOG_WARNING; int loglvl = OAILOG_WARNING;
uint8_t dlsch_threads = 0;
float target_error_rate = 0.01; float target_error_rate = 0.01;
uint64_t SSB_positions=0x01; uint64_t SSB_positions=0x01;
uint16_t nb_symb_sch = 12; uint16_t nb_symb_sch = 12;
...@@ -138,9 +139,9 @@ int main(int argc, char **argv) ...@@ -138,9 +139,9 @@ int main(int argc, char **argv)
break;*/ break;*/
/*case 'd': case 'd':
frame_type = 1; dlsch_threads = atoi(optarg);
break;*/ break;
case 'g': case 'g':
switch ((char) *optarg) { switch ((char) *optarg) {
...@@ -320,6 +321,7 @@ int main(int argc, char **argv) ...@@ -320,6 +321,7 @@ int main(int argc, char **argv)
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n"); //printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
//printf("-f Output filename (.txt format) for Pe/SNR results\n"); //printf("-f Output filename (.txt format) for Pe/SNR results\n");
printf("-F Input filename (.txt format) for RX conformance testing\n"); printf("-F Input filename (.txt format) for RX conformance testing\n");
printf("-d number of dlsch threads, 0: no dlsch parallelization\n");
exit(-1); exit(-1);
break; break;
} }
...@@ -331,6 +333,7 @@ int main(int argc, char **argv) ...@@ -331,6 +333,7 @@ int main(int argc, char **argv)
if (snr1set == 0) if (snr1set == 0)
snr1 = snr0 + 10; snr1 = snr0 + 10;
init_dlsch_tpool(dlsch_threads);
if (ouput_vcd) if (ouput_vcd)
vcd_signal_dumper_init("/tmp/openair_dump_nr_dlschsim.vcd"); vcd_signal_dumper_init("/tmp/openair_dump_nr_dlschsim.vcd");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment