#ifndef NR_SOFTMODEM_COMMON_H #define NR_SOFTMODEM_COMMON_H #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <execinfo.h> #include <fcntl.h> #include <getopt.h> #include <linux/sched.h> #include <sched.h> #include <signal.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <syscall.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/sysinfo.h> #include <sys/types.h> #include <unistd.h> #include <sys/sysinfo.h> #include "targets/ARCH/COMMON/common_lib.h" #undef MALLOC #include "assertions.h" #include "PHY/types.h" #include <threadPool/thread-pool.h> #if defined(ENABLE_USE_MME) #include "s1ap_eNB.h" #ifdef PDCP_USE_NETLINK #include "SIMULATION/ETH_TRANSPORT/proto.h" #endif #endif /* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */ #define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n" #define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n" #define CONFIG_HLP_CALUER "set UE RX calibration\n" #define CONFIG_HLP_CALUERM "" #define CONFIG_HLP_CALUERB "" #define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n" #define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n" #define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n" #define CONFIG_HLP_UERXG "set UE RX gain\n" #define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n" #define CONFIG_HLP_UETXG "set UE TX gain\n" #define CONFIG_HLP_UENANTR "set UE number of rx antennas\n" #define CONFIG_HLP_UENANTT "set UE number of tx antennas\n" #define CONFIG_HLP_UESCAN "set UE to scan around carrier\n" #define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n" #define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n" #define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n" #define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n" #define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n" #define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n" #define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n" #define CONFIG_HLP_EXCCLK "tells hardware to use a clock reference (0:internal(default), 1:external, 2:gpsdo)\n" #define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n" #define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n" #define CONFIG_HLP_TADV "Set timing_advance\n" #define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n" #define CONFIG_HLP_CHOFF "Channel id offset\n" #define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n" #define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n" #define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n" #define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n" #define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n" #define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n" #define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n" #define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n" #define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n" #define CONFIG_HLP_UE "Set the lte softmodem as a UE\n" #define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n" #define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n" #define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n" #define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n" #define CONFIG_HLP_TPORT "tracer port\n" #define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n" #define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n" #define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n" #define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n" #define CONFIG_HLP_RRC_CFG_PATH "path for RRC configuration\n" #define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n" #define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n" #define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n" #define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n" #define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n" #define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n" #define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n" #define CONFIG_HLP_FLOG "Enable online log \n" #define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n" #define CONFIG_HLP_LOGV "Set the global log verbosity \n" #define CONFIG_HLP_TELN "Start embedded telnet server \n" #define CONFIG_HLP_MSC "Enable the MSC tracing utility \n" #define CONFIG_HLP_SNR "Set average SNR in dB (for --siml1 option)\n" #define CONFIG_HLP_NOS1 "Disable s1 interface\n" #define CONFIG_HLP_NOKRNMOD "(noS1 only): Use tun instead of namesh module \n" /*--------------------------------------------------------------------------------------------------------------------------------*/ /* command line parameters for LOG utility */ /* optname helpstr paramflags XXXptr defXXXval type numelt */ /*--------------------------------------------------------------------------------------------------------------------------------*/ #define START_MSC softmodem_params.start_msc #define CMDLINE_LOGPARAMS_DESC_NR { \ {"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \ {"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \ {"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \ {"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \ {"msc", CONFIG_HLP_MSC, PARAMFLAG_BOOL, uptr:&START_MSC, defintval:0, TYPE_UINT, 0}, \ } #define CMDLINE_ONLINELOG_IDX 0 #define CMDLINE_GLOGLEVEL_IDX 1 #define CMDLINE_GLOGVERBO_IDX 2 #define CMDLINE_STARTTELN_IDX 3 /***************************************************************************************************************************************/ extern pthread_cond_t sync_cond; extern pthread_mutex_t sync_mutex; extern int sync_var; extern uint64_t downlink_frequency[MAX_NUM_CCs][4]; extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4]; extern int rx_input_level_dBm; extern uint64_t num_missed_slots; // counter for the number of missed slots extern int oaisim_flag; extern volatile int oai_exit; extern openair0_config_t openair0_cfg[MAX_CARDS]; extern pthread_cond_t sync_cond; extern pthread_mutex_t sync_mutex; extern int sync_var; extern int transmission_mode; extern double cpuf; extern int emulate_rf; extern int numerology; extern int usrp_tx_thread; extern volatile int start_eNB; extern volatile int start_UE; #endif