usrp_lib.cpp 48.6 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

Raymond Knopp's avatar
 
Raymond Knopp committed
22 23
/** usrp_lib.cpp
 *
24
 * \author: HongliangXU : hong-liang-xu@agilent.com
Raymond Knopp's avatar
 
Raymond Knopp committed
25 26 27 28 29 30 31 32
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
33
#include <uhd/version.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
34 35
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
36 37
#include <boost/thread.hpp>
#include <boost/format.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
38 39 40 41
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
42
#include <time.h>
43
#include "UTIL/LOG/log_extern.h"
Raymond Knopp's avatar
 
Raymond Knopp committed
44
#include "common_lib.h"
laurent's avatar
laurent committed
45 46
#include "assertions.h"

47 48 49
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
laurent's avatar
laurent committed
50

51 52 53
#ifdef __AVX2__
#  include <immintrin.h>
#endif
54

55 56 57 58
#ifdef __arm__
#  include <arm_neon.h>
#endif

59 60 61 62
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

laurent's avatar
laurent committed
63 64
/*! \brief USRP Configuration */
typedef struct {
Raymond Knopp's avatar
 
Raymond Knopp committed
65

laurent's avatar
laurent committed
66 67 68 69 70
    // --------------------------------
    // variables for USRP configuration
    // --------------------------------
    //! USRP device pointer
    uhd::usrp::multi_usrp::sptr usrp;
laurent's avatar
laurent committed
71 72 73 74 75 76 77 78 79 80 81

    //create a send streamer and a receive streamer
    //! USRP TX Stream
    uhd::tx_streamer::sptr tx_stream;
    //! USRP RX Stream
    uhd::rx_streamer::sptr rx_stream;

    //! USRP TX Metadata
    uhd::tx_metadata_t tx_md;
    //! USRP RX Metadata
    uhd::rx_metadata_t rx_md;
Raymond Knopp's avatar
 
Raymond Knopp committed
82

laurent's avatar
laurent committed
83 84
    //! Sampling rate
    double sample_rate;
Raymond Knopp's avatar
 
Raymond Knopp committed
85

laurent's avatar
laurent committed
86 87
    //! TX forward samples. We use usrp_time_offset to get this value
    int tx_forward_nsamps; //166 for 20Mhz
88

laurent's avatar
laurent committed
89 90 91 92 93 94 95 96
    // --------------------------------
    // Debug and output control
    // --------------------------------
    int num_underflows;
    int num_overflows;
    int num_seq_errors;
    int64_t tx_count;
    int64_t rx_count;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
97 98
    int wait_for_first_pps;
    int use_gps;
laurent's avatar
laurent committed
99 100
    //! timestamp of RX packet
    openair0_timestamp rx_timestamp;
Raymond Knopp's avatar
 
Raymond Knopp committed
101

laurent's avatar
laurent committed
102
} usrp_state_t;
Raymond Knopp's avatar
 
Raymond Knopp committed
103

Florian Kaltenberger's avatar
Florian Kaltenberger committed
104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199
//void print_notes(void)
//{
    // Helpful notes
  //  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
  //  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
  //  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
  //  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
  //  std::cout << boost::format("****************************************************************************************************************\n");
//}

static int sync_to_gps(openair0_device *device)
{
    uhd::set_thread_priority_safe();

    //std::string args;

    //Set up program options
    //po::options_description desc("Allowed options");
    //desc.add_options()
    //("help", "help message")
    //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
    //;
    //po::variables_map vm;
    //po::store(po::parse_command_line(argc, argv, desc), vm);
    //po::notify(vm);

    //Print the help message
    //if (vm.count("help"))
    //{
      //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
      // return EXIT_FAILURE;
    //}

    //Create a USRP device
    //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
    //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
    //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
 
    usrp_state_t *s = (usrp_state_t*)device->priv;    

    try
    {
        size_t num_mboards = s->usrp->get_num_mboards();
        size_t num_gps_locked = 0;
        for (size_t mboard = 0; mboard < num_mboards; mboard++)
        {
            std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;

            //Set references to GPSDO
            s->usrp->set_clock_source("gpsdo", mboard);
            s->usrp->set_time_source("gpsdo", mboard);

            //std::cout << std::endl;
            //print_notes();
            //std::cout << std::endl;

            //Check for 10 MHz lock
            std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);
            if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())
            {
                std::cout << "Waiting for reference lock..." << std::flush;
                bool ref_locked = false;
                for (int i = 0; i < 30 and not ref_locked; i++)
                {
                    ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();
                    if (not ref_locked)
                    {
                        std::cout << "." << std::flush;
                        boost::this_thread::sleep(boost::posix_time::seconds(1));
                    }
                }
                if(ref_locked)
                {
                    std::cout << "LOCKED" << std::endl;
                } else {
                    std::cout << "FAILED" << std::endl;
                    std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
                    exit(EXIT_FAILURE);
                }
            }
            else
            {
                std::cout << boost::format("ref_locked sensor not present on this board.\n");
            }

            //Wait for GPS lock
            bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
            if(gps_locked)
            {
                num_gps_locked++;
                std::cout << boost::format("GPS Locked\n");
            }
            else
            {
                std::cerr << "WARNING:  GPS not locked - time will not be accurate until locked" << std::endl;
            }
Raymond Knopp's avatar
 
Raymond Knopp committed
200

Florian Kaltenberger's avatar
Florian Kaltenberger committed
201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268
            //Set to GPS time
            uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
            s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));

            //Wait for it to apply
            //The wait is 2 seconds because N-Series has a known issue where
            //the time at the last PPS does not properly update at the PPS edge
            //when the time is actually set.
            boost::this_thread::sleep(boost::posix_time::seconds(2));

            //Check times
            gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
            std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
            std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
            //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
            //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
            //else
            //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
        }

        if (num_gps_locked == num_mboards and num_mboards > 1)
        {
            //Check to see if all USRP times are aligned
            //First, wait for PPS.
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();
            while (time_last_pps == s->usrp->get_time_last_pps())
            {
                boost::this_thread::sleep(boost::posix_time::milliseconds(1));
            }

            //Sleep a little to make sure all devices have seen a PPS edge
            boost::this_thread::sleep(boost::posix_time::milliseconds(200));

            //Compare times across all mboards
            bool all_matched = true;
            uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);
            for (size_t mboard = 1; mboard < num_mboards; mboard++)
            {
                uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);
                if (mboard_time != mboard0_time)
                {
                    all_matched = false;
                    std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                                  % mboard0_time.get_real_secs()
                                  % mboard
                                  % mboard_time.get_real_secs()) << std::endl;
                }
            }
            if (all_matched)
            {
                std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
            } else {
                std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
            }
        }
    }
    catch (std::exception& e)
    {
        std::cout << boost::format("\nError: %s") % e.what();
        std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
        std::cout << boost::format("Visit one of these pages if the problem persists:\n");
        std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
        std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
        std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
        exit(EXIT_FAILURE);
    }
Raymond Knopp's avatar
 
Raymond Knopp committed
269

Florian Kaltenberger's avatar
Florian Kaltenberger committed
270 271
    return EXIT_SUCCESS;
}
Raymond Knopp's avatar
 
Raymond Knopp committed
272

273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310
#if defined(USRP_REC_PLAY)
#include "usrp_lib.h"
static FILE    *pFile = NULL;
int             mmapfd = 0;
struct stat     sb;
iqrec_t        *ms_sample = NULL;                      // memory for all subframes
unsigned int    nb_samples = 0;
unsigned int    cur_samples = 0;
int64_t         wrap_count = 0;
int64_t         wrap_ts = 0;
unsigned int    u_sf_mode = 0;                         // 1=record, 2=replay
unsigned int    u_sf_record = 0;                       // record mode
unsigned int    u_sf_replay = 0;                       // replay mode
char            u_sf_filename[1024];                   // subframes file path
unsigned int    u_sf_max = DEF_NB_SF;                  // max number of recorded subframes
unsigned int    u_sf_loops = DEF_SF_NB_LOOP;           // number of loops in replay mode
unsigned int    u_sf_read_delay = DEF_SF_DELAY_READ;   // read delay in replay mode
unsigned int    u_sf_write_delay = DEF_SF_DELAY_WRITE; // write delay in replay mode
char           *tmp_filename[1];                       // use an array of pointer (libconfig does not seems to work with char array yet)

char config_opt_sf_file[] = CONFIG_OPT_SF_FILE;
char config_def_sf_file[] = DEF_SF_FILE;
char config_hlp_sf_file[] = CONFIG_HLP_SF_FILE;
char config_opt_sf_rec[] = CONFIG_OPT_SF_REC;
char config_hlp_sf_rec[] = CONFIG_HLP_SF_REC;
char config_opt_sf_rep[] = CONFIG_OPT_SF_REP;
char config_hlp_sf_rep[] = CONFIG_HLP_SF_REP;
char config_opt_sf_max[] = CONFIG_OPT_SF_MAX;
char config_hlp_sf_max[] = CONFIG_HLP_SF_MAX;
char config_opt_sf_loops[] = CONFIG_OPT_SF_LOOPS;
char config_hlp_sf_loops[] = CONFIG_HLP_SF_LOOPS;
char config_opt_sf_rdelay[] = CONFIG_OPT_SF_RDELAY;
char config_hlp_sf_rdelay[] = CONFIG_HLP_SF_RDELAY;
char config_opt_sf_wdelay[] = CONFIG_OPT_SF_WDELAY;
char config_hlp_sf_wdelay[] = CONFIG_HLP_SF_WDELAY;

#endif

311 312 313
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
laurent's avatar
laurent committed
314
static int trx_usrp_start(openair0_device *device) {
Raymond Knopp's avatar
 
Raymond Knopp committed
315

316 317 318 319
#if defined(USRP_REC_PLAY)
    if (u_sf_mode != 2) { // not replay mode
#endif      

laurent's avatar
laurent committed
320
    usrp_state_t *s = (usrp_state_t*)device->priv;
Raymond Knopp's avatar
 
Raymond Knopp committed
321

322 323 324 325 326 327 328 329 330 331 332

  // setup GPIO for TDD, GPIO(4) = ATR_RX
  //set data direction register (DDR) to output
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
  
  //set control register to ATR
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
  
  //set ATR register
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);

laurent's avatar
laurent committed
333 334
    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
335 336
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
337 338 339 340 341 342 343 344 345 346

    if (s->use_gps == 1) {
      s->wait_for_first_pps = 1;
      cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);    
    }
    else {
      s->wait_for_first_pps = 0; 
      cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    }

laurent's avatar
laurent committed
347
    cmd.stream_now = false; // start at constant delay
laurent's avatar
laurent committed
348
    s->rx_stream->issue_stream_cmd(cmd);
Raymond Knopp's avatar
 
Raymond Knopp committed
349

laurent's avatar
laurent committed
350 351 352 353
    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
Raymond Knopp's avatar
 
Raymond Knopp committed
354

laurent's avatar
laurent committed
355 356 357
    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
358 359 360
#if defined(USRP_REC_PLAY)
    }
#endif      
laurent's avatar
laurent committed
361
    return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
362
}
laurent's avatar
laurent committed
363
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
364 365
 * \param device the hardware to use
 */
laurent's avatar
laurent committed
366
static void trx_usrp_end(openair0_device *device) {
367 368 369 370 371 372
#if defined(USRP_REC_PLAY) // For some ugly reason, this can be called several times...
  static int done = 0;
  if (done == 1) return;
  done = 1;
  if (u_sf_mode != 2) { // not subframes replay
#endif  
laurent's avatar
laurent committed
373
    usrp_state_t *s = (usrp_state_t*)device->priv;
Raymond Knopp's avatar
 
Raymond Knopp committed
374

laurent's avatar
laurent committed
375 376 377 378 379
    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;
380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418
#if defined(USRP_REC_PLAY)
    }
#endif
#if defined(USRP_REC_PLAY)
    if (u_sf_mode == 1) { // subframes store
      pFile = fopen (u_sf_filename,"wb+");
      if (pFile == NULL) {
	std::cerr << "Cannot open " << u_sf_filename << std::endl;
      } else {
	unsigned int i = 0;
	unsigned int modu = 0;
	if ((modu = nb_samples % 10) != 0) {
	  nb_samples -= modu; // store entire number of frames
	}
	std::cerr << "Writing " << nb_samples << " subframes to " << u_sf_filename << " ..." << std::endl;
	for (i = 0; i < nb_samples; i++) {
	  fwrite(ms_sample+i, sizeof(unsigned char), sizeof(iqrec_t), pFile);
	}
	fclose (pFile);
	std::cerr << "File " << u_sf_filename << " closed." << std::endl;
      }
    }
    if (u_sf_mode == 1) { // record
      if (ms_sample != NULL) {
	free((void*)ms_sample);
	ms_sample = NULL;
      }
    }
    if (u_sf_mode == 2) { // replay
      if (ms_sample != MAP_FAILED) {
	munmap(ms_sample, sb.st_size);
	ms_sample = NULL;
      }
      if (mmapfd != 0) {
	close(mmapfd);
	mmapfd = 0;
      }
    }
#endif    
Raymond Knopp's avatar
 
Raymond Knopp committed
419
}
420

421 422
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
laurent's avatar
laurent committed
423
      @param timestamp The timestamp at whicch the first sample MUST be sent
424 425 426 427
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
laurent's avatar
laurent committed
428 429
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
430
  int ret=0;
431 432 433
#if defined(USRP_REC_PLAY)
  if (u_sf_mode != 2) { // not replay mode
#endif    
434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
  nsamps2 = (nsamps+7)>>3;
  __m256i buff_tx[2][nsamps2];
#else
  nsamps2 = (nsamps+3)>>2;
  __m128i buff_tx[2][nsamps2];
#endif
#elif defined(__arm__)
  nsamps2 = (nsamps+3)>>2;
  int16x8_t buff_tx[2][nsamps2];
#endif
  
  // bring RX data into 12 LSBs for softmodem RX
  for (int i=0; i<cc; i++) {
    for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
      buff_tx[i][j] = _mm256_slli_epi16(((__m256i*)buff[i])[j],4);
#else
Cedric Roux's avatar
Cedric Roux committed
457
      buff_tx[i][j] = _mm_slli_epi16(((__m128i*)buff[i])[j],4);
458 459
#endif
#elif defined(__arm__)
Cedric Roux's avatar
Cedric Roux committed
460
      buff_tx[i][j] = vshlq_n_s16(((int16x8_t*)buff[i])[j],4);
461
#endif
laurent's avatar
laurent committed
462
    }
463
  }
laurent's avatar
laurent committed
464

465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  s->tx_md.has_time_spec = flags;
  
  
  if(flags>0)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
  
  if (flags == 2) { // start of burst
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
  } else if (flags == 3) { // end of burst
    s->tx_md.start_of_burst = false;
    s->tx_md.end_of_burst = true;
  } else if (flags == 4) { // start and end
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = true;
  } else if (flags==1) { // middle of burst
    s->tx_md.start_of_burst = false;
    s->tx_md.end_of_burst = false;
  }
  
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0; i<cc; i++)
      buff_ptrs.push_back(buff_tx[i]);
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
  } else
    ret = (int)s->tx_stream->send(buff_tx[0], nsamps, s->tx_md,1e-3);
  
  
  
  if (ret != nsamps)
    LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);
500 501 502 503 504 505 506 507 508
#if defined(USRP_REC_PLAY)
  } else {
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_write_delay * 1000;
    nanosleep(&req, NULL);
    ret = nsamps;
  }
#endif    
509 510

  return ret;
Raymond Knopp's avatar
 
Raymond Knopp committed
511 512
}

513 514 515 516 517 518 519 520 521 522 523
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
laurent's avatar
laurent committed
524
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
525 526 527 528 529 530
  usrp_state_t *s = (usrp_state_t*)device->priv;
  int samples_received=0,i,j;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(USRP_REC_PLAY)
  if (u_sf_mode != 2) { // not replay mode
#endif    
531 532
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
533 534
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
535
#else
laurent's avatar
laurent committed
536 537
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
538 539
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
540 541
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
542 543
#endif

laurent's avatar
laurent committed
544 545 546 547 548 549 550 551 552 553 554 555
    if (device->type == USRP_B200_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;
            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received=0;
            while (samples_received != nsamps) {
                samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                       nsamps-samples_received, s->rx_md);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
556
                if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
laurent's avatar
laurent committed
557
                    break;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
558
	        if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) { printf("sleep...\n");} //usleep(100); 
laurent's avatar
laurent committed
559
            }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
560
	    if (samples_received == nsamps) s->wait_for_first_pps=0;
laurent's avatar
laurent committed
561 562 563 564
        }
        // bring RX data into 12 LSBs for softmodem RX
        for (int i=0; i<cc; i++) {
            for (int j=0; j<nsamps2; j++) {
565 566
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
567
                ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
568
#else
laurent's avatar
laurent committed
569
                ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
570 571
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
572
                ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
573
#endif
laurent's avatar
laurent committed
574 575 576 577 578 579 580 581 582 583 584 585 586
            }
        }
    } else if (device->type == USRP_X300_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;

            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
        }
587
    }
laurent's avatar
laurent committed
588 589
    if (samples_received < nsamps)
        LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);
590

laurent's avatar
laurent committed
591
    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
Cedric Roux's avatar
Cedric Roux committed
592
        LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());
593

laurent's avatar
laurent committed
594 595 596
    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635
#if defined (USRP_REC_PLAY)
  }
#endif    
#if defined(USRP_REC_PLAY)
  if (u_sf_mode == 1) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (nb_samples < u_sf_max) {
      (ms_sample+nb_samples)->header = BELL_LABS_IQ_HEADER; 
      (ms_sample+nb_samples)->ts = *ptimestamp;
      memcpy((ms_sample+nb_samples)->samples, buff[0], nsamps*4);
      nb_samples++;
    }
  } else if (u_sf_mode == 2) { // replay mode
    if (cur_samples == nb_samples) {
      cur_samples = 0;
      wrap_count++;
      if (wrap_count == u_sf_loops) {
	std::cerr << "USRP device terminating subframes replay mode after " << u_sf_loops << " loops." << std::endl;
	return 0; // should make calling process exit
      }
      wrap_ts = wrap_count * (nb_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000));
    }
    if (cur_samples < nb_samples) {
      *ptimestamp = (ms_sample[0].ts + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000))) + wrap_ts;
      if (cur_samples == 0) {
	std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
		  << " ts=" << *ptimestamp << std::endl;
      }
      memcpy(buff[0], &ms_sample[cur_samples].samples[0], nsamps*4);
      cur_samples++;
    }
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_read_delay * 1000;
    nanosleep(&req, NULL);
    return nsamps;
  }
#endif
  return samples_received;
Raymond Knopp's avatar
 
Raymond Knopp committed
636 637
}

638 639 640 641
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
laurent's avatar
laurent committed
642
static bool is_equal(double a, double b) {
laurent's avatar
laurent committed
643
    return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
Raymond Knopp's avatar
 
Raymond Knopp committed
644
}
Raymond Knopp's avatar
 
Raymond Knopp committed
645

646
void *freq_thread(void *arg) {
laurent's avatar
laurent committed
647 648 649 650 651 652

    openair0_device *device=(openair0_device *)arg;
    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
653 654
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
655 656 657
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
laurent's avatar
laurent committed
658
 * \returns 0 in success
659
 */
660
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dont_block) {
Raymond Knopp's avatar
 
Raymond Knopp committed
661

laurent's avatar
laurent committed
662 663
    usrp_state_t *s = (usrp_state_t*)device->priv;
    pthread_t f_thread;
Raymond Knopp's avatar
 
Raymond Knopp committed
664

laurent's avatar
laurent committed
665
    printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
666

laurent's avatar
laurent committed
667 668 669 670 671 672 673
    // spawn a thread to handle the frequency change to not block the calling thread
    if (dont_block == 1)
        pthread_create(&f_thread,NULL,freq_thread,(void*)device);
    else {
        s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
        s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
    }
laurent's avatar
laurent committed
674

laurent's avatar
laurent committed
675
    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
676 677 678

}

laurent's avatar
laurent committed
679
/*! \brief Set RX frequencies
680 681
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
682
 * \returns 0 in success
683
 */
Raymond Knopp's avatar
 
Raymond Knopp committed
684 685
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

laurent's avatar
laurent committed
686 687 688
    usrp_state_t *s = (usrp_state_t*)device->priv;
    static int first_call=1;
    static double rf_freq,diff;
Raymond Knopp's avatar
 
Raymond Knopp committed
689

laurent's avatar
laurent committed
690
    uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
Raymond Knopp's avatar
 
Raymond Knopp committed
691

laurent's avatar
laurent committed
692 693 694 695 696 697
    rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
    rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
    rf_freq=openair0_cfg[0].rx_freq[0];
    s->usrp->set_rx_freq(rx_tune_req);

    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
698 699 700

}

701 702 703
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
704
 * \returns 0 in success
705
 */
laurent's avatar
laurent committed
706 707 708 709
int trx_usrp_set_gains(openair0_device* device,
                       openair0_config_t *openair0_cfg) {

    usrp_state_t *s = (usrp_state_t*)device->priv;
710 711
    ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
    s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
laurent's avatar
laurent committed
712 713 714 715 716 717 718 719 720 721 722
    ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
    // limit to maximum gain
    if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
        LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
              openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
        exit(-1);
    }
    s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
    LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
          openair0_cfg[0].rx_gain[0],gain_range.stop());
723

laurent's avatar
laurent committed
724
    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
725
}
726

727 728 729
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
730
int trx_usrp_stop(openair0_device* device) {
laurent's avatar
laurent committed
731
    return(0);
732
}
733

734
/*! \brief USRPB210 RX calibration table */
735
rx_gain_calib_table_t calib_table_b210[] = {
laurent's avatar
laurent committed
736 737 738 739 740 741 742
    {3500000000.0,44.0},
    {2660000000.0,49.0},
    {2300000000.0,50.0},
    {1880000000.0,53.0},
    {816000000.0,58.0},
    {-1,0}
};
743

744
/*! \brief USRPB210 RX calibration table */
745
rx_gain_calib_table_t calib_table_b210_38[] = {
laurent's avatar
laurent committed
746 747 748 749 750 751 752
    {3500000000.0,44.0},
    {2660000000.0,49.8},
    {2300000000.0,51.0},
    {1880000000.0,53.0},
    {816000000.0,57.0},
    {-1,0}
};
753

754
/*! \brief USRPx310 RX calibration table */
755
rx_gain_calib_table_t calib_table_x310[] = {
laurent's avatar
laurent committed
756 757 758 759 760 761 762 763 764
    {3500000000.0,77.0},
    {2660000000.0,81.0},
    {2300000000.0,81.0},
    {1880000000.0,82.0},
    {816000000.0,85.0},
    {-1,0}
};

/*! \brief Set RX gain offset
765 766
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
laurent's avatar
laurent committed
767
 * \returns 0 in success
768
 */
769
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
770

laurent's avatar
laurent committed
771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797
    int i=0;
    // loop through calibration table to find best adjustment factor for RX frequency
    double min_diff = 6e9,diff,gain_adj=0.0;
    if (bw_gain_adjust==1) {
        switch ((int)openair0_cfg[0].sample_rate) {
        case 30720000:
            break;
        case 23040000:
            gain_adj=1.25;
            break;
        case 15360000:
            gain_adj=3.0;
            break;
        case 7680000:
            gain_adj=6.0;
            break;
        case 3840000:
            gain_adj=9.0;
            break;
        case 1920000:
            gain_adj=12.0;
            break;
        default:
            LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
            exit(-1);
            break;
        }
798
    }
laurent's avatar
laurent committed
799 800 801 802 803
    while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
        diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
        LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
              i,
              openair0_cfg->rx_gain_calib_table[i].freq,
laurent's avatar
laurent committed
804 805 806 807 808 809
              openair0_cfg->rx_gain_calib_table[i].offset,diff);
        if (min_diff > diff) {
            min_diff = diff;
            openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
        }
        i++;
laurent's avatar
laurent committed
810
    }
811 812
}

laurent's avatar
laurent committed
813
/*! \brief print the USRP statistics
814 815 816
* \param device the hardware to use
* \returns  0 on success
*/
817
int trx_usrp_get_stats(openair0_device* device) {
laurent's avatar
laurent committed
818
    return(0);
819
}
820

laurent's avatar
laurent committed
821 822 823 824
/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
825
int trx_usrp_reset_stats(openair0_device* device) {
laurent's avatar
laurent committed
826
    return(0);
827
}
828

829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897
#if defined(USRP_REC_PLAY)
extern "C" {
/*! \brief Initializer for USRP record/playback config
 * \param parameter array description
 * \returns  0 on success
 */
int trx_usrp_recplay_config_init(paramdef_t *usrp_recplay_params) {
    // --subframes-file
    memcpy(usrp_recplay_params[0].optname, config_opt_sf_file, strlen(config_opt_sf_file));
    usrp_recplay_params[0].helpstr = config_hlp_sf_file;
    usrp_recplay_params[0].paramflags=PARAMFLAG_NOFREE;
    usrp_recplay_params[0].strptr=(char **)&tmp_filename[0];
    usrp_recplay_params[0].defstrval = NULL;
    usrp_recplay_params[0].type=TYPE_STRING;
    usrp_recplay_params[0].numelt=sizeof(u_sf_filename);
    // --subframes-record
    memcpy(usrp_recplay_params[1].optname, config_opt_sf_rec, strlen(config_opt_sf_rec));
    usrp_recplay_params[1].helpstr = config_hlp_sf_rec;
    usrp_recplay_params[1].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[1].uptr=&u_sf_record;
    usrp_recplay_params[1].defuintval=0;
    usrp_recplay_params[1].type=TYPE_UINT;
    usrp_recplay_params[1].numelt=0;
    // --subframes-replay
    memcpy(usrp_recplay_params[2].optname, config_opt_sf_rep, strlen(config_opt_sf_rep));
    usrp_recplay_params[2].helpstr = config_hlp_sf_rep;
    usrp_recplay_params[2].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[2].uptr=&u_sf_replay;
    usrp_recplay_params[2].defuintval=0;
    usrp_recplay_params[2].type=TYPE_UINT;
    usrp_recplay_params[2].numelt=0;
    // --subframes-max
    memcpy(usrp_recplay_params[3].optname, config_opt_sf_max, strlen(config_opt_sf_max));
    usrp_recplay_params[3].helpstr = config_hlp_sf_max;
    usrp_recplay_params[3].paramflags=0;
    usrp_recplay_params[3].uptr=&u_sf_max;
    usrp_recplay_params[3].defuintval=DEF_NB_SF;
    usrp_recplay_params[3].type=TYPE_UINT;
    usrp_recplay_params[3].numelt=0;
    // --subframes-loops
    memcpy(usrp_recplay_params[4].optname, config_opt_sf_loops, strlen(config_opt_sf_loops));
    usrp_recplay_params[4].helpstr = config_hlp_sf_loops;
    usrp_recplay_params[4].paramflags=0;
    usrp_recplay_params[4].uptr=&u_sf_loops;
    usrp_recplay_params[4].defuintval=DEF_SF_NB_LOOP;
    usrp_recplay_params[4].type=TYPE_UINT;
    usrp_recplay_params[4].numelt=0;
    // --subframes-read-delay
    memcpy(usrp_recplay_params[5].optname, config_opt_sf_rdelay, strlen(config_opt_sf_rdelay));
    usrp_recplay_params[5].helpstr = config_hlp_sf_rdelay;
    usrp_recplay_params[5].paramflags=0;
    usrp_recplay_params[5].uptr=&u_sf_read_delay;
    usrp_recplay_params[5].defuintval=DEF_SF_DELAY_READ;
    usrp_recplay_params[5].type=TYPE_UINT;
    usrp_recplay_params[5].numelt=0;
    // --subframes-write-delay
    memcpy(usrp_recplay_params[6].optname, config_opt_sf_wdelay, strlen(config_opt_sf_wdelay));
    usrp_recplay_params[6].helpstr = config_hlp_sf_wdelay;
    usrp_recplay_params[6].paramflags=0;
    usrp_recplay_params[6].uptr=&u_sf_write_delay;
    usrp_recplay_params[6].defuintval=DEF_SF_DELAY_WRITE;
    usrp_recplay_params[6].type=TYPE_UINT;
    usrp_recplay_params[6].numelt=0;

    return 0; // always ok
}
}
#endif

898
extern "C" {
laurent's avatar
laurent committed
899 900 901 902 903
    /*! \brief Initialize Openair USRP target. It returns 0 if OK
    * \param device the hardware to use
         * \param openair0_cfg RF frontend parameters set by application
         */
    int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957
#if defined(USRP_REC_PLAY)
      paramdef_t usrp_recplay_params[7];
      // to check
      static int done = 0;
      if (done == 1) {
	return 0;
      } // prevent from multiple init
      done = 1;
      // end to check
      memset(usrp_recplay_params, 0, 7*sizeof(paramdef_t));
      memset(&u_sf_filename[0], 0, 1024);
      tmp_filename[0] = u_sf_filename;
      if (trx_usrp_recplay_config_init(usrp_recplay_params) != 0) {
	std::cerr << "USRP device record/replay mode configuration error exiting" << std::endl;
	return -1;
      }
      config_process_cmdline(usrp_recplay_params,sizeof(usrp_recplay_params)/sizeof(paramdef_t),NULL);

      if (strlen(tmp_filename[0]) != 0) {
	(void) strcpy(u_sf_filename, tmp_filename[0]);
      } else {
	(void) strcpy(u_sf_filename, DEF_SF_FILE);
      }

      if (u_sf_replay == 1) u_sf_mode = 2;
      if (u_sf_record == 1) u_sf_mode = 1;
      
      if (u_sf_mode == 2) {
	// Replay subframes from from file
        int bw_gain_adjust=0;
        device->openair0_cfg = openair0_cfg;
	device->type = USRP_B200_DEV;
	openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
	bw_gain_adjust=1;
	openair0_cfg[0].tx_sample_advance     = 80;
	openair0_cfg[0].tx_bw                 = 20e6;
	openair0_cfg[0].rx_bw                 = 20e6;
        openair0_cfg[0].iq_txshift = 4;//shift
        openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
	set_rx_gain_offset(&openair0_cfg[0],0,bw_gain_adjust);
        device->priv = NULL;
        device->trx_start_func = trx_usrp_start;
        device->trx_write_func = trx_usrp_write;
        device->trx_read_func  = trx_usrp_read;
        device->trx_get_stats_func = trx_usrp_get_stats;
        device->trx_reset_stats_func = trx_usrp_reset_stats;
        device->trx_end_func   = trx_usrp_end;
        device->trx_stop_func  = trx_usrp_stop;
        device->trx_set_freq_func = trx_usrp_set_freq;
        device->trx_set_gains_func   = trx_usrp_set_gains;
        device->openair0_cfg = openair0_cfg;
	std::cerr << "USRP device initialized in subframes replay mode for " << u_sf_loops << " loops." << std::endl;
      } else {
#endif
Laurent's avatar
Laurent committed
958
        uhd::set_thread_priority_safe(1.0);
laurent's avatar
laurent committed
959
        usrp_state_t *s = (usrp_state_t*)calloc(sizeof(usrp_state_t),1);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
960
        
961 962 963
	if (openair0_cfg[0].clock_source==gpsdo)        
	    s->use_gps =1;

laurent's avatar
laurent committed
964 965 966 967 968 969 970 971 972
        // Initialize USRP device
        device->openair0_cfg = openair0_cfg;

        std::string args = "type=b200";
        uhd::device_addrs_t device_adds = uhd::device::find(args);

        int vers=0,subvers=0,subsubvers=0;
        int bw_gain_adjust=0;

973 974 975 976 977
#if defined(USRP_REC_PLAY)
	if (u_sf_mode == 1) {
	  std::cerr << "USRP device initialized in subframes record mode" << std::endl;
	}
#endif	
laurent's avatar
laurent committed
978 979 980 981 982 983 984
        sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
        LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
              uhd::get_version_string().c_str(),vers,subvers,subsubvers);

        if(device_adds.size() == 0)  {
            double usrp_master_clock = 184.32e6;
            std::string args = "type=x300";
985

laurent's avatar
laurent committed
986 987 988
            // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
            args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);

Raymond Knopp's avatar
Raymond Knopp committed
989
//    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
laurent's avatar
laurent committed
990

Laurent's avatar
Laurent committed
991 992
            //    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
            uhd::device_addrs_t device_adds = uhd::device::find(args);
993

Laurent's avatar
Laurent committed
994 995 996 997 998 999 1000 1001
            if(device_adds.size() == 0) {
                std::cerr<<"No USRP Device Found. " << std::endl;
                free(s);
                return -1;
            }
            LOG_I(PHY,"Found USRP X300\n");
            s->usrp = uhd::usrp::multi_usrp::make(args);
            // lock mboard clocks
laurent's avatar
laurent committed
1002 1003 1004 1005
            if (openair0_cfg[0].clock_source == internal)
                s->usrp->set_clock_source("internal");
            else
                s->usrp->set_clock_source("external");
1006

Laurent's avatar
Laurent committed
1007 1008
            //Setting device type to USRP X300/X310
            device->type=USRP_X300_DEV;
1009

Laurent's avatar
Laurent committed
1010 1011 1012 1013 1014
            // this is not working yet, master clock has to be set via constructor
            // set master clock rate and sample rate for tx & rx for streaming
            //s->usrp->set_master_clock_rate(usrp_master_clock);

            openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
1015 1016 1017
#if defined(USRP_REC_PLAY)
	    std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
#endif	    
Laurent's avatar
Laurent committed
1018 1019
            switch ((int)openair0_cfg[0].sample_rate) {
            case 30720000:
laurent's avatar
laurent committed
1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042
                // from usrp_time_offset
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 15;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 45;
                openair0_cfg[0].tx_bw                 = 10e6;
                openair0_cfg[0].rx_bw                 = 10e6;
                break;
            case 7680000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 5e6;
                openair0_cfg[0].rx_bw                 = 5e6;
                break;
            case 1920000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 1.25e6;
                openair0_cfg[0].rx_bw                 = 1.25e6;
Laurent's avatar
Laurent committed
1043 1044 1045 1046 1047 1048
                break;
            default:
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }
1049

Laurent's avatar
Laurent committed
1050 1051 1052 1053
        } else {
            LOG_I(PHY,"Found USRP B200\n");
            args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
            s->usrp = uhd::usrp::multi_usrp::make(args);
1054

laurent's avatar
laurent committed
1055 1056 1057 1058 1059 1060 1061 1062 1063
            //  s->usrp->set_rx_subdev_spec(rx_subdev);
            //  s->usrp->set_tx_subdev_spec(tx_subdev);

            // do not explicitly set the clock to "internal", because this will disable the gpsdo
            //    // lock mboard clocks
            //    s->usrp->set_clock_source("internal");
            // set master clock rate and sample rate for tx & rx for streaming

            // lock mboard clocks
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1064
            if (openair0_cfg[0].clock_source == internal){
1065
	        s->usrp->set_clock_source("internal");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1066 1067
            }
            else{
laurent's avatar
laurent committed
1068
                s->usrp->set_clock_source("external");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1069 1070
		s->usrp->set_time_source("external");
            }	
1071

Laurent's avatar
Laurent committed
1072 1073 1074 1075
            device->type = USRP_B200_DEV;
            if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
                bw_gain_adjust=0;
1076 1077 1078
#if defined(USRP_REC_PLAY)
		std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
#endif		
Laurent's avatar
Laurent committed
1079 1080 1081
            } else {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
                bw_gain_adjust=1;
1082 1083 1084
#if defined(USRP_REC_PLAY)
		std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
#endif		
Laurent's avatar
Laurent committed
1085
            }
1086

laurent's avatar
laurent committed
1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123
            switch ((int)openair0_cfg[0].sample_rate) {
            case 30720000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 115;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 23040000:
                s->usrp->set_master_clock_rate(23.04e6); //to be checked
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 113;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                s->usrp->set_master_clock_rate(30.72e06);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 103;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 7680000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 80;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 1920000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 40;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            default:
laurent's avatar
laurent committed
1124 1125 1126 1127 1128
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }
        }
Laurent's avatar
Laurent committed
1129

laurent's avatar
laurent committed
1130 1131 1132
        /* device specific */
        //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
        //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
laurent's avatar
laurent committed
1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
        openair0_cfg[0].iq_txshift = 4;//shift
        openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

        for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
            if (i<openair0_cfg[0].rx_num_channels) {
                s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
                set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);

                ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
                // limit to maximum gain
                AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                             "RX Gain too high, lower by %f dB\n",
                             openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
                s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
                LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                      openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                      openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
            }
        }
1153

laurent's avatar
laurent committed
1154
        for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
1155
	  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
laurent's avatar
laurent committed
1156 1157 1158
            if (i<openair0_cfg[0].tx_num_channels) {
                s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
1159
                s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
laurent's avatar
laurent committed
1160 1161 1162 1163 1164 1165 1166 1167
            }
        }

        //s->usrp->set_clock_source("external");
        //s->usrp->set_time_source("external");

        // display USRP settings
        LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
laurent's avatar
laurent committed
1168
        sleep(1);
laurent's avatar
laurent committed
1169 1170 1171 1172

        // create tx & rx streamer
        uhd::stream_args_t stream_args_rx("sc16", "sc16");
        int samples=openair0_cfg[0].sample_rate;
Laurent's avatar
Laurent committed
1173 1174 1175 1176 1177
	int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
        samples/=10000;
	LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);
	if ( samples < max )
	  stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
Cedric Roux's avatar
Cedric Roux committed
1178
	LOG_I(PHY,"rx_max_num_samps %zu\n",
Laurent's avatar
Laurent committed
1179 1180
	      s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

laurent's avatar
laurent committed
1181 1182 1183
        for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
            stream_args_rx.channels.push_back(i);
        s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
Laurent's avatar
Laurent committed
1184
	
laurent's avatar
laurent committed
1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220
        uhd::stream_args_t stream_args_tx("sc16", "sc16");
        for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
            stream_args_tx.channels.push_back(i);
        s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

        /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
        for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
            s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

        for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
            s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

        for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
            LOG_I(PHY,"RX Channel %d\n",i);
            LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
            LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
            LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
            LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
        }

        for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
            LOG_I(PHY,"TX Channel %d\n",i);
            LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
            LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
            LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
            LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
        }

        LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());

        device->priv = s;
        device->trx_start_func = trx_usrp_start;
        device->trx_write_func = trx_usrp_write;
        device->trx_read_func  = trx_usrp_read;
laurent's avatar
laurent committed
1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237
        device->trx_get_stats_func = trx_usrp_get_stats;
        device->trx_reset_stats_func = trx_usrp_reset_stats;
        device->trx_end_func   = trx_usrp_end;
        device->trx_stop_func  = trx_usrp_stop;
        device->trx_set_freq_func = trx_usrp_set_freq;
        device->trx_set_gains_func   = trx_usrp_set_gains;
        device->openair0_cfg = openair0_cfg;

        s->sample_rate = openair0_cfg[0].sample_rate;
        // TODO:
        // init tx_forward_nsamps based usrp_time_offset ex
        if(is_equal(s->sample_rate, (double)30.72e6))
            s->tx_forward_nsamps  = 176;
        if(is_equal(s->sample_rate, (double)15.36e6))
            s->tx_forward_nsamps = 90;
        if(is_equal(s->sample_rate, (double)7.68e6))
            s->tx_forward_nsamps = 50;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1238 1239 1240 1241 1242 1243 1244 1245

        if (s->use_gps == 1) {
	   if (sync_to_gps(device)) {
		 LOG_I(PHY,"USRP fails to sync with GPS...\n");
            exit(0);   
           } 
        }
 
1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284
#if defined(USRP_REC_PLAY)
      }
#endif
#if defined(USRP_REC_PLAY)
      if (u_sf_mode == 1) { // record mode	
	ms_sample = (iqrec_t*) malloc(u_sf_max * sizeof(iqrec_t));
	if (ms_sample == NULL) {
	  std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
	  exit(-1);
	}
	memset(ms_sample, 0, u_sf_max * BELL_LABS_IQ_BYTES_PER_SF);
      }
      if (u_sf_mode == 2) {
	// use mmap
	mmapfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);
	if (mmapfd != 0) {
	  fstat(mmapfd, &sb);
	  std::cerr << "Loading subframes using mmap() from " << u_sf_filename << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
	  ms_sample = (iqrec_t*) mmap(NULL, sb.st_size, PROT_WRITE, MAP_PRIVATE, mmapfd, 0);
	  if (ms_sample != MAP_FAILED) {
	    nb_samples = (sb.st_size / sizeof(iqrec_t));
	    int aligned = (((unsigned long)ms_sample & 31) == 0)? 1:0;
	    std::cerr<< "Loaded "<< nb_samples << " subframes." << std::endl;
	    if (aligned == 0) {
	      std::cerr<< "mmap address is not 32 bytes aligned, exiting." << std::endl;
	      close(mmapfd);
	      exit(-1);
	    }
	  } else {
	    std::cerr << "Cannot mmap file, exiting." << std::endl;
	    close(mmapfd);
	    exit(-1);
	  }
	} else {
	    std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
	    exit(-1);
	}
      }
#endif	
laurent's avatar
laurent committed
1285 1286
        return 0;
    }
Raymond Knopp's avatar
 
Raymond Knopp committed
1287
}
1288
/*@}*/