[Docker] adding IF4.5 template conf files for eNB target image

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -260,8 +260,8 @@ NETWORK_CONTROLLER :
     FLEXRAN_AWAIT_RECONF   = "no";
 };
 
-     log_config :
-     {
+log_config :
+{
   global_log_level         ="info";
   global_log_verbosity     ="medium";
   hw_log_level             ="info";
@@ -276,4 +276,4 @@ NETWORK_CONTROLLER :
   pdcp_log_verbosity       ="medium";
   rrc_log_level            ="info";
   rrc_log_verbosity        ="medium";
-    };
+};

docker/scripts/enb_entrypoint.sh

@@ -11,6 +11,8 @@ if [[ -v USE_FDD_DU ]]; then ln -s $PREFIX/etc/du.fdd.conf $PREFIX/etc/enb.conf;
 if [[ -v USE_FDD_MONO ]]; then ln -s $PREFIX/etc/enb.fdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_TDD_MONO ]]; then ln -s $PREFIX/etc/enb.tdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_FDD_FAPI_RCC ]]; then ln -s $PREFIX/etc/rcc.nfapi.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_TDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.tdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/enb.conf; fi
 

docker/scripts/enb_parameters.yaml

@@ -25,7 +25,7 @@
     dest_dir: docker/etc
     
 - configurations:
-  - filePrefix: cu
+  - filePrefix: cu.band7.tm1.25PRB
     outputfilename: "cu.fdd.conf"
     config:
     - key: Active_eNBs
@@ -68,7 +68,7 @@
     - key: ENB_IPV4_ADDRESS_FOR_X2C
       env: "@F1_CU_IP_ADDRESS@"
       
-  - filePrefix: du
+  - filePrefix: du.band7.tm1.25PRB
     outputfilename: "du.fdd.conf"
     config:
     - key: Active_eNBs
@@ -248,3 +248,89 @@
     - key: ENB_IPV4_ADDRESS_FOR_X2C
       env: "@F1_CU_IP_ADDRESS@"
 
+  - filePrefix: "rcc.band7.tm1.if4p5.lo.25PRB"
+    outputfilename: "rcc.if4p5.fdd.conf"
+    config:
+    - key: Active_eNBs
+      env: "@ENB_NAME@"
+    - key: eNB_name
+      env: "@ENB_NAME@"
+    - key: plmn_list
+      env:
+        mcc: "@MCC@"
+        mnc: "@MNC@"
+        mnc_length: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: eutra_band
+      env: "@UTRA_BAND_ID@"
+    - key: downlink_frequency
+      env: "@DL_FREQUENCY_IN_MHZ@000000"
+    - key: uplink_frequency_offset
+      env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
+    - key: Nid_cell
+      env: "@NID_CELL@"
+    - key: N_RB_DL
+      env: "@NB_PRB@"
+    - key: ipv4
+      env: "@MME_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1_MME
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1_MME
+      env: "@RCC_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1U
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1U
+      env: "@RCC_IP_ADDRESS@"
+    - key: ENB_IPV4_ADDRESS_FOR_X2C
+      env: "@RCC_IP_ADDRESS@"
+    - key: local_if_name
+      env: "@IF4P5_IF_NAME@"
+    - key: remote_address
+      env: "@IF4P5_RRU_IP_ADDRESS@"
+    - key: local_address
+      env: "@IF4P5_RCC_IP_ADDRESS@"
+
+  - filePrefix: "rcc.band40.tm1.25PRB"
+    outputfilename: "rcc.if4p5.tdd.conf"
+    config:
+    - key: Active_eNBs
+      env: "@ENB_NAME@"
+    - key: eNB_name
+      env: "@ENB_NAME@"
+    - key: plmn_list
+      env:
+        mcc: "@MCC@"
+        mnc: "@MNC@"
+        mnc_length: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: eutra_band
+      env: "@UTRA_BAND_ID@"
+    - key: downlink_frequency
+      env: "@DL_FREQUENCY_IN_MHZ@000000"
+    - key: uplink_frequency_offset
+      env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
+    - key: Nid_cell
+      env: "@NID_CELL@"
+    - key: N_RB_DL
+      env: "@NB_PRB@"
+    - key: ipv4
+      env: "@MME_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1_MME
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1_MME
+      env: "@RCC_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1U
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1U
+      env: "@RCC_IP_ADDRESS@"
+    - key: ENB_IPV4_ADDRESS_FOR_X2C
+      env: "@RCC_IP_ADDRESS@"
+    - key: local_if_name
+      env: "@IF4P5_IF_NAME@"
+    - key: remote_address
+      env: "@IF4P5_RRU_IP_ADDRESS@"
+    - key: local_address
+      env: "@IF4P5_RCC_IP_ADDRESS@"
+

docker/scripts/generateTemplate.py

@@ -39,20 +39,24 @@ def main():
   for config in data[1]["configurations"]:
     filePrefix = config["filePrefix"]
     outputfilename = config["outputfilename"]
+    print('================================================')
     print('filePrefix = ' + filePrefix)
     print('outputfilename = ' + outputfilename)
     for inputfile in dir:
       if inputfile.find(filePrefix) >=0:
-        prefix_outputfile = {"cu": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}', 
-                             "du": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+        prefix_outputfile = {"cu.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}', 
+                             "du.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.fdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.tdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band7.tm1.25PRB.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band40.tm1.25PRB.FairScheduler.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "rcc.band7.tm1.if4p5.lo.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "rcc.band40.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue_sim_ci": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
                              }
+        print('inputfile = ' + inputfile)
         if filePrefix in prefix_outputfile:
           outputfile1 = prefix_outputfile[filePrefix]