/******************************************************************************* OpenAirInterface Copyright(c) 1999 - 2014 Eurecom OpenAirInterface is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. OpenAirInterface is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenAirInterface.The full GNU General Public License is included in this distribution in the file called "COPYING". If not, see . Contact Information OpenAirInterface Admin: openair_admin@eurecom.fr OpenAirInterface Tech : openair_tech@eurecom.fr OpenAirInterface Dev : openair4g-devel@eurecom.fr Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE *******************************************************************************/ /*! \file common_lib.h * \brief common APIs for different RF frontend device * \author HongliangXU, Navid Nikaein * \date 2015 * \version 0.2 * \company Eurecom * \maintainer: navid.nikaein@eurecom.fr * \note * \warning */ #ifndef COMMON_LIB_H #define COMMON_LIB_H #include typedef int64_t openair0_timestamp; typedef volatile int64_t openair0_vtimestamp; typedef struct openair0_device_t openair0_device; /* structrue holds the parameters to configure USRP devices */ #ifndef EXMIMO #define MAX_CARDS 1 #endif #define USRP_GAIN_OFFSET (56.0) // 86 calibrated for USRP B210 @ 2.6 GHz to get equivalent RS EPRE in OAI to SMBV100 output typedef enum { max_gain=0,med_gain,byp_gain } rx_gain_t; typedef struct { //! Module ID for this configuration int Mod_id; // device log level int log_level; //! number of downlink resource blocks int num_rb_dl; //! number of samples per frame unsigned int samples_per_frame; //! the sample rate for both transmit and receive. double sample_rate; //! number of samples per RX/TX packet (USRP + Ethernet) int samples_per_packet; // delay in sending samples (write) due to hardware access, softmodem processing and fronthaul delay if exist int tx_delay; //! adjust the position of the samples after delay when sending unsigned int tx_forward_nsamps; //! number of RX channels (=RX antennas) int rx_num_channels; //! number of TX channels (=TX antennas) int tx_num_channels; //! \brief Center frequency in Hz for RX. //! index: [0..rx_num_channels[ double rx_freq[4]; //! \brief Center frequency in Hz for TX. //! index: [0..rx_num_channels[ !!! see lte-ue.c:427 FIXME iterates over rx_num_channels double tx_freq[4]; //! mode for rxgain (ExpressMIMO2) rx_gain_t rxg_mode[4]; //! \brief Gain for RX in dB. //! index: [0..rx_num_channels] double rx_gain[4]; //! gain for TX in dB double tx_gain[4]; //! RX bandwidth in Hz double rx_bw; //! TX bandwidth in Hz double tx_bw; //! Auto calibration flag int autocal[4]; //! RRH IP addr for Ethernet interface char *remote_ip; //! RRH port number for Ethernet interface int remote_port; //! my IP addr for Ethernet interface (eNB/BBU, UE) char *my_ip; //! my port number for Ethernet interface (eNB/BBU, UE) int my_port; } openair0_config_t; typedef struct { /* card id */ int card; /* rf chain id */ int chain; } openair0_rf_map; /*!\brief device type */ typedef enum { MIN_DEV_TYPE = 0, /*!\brief device is ETH */ ETH_IF, /*!\brief device is ExpressMIMO */ EXMIMO_IF, /*!\brief device is USRP*/ USRP_IF, /*!\brief device is BLADE RF*/ BLADERF_IF, /*!\brief device is NONE*/ NONE_IF, MAX_DEV_TYPE } dev_type_t; /*!\brief type */ typedef enum { MIN_FUNC_TYPE = 0, BBU_FUNC, RRH_FUNC, MAX_FUNC_TYPE }func_type_t; struct openair0_device_t { /* Module ID of this device */ int Mod_id; /* Type of this device */ func_type_t func_type; /* Type of this device */ dev_type_t type; /* RF frontend parameters set by application */ openair0_config_t openair0_cfg; /* Can be used by driver to hold internal structure*/ void *priv; /* Functions API, which are called by the application*/ /* Called to start the transceiver. Return 0 if OK, < 0 if error */ int (*trx_start_func)(openair0_device *device); /* Called to initiate transceiver threads */ void (*trx_thread_func)(openair0_device *device, unsigned int rt_period, uint8_t RT_flag,uint8_t NRT_flag); /* Called to request connection from the transceiver/RRH. Return 0 if OK, < 0 if error */ int (*trx_request_func)(openair0_device *device); /* Called to reply back to connection state to eNB/BBU. Return 0 if OK, < 0 if error */ int (*trx_reply_func)(openair0_device *openair0); /* Write 'nsamps' samples on each channel from buffers. buff[0] is the array for * the first channel. timestamp if the time (in samples) at which the first sample * MUST be sent * use flags = 1 to send as timestamp specfied*/ int (*trx_write_func)(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int antenna_id, int flags); /*! \brief Receive samples from hardware. * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for * the first channel. *ptimestamp is the time at which the first sample * was received. * \param device the hardware to use * \param[out] ptimestamp the time at which the first sample was received. * \param[out] An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps. * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte. * \param cc Number of channels. If cc == 1, only buff[0] is filled with samples. * \returns the number of sample read */ int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps,int antenna_id); /*! \brief print the device statistics * \param device the hardware to use * \returns 0 on success */ int (*trx_get_stats_func)(openair0_device *device); /*! \brief Reset device statistics * \param device the hardware to use * \returns 0 in success */ int (*trx_reset_stats_func)(openair0_device *device); /* Terminate operation of the transceiver -- free all associated resources */ void (*trx_end_func)(openair0_device *device); }; #ifdef __cplusplus extern "C" { #endif /* return 0 if OK */ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg); openair0_timestamp get_usrp_time(openair0_device *device); //EXMIMO //int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg); //USPRP //int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg); //BLADERF //int openair0_dev_init_bladerf(openair0_device* device, openair0_config_t *openair0_cfg); //ETHERNET int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg); int openair0_set_frequencies(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config); int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg); int openair0_set_gains(openair0_device* device, openair0_config_t *openair0_cfg); int openair0_print_stats(openair0_device* device); int openair0_reset_stats(openair0_device* device); int openair0_stop(int card); #ifdef __cplusplus } #endif #endif // COMMON_LIB_H