Commit 84d04b3c authored by Florian Kaltenberger's avatar Florian Kaltenberger

new interpretation of sdr_addrs string in RU config file: this is now directly...

new interpretation of sdr_addrs string in RU config file: this is now directly passed to the uhd to specify a device. It may contain a device type (i.e., "type=x300") or an IP address (i.e., "addr=192.168.10.2")
parent c4afc399
develop 1 128-ues 256_QAM_demod 2cw_fairRRscd 375-syrtem-sdr-platform 383-ulsch-scheduler-optimization 401-bug-related-to-nr-pucch-format-2-generator 408-reworked 408-ue-main-threads 445-LDPC-implementation-on-GPU 459-pusch-based-ta-updates 464-ru_beamforming_in_gpu 464-ru_beamforming_in_gpu-CPUsubfunction 472-add-pusch-dmrs-modes 481-ldpc-decoder-on-gpu 5g_fapi_scf LTE-sidelink LTE_TRX_on_single_port NCTU_CS_ISIP NCTU_CS_ISIP_CPU NCTU_CS_ISIP_GPU NCTU_OpinConnect_LDPC NR-PHY-MAC-IF-multi-UE NR_10MHz NR_CSI_reporting NR_DCI_01 NR_DL_sched_fixes NR_DL_scheduler NR_FAPI_beamindex_SSB_RO NR_FR2_RA NR_FR2_RRC_SSB NR_MAC_CE_GlobalEdge NR_MAC_Multi_Rach_GlobalEdge NR_MAC_SSB_RO_GlobalEdge NR_MAC_SSB_RO_UE_IDCC NR_MAC_SSB_RO_merge NR_MAC_TCI_UCI_GlobalEdge NR_NGAP NR_PDCP_noS1 NR_PUCCH_MultiUE NR_RA_updates NR_RRCConfiguragion_FR2 NR_RRCConfiguration NR_RRCConfiguration_FR2 NR_RRCConfiguration_S1U NR_RRCConfiguration_merge_develop NR_RRCConfiguration_sync_source NR_RRCConfiguration_trx_thread NR_RRC_CP_bugfix NR_RRC_PDCP NR_RRC_PRACH_procedures NR_RRC_PRACH_procedures_todevelop NR_RRC_PUSCH NR_RRC_TA NR_RRC_X2AP_AMBR_Change_Global_edge NR_RRC_X2AP_RemoveHardcodings_GlobalEdge NR_RRC_config_simplified NR_RRC_harq NR_RRC_harq_b NR_RRC_harq_hacks NR_RRC_harq_newdcipdu NR_SA_NGAP_RRC NR_SA_NGAP_RRC_wk42 NR_SA_itti_sim_wk48 NR_SCHED NR_SRB_Config NR_TRX_on_single_port NR_TRX_on_single_port2 NR_UE_MAC_scheduler NR_UE_RA_fixes NR_UE_UL_DCI_improvements NR_UE_enable_parallelization NR_UE_stability_fixes NR_UL_FAPI_programming NR_UL_scheduler NR_UL_scheduler_rebased NR_UL_scheduling NR_beamforming_test NR_gNB_SCF_Indication NR_ipaccess_testing NR_mac_uci_functions_rework NR_msg2_phytest NR_scheduling_CSIRS NR_scheduling_request NR_test_S1U_RRC_PRACH_procedures NR_ue_dlsch_dmrs_cdm New-Merge-sidelink-develop OpInConnect_ISIP PUSCH_TA_update RA_CI_test UE_DL_DCI_hotfix UpdateRANRemoteUEReport add_iris_hw addoptions_nr_USRPdevice bch-fixes-bitmap benetel_5g_prach_fix benetel_phase_rotation benetel_phase_rotation_old bugfix-find-uci bugfix-minor-remove-wrong-log bugfix-nr-bands bugfix-nr-ldpc-post-processing bugfix-nr-ldpc-size-typo bugfix-nr-pdcp-sn-size bugfix-nr-rate-matching-assertion cce_indexing_fix cce_indexing_fix2 ci-deploy-docker-compose ci-rd-july-improvements ci-ul-iperf-from-trf-container ci-yacine clean-5G-scope-round2 cleanup_softmodem_main constant_power debug_branch_init_sync develop-FeMBMS develop-ci develop-large-scale-emulations develop-m2ap develop-multi-RRUs develop-nb-iot-merge develop-nb-iot-merge-w-conflicts develop-nb-iot-ntust develop-nr develop-nr-fr2 develop-nr-fr2-rework develop-nr_cppcheck develop-oriecpriupdates develop-sib1 develop-vco3 develop_ci develop_inria_ci_deployment develop_inria_ci_deployment_gp develop_inria_ci_deployment_gp_b4merge develop_integration_2019_w44 develop_integration_2020_w15 develop_integration_2020_w19 develop_integration_w08 develop_jenkins_replay dfts_alternatives dlsch-all-dlslots dlsch_encode_mthread dlsch_parallel dlsim-autotests docupdate_tools dongzhanyi-zte-0001 dongzhanyi-zte-develop dongzhanyi-zte-develop2 dreibh/apt-auth-fix dreibh/device-load-fix dreibh/device-load-fix-develop-branch dreibh/doxygen-fix dual-connectivity dummy edrx extend_sharedlibusage extend_sharedlibusage2 fapi_for_dmrs_and_ptrs feat-mac-sock feature-368-channel-simulator feature-4g-sched feature-flexran-cm-s1ap feature-nr-4g-nfapi-modifications feature-support-clang-format feature/make-s1-mme-port-configurable feature/make-s1-mme-port-configurable-with-astyle-fixes feature_tm3 fembms-enb-ue finalize-oaicn-integration firas fix-ci-tun fix-clock-source fix-dirty-ue-same-machine fix-itti-segv fix-l2-sim fix-limeSDR-compile fix-softmodem-restart fix-warnings fix_do_ra_data fix_pdsch_low_prb fix_rfsim_mimo fix_rrc_x2_ticking fixes-mac-sched-nfapi fixes-mac-sched-tun fixes-tun flexran-apps flexran-improvements flexran-repair-mme-mgmt flexran-report-split fr2-hw-test fujitsu_lte_contribution fujitsu_lte_contribution-128 gNB-nrUE-USRP generate_push_ptrs harq-hotfix hotfix-minor-remove-nr-rlc-cppcheck-error hotfix-nr-rlc-tick hotfix-ocp-executable hotfix-ue-musim-compilation hotfix_usrp_lib improve_build_nr_lte_merge improve_nr_modulation improve_ue_stability initial-nfapi-PNF-fixes integration-develop-nr-2019w45 integration_2020_wk40 integration_2020_wk41 integration_2020_wk42_2 integration_2020_wk45 integration_2020_wk45_2 integration_2020_wk46 integration_2020_wk46_2 integration_2020_wk47 integration_2020_wk48 integration_2020_wk48_2 integration_2020_wk49 integration_2020_wk50 integration_2020_wk50_1 inter-RRU inter-RRU-final inter-RRU-nr inter-RRU-oairu inter-rru-UE interoperability-test isip_nr issue392-simplify-s1-nos1step2_01 issue416_nfapicleanup l2-fixes ldpc-dec-layering ldpc-decoder-codegen ldpc-decoder-codegen2 ldpc-decoder-improvements ldpc-offload ldpc_short_codeword_fixes load_gnb lte-m-ue_type lte_uplink_improvement mac-fixes-wk45_2 main_python master mbms-fix-develop-nr merging-2019-w51-to-develop-nr modify_fairRRscd_parallel mosaic5g-oai-ran mosaic5g-oai-sim mu_allocate multi-L1 multi-RRUs new_pdcp new_rlc new_rlc_2020 new_rlc_in_mbms nfapi-bugfix nfapi_improvement nfapi_nr_develop ngap-dlul ngap-support ngap-w48-merge2 ngap-wf ngap-wf-1120 ngap-wf-1120-srb ngap-wf-1120-srb-gtp ngap-wf-1120-srb-gtp-hs ngap-wf-1120-srb-gtp-hs1 ngap-wf-1120-srb-gtp-hs2 ngap-wf-1203-yunsdr ngap-wf-liuyu ngap_lfq_1120 ngap_merge noCore nr-coreset-bug-fix nr-dlsch-multi-thread nr-dlsch-thread nr-dual-connectivity nr-interdigital-test nr-ip-uplink-noS1 nr-mac-pdu-wireshark nr-mac-remove-ue-list nr-multiple-ssb nr-pdcp nr-pdsch-extraction-bugfix nr-physim-update nr-rlc-am-bugfix-w44 nr-rlc-bugfix-w44 nr-ssb-measurements nr-timing-measurement nr-timing-measurement-merge nr-ue-buffer-status nr-ue-slot-based nr-uldci nrUE nrUE-hs nrUE-upper-layer nr_beamforming nr_bsr nr_ci_dlsim nr_csi_newbranch nr_dci_procedures nr_demo_wsa2019 nr_dl_dmrs_type2 nr_dl_pf nr_dl_pf2 nr_dl_ul_ptrs nr_dlsch_parallel_measurements nr_dlsim_plot nr_fapi_for_push_tmp nr_fdd_if_fix nr_fix_easycppcheck nr_flexible_NRBDL nr_improve_build_procedures nr_increase_tp nr_mib_vsa_test nr_pdcch_testing nr_pdcch_updates nr_pdsch_integration nr_polar_decoder_improvement nr_prach nr_prach_fr2 nr_pucch nr_pucch2 nr_segmentation_fixes nr_sim_fix nr_tdd_configuration nr_ue_msg3 nr_ue_tti_cleanup nr_vcd nrue-multi-thread nrue_msg2_reception nsa-ue nsa_remove_band_hardcodings oai-sim oai-ubuntu-docker oai-ubuntu-docker-for-lmssdr oairu oc-docker-october-improvements ocp_simulator openxg/develop pdcp-benchmark pdsch-ch-est polar8 ptrs_rrc_config pusch-mthread-scaling-fix ra-dl-ul rau_rru_reciprocity_measurements reduce_memory_footprint release_v1_2_0_candidate remove-ci-workaround remove_nos1_hack_pdcp remove_x2_gnb_hardcoding repair-TA revert-f5c94279 revert_memcpy rh_ci_fix_autoterminate rh_ci_fr1_update rh_ci_oc rh_ci_py rh_ci_rfsim_ra rh_doc_update_3 rh_fr1_newjenkins rh_fr1_update rh_gnb_compile_fix rh_wk50_debug rhel77-build rlc-v2-bugfix-status-reporting rlc-v2-tick rlc_v2_coverity_fixes rrc-enb-phy-testmode ru-parallel-beamforming ru_rau_enhancement-external-timing runel runel-reverse-test s1_subnormal s1ap-bugfix-rab_setup signal-delay small-bugfixes-w40 smallcleanup softmodem_cleanup split73 test-x310-perf testing_2symb_pdcch testing_with_external_txdata thread-pool tools_5Gadapt tp-ota-test trx_thread_param trx_write_thread ue-csi ue-fixes-ota ue-updates-runel-test ue_adjust_gain ue_dlsch-multi-threading ue_dlsch_decoding_ldpc_offload ue_nfapi_mch uhd_priority_set_cleanup ul_dl_dci_same_slot ul_harq ulsch_decode_mthread ulsim_changes update-to-2019-march-june-release usrp_fix_adc_shift_and_pps_sync usrp_gpio_test x2-endc-processing x2_neighbor_6cells x2_tdd yihongzheng_srb zzs
No related merge requests found
......@@ -146,7 +146,7 @@ typedef enum {
{CONFIG_STRING_RU_ATT_TX, NULL, 0, uptr:NULL, defintval:0, TYPE_UINT, 0}, \
{CONFIG_STRING_RU_ATT_RX, NULL, 0, uptr:NULL, defintval:0, TYPE_UINT, 0}, \
{CONFIG_STRING_RU_NBIOTRRC_LIST, NULL, 0, uptr:NULL, defintarrayval:DEFENBS, TYPE_INTARRAY, 1}, \
{CONFIG_STRING_RU_SDR_ADDRS, NULL, 0, strptr:NULL, defstrval:"0.0.0.0", TYPE_STRING, 0}, \
{CONFIG_STRING_RU_SDR_ADDRS, NULL, 0, strptr:NULL, defstrval:"type=b200", TYPE_STRING, 0}, \
{CONFIG_STRING_RU_SDR_CLK_SRC, NULL, 0, strptr:NULL, defstrval:"internal", TYPE_STRING, 0}, \
}
......
......@@ -1046,30 +1046,6 @@ extern "C" {
// Initialize USRP device
device->openair0_cfg = openair0_cfg;
std::string args = "type=b200";
char *addr_args = NULL;
// Check whether sdr_addrs is set in the config or not
if (openair0_cfg[0].sdr_addrs != NULL) {
if (strcmp(openair0_cfg[0].sdr_addrs, "0.0.0.0") != 0) {
// Check whether sdr_addrs contains multiple IP addresses
// and split and add them to addr_args
if (strstr(openair0_cfg[0].sdr_addrs, ",") != NULL) {
char *addr0 = openair0_cfg[0].sdr_addrs;
// Replace , with \0
strsep(&openair0_cfg[0].sdr_addrs, ",");
char *addr1 = openair0_cfg[0].sdr_addrs;
// Allocate memory for ",addr0=,addr1=\0" and the addresses
size_t addr_args_len = sizeof(char)*(15 + strlen(addr0) + strlen(addr1));
addr_args = (char *)malloc(addr_args_len);
snprintf(addr_args, addr_args_len, ",addr0=%s,addr1=%s", addr0, addr1);
args += addr_args;
LOG_D(PHY, "addr_args == '%s'\n", addr_args);
}
}
}
uhd::device_addrs_t device_adds = uhd::device::find(args);
int vers=0,subvers=0,subsubvers=0;
int bw_gain_adjust=0;
#if defined(USRP_REC_PLAY)
......@@ -1083,44 +1059,59 @@ extern "C" {
LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
uhd::get_version_string().c_str(),vers,subvers,subsubvers);
if(device_adds.size() == 0) {
double usrp_master_clock = 184.32e6;
std::string args = "type=x300";
std::string args;
if (openair0_cfg[0].sdr_addrs == NULL) {
args = "type=b200";
} else {
args = openair0_cfg[0].sdr_addrs;
}
if (addr_args) {
args += addr_args;
}
uhd::device_addrs_t device_adds = uhd::device::find(args);
// workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
if (device_adds.size() == 0) {
std::cerr<<"No USRP Device Found. " << std::endl;
free(s);
return -1;
} else if (device_adds.size() > 1) {
std::cerr<<"More than one USRP Device Found. Please specify device more precisely in config file." << std::endl;
free(s);
return -1;
}
std::cerr << "Found USRP " << device_adds[0].get("type") << "\n";
double usrp_master_clock;
if (device_adds[0].get("type") == "b200") {
printf("Found USRP b200\n");
device->type = USRP_B200_DEV;
usrp_master_clock = 30.72e6;
args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
// args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
uhd::device_addrs_t device_adds = uhd::device::find(args);
args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
}
if(device_adds.size() == 0) {
args += ",addr=192.168.30.2";
uhd::device_addrs_t device_adds = uhd::device::find(args);
if (device_adds[0].get("type") == "n3xx") {
printf("Found USRP n300\n");
device->type=USRP_X300_DEV; //treat it as X300 for now
usrp_master_clock = 122.88e6;
args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
}
if(device_adds.size() == 0) {
std::cerr<<"No USRP Device Found. " << std::endl;
free(s);
return -1;
}
}
if (device_adds[0].get("type") == "x300") {
printf("Found USRP x300\n");
device->type=USRP_X300_DEV;
usrp_master_clock = 184.32e6;
args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
}
LOG_I(PHY,"Found USRP X300\n");
s->usrp = uhd::usrp::multi_usrp::make(args);
s->usrp = uhd::usrp::multi_usrp::make(args);
// lock mboard clocks
if (openair0_cfg[0].clock_source == internal)
s->usrp->set_clock_source("internal");
else
s->usrp->set_clock_source("external");
// lock mboard clocks
if (openair0_cfg[0].clock_source == internal)
s->usrp->set_clock_source("internal");
else
s->usrp->set_clock_source("external");
//Setting device type to USRP X300/X310
device->type=USRP_X300_DEV;
// this is not working yet, master clock has to be set via constructor
// set master clock rate and sample rate for tx & rx for streaming
//s->usrp->set_master_clock_rate(usrp_master_clock);
if (device->type==USRP_X300_DEV) {
openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
#if defined(USRP_REC_PLAY)
std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
......@@ -1178,29 +1169,9 @@ extern "C" {
exit(-1);
break;
}
} else {
LOG_I(PHY,"Found USRP B200\n");
args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
s->usrp = uhd::usrp::multi_usrp::make(args);
// s->usrp->set_rx_subdev_spec(rx_subdev);
// s->usrp->set_tx_subdev_spec(tx_subdev);
// do not explicitly set the clock to "internal", because this will disable the gpsdo
// // lock mboard clocks
// s->usrp->set_clock_source("internal");
// set master clock rate and sample rate for tx & rx for streaming
// lock mboard clocks
if (openair0_cfg[0].clock_source == internal) {
s->usrp->set_clock_source("internal");
} else {
s->usrp->set_clock_source("external");
s->usrp->set_time_source("external");
}
device->type = USRP_B200_DEV;
}
if (device->type == USRP_B200_DEV) {
if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
bw_gain_adjust=0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment