Merge remote-tracking branch 'origin/develop-NR_SA_F1AP_5GRECORDS' into...

Merge remote-tracking branch 'origin/develop-NR_SA_F1AP_5GRECORDS' into develop-NR_SA_F1AP_5GRECORDS

doc/TESTING_5GSA_setup.md

@@ -24,7 +24,7 @@ At the moment of writing this document interoperability with the following COTS
 
  
  ## 1.1  gNB build and configuration
-At the moment of writing this document most of the code to support the SA setup is not merged into develop branch yet, but it is accessible through the following branches:
+At the moment of writing this document, most of the code to support the SA setup is not merged into develop branch yet, but it is accessible through the following branches:
 
  - NR_SA_F1AP_5GRECORDS
  - develop-NR_SA_F1AP_5GRECORDS (up-to-date with latest develop branch)
@@ -32,7 +32,7 @@ At the moment of writing this document most of the code to support the SA setup
 To build the gNB executable:
 ```bash
     cd cmake_targets
-    ./build_oai -I -w USRP #For first time installation only to install software dependencies
+    ./build_oai -I -w USRP #For OAI first time installation only to install software dependencies
     ./build_oai --gNB -w USRP
 ```
 
@@ -87,8 +87,7 @@ For the configuration of the gNB in CU and DU blocks the following sample config
 At the point of writing this document the control-plane exchanges between the CU and the DU over *F1-C* interface have been validated. The integration of *F1-U* over gtp-u for the support of data plane traffic is ongoing.
 
 ## 1.2  OAI 5G Core Network installation and configuration
-The instructions for the installation of OAI CN components (AMF, SMF, NRF, UPF) using docker compose can be found [here](https://gitlab.eurecom.fr/oai/cn5g). Below are some complementary instructions which can be useful for the deployment...
-
+The instructions for the installation of OAI CN components (AMF, SMF, NRF, UPF) using docker compose can be found [here](https://gitlab.eurecom.fr/oai/cn5g). Below are some complementary instructions which can be useful for the deployment.
 
  ## 1.3  Execution of SA scenario
 
@@ -98,11 +97,66 @@ After having configured the gNB, we can start the individual components in the f
  - Launch gNB
  - Launch COTS UE (disable airplane mode)
 
-The execution command to start the gNB is the following:
+The execution command to start the gNB (in monolithic mode) is the following:
 ```bash
-cd cmake_targets/ran_build/cuild
+cd cmake_targets/ran_build/build
 sudo ./nr-softmodem -E --sa -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf
 ```	
 
 # 2. SA Setup with OAI UE 
-For the setup with the OAI UE
+The SA setup with OAI UE has been validated with RFSIMULATOR for the moment. The control plane for the successful UE registration and PDU Session establishment has been verified with OAI and Nokia SA Box CNs. User-plane traffic validation after the establishment of the 5G connection is still pending for this setup. 
+
+In the following, we provide the instructions on how to build, configure and execute this SA setup. 
+
+## 2.1 Build and configuration
+To build the gNB and OAI UE executables:  
+
+```bash
+    cd cmake_targets
+    ./build_oai -I #For OAI first time installation only to install software dependencies
+    ./build_oai --gNB --nrUE -w SIMU
+```
+The gNB configuration can be performed according to what is described in section 1.1, using the same reference configuration file as with the RF scenario.
+
+### NAS configuration for the OAI UE
+At the moment, the NAS configuration parameters of the OAI UE are hardcoded in ***openair3/NAS/NR_UE/nr_nas_msg_sim.c***.  More specifically:
+
+ - The SUCI (*Subscription Concealed Identifier*) corresponding to default IMSI 2089900007487 is hardcoded in functions *generateRegistrationRequest()* and *generateIdentityResponse()* through the following lines:
+```bash
+    mm_msg->registration_request.fgsmobileidentity.suci.typeofidentity = FGS_MOBILE_IDENTITY_SUCI;
+    mm_msg->registration_request.fgsmobileidentity.suci.mncdigit1 = 9;
+    mm_msg->registration_request.fgsmobileidentity.suci.mncdigit2 = 9;
+    mm_msg->registration_request.fgsmobileidentity.suci.mncdigit3 = 0xf;
+    mm_msg->registration_request.fgsmobileidentity.suci.mccdigit1 = 2;
+    mm_msg->registration_request.fgsmobileidentity.suci.mccdigit2 = 0;
+    mm_msg->registration_request.fgsmobileidentity.suci.mccdigit3 = 8;
+    mm_msg->registration_request.fgsmobileidentity.suci.schemeoutput = 0x4778;
+```
+ - USIM_API_K and OPc keys are hardcoded at the beginning of the file:
+```bash
+// USIM_API_K: fe c8 6b a6 eb 70 7e d0 89 05 75 7b 1b b4 4b 8f 
+uint8_t k[16] = {0xfe, 0xc8, 0x6b, 0xa6, 0xeb, 0x70, 0x7e, 0xd0, 0x89, 0x05, 0x75, 0x7b, 0x1b, 0xb4, 0x4b, 0x8f};
+// OPC: c4 24 49 36 3b ba d0 2b 66 d1 6b c9 75 d7 7c c1
+const uint8_t opc[16] = {0xc4, 0x24, 0x49, 0x36, 0x3b, 0xba, 0xd0, 0x2b, 0x66, 0xd1, 0x6b, 0xc9, 0x75, 0xd7, 0x7c, 0xc1};
+```
+-  The NSSAI (*Network Slice Assistance Information*) and DNN (*Data Network Name*) are hardcoded in function *generatePduSessionEstablishRequest()*
+```bash
+  uint8_t             nssai[]={1,0,0,1}; //Corresponding to SST:1, SD:1
+  uint8_t             dnn[4]={0x4,0x6f,0x61,0x69}; //Corresponding to dnn:"oai"
+```
+For interoperability with OAI or other CNs, it should be ensured that the configuration of the aforementioned parameters match the configuration of the corresponding subscribed user at the core network.
+Hardcoding of the USIM information will soon be substituted with parsing those parameters from a configuration file. 
+
+## 2.2 Execution of SA scenario
+
+The order of starting the different components should be the same as the one described in section 1.3. 
+
+ - To launch the gNB:
+ ```bash
+ sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --rfsim --sa
+ ```
+- To launch the OAI UE:
+ ```bash
+sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --rfsim --sa --nokrnmod
+```
+The IP address at the execution command of the OAI UE corresponds to the target IP of the gNB host that the RFSIMULATOR at the UE will connect to. In the above example, we assume that the gNB and UE are running on the same host so the specified address (127.0.0.1) is the one of the loopback interface.