Fixed eNB threading issues creating problems for nfapi emulator.

nfapi/open-nFAPI/pnf/src/pnf.c

@@ -1260,7 +1260,7 @@ int pnf_connect(pnf_t* pnf)
 			address = inet_ntoa(addr->sin_addr);
 		}
 
-		NFAPI_TRACE(NFAPI_TRACE_NOTE, "Host address info  %d Family:%s Address:%s\n", i++, family, address);
+		//NFAPI_TRACE(NFAPI_TRACE_NOTE, "Host address info  %d Family:%s Address:%s\n", i++, family, address);
 
 		if (pnf->sctp)
 		{

nfapi/open-nFAPI/pnf/src/pnf_p7.c

@@ -379,7 +379,7 @@ static uint32_t get_sf_time(uint32_t now_hr, uint32_t sf_start_hr)
 {
 	if(now_hr < sf_start_hr)
 	{
-		NFAPI_TRACE(NFAPI_TRACE_INFO, "now is earlier than start of subframe now_hr:%u sf_start_hr:%u\n", now_hr, sf_start_hr);
+		//NFAPI_TRACE(NFAPI_TRACE_INFO, "now is earlier than start of subframe now_hr:%u sf_start_hr:%u\n", now_hr, sf_start_hr);
 		return 0;
 	}
 	else

nfapi/open-nFAPI/vnf/src/vnf_p7.c

@@ -1203,12 +1203,12 @@ void vnf_handle_ul_node_sync(void *pRecvMsg, int recvMsgLen, vnf_p7_t* vnf_p7)
 
 			if(phy->in_sync == 0)
 			{
-				NFAPI_TRACE(NFAPI_TRACE_NOTE, "***** Adjusting VNF phy_id:%d SFN/SF (%s) from %d to %d (%d) mode:%s zeroCount:%u sync:%s\n", 
+				/*NFAPI_TRACE(NFAPI_TRACE_NOTE, "***** Adjusting VNF phy_id:%d SFN/SF (%s) from %d to %d (%d) mode:%s zeroCount:%u sync:%s\n",
 					ind.header.phy_id, (phy->in_sync ? "via sfn" : "now"),
 					NFAPI_SFNSF2DEC(curr_sfn_sf), NFAPI_SFNSF2DEC(new_sfn_sf), phy->adjustment, 
 					phy->filtered_adjust ? "FILTERED" : "ABSOLUTE",
 					phy->zero_count,
-					phy->in_sync ? "IN_SYNC" : "OUT_OF_SYNC");
+					phy->in_sync ? "IN_SYNC" : "OUT_OF_SYNC");*/
 
 				phy->sfn_sf = new_sfn_sf;
 			}

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi.conf

@@ -172,7 +172,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,14 +181,24 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.5/24";
+        #ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
+        #ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
+        #ENB_INTERFACE_NAME_FOR_S1U               = "lo";
+        #ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.5/24";
+        #ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        #ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
+        #ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+        
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "enp0s31f6";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.188/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "enp0s31f6";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.188/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
+        
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.188/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+        
     };
   }
 );
@@ -196,7 +206,7 @@ eNBs =
 MACRLCs = (
 	{
 	num_cc = 1;
-      	local_s_if_name  = "lo";			  
+      	local_s_if_name  = "lo:";			  
       	remote_s_address = "127.0.0.1";
     	local_s_address  = "127.0.0.2"; 
     	local_s_portc    = 50001;	

targets/RT/USER/lte-enb.c

@@ -948,8 +948,8 @@ void init_eNB_proc(int inst) {
       // Original Code from Fujitsu w/ old structure/field name
       //pthread_create( &proc_rxtx[0].pthread_rxtx, attr0, eNB_thread_rxtx, &proc_rxtx[0] );
       //pthread_create( &proc_rxtx[1].pthread_rxtx, attr1, eNB_thread_rxtx, &proc_rxtx[1] );
-      pthread_create( &L1_proc->pthread, attr0, L1_thread, proc );
-      pthread_create( &L1_proc_tx->pthread, attr1, L1_thread, proc);
+      pthread_create( &L1_proc->pthread, attr0, L1_thread, L1_proc );
+      pthread_create( &L1_proc_tx->pthread, attr1, L1_thread, L1_proc_tx);
     }
 
     pthread_create( &proc->pthread_prach, attr_prach, eNB_thread_prach, eNB );