An error occurred fetching the project authors.
- 13 Mar, 2019 1 commit
-
-
Cedric Roux authored
This commit introduces X2AP timers (t_reloc_prep, tx2_reloc_overall). You need to set the values in the configuration file. X2AP can be enabled or disabled in the configuration file too (disabled by default). Some deadcode was removed.
-
- 05 Nov, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 26 Oct, 2018 2 commits
-
-
Wang Tsu-Han authored
-
Wang Tsu-Han authored
-
- 28 Sep, 2018 1 commit
-
-
Robert Schmidt authored
-
- 12 Sep, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 23 Aug, 2018 1 commit
-
-
Konstantinos Alexandris authored
The configuration file has now to contain ENB_IPV4_ADDRESS_FOR_X2C and ENB_PORT_FOR_X2C in the NETWORK_INTERFACES section. For example: NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24"; ENB_PORT_FOR_X2C = 36422; # Spec 36422 };
-
- 30 Jul, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 15 Jun, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 14 Jun, 2018 1 commit
-
-
Cedric Roux authored
Since now pucch_n1_AN is taken from the configuration file, it has to be set to 0. Value 32 will not work well, at least in FDD. This has to be handled properly at some point (do not use uplink resource blocks used by PUCCH for PUSCH).
-
- 12 Jun, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 14 May, 2018 2 commits
-
-
Wang Tsu-Han authored
-
Rajeev Gangula authored
-
- 26 Jan, 2018 1 commit
-
-
Wang Tsu-Han authored
-
- 19 Jan, 2018 1 commit
-
-
Massive authored
-
- 15 Jan, 2018 2 commits
-
-
Cedric Roux authored
This commit fixes issues introduced by the previous commit. Summary of work: - cleanup: - fix LOG_XX to be less verbose - fix cmake_targets/CMakeLists.txt - fix oaienv - remove dead code - bug fixes: - in openair1/SCHED/fapi_l1.c we had: eNB->pdcch_vars[subframe&1].num_dci = number_dci; should be: eNB->pdcch_vars[subframe&1].num_dci = 0; This bug let the PHY send more DCIs than what should have been sent because num_dci is incremented later on in the code. This fix may be a problem for fapi mode, to be checked. - add new T VCD traces - revert openair1/PHY/TOOLS/file_output.c to 'develop' version - remove thread_id in logRecord/logRecord_mt - revert (and adapt) configuration files - be careful when doing frame++, we need to % 1024 - revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c - NFAPI: - the open-nFAPI code has been included in the repository. See nfapi/README. Maybe we should "git clone" the Cisco repository instead. We have to be careful of availability though. What has been tested: - monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink Anything else may fail to work, especially the FAPI mode, which has not been tested at all.
-
Cedric Roux authored
It has been chosen to not include the full history of commits from David. He included a binary version of wireshark, probably a modified one that understands NFAPI. Wireshark is released under the GPL license, we cannot include it in the repository. We could have done a next commit to remove this binary. But then it would still be present in the history of commits, which may not be allowed. And it would take space on disk. We could edit the history to remove wireshark entirely. But this operation is too complicated. There was also a pcap capture file, which has nothing to do in the history of commits and would take space on disk. There again, it's too difficult to edit the history to remove it. There was a file .gitignore that was also removed. The original history can be found on David's repository: https://gitlab.eurecom.fr/daveprice/openairinterface5g/ The branch is: nfapi-ru-rau-split. A copy of that branch has been included in the internal OAI repository, for those who have access to it. The branch is the same. The last commit ID is 9106438239e0bc626ff1fa1d97d911caadd0fbb9. You can compare the current commit with the commit 9106... to see what differs. The current commit has to be considered non-working. The commit following the current commit will fix problems with the work in the current commit. If you use git bisect, don't spend time analyzing the current commit.
-
- 27 Oct, 2017 1 commit
-
-
Wang Tsu-Han authored
-
- 18 Oct, 2017 1 commit
-
-
Cedric Roux authored
see commit 622b919b
-
- 08 Oct, 2017 1 commit
-
-
Raymond Knopp authored
put 50 PRB back in default enb configuration. added handling of UE release in L1/L2. detection of stale ULSCH configuration
-
- 07 Oct, 2017 1 commit
-
-
Raymond Knopp authored
removal of LOG_I put for debugging.
-
- 20 Sep, 2017 1 commit
-
-
Raymond Knopp authored
-
- 14 Aug, 2017 1 commit
-
-
khalidhamdy authored
-
- 25 Jul, 2017 1 commit
-
-
Raymond Knopp authored
-
- 07 Jan, 2017 1 commit
-
-
Raymond.Knopp authored
fixes for precoding (turning off if nb_antennas_tx=1), configuration files, timing advance with 3/4 sampling on 20 MHz, logging in MAC
-
- 26 Sep, 2016 1 commit
-
-
Rohit Gupta authored
-
- 23 Sep, 2016 1 commit
-
-
Raymond Knopp authored
-
- 20 Sep, 2016 1 commit
-
-
Raymond Knopp authored
-
- 06 Aug, 2016 2 commits
-
-
Raymond Knopp authored
-
Raymond Knopp authored
-
- 27 Jul, 2016 1 commit
-
-
Raymond Knopp authored
-
- 26 Jul, 2016 1 commit
-
-
Raymond Knopp authored
-
- 24 Jul, 2016 1 commit
-
-
Raymond Knopp authored
Result of testing as eNodeB. modifications for .vcd logging, bugfix in eNB_thread_FH (subframe counter), update of .conf file for new threading parameters. Updates to gtkwave configuration file for new threading.
-
- 11 May, 2016 1 commit
-
-
Raymond Knopp authored
-
- 10 May, 2016 1 commit
-
-
Raymond Knopp authored
-
- 12 Apr, 2016 1 commit
-
-
gauthier authored
-
- 02 Apr, 2016 1 commit
-
-
Raymond Knopp authored
-
- 25 Mar, 2016 1 commit
-
-
gauthier authored
-
- 18 Mar, 2016 1 commit
-
-
Raymond Knopp authored
added Timing advance tracing to .vcd output. Increase maximum UL RB count to 45. Measured UL throughput @ 15 Mbit/s (40 PRBs).
-
- 15 Mar, 2016 1 commit
-
-
gauthier authored
-