Skip to content

O
OpenXG-RAN
Commit 1b06523c authored by Francesco Mani's avatar Francesco Mani
Browse files
Options

Merge branch 'NR_UL_scheduling' of... 

Merge branch 'NR_UL_scheduling' of https://gitlab.eurecom.fr/oai/openairinterface5g into NR_UL_scheduling
parents 01305185 b58ea809
Show whitespace changes
Inline Side-by-side
Showing with 338 additions and 144 deletions
cmake_targets/CMakeLists.txt
View file @ 1b06523c
......@@ -2938,6 +2938,7 @@ add_executable(nr_dlschsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/common/utils/utils.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
......@@ -2951,6 +2952,7 @@ add_executable(nr_pbchsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/common/utils/utils.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
......@@ -2966,6 +2968,7 @@ add_executable(nr_pucchsim
${OPENAIR_DIR}/common/utils/backtrace.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/utils.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
......@@ -2977,6 +2980,7 @@ target_link_libraries(nr_pucchsim
add_executable(nr_dlsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlsim.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/executables/softmodem-common.c
......@@ -2992,6 +2996,7 @@ target_compile_definitions(nr_dlsim PUBLIC -DPHYSICAL_SIMULATOR)
add_executable(nr_prachsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_common.c
......@@ -3003,6 +3008,7 @@ target_link_libraries(nr_prachsim
add_executable(nr_ulschsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${UTIL_SRC}
......
executables/nr-uesoftmodem.c
View file @ 1b06523c
......@@ -358,6 +358,8 @@ static void get_options(void) {
frame_parms[CC_id]->dl_CarrierFreq = downlink_frequency[0][0];
}
init_symbol_rotation(frame_parms,frame_parms[CC_id]->dl_CarrierFreq);
UE_scan=0;
if (tddflag > 0) {
......
openair1/PHY/INIT/nr_init.c
View file @ 1b06523c
......@@ -495,6 +495,9 @@ void nr_phy_config_request(NR_PHY_Config_t *phy_config) {
compute_nr_prach_seq(short_sequence, num_sequences, rootSequenceIndex, RC.gNB[Mod_id]->X_u);
RC.gNB[Mod_id]->configured = 1;
init_symbol_rotation(fp,fp->dl_CarrierFreq);
LOG_I(PHY,"gNB %d configured\n",Mod_id);
}
......
openair1/PHY/MODULATION/nr_modulation.c
View file @ 1b06523c
......@@ -398,3 +398,34 @@ void nr_dft(int32_t *z, int32_t *d, uint32_t Msc_PUSCH)
z[i] = dft_out0[ip];
}
}
void init_symbol_rotation(NR_DL_FRAME_PARMS *fp,uint64_t CarrierFreq) {
const int nsymb = fp->symbols_per_slot * fp->slots_per_frame/10;
const double Tc=(1/480e3/4096);
const double Nu=2048*64*.5;
const double f0= (double)CarrierFreq;
const double Ncp0=16*64 + (144*64*.5);
const double Ncp1=(144*64*.5);
double tl=0,poff,exp_re,exp_im;
double Ncp,Ncpm1=Ncp0;
fp->symbol_rotation[0] = 32767;
fp->symbol_rotation[1] = 0;
LOG_I(PHY,"Doing symbol rotation calculation for gNB TX/RX, f0 %f Hz, Nsymb %d\n",f0,nsymb);
LOG_I(PHY,"Symbol rotation %d/%d => (%d,%d)\n",0,nsymb,fp->symbol_rotation[0],fp->symbol_rotation[1]);
for (int l=1;l<nsymb;l++) {
if (l==(7*(1<<fp->numerology_index))) Ncp=Ncp0;
else Ncp=Ncp1;
tl += (Nu+Ncpm1)*Tc;
poff = 2*M_PI*(tl + (Ncp*Tc))*f0;
exp_re = cos(poff);
exp_im = sin(-poff);
fp->symbol_rotation[l<<1]=(int16_t)floor(exp_re*32767);
fp->symbol_rotation[1+(l<<1)]=(int16_t)floor(exp_im*32767);
LOG_I(PHY,"Symbol rotation %d/%d => tl %f (%d,%d) (%f)\n",l,nsymb,tl,fp->symbol_rotation[l<<1],fp->symbol_rotation[1+(l<<1)],
(poff/2/M_PI)-floor(poff/2/M_PI));
Ncpm1=Ncp;
}
}
openair1/PHY/MODULATION/nr_modulation.h
View file @ 1b06523c
......@@ -103,4 +103,13 @@ int nr_beam_precoding(int32_t **txdataF,
int nb_antenna_ports
);
void apply_nr_rotation(NR_DL_FRAME_PARMS *fp,
int16_t* txdata,
int slot,
int first_symbol,
int nsymb,
int length);
void init_symbol_rotation(NR_DL_FRAME_PARMS *fp,uint64_t CarrierFreq);
#endif
openair1/PHY/MODULATION/ofdm_mod.c
View file @ 1b06523c
......@@ -294,60 +294,23 @@ void do_OFDM_mod(int32_t **txdataF, int32_t **txdata, uint32_t frame,uint16_t ne
}
/*
// OFDM modulation for each symbol
void do_OFDM_mod_symbol(LTE_eNB_COMMON *eNB_common_vars, RU_COMMON *common, uint16_t next_slot, LTE_DL_FRAME_PARMS *frame_parms,int do_precoding)
{
int aa, l, slot_offset, slot_offsetF;
int32_t **txdataF = eNB_common_vars->txdataF;
int32_t **txdataF_BF = common->txdataF_BF;
int32_t **txdata = common->txdata;
slot_offset = (next_slot)*(frame_parms->samples_per_tti>>1);
slot_offsetF = (next_slot)*(frame_parms->ofdm_symbol_size)*((frame_parms->Ncp==EXTENDED) ? 6 : 7);
//printf("Thread %d starting ... aa %d (%llu)\n",omp_get_thread_num(),aa,rdtsc());
for (l=0; l<frame_parms->symbols_per_tti>>1; l++) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
//printf("do_OFDM_mod_l, slot=%d, l=%d, NUMBER_OF_OFDM_CARRIERS=%d,OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES=%d\n",next_slot, l,NUMBER_OF_OFDM_CARRIERS,OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_BEAM_PRECODING,1);
if (do_precoding==1) beam_precoding(txdataF,txdataF_BF,frame_parms,eNB_common_vars->beam_weights,next_slot,l,aa);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_BEAM_PRECODING,0);
//PMCH case not implemented...
if (frame_parms->Ncp == EXTENDED)
PHY_ofdm_mod((do_precoding == 1)?txdataF_BF[aa]:&txdataF[aa][slot_offsetF+l*frame_parms->ofdm_symbol_size], // input
&txdata[aa][slot_offset+l*OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES], // output
frame_parms->ofdm_symbol_size,
1, // number of symbols
frame_parms->nb_prefix_samples, // number of prefix samples
CYCLIC_PREFIX);
else {
if (l==0) {
PHY_ofdm_mod((do_precoding==1)?txdataF_BF[aa]:&txdataF[aa][slot_offsetF+l*frame_parms->ofdm_symbol_size], // input
&txdata[aa][slot_offset], // output
frame_parms->ofdm_symbol_size,
1, // number of symbols
frame_parms->nb_prefix_samples0, // number of prefix samples
CYCLIC_PREFIX);
} else {
PHY_ofdm_mod((do_precoding==1)?txdataF_BF[aa]:&txdataF[aa][slot_offsetF+l*frame_parms->ofdm_symbol_size], // input
&txdata[aa][slot_offset+OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES0+(l-1)*OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES], // output
frame_parms->ofdm_symbol_size,
1, // number of symbols
frame_parms->nb_prefix_samples, // number of prefix samples
CYCLIC_PREFIX);
//printf("txdata[%d][%d]=%d\n",aa,slot_offset+OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES0+(l-1)*OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES,txdata[aa][slot_offset+OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES0+(l-1)*OFDM_SYMBOL_SIZE_COMPLEX_SAMPLES]);
}
}
void apply_nr_rotation(NR_DL_FRAME_PARMS *fp,
int16_t* trxdata,
int slot,
int first_symbol,
int nsymb,
int length) {
int symb_offset = (slot%fp->slots_per_subframe)*fp->symbols_per_slot;
for (int sidx=0;sidx<nsymb;sidx++) {
LOG_D(PHY,"Rotating symbol %d, slot %d, symbol_subframe_index %d, length %d (%d,%d)\n",
first_symbol+sidx,slot,sidx+first_symbol+symb_offset,length,
fp->symbol_rotation[2*(sidx+first_symbol+symb_offset)],fp->symbol_rotation[1+2*(sidx+first_symbol+symb_offset)]);
rotate_cpx_vector(trxdata+(sidx*length*2),
&fp->symbol_rotation[2*(sidx+first_symbol+symb_offset)],
trxdata+(sidx*length*2),
length,
15);
}
}
}
*/
openair1/PHY/MODULATION/slot_fep_nr.c
View file @ 1b06523c
......@@ -198,10 +198,20 @@ int nr_slot_fep(PHY_VARS_NR_UE *ue,
}
#ifdef DEBUG_FEP
#ifdef DEBUG_FEP
// if (ue->frame <100)
printf("slot_fep: frame %d: symbol %d rx_offset %u\n", ue->proc.proc_rxtx[(Ns)&1].frame_rx, symbol, rx_offset);
#endif
#endif
int symb_offset = (Ns%frame_parms->slots_per_subframe)*frame_parms->symbols_per_slot;
int32_t rot2 = ((uint32_t*)frame_parms->symbol_rotation)[symbol+symb_offset];
((int16_t*)&rot2)[1]=-((int16_t*)&rot2)[1];
rotate_cpx_vector((int16_t *)&common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[Ns]].rxdataF[aa][frame_parms->ofdm_symbol_size*symbol],
(int16_t*)&rot2,
(int16_t *)&common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[Ns]].rxdataF[aa][frame_parms->ofdm_symbol_size*symbol],
frame_parms->ofdm_symbol_size,
15);
}
......@@ -373,10 +383,19 @@ int nr_slot_fep_init_sync(PHY_VARS_NR_UE *ue,
}
#ifdef DEBUG_FEP
#ifdef DEBUG_FEP
// if (ue->frame <100)
printf("slot_fep: frame %d: symbol %d rx_offset %u\n", ue->proc.proc_rxtx[(Ns)&1].frame_rx, symbol, rx_offset);
#endif
#endif
int symb_offset = (Ns%frame_parms->slots_per_subframe)*frame_parms->symbols_per_slot;
int32_t rot2 = ((uint32_t*)frame_parms->symbol_rotation)[symbol+symb_offset];
((int16_t*)&rot2)[1]=-((int16_t*)&rot2)[1];
rotate_cpx_vector((int16_t *)&common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[Ns]].rxdataF[aa][frame_parms->ofdm_symbol_size*symbol],
(int16_t*)&rot2,
(int16_t *)&common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[Ns]].rxdataF[aa][frame_parms->ofdm_symbol_size*symbol],
frame_parms->ofdm_symbol_size,
15);
}
......@@ -450,11 +469,11 @@ int nr_slot_fep_ul(NR_DL_FRAME_PARMS *frame_parms,
rxdata_offset = slot_offset + nb_prefix_samples0 + (symbol * (frame_parms->ofdm_symbol_size + nb_prefix_samples)) - SOFFSET;
if(sample_offset>rxdata_offset) {
memcpy((void *)tmp_dft_in,
memcpy1((void *)tmp_dft_in,
(void *) &rxdata[frame_parms->samples_per_frame-sample_offset+rxdata_offset],
(sample_offset-rxdata_offset)*sizeof(int));
memcpy((void *)&tmp_dft_in[sample_offset-rxdata_offset],
memcpy1((void *)&tmp_dft_in[sample_offset-rxdata_offset],
(void *) &rxdata[0],
(frame_parms->ofdm_symbol_size-sample_offset+rxdata_offset)*sizeof(int));
......@@ -468,5 +487,14 @@ int nr_slot_fep_ul(NR_DL_FRAME_PARMS *frame_parms,
// clear DC carrier from OFDM symbols
rxdataF[symbol * frame_parms->ofdm_symbol_size] = 0;
int symb_offset = (Ns%frame_parms->slots_per_subframe)*frame_parms->symbols_per_slot;
int32_t rot2 = ((uint32_t*)frame_parms->symbol_rotation)[symbol+symb_offset];
((int16_t*)&rot2)[1]=-((int16_t*)&rot2)[1];
LOG_D(PHY,"slot %d, symb_offset %d rotating by %d.%d\n",slot,symbol_offset,((int16_t*)&rot2)[0],((int16_t*)&rot2)[1]);
rotate_cpx_vector((int16_t *)&rxdataF[frame_parms->ofdm_symbol_size*symbol],
(int16_t*)&rot2,
(int16_t *)&rxdataF[frame_parms->ofdm_symbol_size*symbol],
frame_parms->ofdm_symbol_size,
15);
return(0);
}
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
View file @ 1b06523c
......@@ -30,6 +30,8 @@
//#define DEBUG_CH
//#define DEBUG_PUSCH
#define dBc(x,y) (dB_fixed(((int32_t)(x))*(x) + ((int32_t)(y))*(y)))
int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
unsigned char Ns,
unsigned short p,
......@@ -123,7 +125,10 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
nr_pusch_dmrs_rx(gNB, Ns, gNB->nr_gold_pusch_dmrs[pusch_pdu->scid][Ns][symbol], &pilot[0], 1000, 0, nb_rb_pusch, 0, pusch_pdu->dmrs_config_type);
//------------------------------------------------//
#ifdef DEBUG_PUSCH
for (int i=0;i<(6*nb_rb_pusch);i++)
printf("%d+j*(%d)\n",((int16_t*)pilot)[2*i],((int16_t*)pilot)[1+(2*i)]);
#endif
for (aarx=0; aarx<gNB->frame_parms.nb_antennas_rx; aarx++) {
pil = (int16_t *)&pilot[0];
......@@ -135,7 +140,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
#ifdef DEBUG_PUSCH
printf("symbol_offset %d, nushift %d\n",symbol_offset,nushift);
printf("ch est pilot addr %p RB_DL %d\n",&pilot[0], gNB->frame_parms.N_RB_UL);
printf("bwp_start_subcarrier %d, k %d, first_carrier %d\n",bwp_start_subcarrier,k,gNB->frame_parms.first_carrier_offset);
printf("bwp_start_subcarrier %d, k %d, first_carrier %d, nb_rb_pusch %d\n",bwp_start_subcarrier,k,gNB->frame_parms.first_carrier_offset,nb_rb_pusch);
printf("rxF addr %p p %d\n", rxF,p);
printf("ul_ch addr %p nushift %d\n",ul_ch,nushift);
#endif
......@@ -149,8 +154,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
#ifdef DEBUG_PUSCH
printf("ch 0 %d\n",((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1]));
printf("pilot 0 : rxF - > (%d,%d) addr %p ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],&rxF[0],ch[0],ch[1],pil[0],pil[1]);
printf("data 0 : rxF - > (%d,%d)\n",rxF[2],rxF[3]);
printf("pilot 0 : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data 0 : rxF - > (%d,%d) (%d)\n",rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fl,
......@@ -167,8 +172,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot 1 : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data 1 : rxF - > (%d,%d)\n",rxF[2],rxF[3]);
printf("pilot 1 : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data 1 : rxF - > (%d,%d) (%d)\n",rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fml,
ch,
......@@ -183,8 +188,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot 2 : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data 2 : rxF - > (%d,%d)\n",rxF[2],rxF[3]);
printf("pilot 2 : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data 2 : rxF - > (%d,%d) (%d)\n",rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fmm,
ch,
......@@ -205,8 +210,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot %u : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d)\n",pilot_cnt,rxF[2],rxF[3]);
printf("pilot %u : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",pilot_cnt,rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d) (%d)\n",pilot_cnt,rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fml,
ch,
......@@ -221,8 +226,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot %u : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt+1,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d)\n",pilot_cnt+1,rxF[2],rxF[3]);
printf("pilot %u : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",pilot_cnt+1,rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d) (%d)\n",pilot_cnt+1,rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fmm,
ch,
......@@ -243,8 +248,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot %u : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d)\n",pilot_cnt,rxF[2],rxF[3]);
printf("pilot %u : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",pilot_cnt,rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d) (%d)\n",pilot_cnt,rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fm,
ch,
......@@ -262,8 +267,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("ch 0 %d\n",((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1]));
printf("pilot %u: rxF - > (%d,%d) addr %p ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt+1,rxF[0],rxF[1],&rxF[0],ch[0],ch[1],pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d)\n",pilot_cnt+1,rxF[2],rxF[3]);
printf("pilot %u : rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",pilot_cnt+1,rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d) (%d)\n",pilot_cnt+1,rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fmr,
ch,
......@@ -278,8 +283,8 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_PUSCH
printf("pilot %u: rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt+2,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d)\n",pilot_cnt+2,rxF[2],rxF[3]);
printf("pilot %u: rxF - > (%d,%d) (%d) ch -> (%d,%d) (%d), pil -> (%d,%d) \n",pilot_cnt+2,rxF[0],rxF[1],dBc(rxF[0],rxF[1]),ch[0],ch[1],dBc(ch[0],ch[1]),pil[0],pil[1]);
printf("data %u : rxF - > (%d,%d) (%d)\n",pilot_cnt+2,rxF[2],rxF[3],dBc(rxF[2],rxF[3]));
#endif
multadd_real_vector_complex_scalar(fr,
ch,
......
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
View file @ 1b06523c
......@@ -318,7 +318,7 @@ void nr_ulsch_extract_rbs_single(int32_t **rxdataF,
}
#ifdef DEBUG_RB_EXT
printf("re = %d, ptrs_symbol_flag = %d, symbol = %d\n", re, ptrs_symbol_flag, symbol);
printf("re = %d, kprime %d, n %d, is_ptrs_symbol = %d, symbol = %d\n", re, k_prime,n,is_ptrs_symbol, symbol);
#endif
if ( is_dmrs_re == 0 && is_ptrs_re == 0) {
......@@ -329,7 +329,9 @@ void nr_ulsch_extract_rbs_single(int32_t **rxdataF,
ul_ch0_ptrs_ext[ul_ch0_ptrs_ext_index] = ul_ch0_ptrs[ul_ch0_ptrs_index];
#ifdef DEBUG_RB_EXT
printf("rxF_ext[%d] = (%d,%d)\n", rxF_ext_index>>1, rxF_ext[rxF_ext_index],rxF_ext[rxF_ext_index+1]);
printf("dmrs symb %d: rxF_ext[%d] = (%d,%d), ul_ch0_ext[%d] = (%d,%d)\n",
is_dmrs_symbol,rxF_ext_index>>1, rxF_ext[rxF_ext_index],rxF_ext[rxF_ext_index+1],
ul_ch0_ext_index, ((int16_t*)&ul_ch0_ext[ul_ch0_ext_index])[0], ((int16_t*)&ul_ch0_ext[ul_ch0_ext_index])[1]);
#endif
ul_ch0_ext_index++;
ul_ch0_ptrs_ext_index++;
......@@ -1088,6 +1090,9 @@ int nr_rx_pusch(PHY_VARS_gNB *gNB,
dmrs_symbol_flag = ((rel15_ul->ul_dmrs_symb_pos)>>symbol)&0x01;
LOG_D(PHY,"symbol %d bwp_start_subcarrier %d, rb_start %d, first_carrier_offset %d\n",symbol,bwp_start_subcarrier,rel15_ul->rb_start,frame_parms->first_carrier_offset);
LOG_D(PHY,"ul_dmrs_symb_pos %x\n",rel15_ul->ul_dmrs_symb_pos);
if (dmrs_symbol_flag == 1){
if (((rel15_ul->ul_dmrs_symb_pos)>>((symbol+1)%frame_parms->symbols_per_slot))&0x01)
AssertFatal(1==0,"Double DMRS configuration is not yet supported\n");
......@@ -1100,6 +1105,7 @@ int nr_rx_pusch(PHY_VARS_gNB *gNB,
else {
nb_re_pusch = rel15_ul->rb_size *(12 - (rel15_ul->num_dmrs_cdm_grps_no_data*4));
}
LOG_D(PHY,"dmrs_symbol: nb_re_pusch %d\n",nb_re_pusch);
gNB->pusch_vars[ulsch_id]->dmrs_symbol = symbol;
} else {
nb_re_pusch = rel15_ul->rb_size * NR_NB_SC_PER_RB;
......
openair1/PHY/NR_UE_TRANSPORT/nr_ulsch_ue.c
View file @ 1b06523c
......@@ -458,6 +458,19 @@ uint8_t nr_ue_pusch_common_procedures(PHY_VARS_NR_UE *UE,
txdata = UE->common_vars.txdata;
txdataF = UE->common_vars.txdataF;
int symb_offset = (slot%frame_parms->slots_per_subframe)*frame_parms->symbols_per_slot;
for(ap = 0; ap < Nl; ap++) {
for (int s=0;s<NR_NUMBER_OF_SYMBOLS_PER_SLOT;s++){
LOG_D(PHY,"rotating txdataF symbol %d (%d) => (%d.%d)\n",
s,s+symb_offset,frame_parms->symbol_rotation[2*(s+symb_offset)],frame_parms->symbol_rotation[1+(2*(s+symb_offset))]);
rotate_cpx_vector((int16_t *)&txdataF[ap][frame_parms->ofdm_symbol_size*s],
&frame_parms->symbol_rotation[2*(s+symb_offset)],
(int16_t *)&txdataF[ap][frame_parms->ofdm_symbol_size*s],
frame_parms->ofdm_symbol_size,
15);
}
}
if(UE->N_TA_offset > tx_offset) {
int32_t *tmp_idft_out = (int32_t*)malloc16(frame_parms->get_samples_per_slot(slot, frame_parms) * sizeof(int32_t));
......
openair1/PHY/defs_nr_common.h
View file @ 1b06523c
......@@ -322,6 +322,8 @@ struct NR_DL_FRAME_PARMS {
uint8_t nb_antenna_ports_gNB;
/// Cyclic Prefix for DL (0=Normal CP, 1=Extended CP)
lte_prefix_type_t Ncp;
/// sequence which is computed based on carrier frequency and numerology to rotate/derotate each OFDM symbol according to Section 5.3 in 38.211
int16_t symbol_rotation[224*2];
/// shift of pilot position in one RB
uint8_t nushift;
/// SRS configuration from TS 38.331 RRC
......
openair1/SCHED_NR/nr_ru_procedures.c
View file @ 1b06523c
......@@ -88,13 +88,28 @@ void nr_feptx0(RU_t *ru,int tti_tx,int first_symbol, int num_symbols, int aa) {
else {
if (fp->numerology_index != 0) {
if (!(slot%(fp->slots_per_subframe/2))&&(first_symbol==0)) {
if (!(slot%(fp->slots_per_subframe/2))&&(first_symbol==0)) { // case where first symbol in slot has longer prefix
apply_nr_rotation(fp,
(int16_t*)&ru->common.txdataF_BF[aa][slot_offsetF],
slot,
0,
1,
fp->ofdm_symbol_size);
PHY_ofdm_mod(&ru->common.txdataF_BF[aa][slot_offsetF],
(int*)&ru->common.txdata[aa][slot_offset],
fp->ofdm_symbol_size,
1,
fp->nb_prefix_samples0,
CYCLIC_PREFIX);
apply_nr_rotation(fp,
(int16_t*)&ru->common.txdataF_BF[aa][slot_offsetF+fp->ofdm_symbol_size],
slot,
1,
num_symbols-1,
fp->ofdm_symbol_size);
PHY_ofdm_mod(&ru->common.txdataF_BF[aa][slot_offsetF+fp->ofdm_symbol_size],
(int*)&ru->common.txdata[aa][slot_offset+fp->nb_prefix_samples0+fp->ofdm_symbol_size],
fp->ofdm_symbol_size,
......@@ -102,7 +117,13 @@ void nr_feptx0(RU_t *ru,int tti_tx,int first_symbol, int num_symbols, int aa) {
fp->nb_prefix_samples,
CYCLIC_PREFIX);
}
else {
else { // all symbols in slot have shorter prefix
apply_nr_rotation(fp,
(int16_t*)&ru->common.txdataF_BF[aa][slot_offsetF],
slot,
first_symbol,
num_symbols,
fp->ofdm_symbol_size);
PHY_ofdm_mod(&ru->common.txdataF_BF[aa][slot_offsetF],
(int*)&ru->common.txdata[aa][slot_offset],
fp->ofdm_symbol_size,
......@@ -110,9 +131,8 @@ void nr_feptx0(RU_t *ru,int tti_tx,int first_symbol, int num_symbols, int aa) {
fp->nb_prefix_samples,
CYCLIC_PREFIX);
}
}
else {
} // numerology_index!=0
else { //numerology_index == 0
for (uint16_t idx_sym=abs_first_symbol; idx_sym<abs_first_symbol+num_symbols; idx_sym++) {
if (idx_sym%0x7) {
PHY_ofdm_mod(&ru->common.txdataF_BF[aa][slot_offsetF],
......@@ -121,6 +141,12 @@ void nr_feptx0(RU_t *ru,int tti_tx,int first_symbol, int num_symbols, int aa) {
1,
fp->nb_prefix_samples,
CYCLIC_PREFIX);
apply_nr_rotation(fp,
(int16_t*)&ru->common.txdata[aa][slot_offset],
slot,
idx_sym,
1,
fp->ofdm_symbol_size+fp->nb_prefix_samples);
slot_offset += fp->nb_prefix_samples+fp->ofdm_symbol_size;
}
else {
......@@ -130,6 +156,12 @@ void nr_feptx0(RU_t *ru,int tti_tx,int first_symbol, int num_symbols, int aa) {
1,
fp->nb_prefix_samples0,
CYCLIC_PREFIX);
apply_nr_rotation(fp,
(int16_t*)&ru->common.txdata[aa][slot_offset],
slot,
0,
1,
fp->ofdm_symbol_size+fp->nb_prefix_samples0);
slot_offset += fp->nb_prefix_samples0+fp->ofdm_symbol_size;
}
}
......
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 1b06523c
......@@ -253,6 +253,20 @@ void nr_ulsch_procedures(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int ULSCH
pusch_pdu->qam_mod_order,
pusch_pdu->nrOfLayers);
AssertFatal(G>0,"G is 0 : rb_size %d, number_symbols %d, nb_re_dmrs %d, number_dmrs_symbols %d, qam_mod_order %d, nrOfLayer %d\n",
pusch_pdu->rb_size,
number_symbols,
nb_re_dmrs,
number_dmrs_symbols, // number of dmrs symbols irrespective of single or double symbol dmrs
pusch_pdu->qam_mod_order,
pusch_pdu->nrOfLayers);
LOG_D(PHY,"rb_size %d, number_symbols %d, nb_re_dmrs %d, number_dmrs_symbols %d, qam_mod_order %d, nrOfLayer %d\n",
pusch_pdu->rb_size,
number_symbols,
nb_re_dmrs,
number_dmrs_symbols, // number of dmrs symbols irrespective of single or double symbol dmrs
pusch_pdu->qam_mod_order,
pusch_pdu->nrOfLayers);
//----------------------------------------------------------
//------------------- ULSCH unscrambling -------------------
//----------------------------------------------------------
......@@ -281,11 +295,11 @@ void nr_ulsch_procedures(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int ULSCH
if (ret > gNB->ulsch[ULSCH_id][0]->max_ldpc_iterations){
LOG_I(PHY, "ULSCH %d in error\n",ULSCH_id);
LOG_D(PHY, "ULSCH %d in error\n",ULSCH_id);
nr_fill_indication(gNB,frame_rx, slot_rx, ULSCH_id, harq_pid, 1);
}
else if(gNB->ulsch[ULSCH_id][0]->harq_processes[harq_pid]->b!=NULL){
LOG_I(PHY, "ULSCH received ok \n");
LOG_D(PHY, "ULSCH received ok \n");
nr_fill_indication(gNB,frame_rx, slot_rx, ULSCH_id, harq_pid, 0);
}
}
......@@ -323,12 +337,12 @@ void nr_fill_indication(PHY_VARS_gNB *gNB, int frame, int slot_rx, int ULSCH_id,
if (timing_advance_update < 0) timing_advance_update = 0;
if (timing_advance_update > 63) timing_advance_update = 63;
LOG_I(PHY, "Estimated timing advance PUSCH is = %d, timing_advance_update is %d \n", sync_pos,timing_advance_update);
LOG_D(PHY, "Estimated timing advance PUSCH is = %d, timing_advance_update is %d \n", sync_pos,timing_advance_update);
// estimate UL_CQI for MAC (from antenna port 0 only)
int SNRtimes10 = dB_fixed_times10(gNB->pusch_vars[ULSCH_id]->ulsch_power[0]) - (10*gNB->measurements.n0_power_dB[0]);
LOG_I(PHY, "Estimated SNR for PUSCH is = %d dB\n", SNRtimes10/10);
LOG_D(PHY, "Estimated SNR for PUSCH is = %d dB\n", SNRtimes10/10);
if (SNRtimes10 < -640) cqi=0;
else if (SNRtimes10 > 635) cqi=255;
......@@ -522,7 +536,7 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
(ulsch_harq->slot == slot_rx) &&
(ulsch_harq->handled == 0)){
LOG_I(PHY, "PUSCH generation started in frame %d slot %d\n",
LOG_D(PHY, "PUSCH detection started in frame %d slot %d\n",
frame_rx,slot_rx);
#ifdef DEBUG_RXDATA
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ 1b06523c
......@@ -1426,7 +1426,7 @@ void ue_ulsch_uespec_procedures(PHY_VARS_NR_UE *ue,
}
if (isBad) {
LOG_I(PHY,"Skip PUSCH generation!\n");
LOG_D(PHY,"Skip PUSCH generation!\n");
ue->ulsch[eNB_id]->harq_processes[harq_pid]->subframe_scheduling_flag = 0;
}
}
......@@ -2231,7 +2231,7 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
memset(ue->common_vars.txdataF[0], 0, sizeof(int)*14*ue->frame_parms.ofdm_symbol_size);
LOG_I(PHY,"****** start TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx);
LOG_D(PHY,"****** start TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx);
#if UE_TIMING_TRACE
start_meas(&ue->phy_proc_tx);
......@@ -2252,14 +2252,14 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
*/
if (get_softmodem_params()->usim_test==0) {
LOG_I(PHY, "Generating PUCCH\n");
LOG_D(PHY, "Generating PUCCH\n");
pucch_procedures_ue_nr(ue,
gNB_id,
proc,
FALSE);
}
LOG_I(PHY, "Sending Uplink data \n");
LOG_D(PHY, "Sending Uplink data \n");
nr_ue_pusch_common_procedures(ue,
slot_tx,
&ue->frame_parms,1);
......@@ -2273,7 +2273,7 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
nr_ue_prach_procedures(ue, proc, gNB_id, mode);
}
}
LOG_I(PHY,"****** end TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx);
LOG_D(PHY,"****** end TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX, VCD_FUNCTION_OUT);
#if UE_TIMING_TRACE
......@@ -4055,6 +4055,8 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
int coreset_nb_rb=0;
int coreset_start_rb=0;
int symbol_offset_in_subframe=0;
if (pdcch_vars->nb_search_space > 0)
get_coreset_rballoc(pdcch_vars->pdcch_config[0].coreset.frequency_domain_resource,&coreset_nb_rb,&coreset_start_rb);
......@@ -4064,7 +4066,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
if ((ue->decode_MIB == 1) && slot_pbch)
{
LOG_I(PHY," ------ PBCH ChannelComp/LLR: frame.slot %d.%d ------ \n", frame_rx%1024, nr_tti_rx);
symbol_offset_in_subframe = (nr_tti_rx % fp->slots_per_subframe)*fp->symbols_per_slot;
for (int i=1; i<4; i++) {
nr_slot_fep(ue,
......
openair1/SIMULATION/NR_PHY/dlsim.c
View file @ 1b06523c
......@@ -38,6 +38,7 @@
#include "PHY/types.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/nr_modulation.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/NR_REFSIG/nr_mod_table.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
......@@ -573,6 +574,7 @@ int main(int argc, char **argv)
channel_model,
fs,
bw,
30e-9,
0,
0,
0);
......@@ -779,12 +781,12 @@ int main(int argc, char **argv)
int txdataF_offset = (slot%2) * frame_parms->samples_per_slot_wCP;
if (n_trials==1) {
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0],frame_length_complex_samples_no_prefix,1,1);
LOG_M("txsigF0.m","txsF0", &gNB->common_vars.txdataF[0][txdataF_offset],frame_parms->samples_per_slot_wCP,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[1],frame_length_complex_samples_no_prefix,1,1);
LOG_M("txsigF1.m","txsF1", &gNB->common_vars.txdataF[1][txdataF_offset],frame_parms->samples_per_slot_wCP,1,1);
}
int tx_offset = frame_parms->get_samples_slot_timestamp(slot,frame_parms,0);
if (n_trials==1) printf("samples_per_slot_wCP = %d\n", frame_parms->samples_per_slot_wCP);
if (n_trials==1) printf("tx_offset %d, txdataF_offset %d \n", tx_offset,txdataF_offset);
//TODO: loop over slots
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
......@@ -796,18 +798,45 @@ int main(int argc, char **argv)
12,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
} else {
} else {/*
nr_normal_prefix_mod(&gNB->common_vars.txdataF[aa][txdataF_offset],
&txdata[aa][tx_offset],
14,
frame_parms);
*/
PHY_ofdm_mod(&gNB->common_vars.txdataF[aa][txdataF_offset],
(int*)&txdata[aa][tx_offset],
frame_parms->ofdm_symbol_size,
1,
frame_parms->nb_prefix_samples0,
CYCLIC_PREFIX);
apply_nr_rotation(frame_parms,
(int16_t*)&txdata[aa][tx_offset],
slot,
0,
1,
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples0);
PHY_ofdm_mod(&gNB->common_vars.txdataF[aa][txdataF_offset+frame_parms->ofdm_symbol_size],
(int*)&txdata[aa][tx_offset+frame_parms->nb_prefix_samples0+frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size,
13,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
apply_nr_rotation(frame_parms,
(int16_t*)&txdata[aa][tx_offset+frame_parms->nb_prefix_samples0+frame_parms->ofdm_symbol_size],
slot,
1,
13,
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
}
}
if (n_trials==1) {
LOG_M("txsig0.m","txs0", txdata[0],frame_length_complex_samples,1,1);
LOG_M("txsig0.m","txs0", &txdata[0][tx_offset],frame_parms->get_samples_slot_timestamp(slot,frame_parms,0),1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsig1.m","txs1", txdata[1],frame_length_complex_samples,1,1);
LOG_M("txsig1.m","txs1", &txdata[1][tx_offset],frame_parms->get_samples_slot_timestamp(slot,frame_parms,0),1,1);
}
if (output_fd) {
printf("writing txdata to binary file\n");
......
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ 1b06523c
......@@ -60,6 +60,10 @@ uint16_t NB_UE_INST = 1;
// needed for some functions
openair0_config_t openair0_cfg[MAX_CARDS];
uint8_t const nr_rv_round_map[4] = {0, 2, 1, 3};
uint8_t const nr_rv_round_map_ue[4] = {0, 2, 1, 3};
uint64_t get_softmodem_optmask(void) {return 0;}
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
......@@ -468,6 +472,7 @@ int main(int argc, char **argv)
channel_model,
fs,
bw,
300e-9,
0,
0,
0);
......
openair1/SIMULATION/NR_PHY/ulsim.c
View file @ 1b06523c
......@@ -143,12 +143,12 @@ int main(int argc, char **argv)
//unsigned char frame_type = 0;
NR_DL_FRAME_PARMS *frame_parms;
int loglvl = OAILOG_WARNING;
int loglvl = OAILOG_INFO;
//uint64_t SSB_positions=0x01;
uint16_t nb_symb_sch = 12;
int start_symbol = 0;
uint16_t nb_rb = 50;
uint8_t Imcs = 9;
int Imcs = 9;
uint8_t precod_nbr_layers = 1;
int gNB_id = 0;
int ap;
......@@ -161,7 +161,7 @@ int main(int argc, char **argv)
int print_perf = 0;
cpuf = get_cpu_freq_GHz();
int msg3_flag = 0;
uint8_t rv_index = 0;
int rv_index = 0;
float roundStats[50];
float effRate;
float eff_tp_check = 0.7;
......@@ -169,6 +169,7 @@ int main(int argc, char **argv)
UE_nr_rxtx_proc_t UE_proc;
FILE *scg_fd=NULL;
int file_offset;
double DS_TDL = .03;
int pusch_tgt_snrx10 = 200;
......@@ -182,7 +183,7 @@ int main(int argc, char **argv)
//logInit();
randominit(0);
while ((c = getopt(argc, argv, "a:b:c:d:ef:g:h:i:j:kl:m:n:p:r:s:y:z:F:M:N:PR:S:L:")) != -1) {
while ((c = getopt(argc, argv, "a:b:c:d:ef:g:h:i:j:kl:m:n:p:r:s:y:z:F:M:N:PR:S:L:G:H:")) != -1) {
printf("handling optarg %c\n",c);
switch (c) {
......@@ -387,6 +388,14 @@ int main(int argc, char **argv)
loglvl = atoi(optarg);
break;
case 'G':
file_offset = atoi(optarg);
break;
case 'H':
slot = atoi(optarg);
break;
default:
case 'h':
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n", argv[0]);
......@@ -636,6 +645,55 @@ int main(int argc, char **argv)
//for (int i=0;i<16;i++) printf("%f\n",gaussdouble(0.0,1.0));
snrRun = 0;
int n_errs;
double factor = 1;
if (openair0_cfg[0].threequarter_fs== 1) factor =.75;
int ta_offset=1600;
if (N_RB_DL <217) ta_offset=800;
else if (N_RB_DL < 106) ta_offset = 400;
int slot_offset = frame_parms->get_samples_slot_timestamp(slot,frame_parms,0);// - (int)(800*factor);
int slot_length = slot_offset - frame_parms->get_samples_slot_timestamp(slot-1,frame_parms,0);
if (input_fd != NULL) {
AssertFatal(frame_parms->nb_antennas_rx == 1, "nb_ant != 1\n");
// 800 samples is N_TA_OFFSET for FR1 @ 30.72 Ms/s,
AssertFatal(frame_parms->subcarrier_spacing==30000,"only 30 kHz for file input for now (%d)\n",frame_parms->subcarrier_spacing);
// slot_offset -= (int)(800*factor);
fseek(input_fd,file_offset*((slot_length<<2)+4000+16),SEEK_SET);
fread((void*)&n_rnti,sizeof(int16_t),1,input_fd);
printf("rnti %x\n",n_rnti);
fread((void*)&nb_rb,sizeof(int16_t),1,input_fd);
printf("nb_rb %d\n",nb_rb);
int16_t dummy;
fread((void*)&start_rb,sizeof(int16_t),1,input_fd);
//fread((void*)&dummy,sizeof(int16_t),1,input_fd);
printf("rb_start %d\n",start_rb);
fread((void*)&nb_symb_sch,sizeof(int16_t),1,input_fd);
//fread((void*)&dummy,sizeof(int16_t),1,input_fd);
printf("nb_symb_sch %d\n",nb_symb_sch);
fread((void*)&start_symbol,sizeof(int16_t),1,input_fd);
printf("start_symbol %d\n",start_symbol);
fread((void*)&Imcs,sizeof(int16_t),1,input_fd);
printf("mcs %d\n",Imcs);
fread((void*)&rv_index,sizeof(int16_t),1,input_fd);
printf("rv_index %d\n",rv_index);
// fread((void*)&harq_pid,sizeof(int16_t),1,input_fd);
fread((void*)&dummy,sizeof(int16_t),1,input_fd);
printf("harq_pid %d\n",harq_pid);
fread((void*)&gNB->common_vars.rxdata[0][slot_offset-delay],
sizeof(int16_t),
slot_length<<1,
input_fd);
for (int i=0;i<16;i+=2) printf("slot_offset %d : %d,%d\n",
slot_offset,
((int16_t*)&gNB->common_vars.rxdata[0][slot_offset])[i],
((int16_t*)&gNB->common_vars.rxdata[0][slot_offset])[1+i]);
fclose(input_fd);
}
for (SNR = snr0; SNR < snr1; SNR += snr_step) {
varArray_t *table_rx=initVarArray(1000,sizeof(double));
int error_flag = 0;
......@@ -704,7 +762,7 @@ int main(int argc, char **argv)
else
pusch_pdu->bwp_start = ibwp_start;
pusch_pdu->bwp_size = ibwp_size;
start_rb += (ibwp_start - abwp_start);
start_rb = (ibwp_start - abwp_start);
printf("msg3: ibwp_size %d, abwp_size %d, ibwp_start %d, abwp_start %d\n",
ibwp_size,abwp_size,ibwp_start,abwp_start);
}
......@@ -727,7 +785,7 @@ int main(int argc, char **argv)
pusch_pdu->ul_dmrs_scrambling_id = *scc->physCellId;
pusch_pdu->scid = 0;
pusch_pdu->dmrs_ports = 1;
pusch_pdu->num_dmrs_cdm_grps_no_data = 1;
pusch_pdu->num_dmrs_cdm_grps_no_data = msg3_flag == 0 ? 1 : 2;
pusch_pdu->resource_alloc = 1;
pusch_pdu->rb_start = start_rb;
pusch_pdu->rb_size = nb_rb;
......@@ -792,8 +850,6 @@ int main(int argc, char **argv)
ul_config.ul_config_list[0].pusch_config_pdu.pusch_data.tb_size = TBS;
nr_fill_ulsch(gNB,frame,slot,pusch_pdu);
int slot_offset = frame_parms->get_samples_slot_timestamp(slot,frame_parms,0);// - (int)(800*factor);
int slot_length = slot_offset - frame_parms->get_samples_slot_timestamp(slot-1,frame_parms,0);
for (int i=0;i<(TBS>>3);i++) ulsch_ue[0]->harq_processes[harq_pid]->a[i]=i&0xff;
double scale = 1;
......@@ -858,26 +914,7 @@ int main(int argc, char **argv)
}
}
else {
AssertFatal(frame_parms->nb_antennas_rx == 1, "nb_ant != 1\n");
// 800 samples is N_TA_OFFSET for FR1 @ 30.72 Ms/s,
AssertFatal(frame_parms->subcarrier_spacing==30000,"only 30 kHz for file input for now (%d)\n",frame_parms->subcarrier_spacing);
double factor = 1;
if (openair0_cfg[0].threequarter_fs== 1) factor =.75;
int ta_offset=1600;
if (N_RB_DL <217) ta_offset=800;
else if (N_RB_DL < 106) ta_offset = 400;
fseek(input_fd,(slot_length<<2)+2000,SEEK_SET);
fread((void*)&gNB->common_vars.rxdata[0][slot_offset],
sizeof(int16_t),
slot_length<<1,
input_fd);
for (int i=0;i<16;i+=2) printf("slot_offset %d : %d,%d\n",
slot_offset,
((int16_t*)&gNB->common_vars.rxdata[0][slot_offset])[i],
((int16_t*)&gNB->common_vars.rxdata[0][slot_offset])[1+i]);
fclose(input_fd);
}
////////////////////////////////////////////////////////////
//----------------------------------------------------------
......@@ -890,21 +927,28 @@ int main(int argc, char **argv)
phy_procedures_gNB_common_RX(gNB, frame, slot);
if (n_trials==1 && round==0) {
LOG_M("rxsig0.m","rx0",&gNB->common_vars.rxdata[0][0],frame_parms->samples_per_subframe*10,1,1);
LOG_M("rxsig0.m","rx0",&gNB->common_vars.rxdata[0][slot_offset],slot_length,1,1);
LOG_M("rxsigF0.m","rxsF0",gNB->common_vars.rxdataF[0]+start_symbol*frame_parms->ofdm_symbol_size,nb_symb_sch*frame_parms->ofdm_symbol_size,1,1);
}
phy_procedures_gNB_uespec_RX(gNB, frame, slot);
if (n_trials == 1 && round==0) {
#ifdef __AVX2__
int off = ((nb_rb&1) == 1)? 4:0;
#else
int off = 0;
#endif
LOG_M("rxsigF0_ext.m","rxsF0_ext",
&gNB->pusch_vars[0]->rxdataF_ext[0][(start_symbol+1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size],(nb_symb_sch-1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size,1,1);
&gNB->pusch_vars[0]->rxdataF_ext[0][start_symbol*NR_NB_SC_PER_RB * pusch_pdu->rb_size],nb_symb_sch*(off+(NR_NB_SC_PER_RB * pusch_pdu->rb_size)),1,1);
LOG_M("chestF0.m","chF0",
&gNB->pusch_vars[0]->ul_ch_estimates[0][start_symbol*frame_parms->ofdm_symbol_size],frame_parms->ofdm_symbol_size,1,1);
LOG_M("chestF0_ext.m","chF0_ext",
&gNB->pusch_vars[0]->ul_ch_estimates_ext[0][(start_symbol+1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size],(nb_symb_sch-1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size,1,1);
&gNB->pusch_vars[0]->ul_ch_estimates_ext[0][(start_symbol+1)*(off+(NR_NB_SC_PER_RB * pusch_pdu->rb_size))],
(nb_symb_sch-1)*(off+(NR_NB_SC_PER_RB * pusch_pdu->rb_size)),1,1);
LOG_M("rxsigF0_comp.m","rxsF0_comp",
&gNB->pusch_vars[0]->rxdataF_comp[0][(start_symbol+1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size],(nb_symb_sch-1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size,1,1);
&gNB->pusch_vars[0]->rxdataF_comp[0][start_symbol*(off+(NR_NB_SC_PER_RB * pusch_pdu->rb_size))],nb_symb_sch*(off+(NR_NB_SC_PER_RB * pusch_pdu->rb_size)),1,1);
LOG_M("rxsigF0_llr.m","rxsF0_llr",
&gNB->pusch_vars[0]->llr[0],(nb_symb_sch-1)*NR_NB_SC_PER_RB * pusch_pdu->rb_size * mod_order,1,0);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment