#/* # * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more # * contributor license agreements. See the NOTICE file distributed with # * this work for additional information regarding copyright ownership. # * The OpenAirInterface Software Alliance licenses this file to You under # * the OAI Public License, Version 1.1 (the "License"); you may not use this file # * except in compliance with the License. # * You may obtain a copy of the License at # * # * http://www.openairinterface.org/?page_id=698 # * # * Unless required by applicable law or agreed to in writing, software # * distributed under the License is distributed on an "AS IS" BASIS, # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # * See the License for the specific language governing permissions and # * limitations under the License. # *------------------------------------------------------------------------------- # * For more information about the OpenAirInterface (OAI) Software Alliance: # * contact@openairinterface.org # */ #--------------------------------------------------------------------- # # Dockerfile for the Open-Air-Interface BUILD service # Valid for Ubuntu 20.04 # #--------------------------------------------------------------------- FROM ran-base:latest AS nr-ue-base FROM ran-build:latest AS nr-ue-build #start from scratch for target executable FROM ubuntu:focal as oai-nr-ue ARG BUILD_OPTION ENV DEBIAN_FRONTEND=noninteractive ENV TZ=Europe/Paris RUN apt-get update && \ DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \ DEBIAN_FRONTEND=noninteractive apt-get install --yes \ software-properties-common \ procps \ libsctp1 \ libboost-chrono1.71.0 \ libboost-date-time1.71.0 \ libboost-filesystem1.71.0 \ libboost-regex1.71.0 \ libboost-serialization1.71.0 \ libboost-thread1.71.0 \ libboost-system1.71.0 \ libboost-program-options1.71.0 \ tzdata \ liblapacke \ libatlas3-base \ libconfig9 \ openssl \ net-tools \ gdb \ python \ python3 \ python3-six \ python3-requests \ libusb-1.0-0 \ iputils-ping \ iproute2 \ iperf3 \ iperf && \ # if the --sanitize option was used to build, additional packages are required /bin/bash -c 'if [[ "$BUILD_OPTION" = "--sanitize" ]]; then DEBIAN_FRONTEND=noninteractive apt-get install --yes \ libasan5 \ libubsan1; fi' && \ apt-get clean -y && \ rm -rf /var/lib/apt/lists/* WORKDIR /opt/oai-nr-ue/bin COPY --from=nr-ue-build \ /oai-ran/cmake_targets/ran_build/build/nr-uesoftmodem \ ./ COPY ./docker/scripts/nr_ue_entrypoint.sh ./entrypoint.sh WORKDIR /opt/oai-nr-ue/etc COPY --from=nr-ue-build \ /oai-ran/cmake_targets/ran_build/build/liboai_eth_transpro.so \ /oai-ran/cmake_targets/ran_build/build/librfsimulator.so \ /oai-ran/cmake_targets/ran_build/build/liboai_usrpdevif.so \ /oai-ran/cmake_targets/ran_build/build/libcoding.so \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ /oai-ran/cmake_targets/ran_build/build/libldpc*.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_ciUE.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_5Gue.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. COPY --from=nr-ue-base /usr/local/bin/uhd_find_devices /usr/local/bin COPY --from=nr-ue-base /usr/local/lib/libuhd.so.4.4.0 /usr/local/lib COPY --from=nr-ue-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-nr-ue/bin RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so /usr/local/lib/liboai_device.so" && \ ldconfig && \ ldd /opt/oai-nr-ue/bin/nr-uesoftmodem WORKDIR /opt/oai-nr-ue COPY --from=nr-ue-base /tini /tini CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/nr-ue.conf"] ENTRYPOINT ["/tini", "-v", "--", "/opt/oai-nr-ue/bin/entrypoint.sh"]