Merge remote-tracking branch 'origin/feature-59-tm4' into develop_integration_w24

cmake_targets/autotests/test_case_list.xml

@@ -941,9 +941,14 @@
       (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
       (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
       (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
-      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
+      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%)),
+      (Test 11b, 10 MHz, R7-1.FDD (MCS 25), EVA5, 16.7dB (70%)),
+      (Test 15, 20 MHz, R.9 FDD	(MCS 26), EVA5, 17.6dB (70%)),
+      (Test 15b, 20 MHz, R.9-2 FDD (MCS 26, 17PRB), EVA5, 17.3dB (70%)),
+      (Test 15c, 20 MHz, R.9-1 FDD (MCS 26, 83 PRB), EVA5, 16.6dB (70%)),
+
       (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
-      (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
+      (TM2 Test 1b 5 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
        </desc>
       <pre_compile_prog></pre_compile_prog>
       <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
@@ -960,6 +965,9 @@
                        -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70
                        -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70
                        -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
+                       -m26 -gF -s17.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -O70
+                       -m26 -gF -s17.3 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1600 -O70
+                       -m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O70
 		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70
                        -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70</main_exec_args>
       <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>

cmake_targets/lte-simulators/CMakeLists.txt

@@ -3,7 +3,7 @@ set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
 set(RF_BOARD None)
 set(XFORMS True)
-
+set(ENABLE_ITTI False)
 set(DEBUG_PHY False)
 set(MU_RECIEVER False)
 set(RANDOM_BF False)

openair1/PHY/LTE_ESTIMATION/defs.h

@@ -161,7 +161,7 @@ int lte_est_freq_offset(int **dl_ch_estimates,
                         LTE_DL_FRAME_PARMS *frame_parms,
                         int l,
                         int* freq_offset,
-			int reset);
+            int reset);
 
 int lte_mbsfn_est_freq_offset(int **dl_ch_estimates,
                               LTE_DL_FRAME_PARMS *frame_parms,
@@ -180,7 +180,7 @@ This function computes the time domain channel response, finds the peak and adju
 void lte_adjust_synch(LTE_DL_FRAME_PARMS *frame_parms,
                       PHY_VARS_UE *phy_vars_ue,
                       module_id_t eNb_id,
-					  uint8_t subframe,
+                      uint8_t subframe,
                       unsigned char clear,
                       short coef);
 
@@ -189,7 +189,8 @@ void lte_ue_measurements(PHY_VARS_UE *phy_vars_ue,
                          unsigned int subframe_offset,
                          unsigned char N0_symbol,
                          unsigned char abstraction_flag,
-						 uint8_t subframe);
+                         unsigned char rank_adaptation,
+                         uint8_t subframe);
 
 //! \brief This function performance RSRP/RSCP measurements
 void ue_rrc_measurements(PHY_VARS_UE *phy_vars_ue,
@@ -214,11 +215,11 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa
 
 //! Automatic gain control
 void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue,
-		      uint32_t rx_power_fil_dB,
+              uint32_t rx_power_fil_dB,
                       unsigned char eNB_id);
 
 int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,
-			      eNB_rxtx_proc_t *proc,
+                  eNB_rxtx_proc_t *proc,
                               module_id_t eNB_id,
                               module_id_t UE_id,
                               uint8_t l,
@@ -246,7 +247,7 @@ int lte_est_timing_advance(LTE_DL_FRAME_PARMS *frame_parms,
 int lte_est_timing_advance_pusch(PHY_VARS_eNB* phy_vars_eNB,module_id_t UE_id);
 
 void lte_eNB_I0_measurements(PHY_VARS_eNB *phy_vars_eNB,
-			     int subframe,
+                 int subframe,
                              module_id_t eNB_id,
                              unsigned char clear);
 

openair1/PHY/LTE_TRANSPORT/dlsch_coding.c

@@ -598,7 +598,9 @@ int dlsch_encoding(PHY_VARS_eNB *eNB,
 
   //  if (dlsch->harq_processes[harq_pid]->Ndi == 1) {  // this is a new packet
   if (dlsch->harq_processes[harq_pid]->round == 0) {  // this is a new packet
-
+#ifdef DEBUG_DLSCH_CODING
+  printf("encoding thinks this is a new packet \n");
+#endif
     /*
     int i;
     printf("dlsch (tx): \n");
@@ -705,6 +707,9 @@ int dlsch_encoding(PHY_VARS_eNB *eNB,
 #endif
 
     start_meas(rm_stats);
+#ifdef DEBUG_DLSCH_CODING
+  printf("rvidx in encoding = %d\n", dlsch->harq_processes[harq_pid]->rvidx);
+#endif
     r_offset += lte_rate_matching_turbo(dlsch->harq_processes[harq_pid]->RTC[r],
                                         G,  //G
                                         dlsch->harq_processes[harq_pid]->w[r],
@@ -775,7 +780,9 @@ int dlsch_encoding_SIC(PHY_VARS_UE *ue,
 
   //  if (dlsch->harq_processes[harq_pid]->Ndi == 1) {  // this is a new packet
   if (dlsch->harq_processes[harq_pid]->round == 0) {  // this is a new packet
-
+#ifdef DEBUG_DLSCH_CODING
+  printf("SIC encoding thinks this is a new packet \n");
+#endif
     /*
     int i;
     printf("dlsch (tx): \n");
@@ -882,6 +889,9 @@ int dlsch_encoding_SIC(PHY_VARS_UE *ue,
 #endif
 
     start_meas(rm_stats);
+#ifdef DEBUG_DLSCH_CODING
+    printf("rvidx in SIC encoding = %d\n", dlsch->harq_processes[harq_pid]->rvidx);
+#endif
     r_offset += lte_rate_matching_turbo(dlsch->harq_processes[harq_pid]->RTC[r],
                                         G,  //G
                                         dlsch->harq_processes[harq_pid]->w[r],

openair1/PHY/LTE_TRANSPORT/dlsch_decoding.c

@@ -393,7 +393,9 @@ uint32_t  dlsch_decoding(PHY_VARS_UE *phy_vars_ue,
           harq_process->round);
 #endif
 
-//printf("dlsch->harq_processes[harq_pid]->rvidx = %d\n", dlsch->harq_processes[harq_pid]->rvidx);
+#ifdef DEBUG_DLSCH_DECODING
+    printf(" in decoding dlsch->harq_processes[harq_pid]->rvidx = %d\n", dlsch->harq_processes[harq_pid]->rvidx);
+#endif
     if (lte_rate_matching_turbo_rx(harq_process->RTC[r],
                                    G,
                                    harq_process->w[r],

openair1/PHY/LTE_TRANSPORT/dlsch_llr_computation.c

@@ -693,9 +693,8 @@ int32_t dlsch_qpsk_llr_SIC(LTE_DL_FRAME_PARMS *frame_parms,
                            uint8_t num_pdcch_symbols,
                            uint16_t nb_rb,
                            uint8_t subframe,
-                           uint32_t rb_alloc,
                            uint16_t mod_order_0,
-                           LTE_UE_DLSCH_t *dlsch0)
+                           uint32_t rb_alloc)
 {
 
   int16_t rho_amp_x0[2*frame_parms->N_RB_DL*12];
@@ -726,7 +725,7 @@ int32_t dlsch_qpsk_llr_SIC(LTE_DL_FRAME_PARMS *frame_parms,
       amp_tmp=0x1fff;//1.5*dlsch0->sqrt_rho_a; already taken into account
 
     if (mod_order_0==6)
-      amp_tmp=amp_tmp<<1; // to compensate for >> 1 shift in modulation to avoid overflow
+      amp_tmp=amp_tmp<<1; // to compensate for >> 1 shift in modulation
 
 
     pbch_pss_sss_adjust=adjust_G2(frame_parms,&rb_alloc,2,subframe,symbol);
@@ -933,10 +932,8 @@ void dlsch_16qam_llr_SIC (LTE_DL_FRAME_PARMS *frame_parms,
                           int32_t **dl_ch_mag,
                           uint16_t nb_rb,
                           uint8_t subframe,
-                          uint32_t rb_alloc,
                           uint16_t mod_order_0,
-                          LTE_UE_DLSCH_t *dlsch0
-                          )
+                          uint32_t rb_alloc)
 {
   int16_t rho_amp_x0[2*frame_parms->N_RB_DL*12];
   int16_t rho_rho_amp_x0[2*frame_parms->N_RB_DL*12];
@@ -1197,10 +1194,8 @@ void dlsch_64qam_llr_SIC(LTE_DL_FRAME_PARMS *frame_parms,
                          int32_t **dl_ch_magb,
                          uint16_t nb_rb,
                          uint8_t subframe,
-                         uint32_t rb_alloc,
                          uint16_t mod_order_0,
-                         LTE_UE_DLSCH_t *dlsch0
-                         )
+                         uint32_t rb_alloc)
 {
   int16_t rho_amp_x0[2*frame_parms->N_RB_DL*12];
   int16_t rho_rho_amp_x0[2*frame_parms->N_RB_DL*12];

openair1/PHY/LTE_TRANSPORT/extern.h

@@ -23,6 +23,8 @@ extern unsigned int dlsch_tbs25[27][25],TBStable[27][110],TBStable1C[32];
 extern unsigned short lte_cqi_eff1024[16];
 extern char lte_cqi_snr_dB[15];
 extern short conjugate[8],conjugate2[8];
+extern short minus_one[8];
+extern short minus_one[8];
 extern short *ul_ref_sigs[30][2][33];
 extern short *ul_ref_sigs_rx[30][2][33];
 extern unsigned short dftsizes[33];

openair1/PHY/LTE_TRANSPORT/initial_sync.c

@@ -43,13 +43,13 @@ extern openair0_config_t openair0_cfg[];
 
 //#define DEBUG_INITIAL_SYNCH
 
-int pbch_detection(PHY_VARS_UE *ue, runmode_t mode) 
+int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
 {
 
   uint8_t l,pbch_decoded,frame_mod4,pbch_tx_ant,dummy;
   LTE_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
   char phich_resource[6];
-  
+
 #ifdef DEBUG_INITIAL_SYNCH
   LOG_I(PHY,"[UE%d] Initial sync: starting PBCH detection (rx_offset %d)\n",ue->Mod_id,
         ue->rx_offset);
@@ -63,7 +63,7 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
 	     ue->rx_offset,
 	     0,
 	     1);
-  }  
+  }
   for (l=0; l<frame_parms->symbols_per_tti/2; l++) {
 
     slot_fep(ue,
@@ -72,7 +72,7 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
 	     ue->rx_offset,
 	     0,
 	     1);
-  }  
+  }
   slot_fep(ue,
 	   0,
 	   2,
@@ -83,9 +83,11 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
   lte_ue_measurements(ue,
 		      ue->rx_offset,
 		      0,
-		      0,0);
-  
-  
+                      0,
+		      0,
+                      0);
+
+
   if (ue->frame_parms.frame_type == TDD) {
     ue_rrc_measurements(ue,
 			2,
@@ -541,8 +543,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
 	  ue->measurements.n0_power_tot_dBm,
 	  10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
 	  (10*log10(ue->measurements.rsrq[0])));
-    
-    
+
     LOG_I(PHY, "[UE %d] Frame %d MIB Information => %s, %s, NidCell %d, N_RB_DL %d, PHICH DURATION %d, PHICH RESOURCE %s, TX_ANT %d\n",
 	  ue->Mod_id,
 	  ue->proc.proc_rxtx[0].frame_rx,
@@ -599,7 +600,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
     for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
       rx_power += signal_energy(&ue->common_vars.rxdata[aarx][sync_pos2],
 				frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
-    
+
     /*
     // do a measurement on the full frame
     for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
@@ -608,7 +609,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
     */
 
     // we might add a low-pass filter here later
-    ue->measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx; 
+    ue->measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx;
 
     ue->measurements.rx_power_avg_dB[0] = dB_fixed(ue->measurements.rx_power_avg[0]);
 
@@ -617,7 +618,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
 #endif
 
 #ifndef OAI_USRP
-#ifndef OAI_BLADERF 
+#ifndef OAI_BLADERF
 #ifndef OAI_LMSSDR
   phy_adjust_gain(ue,ue->measurements.rx_power_avg_dB[0],0);
 #endif
@@ -628,7 +629,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
   else {
 
 #ifndef OAI_USRP
-#ifndef OAI_BLADERF 
+#ifndef OAI_BLADERF
 #ifndef OAI_LMSSDR
   phy_adjust_gain(ue,dB_fixed(ue->measurements.rssi),0);
 #endif

openair1/PHY/LTE_TRANSPORT/vars.h

@@ -59,8 +59,8 @@ char lte_cqi_snr_dB[15] = { -2,
 
 unsigned char ue_power_offsets[25] = {14,11,9,8,7,6,6,5,4,4,4,3,3,3,2,2,2,1,1,1,1,1,0,0,0};
 
-short conjugate[8]__attribute__((aligned(16))) = {-1,1,-1,1,-1,1,-1,1} ;
-short conjugate2[8]__attribute__((aligned(16))) = {1,-1,1,-1,1,-1,1,-1} ;
+short conjugate[8]__attribute__((aligned(16))) = {-1,1,-1,1,-1,1,-1,1};
+short conjugate2[8]__attribute__((aligned(16))) = {1,-1,1,-1,1,-1,1,-1};
 
 int qam64_table[8],qam16_table[4];
 

openair1/PHY/TOOLS/defs.h

@@ -338,6 +338,9 @@ uint8_t log2_approx64(unsigned long long int x);
 int16_t invSqrt(int16_t x);
 uint32_t angle(struct complex16 perrror);
 
+/// computes the number of factors 2 in x
+unsigned char factor2(unsigned int x);
+
 /*!\fn int32_t phy_phase_compensation_top (uint32_t pilot_type, uint32_t initial_pilot,
         uint32_t last_pilot, int32_t ignore_prefix);
 Compensate the phase rotation of the RF. WARNING: This function is currently unused. It has not been tested!

openair1/PHY/TOOLS/log2_approx.c

@@ -37,6 +37,26 @@ unsigned char log2_approx(unsigned int x)
   return(l2);
 }
 
+unsigned char factor2(unsigned int x)
+{
+
+  int i;
+  unsigned char l2;
+
+  l2=0;
+
+  for (i=0; i<31; i++)
+    if ((x&(1<<i)) != 0)
+      break;
+
+  l2 = i;
+
+  //printf("factor2(%d) = %d\n",x,l2);
+  return(l2);
+}
+
+
+
 unsigned char log2_approx64(unsigned long long int x)
 {
 

openair1/PHY/TOOLS/lte_phy_scope_tm4.c

@@ -24,6 +24,7 @@
 #include "lte_phy_scope.h"
 #define TPUT_WINDOW_LENGTH 100
 int otg_enabled;
+int use_sic_receiver=0;
 FL_COLOR rx_antenna_colors[4] = {FL_RED,FL_BLUE,FL_GREEN,FL_YELLOW};
 float tput_time_enb[NUMBER_OF_UE_MAX][TPUT_WINDOW_LENGTH] = {{0}};
 float tput_enb[NUMBER_OF_UE_MAX][TPUT_WINDOW_LENGTH] = {{0}};
@@ -54,6 +55,21 @@ static void dl_traffic_on_off( FL_OBJECT *button, long arg)
     fl_set_object_color(button, FL_RED, FL_RED);
   }
 }
+
+static void sic_receiver_on_off( FL_OBJECT *button, long arg)
+{
+
+  if (fl_get_button(button)) {
+    fl_set_object_label(button, "SIC Receiver ON");
+    use_sic_receiver = 1;
+    fl_set_object_color(button, FL_GREEN, FL_GREEN);
+  } else {
+    fl_set_object_label(button, "SIC Receiver OFF");
+    use_sic_receiver = 0;
+    fl_set_object_color(button, FL_RED, FL_RED);
+  }
+}
+
 FD_lte_phy_scope_enb *create_lte_phy_scope_enb( void )
 {
   FL_OBJECT *obj;
@@ -398,16 +414,17 @@ FD_lte_phy_scope_ue *create_lte_phy_scope_ue( void ) {
     fl_set_object_boxtype( fdui->pdsch_tput, FL_EMBOSSED_BOX );
     fl_set_object_color( fdui->pdsch_tput, FL_BLACK, FL_WHITE );
     fl_set_object_lcolor( fdui->pdsch_tput, FL_WHITE ); // Label color
+    */
     // Generic UE Button
     fdui->button_0 = fl_add_button( FL_PUSH_BUTTON, 540, 720, 240, 40, "" );
     fl_set_object_lalign(fdui->button_0, FL_ALIGN_CENTER );
-    //openair_daq_vars.use_ia_receiver = 0;
+    //use_sic_receiver = 0;
     fl_set_button(fdui->button_0,0);
-    fl_set_object_label(fdui->button_0, "IA Receiver OFF");
+    fl_set_object_label(fdui->button_0, "SIC Receiver OFF");
     fl_set_object_color(fdui->button_0, FL_RED, FL_RED);
-    fl_set_object_callback(fdui->button_0, ia_receiver_on_off, 0 );
+    fl_set_object_callback(fdui->button_0, sic_receiver_on_off, 0 );
     fl_hide_object(fdui->button_0);
-    */
+
     fl_end_form( );
     fdui->lte_phy_scope_ue->fdui = fdui;
     return fdui;
@@ -461,6 +478,7 @@ void phy_scope_UE(FD_lte_phy_scope_ue *form,
         }
   */
     }
+    fl_show_object(form->button_0);
        if (phy_vars_ue->dlsch[subframe&0x1][eNB_id][1]!=NULL) {
         harq_pid = phy_vars_ue->dlsch[subframe&0x1][eNB_id][1]->current_harq_pid;
   if (harq_pid>=8)
@@ -797,4 +815,16 @@ void phy_scope_UE(FD_lte_phy_scope_ue *form,
     for (arx=0;arx<nb_antennas_rx;arx++) {
         free(chest_t_abs[arx]);
     }
+
+    //This is done to avoid plotting old data when TB0 is disabled, and TB1 is mapped onto CW0
+    /*if (phy_vars_ue->transmission_mode[eNB_id]==3 && phy_vars_ue->transmission_mode[eNB_id]==4){
+      for (int i = 0; i<8; ++i)
+        for (int j = 0; j < 7*2*frame_parms->N_RB_DL*12+4; ++j )
+          phy_vars_ue->pdsch_vars[subframe&0x1][eNB_id]->rxdataF_comp1[0][0][i][j]=0;
+
+      for (int m=0; m<coded_bits_per_codeword1; ++m)
+          phy_vars_ue->pdsch_vars[subframe&0x1][eNB_id]->llr[0][m]=0;
+      }*/
   }
+
+

openair1/SCHED/defs.h

@@ -102,7 +102,7 @@ void phy_procedures_eNB_lte(uint8_t subframe,PHY_VARS_eNB **phy_vars_eNB,uint8_t
   @param r_type indicates the relaying operation: 0: no_relaying, 1: unicast relaying type 1, 2: unicast relaying type 2, 3: multicast relaying
   @param *phy_vars_rn pointer to RN variables
 */
-void phy_procedures_UE_lte(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
+void phy_procedures_UE_lte(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
 
 #if defined(Rel10) || defined(Rel14)
 /*! \brief Top-level entry routine for relay node procedures when acting as eNB. This proc will make us of the existing eNB procs.
@@ -138,7 +138,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t
   @param r_type indicates the relaying operation: 0: no_relaying, 1: unicast relaying type 1, 2: unicast relaying type 2, 3: multicast relaying
   @param phy_vars_rn pointer to RN variables
 */
-int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
+int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
 
 /*! \brief Scheduling for UE TX procedures in TDD S-subframes.
   @param phy_vars_ue Pointer to UE variables on which to act
@@ -163,7 +163,7 @@ void phy_procedures_UE_S_RX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abst
   @param phy_vars_rn pointer to the RN variables
   @param do_meas Do inline timing measurement
 */
-void phy_procedures_eNB_TX(PHY_VARS_eNB *phy_vars_eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn,int do_meas);
+void phy_procedures_eNB_TX(PHY_VARS_eNB *phy_vars_eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn,int do_meas, int do_pdcch_flag);
 
 /*! \brief Scheduling for eNB RX UE-specific procedures in normal subframes.
   @param phy_vars_eNB Pointer to eNB variables on which to act

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -1147,7 +1147,8 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
 			   eNB_rxtx_proc_t *proc,
                            relaying_type_t r_type,
 			   PHY_VARS_RN *rn,
-			   int do_meas)
+			   int do_meas,
+			   int do_pdcch_flag)
 {
   UNUSED(rn);
   int frame=proc->frame_tx;
@@ -1317,21 +1318,6 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
   }
 
 
-  num_pdcch_symbols = DCI_pdu->num_pdcch_symbols;
-  LOG_D(PHY,"num_pdcch_symbols %"PRIu8",(dci common %"PRIu8", dci uespec %"PRIu8"\n",num_pdcch_symbols,
-        DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
-
-#if defined(SMBV) 
-  // Sets up PDCCH and DCI table
-  if (smbv_is_config_frame(frame) && (smbv_frame_cnt < 4) && ((DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci)>0)) {
-    LOG_D(PHY,"[SMBV] Frame %3d, SF %d PDCCH, number of DCIs %d\n",frame,subframe,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
-    dump_dci(fp,&DCI_pdu->dci_alloc[0]);
-    smbv_configure_pdcch(smbv_fname,(smbv_frame_cnt*10) + (subframe),num_pdcch_symbols,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
-  }
-#endif
-
-  VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_DCI_INFO,DCI_pdu->num_pdcch_symbols);
-
   // loop over all DCIs for this subframe to generate DLSCH allocations
   for (i=0; i<DCI_pdu->Num_common_dci + DCI_pdu->Num_ue_spec_dci ; i++) {
     LOG_D(PHY,"[eNB] Subframe %d: DCI %d/%d : rnti %x, CCEind %d\n",subframe,i,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci,DCI_pdu->dci_alloc[i].rnti,DCI_pdu->dci_alloc[i].firstCCE);
@@ -1390,23 +1376,28 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
     eNB->num_common_dci[(subframe)&1]=0;
   }
 
+
   if (eNB->abstraction_flag == 0) {
+    if (do_pdcch_flag) {
+      if (DCI_pdu->Num_ue_spec_dci+DCI_pdu->Num_common_dci > 0) {
+	LOG_D(PHY,"[eNB %"PRIu8"] Frame %d, subframe %d: Calling generate_dci_top (pdcch) (common %"PRIu8",ue_spec %"PRIu8")\n",eNB->Mod_id,frame, subframe,
+	      DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
+      }
 
-    if (DCI_pdu->Num_ue_spec_dci+DCI_pdu->Num_common_dci > 0) {
-      LOG_D(PHY,"[eNB %"PRIu8"] Frame %d, subframe %d: Calling generate_dci_top (pdcch) (common %"PRIu8",ue_spec %"PRIu8")\n",eNB->Mod_id,frame, subframe,
-            DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
+      num_pdcch_symbols = generate_dci_top(DCI_pdu->Num_ue_spec_dci,
+					   DCI_pdu->Num_common_dci,
+					   DCI_pdu->dci_alloc,
+					   0,
+					   AMP,
+					   fp,
+					   eNB->common_vars.txdataF[0],
+					   subframe);
+    }
+    else {
+      num_pdcch_symbols = DCI_pdu->num_pdcch_symbols;
+      LOG_D(PHY,"num_pdcch_symbols %"PRIu8" (dci common %"PRIu8", dci uespec %"PRIu8")\n",num_pdcch_symbols,
+	    DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
     }
-
-
-    num_pdcch_symbols = generate_dci_top(DCI_pdu->Num_ue_spec_dci,
-                                         DCI_pdu->Num_common_dci,
-                                         DCI_pdu->dci_alloc,
-                                         0,
-                                         AMP,
-                                         fp,
-                                         eNB->common_vars.txdataF[0],
-                                         subframe);
-
   }
 
 #ifdef PHY_ABSTRACTION // FIXME this ifdef seems suspicious
@@ -1417,8 +1408,19 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
 
 #endif
 
+  VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_DCI_INFO,DCI_pdu->num_pdcch_symbols);
+
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PDCCH_TX,0);
 
+#if defined(SMBV) 
+  // Sets up PDCCH and DCI table
+  if (smbv_is_config_frame(frame) && (smbv_frame_cnt < 4) && ((DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci)>0)) {
+    LOG_D(PHY,"[SMBV] Frame %3d, SF %d PDCCH, number of DCIs %d\n",frame,subframe,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
+    dump_dci(fp,&DCI_pdu->dci_alloc[0]);
+    smbv_configure_pdcch(smbv_fname,(smbv_frame_cnt*10) + (subframe),num_pdcch_symbols,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
+  }
+#endif
+
   // Check for SI activity
 
   if ((eNB->dlsch_SI) && (eNB->dlsch_SI->active == 1)) {

openair1/SIMULATION/LTE_PHY/pbchsim.c

@@ -937,6 +937,7 @@ int main(int argc, char **argv)
                                 0,
                                 1,
                                 0,
+                                0,
                                 0);
             /*
              if (trial%100 == 0) {

openair1/SIMULATION/LTE_PHY/pucchsim.c

@@ -297,7 +297,7 @@ int main(int argc, char **argv)
   }
 
   logInit();
-  itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
+  //itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
   g_log->log_component[PHY].level = LOG_DEBUG;
   g_log->log_component[PHY].flag = LOG_HIGH;
 

targets/RT/USER/lte-enb.c

@@ -450,7 +450,7 @@ void proc_tx_high0(PHY_VARS_eNB *eNB,
   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB+offset, proc->frame_tx );
   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB+offset, proc->subframe_tx );
 
-  phy_procedures_eNB_TX(eNB,proc,r_type,rn,1);
+  phy_procedures_eNB_TX(eNB,proc,r_type,rn,1,1);
 
   /* we're done, let the next one proceed */
   if (pthread_mutex_lock(&sync_phy_proc.mutex_phy_proc_tx) != 0) {

targets/RT/USER/lte-ue.c

@@ -555,7 +555,7 @@ static void *UE_thread_rxn_txnp4(void *arg) {
                        (sf_type==SF_UL? "SF_UL" :
                         (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
             }
-            phy_procedures_UE_RX( UE, proc, 0, 0, UE->mode, no_relay, NULL );
+            phy_procedures_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
         }
 
 #if UE_TIMING_TRACE