#/* # * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more # * contributor license agreements. See the NOTICE file distributed with # * this work for additional information regarding copyright ownership. # * The OpenAirInterface Software Alliance licenses this file to You under # * the OAI Public License, Version 1.1 (the "License"); you may not use this file # * except in compliance with the License. # * You may obtain a copy of the License at # * # * http://www.openairinterface.org/?page_id=698 # * # * Unless required by applicable law or agreed to in writing, software # * distributed under the License is distributed on an "AS IS" BASIS, # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # * See the License for the specific language governing permissions and # * limitations under the License. # *------------------------------------------------------------------------------- # * For more information about the OpenAirInterface (OAI) Software Alliance: # * contact@openairinterface.org # */ #--------------------------------------------------------------------- # # Dockerfile for the Open-Air-Interface BUILD service # Valid for Ubuntu20.04 # #--------------------------------------------------------------------- FROM ran-base:latest AS lte-ue-base FROM ran-build:latest AS lte-ue-build #start from scratch for target executable FROM ubuntu:focal as oai-lte-ue ARG BUILD_OPTION ENV DEBIAN_FRONTEND=noninteractive ENV TZ=Europe/Paris RUN apt-get update && \ DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \ DEBIAN_FRONTEND=noninteractive apt-get install --yes \ software-properties-common \ tzdata \ procps \ libsctp1 \ liblapacke \ libatlas3-base \ libconfig9 \ openssl \ net-tools \ python \ python3 \ python3-six \ python3-requests \ libpython3.8 \ libusb-1.0-0 \ iputils-ping \ iproute2 \ iperf && \ # if the --sanitize option was used to build, additional packages are required /bin/bash -c 'if [[ "$BUILD_OPTION" = "--sanitize" ]]; then DEBIAN_FRONTEND=noninteractive apt-get install --yes \ libasan5 \ libubsan1 \ liblapacke; fi' && \ rm -rf /var/lib/apt/lists/* WORKDIR /opt/oai-lte-ue/bin COPY --from=lte-ue-build \ /oai-ran/cmake_targets/ran_build/build/lte-uesoftmodem \ /oai-ran/cmake_targets/nas_sim_tools/build/conf2uedata \ /oai-ran/cmake_targets/nas_sim_tools/build/nvram \ /oai-ran/cmake_targets/nas_sim_tools/build/usim \ ./ COPY ./docker/scripts/lte_ue_entrypoint.sh ./entrypoint.sh COPY --from=lte-ue-build \ /oai-ran/cmake_targets/ran_build/build/liboai_eth_transpro.so \ /oai-ran/cmake_targets/ran_build/build/librfsimulator.so \ /oai-ran/cmake_targets/ran_build/build/liboai_usrpdevif.so \ /oai-ran/cmake_targets/ran_build/build/libcoding.so \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. COPY --from=lte-ue-base /usr/local/bin/uhd_find_devices /usr/local/bin COPY --from=lte-ue-base /usr/local/lib/libuhd.so.4.4.0 /usr/local/lib COPY --from=lte-ue-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-lte-ue/bin COPY --from=lte-ue-base \ /usr/lib/x86_64-linux-gnu/libboost_chrono.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_serialization.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_thread.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_system.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/libboost_program_options.so.1.71.0 \ /usr/lib/x86_64-linux-gnu/ RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so /usr/local/lib/liboai_device.so" && \ ldconfig && \ ldd /opt/oai-lte-ue/bin/lte-uesoftmodem WORKDIR /opt/oai-lte-ue COPY --from=lte-ue-base /tini /tini CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem"] ENTRYPOINT ["/tini", "-v", "--", "/opt/oai-lte-ue/bin/entrypoint.sh"]