/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file common_lib.h
* \brief common APIs for different RF frontend device
* \author HongliangXU, Navid Nikaein
* \date 2015
* \version 0.2
* \company Eurecom
* \maintainer: navid.nikaein@eurecom.fr
* \note
* \warning
*/
#ifndef COMMON_LIB_H
#define COMMON_LIB_H
#include <stdint.h>
#include <stdio.h>
#include <sys/types.h>
#include <openair1/PHY/TOOLS/tools_defs.h>
#include "record_player.h"
/* default name of shared library implementing the radio front end */
#define OAI_RF_LIBNAME "oai_device"
/* name of shared library implementing the transport */
#define OAI_TP_LIBNAME "oai_transpro"
/* name of shared library implementing a third-party transport */
#define OAI_THIRDPARTY_TP_LIBNAME "thirdparty_transpro"
/* name of shared library implementing the rf simulator */
#define OAI_RFSIM_LIBNAME "rfsimulator"
/* name of shared library implementing the basic simulator */
#define OAI_BASICSIM_LIBNAME "tcp_bridge_oai"
/* name of shared library implementing the iq player */
#define OAI_IQPLAYER_LIBNAME "oai_iqplayer"
/* flags for BBU to determine whether the attached radio head is local or remote */
#define RAU_LOCAL_RADIO_HEAD 0
#define RAU_REMOTE_RADIO_HEAD 1
#define RAU_REMOTE_THIRDPARTY_RADIO_HEAD 2
#define MAX_WRITE_THREAD_PACKAGE 10
#define MAX_WRITE_THREAD_BUFFER_SIZE 8
#ifndef MAX_CARDS
#define MAX_CARDS 8
#endif
typedef int64_t openair0_timestamp;
typedef volatile int64_t openair0_vtimestamp;
/*!\brief structure holds the parameters to configure USRP devices*/
typedef struct openair0_device_t openair0_device;
//#define USRP_GAIN_OFFSET (56.0) // 86 calibrated for USRP B210 @ 2.6 GHz to get equivalent RS EPRE in OAI to SMBV100 output
typedef enum {
max_gain=0,med_gain,byp_gain
} rx_gain_t;
typedef enum {
duplex_mode_TDD=1,duplex_mode_FDD=0
} duplex_mode_t;
/** @addtogroup _GENERIC_PHY_RF_INTERFACE_
* @{
*/
/*!\brief RF device types
*/
typedef enum {
MIN_RF_DEV_TYPE = 0,
/*!\brief device is ExpressMIMO */
EXMIMO_DEV,
/*!\brief device is USRP B200/B210*/
USRP_B200_DEV,
/*!\brief device is USRP X300/X310*/
USRP_X300_DEV,
/*!\brief device is USRP N300/N310*/
USRP_N300_DEV,
/*!\brief device is BLADE RF*/
BLADERF_DEV,
/*!\brief device is LMSSDR (SoDeRa)*/
LMSSDR_DEV,
/*!\brief device is Iris */
IRIS_DEV,
/*!\brief device is NONE*/
NONE_DEV,
/*!\brief device is ADRV9371_ZC706 */
ADRV9371_ZC706_DEV,
/*!\brief device is UEDv2 */
UEDv2_DEV,
RFSIMULATOR,
MAX_RF_DEV_TYPE
} dev_type_t;
#define DEVTYPE_NAMES {"","EXMIMO","USRP B200","USRP X300","USRP N300","BLADERF","LMSSDR","IRIS","No HW","ADRV9371_ZC706","UEDv2", "RFSIMULATOR"}
/*!\brief transport protocol types
*/
typedef enum {
MIN_TRANSP_TYPE = 0,
/*!\brief transport protocol ETHERNET */
ETHERNET_TP,
/*!\brief no transport protocol*/
NONE_TP,
MAX_TRANSP_TYPE
} transport_type_t;
/*!\brief openair0 device host type */
typedef enum {
MIN_HOST_TYPE = 0,
/*!\brief device functions within a RAU */
RAU_HOST,
/*!\brief device functions within a RRU */
RRU_HOST,
MAX_HOST_TYPE
} host_type_t;
/*! \brief RF Gain clibration */
typedef struct {
//! Frequency for which RX chain was calibrated
double freq;
//! Offset to be applied to RX gain
double offset;
} rx_gain_calib_table_t;
/*! \brief Clock source types */
typedef enum {
//! this means the paramter has not been set
unset=-1,
//! This tells the underlying hardware to use the internal reference
internal=0,
//! This tells the underlying hardware to use the external reference
external=1,
//! This tells the underlying hardware to use the gpsdo reference
gpsdo=2
} clock_source_t;
/*! \brief RF frontend parameters set by application */
typedef struct {
//! Module ID for this configuration
int Mod_id;
//! device log level
int log_level;
//! duplexing mode
duplex_mode_t duplex_mode;
//! number of downlink resource blocks
int num_rb_dl;
//! number of samples per frame
unsigned int samples_per_frame;
//! the sample rate for both transmit and receive.
double sample_rate;
//! flag to indicate that the device is doing mmapped DMA transfers
int mmapped_dma;
//! offset in samples between TX and RX paths
int tx_sample_advance;
//! samples per packet on the fronthaul interface
int samples_per_packet;
//! number of RX channels (=RX antennas)
int rx_num_channels;
//! number of TX channels (=TX antennas)
int tx_num_channels;
//! \brief RX base addresses for mmapped_dma
int32_t *rxbase[4];
//! \brief TX base addresses for mmapped_dma
int32_t *txbase[4];
//! \brief Center frequency in Hz for RX.
//! index: [0..rx_num_channels[
double rx_freq[4];
//! \brief Center frequency in Hz for TX.
//! index: [0..rx_num_channels[ !!! see lte-ue.c:427 FIXME iterates over rx_num_channels
double tx_freq[4];
//! \brief memory
//! \brief Pointer to Calibration table for RX gains
rx_gain_calib_table_t *rx_gain_calib_table;
//! mode for rxgain (ExpressMIMO2)
rx_gain_t rxg_mode[4];
//! \brief Gain for RX in dB.
//! index: [0..rx_num_channels]
double rx_gain[4];
//! \brief Gain offset (for calibration) in dB
//! index: [0..rx_num_channels]
double rx_gain_offset[4];
//! gain for TX in dB
double tx_gain[4];
//! RX bandwidth in Hz
double rx_bw;
//! TX bandwidth in Hz
double tx_bw;
//! clock source
clock_source_t clock_source;
//! timing_source
clock_source_t time_source;
//! Manual SDR IP address
//#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
char *sdr_addrs;
//! Auto calibration flag
int autocal[4];
//! rf devices work with x bits iqs when oai have its own iq format
//! the two following parameters are used to convert iqs
int iq_txshift;
int iq_rxrescale;
//! Configuration file for LMS7002M
char *configFilename;
//! remote IP/MAC addr for Ethernet interface
char *remote_addr;
//! remote port number for Ethernet interface
unsigned int remote_port;
//! local IP/MAC addr for Ethernet interface (eNB/BBU, UE)
char *my_addr;
//! local port number for Ethernet interface (eNB/BBU, UE)
unsigned int my_port;
//! record player configuration, definition in record_player.h
uint32_t recplay_mode;
recplay_conf_t *recplay_conf;
//! number of samples per tti
unsigned int samples_per_tti;
//! the sample rate for receive.
double rx_sample_rate;
//! the sample rate for transmit.
double tx_sample_rate;
//! check for threequarter sampling rate
int8_t threequarter_fs;
} openair0_config_t;
/*! \brief RF mapping */
typedef struct {
//! card id
int card;
//! rf chain id
int chain;
} openair0_rf_map;
typedef struct {
char *remote_addr;
//! remote port number for Ethernet interface (control)
uint16_t remote_portc;
//! remote port number for Ethernet interface (user)
uint16_t remote_portd;
//! local IP/MAC addr for Ethernet interface (eNB/RAU, UE)
char *my_addr;
//! local port number (control) for Ethernet interface (eNB/RAU, UE)
uint16_t my_portc;
//! local port number (user) for Ethernet interface (eNB/RAU, UE)
uint16_t my_portd;
//! local Ethernet interface (eNB/RAU, UE)
char *local_if_name;
//! transport type preference (RAW/UDP)
uint8_t transp_preference;
//! compression enable (0: No comp/ 1: A-LAW)
uint8_t if_compress;
} eth_params_t;
typedef struct {
//! Tx buffer for if device, keep one per subframe now to allow multithreading
void *tx[10];
//! Tx buffer (PRACH) for if device
void *tx_prach;
//! Rx buffer for if device
void *rx;
} if_buffer_t;
typedef struct {
openair0_timestamp timestamp;
void *buff[MAX_WRITE_THREAD_BUFFER_SIZE];// buffer to be write;
int nsamps;
int cc;
signed char first_packet;
signed char last_packet;
int flags_msb;
} openair0_write_package_t;
typedef struct {
openair0_write_package_t write_package[MAX_WRITE_THREAD_PACKAGE];
int start;
int end;
/// \internal This variable is protected by \ref mutex_write
int count_write;
/// pthread struct for trx write thread
pthread_t pthread_write;
/// pthread attributes for trx write thread
pthread_attr_t attr_write;
/// condition varible for trx write thread
pthread_cond_t cond_write;
/// mutex for trx write thread
pthread_mutex_t mutex_write;
} openair0_thread_t;
/*!\brief structure holds the parameters to configure USRP devices */
struct openair0_device_t {
/*!tx write thread*/
openair0_thread_t write_thread;
/*!brief Module ID of this device */
int Mod_id;
/*!brief Component Carrier ID of this device */
int CC_id;
/*!brief Type of this device */
dev_type_t type;
/*!brief Transport protocol type that the device supports (in case I/Q samples need to be transported) */
transport_type_t transp_type;
/*!brief Type of the device's host (RAU/RRU) */
host_type_t host_type;
/* !brief RF frontend parameters set by application */
openair0_config_t *openair0_cfg;
/* !brief ETH params set by application */
eth_params_t *eth_params;
//! record player data, definition in record_player.h
recplay_state_t *recplay_state;
/* !brief Indicates if device already initialized */
int is_init;
/*!brief Can be used by driver to hold internal structure*/
void *priv;
/* Functions API, which are called by the application*/
/*! \brief Called to start the transceiver. Return 0 if OK, < 0 if error
@param device pointer to the device structure specific to the RF hardware target
*/
int (*trx_start_func)(openair0_device *device);
/*! \brief Called to configure the device
@param device pointer to the device structure specific to the RF hardware target
*/
int (*trx_config_func)(openair0_device* device, openair0_config_t *openair0_cfg);
/*! \brief Called to send a request message between RAU-RRU on control port
@param device pointer to the device structure specific to the RF hardware target
@param msg pointer to the message structure passed between RAU-RRU
@param msg_len length of the message
*/
int (*trx_ctlsend_func)(openair0_device *device, void *msg, ssize_t msg_len);
/*! \brief Called to receive a reply message between RAU-RRU on control port
@param device pointer to the device structure specific to the RF hardware target
@param msg pointer to the message structure passed between RAU-RRU
@param msg_len length of the message
*/
int (*trx_ctlrecv_func)(openair0_device *device, void *msg, ssize_t msg_len);
/*! \brief Called to send samples to the RF target
@param device pointer to the device structure specific to the RF hardware target
@param timestamp The timestamp at whicch the first sample MUST be sent
@param buff Buffer which holds the samples (2 dimensional)
@param nsamps number of samples to be sent
@param number of antennas
@param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/
int (*trx_write_func)(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int antenna_id, int flags);
/*! \brief Called to send samples to the RF target
@param device pointer to the device structure specific to the RF hardware target
@param timestamp The timestamp at whicch the first sample MUST be sent
@param buff Buffer which holds the samples (1 dimensional)
@param nsamps number of samples to be sent
@param antenna_id index of the antenna if the device has multiple anteannas
@param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/
int (*trx_write_func2)(openair0_device *device, openair0_timestamp timestamp, void *buff, int nsamps,int antenna_id, int flags);
/*! \brief Receive samples from hardware.
* Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
* the first channel. *ptimestamp is the time at which the first sample
* was received.
* \param device the hardware to use
* \param[out] ptimestamp the time at which the first sample was received.
* \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param num_antennas number of antennas from which to receive samples
* \returns the number of sample read
*/
int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps,int num_antennas);
/*! \brief Receive samples from hardware, this version provides a single antenna at a time and returns.
* Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
* the first channel. *ptimestamp is the time at which the first sample
* was received.
* \param device the hardware to use
* \param[out] ptimestamp the time at which the first sample was received.
* \param[out] buff A pointers to a buffer for received samples. The buffer must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param antenna_id Index of antenna from which samples were received
* \returns the number of sample read
*/
int (*trx_read_func2)(openair0_device *device, openair0_timestamp *ptimestamp, void *buff, int nsamps,int *antenna_id);
/*! \brief print the device statistics
* \param device the hardware to use
* \returns 0 on success
*/
int (*trx_get_stats_func)(openair0_device *device);
/*! \brief Reset device statistics
* \param device the hardware to use
* \returns 0 in success
*/
int (*trx_reset_stats_func)(openair0_device *device);
/*! \brief Terminate operation of the transceiver -- free all associated resources
* \param device the hardware to use
*/
void (*trx_end_func)(openair0_device *device);
/*! \brief Stop operation of the transceiver
*/
int (*trx_stop_func)(openair0_device *device);
/* Functions API related to UE*/
/*! \brief Set RX feaquencies
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
* \param exmimo_dump_config dump EXMIMO configuration
* \returns 0 in success
*/
int (*trx_set_freq_func)(openair0_device *device, openair0_config_t *openair0_cfg,int exmimo_dump_config);
/*! \brief Set gains
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
* \returns 0 in success
*/
int (*trx_set_gains_func)(openair0_device *device, openair0_config_t *openair0_cfg);
/*! \brief RRU Configuration callback
* \param idx RU index
* \param arg pointer to capabilities or configuration
*/
void (*configure_rru)(int idx, void *arg);
/*! \brief Pointer to generic RRU private information
*/
void *thirdparty_priv;
/*! \brief Callback for Third-party RRU Initialization routine
\param device the hardware configuration to use
*/
int (*thirdparty_init)(openair0_device *device);
/*! \brief Callback for Third-party RRU Cleanup routine
\param device the hardware configuration to use
*/
int (*thirdparty_cleanup)(openair0_device *device);
/*! \brief Callback for Third-party start streaming routine
\param device the hardware configuration to use
*/
int (*thirdparty_startstreaming)(openair0_device *device);
/*! \brief RRU Configuration callback
* \param idx RU index
* \param arg pointer to capabilities or configuration
*/
int (*trx_write_init)(openair0_device *device);
/* \brief Get internal parameter
* \param id parameter to get
* \return a pointer to the parameter
*/
void *(*get_internal_parameter)(char *id);
};
/* type of device init function, implemented in shared lib */
typedef int(*oai_device_initfunc_t)(openair0_device *device, openair0_config_t *openair0_cfg);
/* type of transport init function, implemented in shared lib */
typedef int(*oai_transport_initfunc_t)(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t *eth_params);
#define UE_MAGICDL 0xA5A5A5A5A5A5A5A5 // UE DL FDD record
#define UE_MAGICUL 0x5A5A5A5A5A5A5A5A // UE UL FDD record
#define ENB_MAGICDL 0xB5B5B5B5B5B5B5B5 // eNB DL FDD record
#define ENB_MAGICUL 0x5B5B5B5B5B5B5B5B // eNB UL FDD record
#define OPTION_LZ4 0x00000001 // LZ4 compression (option_value is set to compressed size)
typedef struct {
uint64_t magic; // Magic value (see defines above)
uint32_t size; // Number of samples per antenna to follow this header
uint32_t nbAnt; // Total number of antennas following this header
// Samples per antenna follow this header,
// i.e. nbAnt = 2 => this header+samples_antenna_0+samples_antenna_1
// data following this header in bytes is nbAnt*size*sizeof(sample_t)
uint64_t timestamp; // Timestamp value of first sample
uint32_t option_value; // Option value
uint32_t option_flag; // Option flag
} samplesBlockHeader_t;
#ifdef __cplusplus
extern "C"
{
#endif
#define DEVICE_SECTION "device"
#define CONFIG_HLP_DEVICE "Identifies the oai device (the interface to RF) to use, the shared lib \"lib_<name>.so\" will be loaded"
#define CONFIG_DEVICEOPT_NAME "name"
/* inclusion for device configuration */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* config parameters for oai device */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define DEVICE_PARAMS_DESC {\
{ CONFIG_DEVICEOPT_NAME, CONFIG_HLP_DEVICE, 0, strptr:&devname, defstrval:NULL, TYPE_STRING, 0}\
}
/*! \brief get device name from device type */
char *get_devname(int devtype);
/*! \brief Initialize openair RF target. It returns 0 if OK */
int openair0_device_load(openair0_device *device, openair0_config_t *openair0_cfg);
/*! \brief Initialize transport protocol . It returns 0 if OK */
int openair0_transport_load(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t *eth_params);
/*! \brief Get current timestamp of USRP
* \param device the hardware to use
*/
openair0_timestamp get_usrp_time(openair0_device *device);
/*! \brief Set RX frequencies
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
* \returns 0 in success
*/
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg);
/*! \brief read the iq record/player configuration */
extern int read_recplayconfig(recplay_conf_t **recplay_conf, recplay_state_t **recplay_state);
/*! \brief store recorded iqs from memory to file. */
extern void iqrecorder_end(openair0_device *device);
#include <unistd.h>
#ifndef gettid
#define gettid() syscall(__NR_gettid)
#endif
/*@}*/
#ifdef __cplusplus
}
#endif
#endif // COMMON_LIB_H