Commit b61b591e authored by Mario Hudon's avatar Mario Hudon

Merge remote-tracking branch 'oai-eurecom/develop' into NR_MAC_SSB_RO_UE_IDCC

parents 3874e934 b7067177
No related merge requests found
......@@ -199,7 +199,7 @@ pipeline {
stage ("Start VM -- enb-ethernet") {
steps {
timeout (time: 5, unit: 'MINUTES') {
timeout (time: 7, unit: 'MINUTES') {
sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
}
}
......@@ -207,7 +207,7 @@ pipeline {
stage ("Start VM -- ue-ethernet") {
steps {
timeout (time: 5, unit: 'MINUTES') {
timeout (time: 7, unit: 'MINUTES') {
sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
}
}
......@@ -215,7 +215,7 @@ pipeline {
stage ("Start VM -- cppcheck") {
steps {
timeout (time: 5, unit: 'MINUTES') {
timeout (time: 7, unit: 'MINUTES') {
sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
}
}
......@@ -416,7 +416,7 @@ pipeline {
stage ("Test RF simulator") {
steps {
script {
timeout (time: 30, unit: 'MINUTES') {
timeout (time: 40, unit: 'MINUTES') {
try {
gitlabCommitStatus(name: "Test RF-sim") {
sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant rf-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
......
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -184,6 +184,8 @@ eNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -367,6 +367,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -188,6 +188,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -189,6 +189,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
///M2
target_mce_m2_ip_address = ( { ipv4 = "127.0.0.7";
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -145,6 +145,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -184,6 +184,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "CI_RCC_IP_ADDR";
ipv6 = "192:168:30::17";
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -192,6 +192,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -144,6 +144,8 @@ eNBs =
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
//SSB central frequency of NR secondary cell group (for ENDC NSA)
nr_scg_ssb_freq = 641272;
}
);
......@@ -190,6 +192,8 @@ eNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -183,6 +183,8 @@ eNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "CI_RCC_IP_ADDR";
ipv6 = "192:168:30::17";
......
......@@ -131,12 +131,12 @@ gNBs =
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPk2_0 = 6;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 2;
initialULBWPk2_1 = 6;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
......
......@@ -210,6 +210,8 @@ gNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "CI_FR1_CTL_ENB_IP_ADDR";
ipv6 = "192:168:30::17";
......
......@@ -184,6 +184,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -185,6 +185,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
target_mce_m2_ip_address = ( { ipv4 = "127.0.0.7";
......
......@@ -185,6 +185,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
target_mce_m2_ip_address = ( { ipv4 = "127.0.0.7";
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -150,6 +150,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -150,6 +150,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -150,6 +150,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -155,6 +155,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
......
......@@ -155,6 +155,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
......
......@@ -185,6 +185,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -765,6 +765,60 @@ function report_test {
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB </td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
#RA test (--do-ra option)
# Currently disabled
# #build log files names
# RA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_ra_test.log
# RA_UE_LOG=$ARCHIVES_LOC/ra_check_${TMODE}_${BW}prb_${CN_CONFIG}_ue_ra_test.log
# if [ -f $RA_ENB_LOG ] && [ -f $RA_UE_LOG ]
# then
# #get rid of full path
# NAME_ENB=`echo $RA_ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
# NAME_UE=`echo $RA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
# echo " <tr>" >> ./test_simulator_results.html
# echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
# echo " <td>Check if RA proc succeeded</td>" >> ./test_simulator_results.html
#
# #gNB RA check
# GNB_RECEIVED=`egrep -c "received correctly" $RA_ENB_LOG`
# GNB_CONNECTED=`egrep -c "now 5G connected" $RA_ENB_LOG`
# #UE RA check
# UE_RA_PROC_OK=`egrep -c "RA procedure succeeded" $RA_UE_LOG`
#
#
# if [ $GNB_RECEIVED -gt 0 ] && [ $GNB_CONNECTED -gt 0 ] && [ $UE_RA_PROC_OK -gt 0 ]
# then
# echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
# else
# echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
# fi
#
# echo " <td><pre>" >> ./test_simulator_results.html
# if [ $GNB_RECEIVED -gt 0 ]
# then
# echo "<font color = \"blue\">- gNB --> RA received</font>" >> ./test_simulator_results.html
# else
# echo "<font color = \"red\"><b>- gNB RA NOT RECEIVED</b></font>" >> ./test_simulator_results.html
# fi
# if [ $GNB_CONNECTED -gt 0 ]
# then
# echo "<font color = \"blue\">- gNB --> 5G connected</font>" >> ./test_simulator_results.html
# else
# echo "<font color = \"red\"><b>- gNB NOT 5G CONNECTED</b></font>" >> ./test_simulator_results.html
# fi
# if [ $UE_RA_PROC_OK -gt 0 ]
# then
# echo "<font color = \"blue\">- NR UE --> RA procedure succeded</font>" >> ./test_simulator_results.html
# else
# echo "<font color = \"red\"><b>- NR UE RA procedure failed</b></font>" >> ./test_simulator_results.html
# fi
# echo " </pre></td>" >> ./test_simulator_results.html
# echo " </tr>" >> ./test_simulator_results.html
# fi
#SYNC test
ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb.log
UE_LOG=`echo $ENB_LOG | sed -e "s#gnb#ue#"`
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
......
This diff is collapsed.
......@@ -1095,9 +1095,22 @@ add_library(FLEXRAN_AGENT
${OPENAIR2_DIR}/ENB_APP/flexran_agent_async.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac_internal.c
${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac_slice_verification.c
${OPENAIR2_DIR}/ENB_APP/flexran_agent_app.c
)
add_dependencies(FLEXRAN_AGENT rrc_flag)
set(FLEXRAN_AGENT_LIB FLEXRAN_AGENT)
add_library(flapp_sample SHARED
${OPENAIR2_DIR}/ENB_APP/flexran_apps/sample.c
)
set_target_properties(flapp_sample PROPERTIES C_VISIBILITY_PRESET hidden)
add_library(flapp_imsi SHARED
${OPENAIR2_DIR}/ENB_APP/flexran_apps/imsi.c
)
set_target_properties(flapp_imsi PROPERTIES C_VISIBILITY_PRESET hidden)
add_custom_target(flapp_all DEPENDS
flapp_sample
flapp_imsi
)
#include_directories(${OPENAIR2_DIR}/ENB_APP)
set(PROTOBUF_LIB "protobuf-c")
......@@ -2003,7 +2016,7 @@ add_dependencies(L2_UE rrc_flag s1ap_flag x2_flag)
add_library( NR_L2_UE ${NR_L2_SRC_UE} ${MAC_NR_SRC_UE} )
add_library( MAC_NR_COMMON ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c ${OPENAIR2_DIR}/LAYER2/NR_MAC_gNB/nr_compute_tbs_common.c)
add_library( MAC_NR_COMMON ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_compute_tbs_common.c)
include_directories("${OPENAIR2_DIR}/NR_UE_PHY_INTERFACE")
include_directories("${OPENAIR2_DIR}/LAYER2")
......@@ -2772,7 +2785,7 @@ if (NOT ${NOS1})
endif()
target_link_libraries (lte-uesoftmodem
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB M3AP_LIB M3AP_ENB F1AP F1AP_LIB
RRC_LIB NR_RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB M3AP_LIB M3AP_ENB F1AP F1AP_LIB
GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT MME_APP UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON
PHY_UE PHY_RU LFDS L2_UE L2_LTE LFDS7 SIMU_COMMON SIMU NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${ATLAS_LIBRARIES}
......@@ -2792,6 +2805,7 @@ add_executable(nr-softmodem
${s1ap_h}
# ${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_DIR}/executables/nr-gnb.c
${OPENAIR_DIR}/common/utils/threadPool/thread-pool.c
${OPENAIR_DIR}/executables/nr-ru.c
${OPENAIR_DIR}/executables/nr-softmodem.c
${OPENAIR_DIR}/executables/softmodem-common.c
......@@ -3023,12 +3037,15 @@ add_executable(nr_dlsim
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${NFAPI_USER_DIR}/nfapi.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_dlsim
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_NR -Wl,--end-group
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_NR HASHTABLE -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ${ITTI_LIB} dl
)
target_compile_definitions(nr_dlsim PUBLIC -DPHYSICAL_SIMULATOR)
......@@ -3039,14 +3056,18 @@ add_executable(nr_prachsim
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${NFAPI_USER_DIR}/nfapi.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES})
target_link_libraries(nr_prachsim
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB MAC_UE_NR SCHED_NR_UE_LIB RRC_LIB NR_RRC_LIB L2_NR CONFIG_LIB -Wl,--end-group m pthread ${ATLAS_LIBRARIES} ${T_LIB} ${ITTI_LIB} dl)
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB MAC_UE_NR SCHED_NR_UE_LIB RRC_LIB NR_RRC_LIB L2_NR CONFIG_LIB HASHTABLE -Wl,--end-group m pthread ${ATLAS_LIBRARIES} ${T_LIB} ${ITTI_LIB} dl)
add_executable(nr_ulschsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
${OPENAIR_DIR}/common/utils/threadPool/thread-pool.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
......@@ -3061,16 +3082,20 @@ target_link_libraries(nr_ulschsim
add_executable(nr_ulsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulsim.c
${OPENAIR_DIR}/common/utils/threadPool/thread-pool.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${NFAPI_USER_DIR}/nfapi.c
${UTIL_SRC}
${T_SOURCE}
${SHLIB_LOADER_SOURCES}
)
target_link_libraries(nr_ulsim
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR PHY_NR_COMMON PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_NR -Wl,--end-group
-Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR PHY_NR_COMMON PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_NR HASHTABLE -Wl,--end-group
m pthread ${ATLAS_LIBRARIES} ${T_LIB} ${ITTI_LIB} dl
)
target_compile_definitions(nr_ulsim PUBLIC -DPHYSICAL_SIMULATOR)
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -147,6 +147,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -149,6 +149,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -149,6 +149,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -149,6 +149,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -549,9 +549,10 @@ function main() {
# flash_firmware_iris
#fi
fi
echo_info "installing protobuf/protobuf-c for flexran agent support"
echo_info "Installing protobuf/protobuf-c for flexran agent support"
install_protobuf_from_source
install_protobuf_c_from_source
echo_success "protobuf/protobuf-c installation successful"
fi
if [ "$INSTALL_OPTIONAL" = "1" ] ; then
......@@ -647,14 +648,22 @@ function main() {
$build_dir coding \
libcoding.so $dbin/libcoding.so
compilations \
$build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
compilations \
$build_dir rb_tool \
rb_tool $dbin/rb_tool
cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
#check if we run inside a container or not
#IS_CONTAINER variable is defined in build_helper file
#compile nasmesh and rb_tool only if NOT running in a container
if [ $IS_CONTAINER -eq 0 ]
then
compilations \
$build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
compilations \
$build_dir rb_tool \
rb_tool $dbin/rb_tool
cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
fi #IS_CONTAINER
fi
fi
......@@ -662,9 +671,16 @@ function main() {
if [ "$UE" = 1 ] ; then
echo_info "Compiling UE specific part"
compilations \
$build_dir ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
if [ $IS_CONTAINER -eq 0 ]
then
echo_info "Building ue_ip module"
compilations \
$build_dir ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
else
echo_info "Bypassing ue_ip build"
fi #IS_CONTAINER
# mkdir -p $DIR/at_commands/build
# cd $DIR/at_commands/build
......
cmake_minimum_required(VERSION 2.8)
project (OpenAirInterface)
set ( CMAKE_BUILD_TYPE )
set ( CFLAGS_PROCESSOR_USER "" )
set ( UE_EXPANSION False )
set ( PRE_SCD_THREAD False )
set ( UESIM_EXPANSION False )
set ( ENABLE_VCD_FIFO False )
set ( RF_BOARD "OAI_USRP")
set ( RF_BOARD "None")
set ( TRANSP_PRO "None")
set ( PACKAGE_NAME "")
set ( DEADLINE_SCHEDULER "False" )
......
......@@ -40,7 +40,15 @@ esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
SUDO='sudo -E'
#check if we run inside a container
IS_CONTAINER=`egrep -c "docker|podman|kubepods" /proc/self/cgroup || true`
#sudo is not needed inside a container
if [ $IS_CONTAINER -eq 0 ]
then
SUDO='sudo -S -E'
else
SUDO=''
fi
###############################
## echo and family
......@@ -104,6 +112,8 @@ check_supported_distribution() {
"rhel7") return 0 ;;
"rhel7.6") return 0 ;;
"rhel7.7") return 0 ;;
"rhel7.8") return 0 ;;
"rhel8.2") return 0 ;;
"centos7") return 0 ;;
esac
return 1
......@@ -241,15 +251,30 @@ install_protobuf_from_source(){
#wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
#tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
#cd protobuf-2.6.1/
rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
wget --tries=3 --retry-connrefused https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
cd protobuf-3.3.0/
./configure
echo "Compiling protobuf"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
if [ $IS_CONTAINER -eq 0 ]
then
rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
wget --tries=3 --retry-connrefused https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
cd protobuf-3.3.0/
./configure
echo "Compiling protobuf"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
else
export LD_LIBRARY_PATH=/usr/local/lib #protoc needs to know where toclook for shared libs
rm -rf /tmp/protobuf
git clone --depth=1 --branch=v3.3.0 https://github.com/protocolbuffers/protobuf.git /tmp/protobuf
cd /tmp/protobuf
git submodule update --init --recursive
./autogen.sh
./configure
make -j`nproc`
make install
ldconfig
fi
) >& $protobuf_install_log
}
......@@ -279,12 +304,12 @@ install_usrp_uhd_driver_from_source(){
uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
(
cd /tmp
pushd /tmp
echo "Downloading UHD driver"
rm -rf /tmp/uhd
git clone https://github.com/EttusResearch/uhd.git
cd uhd
git checkout tags/v3.13.0.2
git checkout tags/v4.0.0.0
mkdir -p host/build
cd host/build
$CMAKE ../
......@@ -292,7 +317,9 @@ install_usrp_uhd_driver_from_source(){
make -j`nproc`
make test
$SUDO make install
$SUDO ldconfig
$SUDO ldconfig -v
popd
rm -rf /tmp/uhd
) >& $uhd_install_log
}
......@@ -324,11 +351,20 @@ check_install_usrp_uhd_driver(){
$SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y install libuhd-dev libuhd003 uhd-host
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
$SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
$SUDO -H pip install requests
if [ $IS_CONTAINER -eq 0 ]
then
$SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
$SUDO -H pip install requests
else
$SUDO $INSTALLER -y install boost boost-devel cmake3
$SUDO pip3 install mako requests
fi
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
# until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
$SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
if [ $IS_CONTAINER -eq 0 ]
then
# until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
$SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
fi
install_usrp_uhd_driver_from_source
else
$SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
......@@ -750,6 +786,8 @@ check_install_oai_software() {
libxml2 \
libxml2-devel \
libxslt-devel \
ninja-build \
make \
openssh-clients \
openssh-server \
openssl \
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -100,13 +100,37 @@ Some other useful paramters of the UE are
- --clock-source: sets the clock-source (internal or external).
- --time-source: sets the time-source (internal or external).
## noS1 setup with OAI UE
Instead of randomly generated payload, in the phy-test mode we can also inject/receive user-plane traffic over a TUN interface. This is the so-called noS1 mode.
This setup is described in the [rfsimulator page](../targets/ARCH/rfsimulator/README.md#5g-case). In theory this should also work with the real hardware target although this has yet to be tested.
## do-ra setup with OAI
The do-ra flag is used to ran the NR Random Access procedures in contention-free mode. Currently OAI implements the RACH process from Msg1 to Msg3.
In order to run the RA, the following flag is needed for both the gNB and the UE:
`--do-ra`
### Run OAI in do-ra mode
From the `cmake_targets/ran_build/build` folder:
gNB on machine 1:
`sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --do-ra`
UE on machine 2:
`sudo ./nr-uesoftmodem --do-ra`
With the RF simulator (on the same machine):
`sudo RFSIMULATOR=gnb ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --do-ra --rfsim --parallel-config PARALLEL_SINGLE_THREAD`
`sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --do-ra --rfsim --parallel-config PARALLEL_SINGLE_THREAD`
[oai wiki home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)
......
STATUS 2020/09/10 : updated the status of interop (end to end UL/DL traffic)
STATUS 2020/10/15 : added External Resources section and links
## Table of Contents ##
1. [Configuration Overview](#configuration-overview)
2. [SW Repository / Branch](#repository)
3. [Architecture Setup](#architecture-setup)
4. [Build / Install](#build-and-install)
5. [Run / Test](#run-and-test)
6. [Test case](#test-case)
7. [Log file monitoring](#log-file-monitoring)
6. [Required tools for debug](#required-tools-for-debug)
7. [Status of interoperability](#status-of-interoperability)
8. [CI integration](#ci-integration)
1. [External Resources](#external-resources)
2. [Configuration Overview](#configuration-overview)
3. [SW Repository / Branch](#repository)
4. [Architecture Setup](#architecture-setup)
5. [Build / Install](#build-and-install)
6. [Run / Test](#run-and-test)
7. [Test case](#test-case)
8. [Log file monitoring](#log-file-monitoring)
9. [Required tools for debug](#required-tools-for-debug)
10. [Status of interoperability](#status-of-interoperability)
11. [CI integration](#ci-integration)
## External Resources
Additional Resources to this page can be found here (special mention to Walter Maguire <wmaguire@live.com>) :
https://docs.google.com/document/d/1pL8Szm0ocGxdl5ESVp12Ff71a4PbhCb9SpvbLZzwYbo/edit?usp=sharing
At time of writing, the openairinterface5G Commit Tag is 2020.w39
Faraday Cages can be found here :
http://www.saelig.com/MFR00066/ste2300.htm
## Configuration Overview
......
......@@ -187,6 +187,8 @@ eNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
......
......@@ -212,6 +212,8 @@ gNBs =
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "192.168.18.199";
ipv6 = "192:168:30::17";
......
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL7 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:latest AS enb-build
WORKDIR /oai-enb
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --eNB
#start from scratch for target executable
FROM registry.access.redhat.com/ubi7/ubi:latest as oai-enb
# Entitlements and RHSM configurations are Open-Shift Secret and ConfigMaps
# It is pre-requisite
RUN rm -Rf /etc/rhsm/ca /etc/pki/entitlement
# Copy the entitlements
COPY ./etc-pki-entitlement /etc/pki/entitlement
# Copy the subscription manager configurations
COPY ./rhsm-conf /etc/rhsm
COPY ./rhsm-ca /etc/rhsm/ca
#install developers pkg/repo
RUN rm /etc/rhsm-host && \
# Initialize /etc/yum.repos.d/redhat.repo
# See https://access.redhat.com/solutions/1443553
yum repolist --disablerepo=* && \
yum-config-manager --enable rhel-7-server-optional-rpms rhel-server-rhscl-7-rpms && \
yum update -y && \
yum install -y \
lksctp-tools \
protobuf-c \
nettle \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-enb/bin
COPY --from=enb-build /oai-enb/targets/bin/lte-softmodem.Rel15 .
RUN ldd lte-softmodem.Rel15
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-enb/bin/lte-softmodem", "-O", "/opt/oai-enb/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM localhost/ran-build:latest AS enb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --eNB --ninja -w USRP
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
#RUN ls -ls /oai-ran/targets/bin
#RUN ls -ls /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-enb
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
net-tools \
iproute \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-enb/bin
COPY --from=enb-build /oai-ran/targets/bin/lte-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=enb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=enb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=enb-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=enb-build /lib64/libconfig.so.9 /lib64
COPY --from=enb-build /lib64/libblas.so.3 /lib64
COPY --from=enb-build /lib64/liblapack.so.3 /lib64
COPY --from=enb-build /lib64/liblapacke.so.3 /lib64
COPY --from=enb-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=enb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/liboai_iqplayer.so
#RUN ldd /opt/oai-enb/bin/lte-softmodem.Rel15
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-enb/etc
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/enb.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rcc.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/cu.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/du.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rru.* .
WORKDIR /opt/oai-enb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-enb/bin/lte-softmodem", "-O", "/opt/oai-enb/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:rhel8-latest AS enb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --eNB --ninja -w USRP
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
#RUN ls -ls /oai-ran/targets/bin
#RUN ls -ls /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-enb
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
net-tools \
iproute \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-enb/bin
COPY --from=enb-build /oai-ran/targets/bin/lte-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=enb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=enb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=enb-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=enb-build /lib64/libconfig.so.9 /lib64
COPY --from=enb-build /lib64/libblas.so.3 /lib64
COPY --from=enb-build /lib64/liblapack.so.3 /lib64
COPY --from=enb-build /lib64/liblapacke.so.3 /lib64
COPY --from=enb-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=enb-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=enb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
RUN ldd /usr/local/lib/librfsimulator.so.Rel15
RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
RUN ldd /usr/local/lib/libcoding.so
RUN ldd /usr/local/lib/libparams_libconfig.so
RUN ldd /usr/local/lib/libdfts.so
RUN ldd /usr/local/lib/liboai_iqplayer.so
RUN ldd /opt/oai-enb/bin/lte-softmodem.Rel15
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-enb/etc
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/enb.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rcc.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/cu.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/du.* .
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rru.* .
WORKDIR /opt/oai-enb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-enb/bin/lte-softmodem", "-O", "/opt/oai-enb/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu 18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS enb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --eNB --ninja -w USRP
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
#RUN ls -ls /oai-ran/targets/bin
#RUN ls -ls /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM ubuntu:bionic as oai-enb
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
software-properties-common \
libsctp1 \
libnettle6 \
libblas3 \
libatlas3-base \
libconfig9 \
openssl \
net-tools \
iproute2 \
libyaml-0-2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-enb/bin
COPY --from=enb-build /oai-ran/targets/bin/lte-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=enb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=enb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=enb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=enb-build /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=enb-build /usr/local/lib/libprotobuf-c.so.1 .
RUN ldconfig
#debug
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/liboai_iqplayer.so
#RUN ldd /opt/oai-enb/bin/lte-softmodem.Rel15
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-enb/etc
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/enb.* ./
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rcc.* ./
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/cu.* ./
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/du.* ./
COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rru.* ./
WORKDIR /opt/oai-enb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-enb/bin/lte-softmodem", "-O", "/opt/oai-enb/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL7 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:latest AS gnb-build
WORKDIR /oai-gnb
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --gNB
#start from scratch for target executable
FROM registry.access.redhat.com/ubi7/ubi:latest as oai-gnb
# Entitlements and RHSM configurations are Open-Shift Secret and ConfigMaps
# It is pre-requisite
RUN rm -Rf /etc/rhsm/ca /etc/pki/entitlement
# Copy the entitlements
COPY ./etc-pki-entitlement /etc/pki/entitlement
# Copy the subscription manager configurations
COPY ./rhsm-conf /etc/rhsm
COPY ./rhsm-ca /etc/rhsm/ca
#install developers pkg/repo
RUN rm /etc/rhsm-host && \
# Initialize /etc/yum.repos.d/redhat.repo
# See https://access.redhat.com/solutions/1443553
yum repolist --disablerepo=* && \
yum-config-manager --enable rhel-7-server-optional-rpms rhel-server-rhscl-7-rpms && \
yum update -y && \
yum install -y \
libXpm \
libX11 \
atlas \
blas \
lapack \
lksctp-tools \
protobuf-c \
nettle \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build /oai-gnb/targets/bin/nr-softmodem.Rel15 .
WORKDIR /lib64
COPY --from=gnb-build /lib64/libforms.so.2 .
RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM localhost/ran-build:latest AS gnb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --gNB --ninja -w USRP
#debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-gnb
RUN yum repolist --disablerepo=* && \
yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
libXpm \
libX11 \
atlas \
lksctp-tools \
nettle \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=gnb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=gnb-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=gnb-build /lib64/libconfig.so.9 /lib64
COPY --from=gnb-build /lib64/libforms.so.2 /lib64
COPY --from=gnb-build /lib64/libblas.so.3 /lib64
COPY --from=gnb-build /lib64/liblapack.so.3 /lib64
COPY --from=gnb-build /lib64/liblapacke.so.3 /lib64
COPY --from=gnb-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=gnb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
#RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/libldpc.so
#RUN ldd /usr/local/lib/libldpc_optim.so
#RUN ldd /usr/local/lib/libldpc_optim8seg.so
#RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for gNB
WORKDIR /opt/oai-gnb/etc
COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* .
WORKDIR /opt/oai-gnb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:rhel8-latest AS gnb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --gNB --ninja -w USRP
#debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-gnb
RUN yum repolist --disablerepo=* && \
yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
libXpm \
libX11 \
atlas \
lksctp-tools \
nettle \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=gnb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=gnb-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=gnb-build /lib64/libconfig.so.9 /lib64
COPY --from=gnb-build /lib64/libforms.so.2 /lib64
COPY --from=gnb-build /lib64/libblas.so.3 /lib64
COPY --from=gnb-build /lib64/liblapack.so.3 /lib64
COPY --from=gnb-build /lib64/liblapacke.so.3 /lib64
COPY --from=gnb-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=gnb-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=gnb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
RUN ldd /usr/local/lib/librfsimulator.so.Rel15
RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
RUN ldd /usr/local/lib/libcoding.so
RUN ldd /usr/local/lib/libparams_libconfig.so
RUN ldd /usr/local/lib/libdfts.so
RUN ldd /usr/local/lib/libldpc.so
RUN ldd /usr/local/lib/libldpc_optim.so
RUN ldd /usr/local/lib/libldpc_optim8seg.so
RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for gNB
WORKDIR /opt/oai-gnb/etc
COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* .
WORKDIR /opt/oai-gnb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS gnb-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --gNB --ninja -w USRP
#debug
RUN ldconfig -v
RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
RUN ls -lst /oai-ran/targets/bin
RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM ubuntu:bionic as oai-gnb
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
software-properties-common \
libsctp1 \
libnettle6 \
libblas3 \
libatlas3-base \
libconfig9 \
openssl \
net-tools \
iproute2 \
libyaml-0-2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=gnb-build /oai-ran/targets/bin/libcoding.so .
COPY --from=gnb-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=gnb-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=gnb-build /usr/local/lib/libprotobuf-c.so.1 .
RUN ldconfig
#debug
#RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/libldpc.so
#RUN ldd /usr/local/lib/libldpc_optim.so
#RUN ldd /usr/local/lib/libldpc_optim8seg.so
#RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for gNB
WORKDIR /opt/oai-gnb/etc
COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* ./
WORKDIR /opt/oai-gnb
#EXPOSE 2152/udp # S1U, GTP/UDP
#EXPOSE 22100/tcp # ?
#EXPOSE 36412/udp # S1C, SCTP/UDP
#EXPOSE 36422/udp # X2C, SCTP/UDP
#EXPOSE 50000/udp # IF5 / ORI (control)
#EXPOSE 50001/udp # IF5 / ECPRI (data)
#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM localhost/ran-build:latest AS lte-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --UE --ninja -w USRP
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ue
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
iproute \
net-tools \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-lte-ue/bin
COPY --from=lte-ue-build /oai-ran/targets/bin/lte-uesoftmodem.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/conf2uedata .
COPY --from=lte-ue-build /oai-ran/targets/bin/nvram .
COPY --from=lte-ue-build /oai-ran/targets/bin/usim .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue_emm.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.usim.nvram0 .
WORKDIR /usr/local/lib/
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=lte-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libSIMU.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=lte-ue-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=lte-ue-build /lib64/libconfig.so.9 /lib64
COPY --from=lte-ue-build /lib64/libblas.so.3 /lib64
COPY --from=lte-ue-build /lib64/liblapack.so.3 /lib64
COPY --from=lte-ue-build /lib64/liblapacke.so.3 /lib64
COPY --from=lte-ue-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=lte-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
#RUN ldd /opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15
#RUN ldd /opt/oai-lte-ue/bin/conf2uedata
#RUN ldd /opt/oai-lte-ue/bin/nvram
#RUN ldd /opt/oai-lte-ue/bin/usim
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libSIMU.so
#RUN ldd /usr/local/lib/libdfts.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-lte-ue/etc
COPY --from=lte-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
WORKDIR /opt/oai-lte-ue
#CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem", "-O", "/opt/oai-lte-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:rhel8-latest AS lte-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --UE --ninja -w USRP
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ue
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
iproute \
net-tools \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-lte-ue/bin
COPY --from=lte-ue-build /oai-ran/targets/bin/lte-uesoftmodem.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/conf2uedata .
COPY --from=lte-ue-build /oai-ran/targets/bin/nvram .
COPY --from=lte-ue-build /oai-ran/targets/bin/usim .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue_emm.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.usim.nvram0 .
WORKDIR /usr/local/lib/
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=lte-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libSIMU.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=lte-ue-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=lte-ue-build /lib64/libconfig.so.9 /lib64
COPY --from=lte-ue-build /lib64/libblas.so.3 /lib64
COPY --from=lte-ue-build /lib64/liblapack.so.3 /lib64
COPY --from=lte-ue-build /lib64/liblapacke.so.3 /lib64
COPY --from=lte-ue-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=lte-ue-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=lte-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#debug
RUN ldd /opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15
RUN ldd /opt/oai-lte-ue/bin/conf2uedata
RUN ldd /opt/oai-lte-ue/bin/nvram
RUN ldd /opt/oai-lte-ue/bin/usim
RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
RUN ldd /usr/local/lib/librfsimulator.so.Rel15
RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
RUN ldd /usr/local/lib/libcoding.so
RUN ldd /usr/local/lib/libparams_libconfig.so
RUN ldd /usr/local/lib/libSIMU.so
RUN ldd /usr/local/lib/libdfts.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-lte-ue/etc
COPY --from=lte-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
WORKDIR /opt/oai-lte-ue
#CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem", "-O", "/opt/oai-lte-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS lte-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --UE --ninja -w USRP
# debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM ubuntu:bionic as oai-lte-ue
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
software-properties-common \
libsctp1 \
libnettle6 \
liblapacke \
libatlas3-base \
libconfig9 \
openssl \
net-tools \
iproute2 \
libyaml-0-2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-lte-ue/bin
COPY --from=lte-ue-build /oai-ran/targets/bin/lte-uesoftmodem.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/conf2uedata .
COPY --from=lte-ue-build /oai-ran/targets/bin/nvram .
COPY --from=lte-ue-build /oai-ran/targets/bin/usim .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue_emm.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.ue.nvram0 .
COPY --from=lte-ue-build /oai-ran/targets/bin/.usim.nvram0 .
WORKDIR /usr/local/lib/
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=lte-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=lte-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libSIMU.so .
COPY --from=lte-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=lte-ue-build /usr/local/lib/libprotobuf-c.so.1 .
RUN ldconfig
#debug
#RUN ldd /opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15
#RUN ldd /opt/oai-lte-ue/bin/conf2uedata
#RUN ldd /opt/oai-lte-ue/bin/nvram
#RUN ldd /opt/oai-lte-ue/bin/usim
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libSIMU.so
#RUN ldd /usr/local/lib/libdfts.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-lte-ue/etc
COPY --from=lte-ue-build /oai-ran/ci-scripts/conf_files/ue.* ./
WORKDIR /opt/oai-lte-ue
#CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem", "-O", "/opt/oai-lte-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM localhost/ran-build:latest AS nr-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --nrUE --ninja -w USRP
# debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/nr-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-nr-ue
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
libXpm \
libX11 \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-nr-ue/bin
COPY --from=nr-ue-build /oai-ran/targets/bin/nr-uesoftmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=nr-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=nr-ue-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=nr-ue-build /lib64/libconfig.so.9 /lib64
COPY --from=nr-ue-build /lib64/libblas.so.3 /lib64
COPY --from=nr-ue-build /lib64/liblapack.so.3 /lib64
COPY --from=nr-ue-build /lib64/liblapacke.so.3 /lib64
COPY --from=nr-ue-build /lib64/libforms.so.2 /lib64
COPY --from=nr-ue-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=nr-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
#RUN ldd /opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/libldpc.so
#RUN ldd /usr/local/lib/libldpc_optim.so
#RUN ldd /usr/local/lib/libldpc_optim8seg.so
#RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-nr-ue/etc
COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
WORKDIR /opt/oai-nr-ue
#CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM image-registry.openshift-image-registry.svc:5000/oai/oai-ran:rhel8-latest AS nr-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --nrUE --ninja -w USRP
# debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/nr-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-nr-ue
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
libXpm \
libX11 \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-nr-ue/bin
COPY --from=nr-ue-build /oai-ran/targets/bin/nr-uesoftmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=nr-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=nr-ue-build /usr/local/lib/libprotobuf-c.so.1 .
COPY --from=nr-ue-build /lib64/libconfig.so.9 /lib64
COPY --from=nr-ue-build /lib64/libblas.so.3 /lib64
COPY --from=nr-ue-build /lib64/liblapack.so.3 /lib64
COPY --from=nr-ue-build /lib64/liblapacke.so.3 /lib64
COPY --from=nr-ue-build /lib64/libforms.so.2 /lib64
COPY --from=nr-ue-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=nr-ue-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=nr-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN ldconfig
RUN ldd /opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15
RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
RUN ldd /usr/local/lib/librfsimulator.so.Rel15
RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
RUN ldd /usr/local/lib/libcoding.so
RUN ldd /usr/local/lib/libparams_libconfig.so
RUN ldd /usr/local/lib/libdfts.so
RUN ldd /usr/local/lib/libldpc.so
RUN ldd /usr/local/lib/libldpc_optim.so
RUN ldd /usr/local/lib/libldpc_optim8seg.so
RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-nr-ue/etc
COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
WORKDIR /opt/oai-nr-ue
#CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu 18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS nr-ue-build
WORKDIR /oai-ran
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --nrUE --ninja -w USRP
# debug
#RUN ldconfig -v
#RUN ldd /oai-ran/targets/bin/nr-uesoftmodem.Rel15
#RUN ls -lst /oai-ran/targets/bin
#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
#start from scratch for target executable
FROM ubuntu:bionic as oai-nr-ue
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
software-properties-common \
libsctp1 \
libnettle6 \
liblapacke \
libatlas3-base \
libconfig9 \
openssl \
net-tools \
iproute2 \
libyaml-0-2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-nr-ue/bin
COPY --from=nr-ue-build /oai-ran/targets/bin/nr-uesoftmodem.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=nr-ue-build /oai-ran/targets/bin/libcoding.so .
COPY --from=nr-ue-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so .
COPY --from=nr-ue-build /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so"
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so"
RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so"
COPY --from=nr-ue-build /usr/local/lib/libprotobuf-c.so.1 .
RUN ldconfig
#debug
#RUN ldd /opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15
#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
#RUN ldd /usr/local/lib/libcoding.so
#RUN ldd /usr/local/lib/libparams_libconfig.so
#RUN ldd /usr/local/lib/libdfts.so
#RUN ldd /usr/local/lib/libldpc.so
#RUN ldd /usr/local/lib/libldpc_optim.so
#RUN ldd /usr/local/lib/libldpc_optim8seg.so
#RUN ldd /usr/local/lib/libldpc_orig.so
# Copy the relevant configuration files for eNB
WORKDIR /opt/oai-nr-ue/etc
COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
WORKDIR /opt/oai-nr-ue
#CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/enb.conf"]
#ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL7 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM registry.access.redhat.com/ubi7/ubi:latest AS ran-build
# Entitlements and RHSM configurations are Open-Shift Secret and ConfigMaps
# It is pre-requisite
RUN rm -Rf /etc/rhsm/ca /etc/pki/entitlement
# Copy the entitlements
COPY ./etc-pki-entitlement /etc/pki/entitlement
# Copy the subscription manager configurations
COPY ./rhsm-conf /etc/rhsm
COPY ./rhsm-ca /etc/rhsm/ca
#install developers pkg/repo
RUN rm /etc/rhsm-host && \
# Initialize /etc/yum.repos.d/redhat.repo
# See https://access.redhat.com/solutions/1443553
yum repolist --disablerepo=* && \
yum-config-manager --enable rhel-7-server-optional-rpms rhel-server-rhscl-7-rpms && \
yum update -y && \
yum install -y \
#gcc needed for build_oai
gcc gcc-c++ \
diffutils \
file \
psmisc \
git \
#unzip is needed for protobuf
unzip && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf
# In some network environments, GIT proxy is required
RUN /bin/bash -c "if [[ -v NEEDED_GIT_PROXY ]]; then git config --global http.proxy $NEEDED_GIT_PROXY; fi"
#create the WORKDIR
WORKDIR /oai-ran
COPY . .
#run build_oai -I to get the builder image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai -I
#as the image is public, we need to remove the subscription manager configurations
#RUN rm -Rf /etc/rhsm /etc/pki/entitlement
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM registry.access.redhat.com/ubi8/ubi:latest AS ran-build
ARG NEEDED_GIT_PROXY
COPY tmp/ca/redhat-uep.pem /etc/rhsm/ca
COPY tmp/entitlement/*.pem /etc/pki/entitlement
#install developers pkg/repo
RUN rm -f /etc/rhsm-host && \
yum repolist --disablerepo=* && \
subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms && \
yum update -y && \
yum install -y \
#gcc needed for build_oai
gcc gcc-c++ \
diffutils \
file \
psmisc \
git \
#unzip is needed for protobuf
unzip && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
# In some network environments, GIT proxy is required
RUN /bin/bash -c "if [[ -v NEEDED_GIT_PROXY ]]; then git config --global http.proxy $NEEDED_GIT_PROXY; fi"
#create the WORKDIR
WORKDIR /oai-ran
COPY . .
#run build_oai -I to get the builder image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai -I -w USRP
RUN rm /etc/pki/entitlement/*pem
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8 in the OpenShift context (v4.4)
#
#---------------------------------------------------------------------
FROM registry.access.redhat.com/ubi8/ubi:latest AS ran-build
# Entitlements and RHSM configurations are Open-Shift Secret and ConfigMaps
# It is pre-requisite
RUN rm -Rf /etc/rhsm/ca /etc/pki/entitlement
# Copy the entitlements
COPY ./etc-pki-entitlement /etc/pki/entitlement
# Copy the subscription manager configurations
COPY ./rhsm-conf /etc/rhsm
COPY ./rhsm-ca /etc/rhsm/ca
#install developers pkg/repo
RUN rm /etc/rhsm-host && \
# Initialize /etc/yum.repos.d/redhat.repo
# See https://access.redhat.com/solutions/1443553
yum repolist --disablerepo=* && \
subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms && \
yum update -y && \
yum install -y \
#gcc needed for build_oai
gcc gcc-c++ \
diffutils \
file \
psmisc \
git \
#unzip is needed for protobuf
unzip && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
# In some network environments, GIT proxy is required
RUN /bin/bash -c "if [[ -v NEEDED_GIT_PROXY ]]; then git config --global http.proxy $NEEDED_GIT_PROXY; fi"
#create the WORKDIR
WORKDIR /oai-ran
COPY . .
#run build_oai -I to get the builder image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai -I -w USRP
#as the image is public, we need to remove the subscription certificates
RUN rm -Rf /etc/pki/entitlement/*.pem
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu 18.04
#
#---------------------------------------------------------------------
FROM ubuntu:bionic AS ran-build
ARG NEEDED_GIT_PROXY
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
#install developers pkg/repo
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
#gcc needed for build_oai
build-essential \
psmisc \
git \
xxd \
#unzip is needed for protobuf
unzip
# In some network environments, GIT proxy is required
RUN /bin/bash -c "if [[ -v NEEDED_GIT_PROXY ]]; then git config --global http.proxy $NEEDED_GIT_PROXY; fi"
#create the WORKDIR
WORKDIR /oai-ran
COPY . .
#run build_oai -I to get the builder image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai -I -w USRP
---
to be done
---
......@@ -179,7 +179,7 @@ void prach_eNB_tosplit(uint8_t *bufferZone, int bufSize, PHY_VARS_eNB *eNB, L1_r
ru=eNB->RU_list[i];
for (ru_aa=0,aa=0; ru_aa<ru->nb_rx; ru_aa++,aa++) {
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[i]->prach_rxsigF[ru_aa];
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[i]->prach_rxsigF[0][ru_aa];
int ce_level;
for (ce_level=0; ce_level<4; ce_level++)
......
......@@ -228,7 +228,7 @@ void init_eNB_afterRU(void) {
for (int i=0; i<eNB->RU_list[ru_id]->nb_rx; aa++,i++) {
LOG_I(PHY,"Attaching RU %d antenna %d to eNB antenna %d\n",eNB->RU_list[ru_id]->idx,i,aa);
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[ru_id]->prach_rxsigF[i];
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[ru_id]->prach_rxsigF[0][i];
for (int ce_level=0; ce_level<4; ce_level++)
eNB->prach_vars_br.rxsigF[ce_level][aa] = eNB->RU_list[ru_id]->prach_rxsigF_br[ce_level][i];
......@@ -483,7 +483,7 @@ void prach_procedures_ocp(PHY_VARS_eNB *eNB, L1_rxtx_proc_t *proc, int br_flag)
ru=eNB->RU_list[i];
for (ru_aa=0,aa=0; ru_aa<ru->nb_rx; ru_aa++,aa++) {
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[i]->prach_rxsigF[ru_aa];
eNB->prach_vars.rxsigF[0][aa] = eNB->RU_list[i]->prach_rxsigF[0][ru_aa];
int ce_level;
if (br_flag==1)
......
......@@ -139,7 +139,6 @@ extern void add_subframe(uint16_t *frameP, uint16_t *subframeP, int offset);
//#define TICK_TO_US(ts) (ts.diff)
#define TICK_TO_US(ts) (ts.trials==0?0:ts.diff/ts.trials)
static inline int rxtx(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int frame_tx, int slot_tx, char *thread_name) {
sl_ahead = sf_ahead*gNB->frame_parms.slots_per_subframe;
......@@ -178,6 +177,59 @@ static inline int rxtx(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int frame_t
T(T_GNB_PHY_DL_TICK, T_INT(gNB->Mod_id), T_INT(frame_tx), T_INT(slot_tx));
/* hack to remove UEs */
extern int rnti_to_remove[10];
extern volatile int rnti_to_remove_count;
extern pthread_mutex_t rnti_to_remove_mutex;
if (pthread_mutex_lock(&rnti_to_remove_mutex)) exit(1);
int up_removed = 0;
int down_removed = 0;
int pucch_removed = 0;
for (int i = 0; i < rnti_to_remove_count; i++) {
LOG_W(PHY, "to remove rnti %d\n", rnti_to_remove[i]);
void clean_gNB_ulsch(NR_gNB_ULSCH_t *ulsch);
void clean_gNB_dlsch(NR_gNB_DLSCH_t *dlsch);
int j;
for (j = 0; j < NUMBER_OF_NR_ULSCH_MAX; j++)
if (gNB->ulsch[j][0]->rnti == rnti_to_remove[i]) {
gNB->ulsch[j][0]->rnti = 0;
gNB->ulsch[j][0]->harq_mask = 0;
//clean_gNB_ulsch(gNB->ulsch[j][0]);
int h;
for (h = 0; h < NR_MAX_ULSCH_HARQ_PROCESSES; h++) {
gNB->ulsch[j][0]->harq_processes[h]->status = SCH_IDLE;
gNB->ulsch[j][0]->harq_processes[h]->round = 0;
gNB->ulsch[j][0]->harq_processes[h]->handled = 0;
}
up_removed++;
}
for (j = 0; j < NUMBER_OF_NR_DLSCH_MAX; j++)
if (gNB->dlsch[j][0]->rnti == rnti_to_remove[i]) {
gNB->dlsch[j][0]->rnti = 0;
gNB->dlsch[j][0]->harq_mask = 0;
//clean_gNB_dlsch(gNB->dlsch[j][0]);
down_removed++;
}
for (j = 0; j < NUMBER_OF_NR_PUCCH_MAX; j++)
if (gNB->pucch[j]->active > 0 &&
gNB->pucch[j]->pucch_pdu.rnti == rnti_to_remove[i]) {
gNB->pucch[j]->active = 0;
gNB->pucch[j]->pucch_pdu.rnti = 0;
pucch_removed++;
}
#if 0
for (j = 0; j < NUMBER_OF_NR_PDCCH_MAX; j++)
gNB->pdcch_pdu[j].frame = -1;
for (j = 0; j < NUMBER_OF_NR_PDCCH_MAX; j++)
gNB->ul_pdcch_pdu[j].frame = -1;
for (j = 0; j < NUMBER_OF_NR_PRACH_MAX; j++)
gNB->prach_vars.list[j].frame = -1;
#endif
}
if (rnti_to_remove_count) LOG_W(PHY, "to remove rnti_to_remove_count=%d, up_removed=%d down_removed=%d pucch_removed=%d\n", rnti_to_remove_count, up_removed, down_removed, pucch_removed);
rnti_to_remove_count = 0;
if (pthread_mutex_unlock(&rnti_to_remove_mutex)) exit(1);
/*
// if this is IF5 or 3GPP_gNB
if (gNB && gNB->RU_list && gNB->RU_list[0] && gNB->RU_list[0]->function < NGFI_RAU_IF4p5) {
......@@ -203,11 +255,7 @@ static inline int rxtx(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int frame_t
// TODO: check if this is correct for PARALLEL_RU_L1_TRX_SPLIT
// Do PRACH RU processing
int prach_id=find_nr_prach(gNB,frame_rx,slot_rx,0,SEARCH_EXIST);
if (prach_id>=0) {
L1_nr_prach_procedures(gNB,frame_rx,slot_rx,&gNB->prach_vars.list[prach_id].pdu);
gNB->prach_vars.list[prach_id].frame=-1;
}
L1_nr_prach_procedures(gNB,frame_rx,slot_rx);
phy_procedures_gNB_uespec_RX(gNB, frame_rx, slot_rx);
}
......@@ -545,6 +593,8 @@ int wakeup_rxtx(PHY_VARS_gNB *gNB,RU_t *ru) {
int i;
struct timespec abstime;
int time_ns = 50000;
int wait_timer = 0;
bool do_last_check = 1;
AssertFatal((ret=pthread_mutex_lock(&proc->mutex_RU))==0,"mutex_lock returns %d\n",ret);
for (i=0; i<gNB->num_RU; i++) {
......@@ -565,22 +615,36 @@ int wakeup_rxtx(PHY_VARS_gNB *gNB,RU_t *ru) {
AssertFatal((ret=pthread_mutex_unlock(&proc->mutex_RU))==0,"muex_unlock returns %d\n",ret);
}
clock_gettime(CLOCK_REALTIME, &abstime);
abstime.tv_nsec = abstime.tv_nsec + time_ns;
if (abstime.tv_nsec >= 1000*1000*1000) {
abstime.tv_nsec -= 1000*1000*1000;
abstime.tv_sec += 1;
}
// wake up TX for subframe n+sf_ahead
// lock the TX mutex and make sure the thread is ready
AssertFatal((ret=pthread_mutex_timedlock(&L1_proc->mutex, &abstime)) == 0,"mutex_lock returns %d\n", ret);
while (wait_timer < 200) {
clock_gettime(CLOCK_REALTIME, &abstime);
abstime.tv_nsec = abstime.tv_nsec + time_ns;
if (L1_proc->instance_cnt == 0) { // L1_thread is busy so abort the subframe
AssertFatal((ret=pthread_mutex_unlock( &L1_proc->mutex))==0,"muex_unlock return %d\n",ret);
LOG_W(PHY,"L1_thread isn't ready in %d.%d, aborting RX processing\n",ru_proc->frame_rx,ru_proc->tti_rx);
return(-1);
if (abstime.tv_nsec >= 1000*1000*1000) {
abstime.tv_nsec -= 1000*1000*1000;
abstime.tv_sec += 1;
}
AssertFatal((ret=pthread_mutex_timedlock(&L1_proc->mutex, &abstime)) == 0,"mutex_lock returns %d\n", ret);
if (L1_proc->instance_cnt == 0) { // L1_thread is busy so wait for a bit
AssertFatal((ret=pthread_mutex_unlock( &L1_proc->mutex))==0,"muex_unlock return %d\n",ret);
wait_timer += 50;
usleep(50);
}
else {
do_last_check = 0;
break;
}
}
if (do_last_check) {
AssertFatal((ret=pthread_mutex_timedlock(&L1_proc->mutex, &abstime)) == 0,"mutex_lock returns %d\n", ret);
if (L1_proc->instance_cnt == 0) { // L1_thread is busy so abort the subframe
AssertFatal((ret=pthread_mutex_unlock( &L1_proc->mutex))==0,"muex_unlock return %d\n",ret);
LOG_W(PHY,"L1_thread isn't ready in %d.%d, aborting RX processing\n",ru_proc->frame_rx,ru_proc->tti_rx);
return (-1);
}
}
++L1_proc->instance_cnt;
......@@ -793,6 +857,12 @@ void init_gNB_proc(int inst) {
pthread_mutex_init(&sync_phy_proc.mutex_phy_proc_tx, NULL);
pthread_cond_init(&sync_phy_proc.cond_phy_proc_tx, NULL);
sync_phy_proc.phy_proc_CC_id = 0;
gNB->threadPool = (tpool_t*)malloc(sizeof(tpool_t));
gNB->respDecode = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
char ul_pool[] = "-1,-1";
initTpool(ul_pool, gNB->threadPool, false);
initNotifiedFIFO(gNB->respDecode);
}
......@@ -907,7 +977,7 @@ void init_eNB_afterRU(void) {
for (i=0; i<gNB->RU_list[ru_id]->nb_rx; aa++,i++) {
LOG_I(PHY,"Attaching RU %d antenna %d to gNB antenna %d\n",gNB->RU_list[ru_id]->idx,i,aa);
gNB->prach_vars.rxsigF[aa] = gNB->RU_list[ru_id]->prach_rxsigF[i];
gNB->prach_vars.rxsigF[aa] = gNB->RU_list[ru_id]->prach_rxsigF[0][i];
gNB->common_vars.rxdataF[aa] = gNB->RU_list[ru_id]->common.rxdataF[i];
}
}
......
......@@ -1594,13 +1594,36 @@ void *ru_thread( void *param ) {
(void*)ru->common.rxdataF[aa], fp->symbols_per_slot*fp->ofdm_symbol_size*sizeof(int32_t));
// Do PRACH RU processing
int prach_id=find_nr_prach_ru(ru,proc->frame_rx,proc->tti_rx,SEARCH_EXIST);
uint8_t prachStartSymbol,N_dur;
if (prach_id>=0) {
rx_nr_prach_ru(ru,
ru->prach_list[prach_id].fmt,
ru->prach_list[prach_id].numRA,
ru->prach_list[prach_id].prachStartSymbol,
proc->frame_rx,proc->tti_rx);
N_dur = get_nr_prach_duration(ru->prach_list[prach_id].fmt);
/*
get_nr_prach_info_from_index(ru->config.prach_config.prach_ConfigurationIndex.value,
proc->frame_rx,proc->tti_rx,
ru->config.carrier_config.dl_frequency.value,
fp->numerology_index,
fp->frame_type,
&format,
&start_symbol,
&N_t_slot,
&N_dur,
&RA_sfn_index,
&N_RA_slot,
&config_period);
*/
for (int prach_oc = 0; prach_oc<ru->prach_list[prach_id].num_prach_ocas; prach_oc++) {
prachStartSymbol = ru->prach_list[prach_id].prachStartSymbol+prach_oc*N_dur;
//comment FK: the standard 38.211 section 5.3.2 has one extra term +14*N_RA_slot. This is because there prachStartSymbol is given wrt to start of the 15kHz slot or 60kHz slot. Here we work slot based, so this function is anyway only called in slots where there is PRACH. Its up to the MAC to schedule another PRACH PDU in the case there are there N_RA_slot \in {0,1}.
rx_nr_prach_ru(ru,
ru->prach_list[prach_id].fmt, //could also use format
ru->prach_list[prach_id].numRA,
prachStartSymbol,
prach_oc,
proc->frame_rx,proc->tti_rx);
}
free_nr_ru_prach_entry(ru,prach_id);
}
}
......
......@@ -420,7 +420,7 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
uint64_t a=rdtsc();
phy_procedures_nrUE_RX( UE, proc, 0, 1, UE->mode);
phy_procedures_nrUE_RX( UE, proc, 0, UE->mode);
LOG_D(PHY,"phy_procedures_nrUE_RX: slot:%d, time %lu\n", proc->nr_tti_rx, (rdtsc()-a)/3500);
//printf(">>> nr_ue_pdcch_procedures ended\n");
#endif
......@@ -839,6 +839,23 @@ void init_NR_UE(int nb_inst, char* rrc_config_path) {
AssertFatal((rrc_inst = nr_l3_init_ue(rrc_config_path)) != NULL, "can not initialize RRC module\n");
AssertFatal((mac_inst = nr_l2_init_ue(rrc_inst)) != NULL, "can not initialize L2 module\n");
AssertFatal((mac_inst->if_module = nr_ue_if_module_init(inst)) != NULL, "can not initialize IF module\n");
NR_PUSCH_TimeDomainResourceAllocationList_t *pusch_TimeDomainAllocationList = NULL;
if (mac_inst->ULbwp[0]->bwp_Dedicated->pusch_Config->choice.setup->pusch_TimeDomainAllocationList) {
pusch_TimeDomainAllocationList = mac_inst->ULbwp[0]->bwp_Dedicated->pusch_Config->choice.setup->pusch_TimeDomainAllocationList->choice.setup;
}
else if (mac_inst->ULbwp[0]->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList) {
pusch_TimeDomainAllocationList = mac_inst->ULbwp[0]->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList;
}
if (pusch_TimeDomainAllocationList) {
for(int i = 0; i < pusch_TimeDomainAllocationList->list.count; i++) {
AssertFatal(*pusch_TimeDomainAllocationList->list.array[i]->k2 >= DURATION_RX_TO_TX,
"Slot offset K2 (%ld) cannot be less than DURATION_RX_TO_TX (%d)\n",
*pusch_TimeDomainAllocationList->list.array[i]->k2,
DURATION_RX_TO_TX);
}
}
}
}
......
......@@ -348,7 +348,15 @@ int wake_eNB_rxtx(PHY_VARS_eNB *eNB, uint16_t sfn, uint16_t sf) {
old_sf = sf;
old_sfn = sfn;
if (old_sf == 0 && old_sfn % 100==0) LOG_W( PHY,"[eNB] sfn/sf:%d%d old_sfn/sf:%d%d proc[rx:%d%d]\n", sfn, sf, old_sfn, old_sf, proc->frame_rx, proc->subframe_rx);
if (old_sf == 0 && old_sfn % 100==0)
LOG_D(PHY,
"[eNB] sfn/sf:%d%d old_sfn/sf:%d%d proc[rx:%d%d]\n",
sfn,
sf,
old_sfn,
old_sf,
proc->frame_rx,
proc->subframe_rx);
}
++L1_proc->instance_cnt;
......@@ -435,6 +443,7 @@ int phy_rach_indication(struct nfapi_vnf_p7_config *config, nfapi_rach_indicatio
}
if(index == -1){
LOG_E(MAC,"phy_rach_indication : num of rach reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.rach_ind[index] = *ind;
......@@ -499,6 +508,7 @@ int phy_harq_indication(struct nfapi_vnf_p7_config *config, nfapi_harq_indicatio
}
if(index == -1){
LOG_E(MAC,"phy_harq_indication : num of harq reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.harq_ind[index] = *ind;
......@@ -538,6 +548,7 @@ int phy_crc_indication(struct nfapi_vnf_p7_config *config, nfapi_crc_indication_
}
if(index == -1){
LOG_E(MAC,"phy_crc_indication : num of crc reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.crc_ind[index] = *ind;
......@@ -603,6 +614,7 @@ int phy_rx_indication(struct nfapi_vnf_p7_config *config, nfapi_rx_indication_t
}
if(index == -1){
LOG_E(MAC,"phy_rx_indication : num of rx reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.rx_ind[index] = *ind;
......@@ -686,6 +698,7 @@ int phy_sr_indication(struct nfapi_vnf_p7_config *config, nfapi_sr_indication_t
}
if(index == -1){
LOG_E(MAC,"phy_sr_indication : num of sr reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.sr_ind[index] = *ind;
......@@ -737,6 +750,7 @@ int phy_cqi_indication(struct nfapi_vnf_p7_config *config, nfapi_cqi_indication_
}
if(index == -1){
LOG_E(MAC,"phy_cqi_indication : num of cqi reach max \n");
pthread_mutex_unlock(&eNB->UL_INFO_mutex);
return 0;
}
UL_RCC_INFO.cqi_ind[index] = *ind;
......
......@@ -418,8 +418,14 @@ typedef struct {
uint8_t number_of_candidates;
uint16_t CCE[64];
uint8_t L[64];
uint8_t dci_length;
uint8_t dci_format;
// 3GPP TS 38.212 Sec. 7.3.1.0, 3GPP TS 138.131 sec. 6.3.2 (SearchSpace)
// The maximum number of DCI lengths allowed by the spec are 4, with max 3 for C-RNTI.
// But a given search space may only support a maximum of 2 DCI formats at a time
// depending on its search space type configured by RRC. Hence for blind decoding, UE
// needs to monitor only upto 2 DCI lengths for a given search space.
uint8_t num_dci_options; // Num DCIs the UE actually needs to decode (1 or 2)
uint8_t dci_length_options[2];
uint8_t dci_format_options[2];
} fapi_nr_dl_config_dci_dl_pdu_rel15_t;
typedef struct {
......
......@@ -321,6 +321,7 @@ typedef enum {
#define NFAPI_NR_CONFIG_PRACH_SUB_C_SPACING_TAG 0x1012
#define NFAPI_NR_CONFIG_RESTRICTED_SET_CONFIG_TAG 0x1013
#define NFAPI_NR_CONFIG_NUM_PRACH_FD_OCCASIONS_TAG 0x1014
#define NFAPI_NR_CONFIG_PRACH_CONFIG_INDEX_TAG 0x1029
#define NFAPI_NR_CONFIG_PRACH_ROOT_SEQUENCE_INDEX_TAG 0x1015
#define NFAPI_NR_CONFIG_NUM_ROOT_SEQUENCES_TAG 0x1016
#define NFAPI_NR_CONFIG_K1_TAG 0x1017
......@@ -385,7 +386,6 @@ typedef struct
typedef struct
{
uint8_t num_prach_fd_occasions;
nfapi_uint16_tlv_t prach_root_sequence_index;//Starting logical root sequence index, 𝑖, equivalent to higher layer parameter prach-RootSequenceIndex [38.211, sec 6.3.3.1] Value: 0 -> 837
nfapi_uint8_tlv_t num_root_sequences;//Number of root sequences for a particular FD occasion that are required to generate the necessary number of preambles
nfapi_uint16_tlv_t k1;//Frequency offset (from UL bandwidth part) for each FD. [38.211, sec 6.3.3.2] Value: from 0 to 272
......@@ -401,7 +401,9 @@ typedef struct
nfapi_uint8_tlv_t prach_sub_c_spacing;//Subcarrier spacing of PRACH. [38.211 sec 4.2] Value:0->4
nfapi_uint8_tlv_t restricted_set_config;//PRACH restricted set config Value: 0: unrestricted 1: restricted set type A 2: restricted set type B
nfapi_uint8_tlv_t num_prach_fd_occasions;//Corresponds to the parameter 𝑀 in [38.211, sec 6.3.3.2] which equals the higher layer parameter msg1FDM Value: 1,2,4,8
nfapi_uint8_tlv_t prach_ConfigurationIndex;//PRACH configuration index. Value:0->255
nfapi_nr_num_prach_fd_occasions_t* num_prach_fd_occasions_list;
nfapi_uint8_tlv_t ssb_per_rach;//SSB-per-RACH-occasion Value: 0: 1/8 1:1/4, 2:1/2 3:1 4:2 5:4, 6:8 7:16
nfapi_uint8_tlv_t prach_multiple_carriers_in_a_band;//0 = disabled 1 = enabled
......
......@@ -955,7 +955,7 @@ void vnf_handle_ul_node_sync(void *pRecvMsg, int recvMsgLen, vnf_p7_t* vnf_p7)
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
NFAPI_TRACE(NFAPI_TRACE_NOTE, "(%4d/%1d) %d.%d PNF to VNF phy_id:%2d (t1/2/3/4:%8u, %8u, %8u, %8u) txrx:%4u procT:%3u latency(us):%4d(avg:%4d) offset(us):%8d filtered(us):%8d wrap[t1:%u t2:%u]\n",
NFAPI_TRACE(NFAPI_TRACE_INFO, "(%4d/%1d) %d.%d PNF to VNF phy_id:%2d (t1/2/3/4:%8u, %8u, %8u, %8u) txrx:%4u procT:%3u latency(us):%4d(avg:%4d) offset(us):%8d filtered(us):%8d wrap[t1:%u t2:%u]\n",
NFAPI_SFNSF2SFN(phy->sfn_sf), NFAPI_SFNSF2SF(phy->sfn_sf), ts.tv_sec, ts.tv_nsec, ind.header.phy_id,
ind.t1, ind.t2, ind.t3, t4,
tx_2_rx, pnf_proc_time, latency, phy->average_latency, phy->sf_offset, phy->sf_offset_filtered,
......@@ -1016,7 +1016,7 @@ void vnf_handle_ul_node_sync(void *pRecvMsg, int recvMsgLen, vnf_p7_t* vnf_p7)
{
phy->adjustment = NFAPI_SFNSF2DEC(new_sfn_sf) - NFAPI_SFNSF2DEC(curr_sfn_sf);
NFAPI_TRACE(NFAPI_TRACE_NOTE, "PNF to VNF phy_id:%d adjustment%d phy->previous_sf_offset_filtered:%d phy->previous_sf_offset_filtered:%d phy->sf_offset_trend:%d\n", ind.header.phy_id, phy->adjustment, phy->previous_sf_offset_filtered, phy->previous_sf_offset_filtered, phy->sf_offset_trend);
NFAPI_TRACE(NFAPI_TRACE_INFO, "PNF to VNF phy_id:%d adjustment%d phy->previous_sf_offset_filtered:%d phy->previous_sf_offset_filtered:%d phy->sf_offset_trend:%d\n", ind.header.phy_id, phy->adjustment, phy->previous_sf_offset_filtered, phy->previous_sf_offset_filtered, phy->sf_offset_trend);
phy->previous_t1 = 0;
phy->previous_t2 = 0;
......
......@@ -469,6 +469,9 @@ int32_t nr_segmentation(unsigned char *input_buffer,
unsigned int *F,
uint8_t BG);
/*!\fn uint32_t nr_compute_tbs
\brief This function returns the TBS in bits as per 6.1.4.2 of TS 38.214
*/
uint32_t nr_compute_tbs(uint16_t Qm,
uint16_t R,
uint16_t nb_rb,
......@@ -480,8 +483,7 @@ uint32_t nr_compute_tbs(uint16_t Qm,
uint32_t nr_compute_tbslbrm(uint16_t table,
uint16_t nb_rb,
uint8_t Nl,
uint8_t C);
uint8_t Nl);
void nr_interleaving_ldpc(uint32_t E, uint8_t Qm, uint8_t *e,uint8_t *f);
......
......@@ -425,7 +425,7 @@ int nr_rate_matching_ldpc(uint8_t Ilbrm,
}
}
else {
if (E + F <= Ncb-ind) { //E+F doesn't contain all coded bits
if (E <= Ncb-ind) { //E+F doesn't contain all coded bits
memcpy((void*)(e),(void*)(w+ind),E);
k=E;
}
......
......@@ -121,13 +121,13 @@ int phy_init_RU(RU_t *ru) {
/* number of elements of an array X is computed as sizeof(X) / sizeof(X[0]) */
//AssertFatal(ru->nb_rx <= sizeof(ru->prach_rxsigF) / sizeof(ru->prach_rxsigF[0]),
//"nb_antennas_rx too large");
ru->prach_rxsigF = (int16_t **)malloc(ru->nb_rx * sizeof(int16_t *));
ru->prach_rxsigF[0] = (int16_t **)malloc(ru->nb_rx * sizeof(int16_t *));
for (j=0; j<4; j++) ru->prach_rxsigF_br[j] = (int16_t **)malloc(ru->nb_rx * sizeof(int16_t *));
for (i=0; i<ru->nb_rx; i++) {
ru->prach_rxsigF[i] = (int16_t *)malloc16_clear( fp->ofdm_symbol_size*12*2*sizeof(int16_t) );
LOG_D(PHY,"[INIT] prach_vars->rxsigF[%d] = %p\n",i,ru->prach_rxsigF[i]);
ru->prach_rxsigF[0][i] = (int16_t *)malloc16_clear( fp->ofdm_symbol_size*12*2*sizeof(int16_t) );
LOG_D(PHY,"[INIT] prach_vars->rxsigF[%d] = %p\n",i,ru->prach_rxsigF[0][i]);
for (j=0; j<4; j++) {
ru->prach_rxsigF_br[j][i] = (int16_t *)malloc16_clear( fp->ofdm_symbol_size*12*2*sizeof(int16_t) );
......@@ -230,14 +230,14 @@ void phy_free_RU(RU_t *ru) {
}
for (i = 0; i < ru->nb_rx; i++) {
free_and_zero(ru->prach_rxsigF[i]);
free_and_zero(ru->prach_rxsigF[0][i]);
for (j = 0; j < 4; j++) free_and_zero(ru->prach_rxsigF_br[j][i]);
}
for (j = 0; j < 4; j++) free_and_zero(ru->prach_rxsigF_br[j]);
free_and_zero(ru->prach_rxsigF);
free_and_zero(ru->prach_rxsigF[0]);
/* ru->prach_rxsigF_br is not allocated -> don't free */
for (i = 0; i < RC.nb_L1_inst; i++) {
......
......@@ -264,11 +264,11 @@ int phy_init_nr_gNB(PHY_VARS_gNB *gNB,
for (i=0; i<Prx; i++) {
pusch_vars[ULSCH_id]->rxdataF_ext[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->rxdataF_ext2[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_estimates[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_estimates[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*fp->ofdm_symbol_size*2*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_estimates_ext[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_estimates_time[i] = (int32_t *)malloc16_clear( 2*sizeof(int32_t)*fp->ofdm_symbol_size );
pusch_vars[ULSCH_id]->ul_ch_ptrs_estimates[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*fp->ofdm_symbol_size*2*fp->symbols_per_slot ); // max intensity in freq is 1 sc every 2 RBs
pusch_vars[ULSCH_id]->ul_ch_ptrs_estimates_ext[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*fp->ofdm_symbol_size*2*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_ptrs_estimates_ext[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ptrs_phase_per_slot[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*fp->symbols_per_slot); // symbols per slot
pusch_vars[ULSCH_id]->rxdataF_comp[i] = (int32_t *)malloc16_clear( sizeof(int32_t)*N_RB_UL*12*fp->symbols_per_slot );
pusch_vars[ULSCH_id]->ul_ch_mag0[i] = (int32_t *)malloc16_clear( fp->symbols_per_slot*sizeof(int32_t)*N_RB_UL*12 );
......@@ -497,11 +497,12 @@ void nr_phy_config_request(NR_PHY_Config_t *phy_config) {
fd_occasion = 0;
nfapi_nr_prach_config_t *prach_config = &gNB_config->prach_config;
short_sequence = prach_config->prach_sequence_length.value;
// for(fd_occasion = 0; fd_occasion <= prach_config->num_prach_fd_occasions.value ; fd_occasion) { // TODO Need to handle for msg1-fdm > 1
num_sequences = prach_config->num_prach_fd_occasions_list[fd_occasion].num_root_sequences.value;
rootSequenceIndex = prach_config->num_prach_fd_occasions_list[fd_occasion].prach_root_sequence_index.value;
compute_nr_prach_seq(short_sequence, num_sequences, rootSequenceIndex, RC.gNB[Mod_id]->X_u);
// }
RC.gNB[Mod_id]->configured = 1;
init_symbol_rotation(fp,fp->dl_CarrierFreq);
......
......@@ -107,12 +107,14 @@ int nr_phy_init_RU(RU_t *ru) {
/* number of elements of an array X is computed as sizeof(X) / sizeof(X[0]) */
// AssertFatal(ru->nb_rx <= sizeof(ru->prach_rxsigF) / sizeof(ru->prach_rxsigF[0]),
// "nb_antennas_rx too large");
ru->prach_rxsigF = (int16_t**)malloc(ru->nb_rx * sizeof(int16_t*));
for (i=0; i<ru->nb_rx; i++) {
// largest size for PRACH FFT is 4x98304 (16*24576)
ru->prach_rxsigF[i] = (int16_t*)malloc16_clear( 4*98304*2*sizeof(int16_t) );
LOG_D(PHY,"[INIT] prach_vars->rxsigF[%d] = %p\n",i,ru->prach_rxsigF[i]);
for (j=0;j<NUMBER_OF_NR_RU_PRACH_OCCASIONS_MAX;j++) {
ru->prach_rxsigF[j] = (int16_t**)malloc(ru->nb_rx * sizeof(int16_t*));
for (i=0; i<ru->nb_rx; i++) {
// largest size for PRACH FFT is 4x98304 (16*24576)
ru->prach_rxsigF[j][i] = (int16_t*)malloc16_clear( 4*98304*2*sizeof(int16_t) );
LOG_D(PHY,"[INIT] prach_vars->rxsigF[%d] = %p\n",i,ru->prach_rxsigF[j][i]);
}
}
AssertFatal(RC.nb_nr_L1_inst <= NUMBER_OF_eNB_MAX,"gNB instances %d > %d\n",
......@@ -186,10 +188,12 @@ void nr_phy_free_RU(RU_t *ru)
for (i = 0; i < ru->nb_rx; i++) free_and_zero(ru->common.rxdataF[i]);
free_and_zero(ru->common.rxdataF);
for (i = 0; i < ru->nb_rx; i++) {
free_and_zero(ru->prach_rxsigF[i]);
for (j=0;j<NUMBER_OF_NR_RU_PRACH_OCCASIONS_MAX;j++) {
for (i = 0; i < ru->nb_rx; i++) {
free_and_zero(ru->prach_rxsigF[j][i]);
}
}
for (i = 0; i < RC.nb_nr_L1_inst; i++) {
for (p = 0; p < 15; p++) {
for (j=0; j<ru->nb_tx; j++) free_and_zero(ru->beam_weights[i][p][j]);
......
......@@ -49,7 +49,7 @@ void send_IF4p5(RU_t *ru,
LTE_DL_FRAME_PARMS *fp = ru->frame_parms;
int32_t **txdataF = ru->common.txdataF_BF;
int32_t **rxdataF = ru->common.rxdataF;
int16_t **prach_rxsigF = ru->prach_rxsigF;
int16_t **prach_rxsigF = ru->prach_rxsigF[0];
int16_t ***prach_rxsigF_br = ru->prach_rxsigF_br;
void *tx_buffer = ru->ifbuffer.tx[subframe&1];
void *tx_buffer_prach = ru->ifbuffer.tx_prach;
......@@ -276,7 +276,7 @@ void recv_IF4p5(RU_t *ru,
LTE_DL_FRAME_PARMS *fp = ru->frame_parms;
int32_t **txdataF = ru->common.txdataF_BF;
int32_t **rxdataF = ru->common.rxdataF;
int16_t **prach_rxsigF = ru->prach_rxsigF;
int16_t **prach_rxsigF = ru->prach_rxsigF[0];
int16_t ***prach_rxsigF_br = ru->prach_rxsigF_br;
void *rx_buffer = ru->ifbuffer.rx;
uint16_t element_id;
......
......@@ -167,7 +167,7 @@ void rx_prach0(PHY_VARS_eNB *eNB,
br_flag,ce_level,frame_prach,subframe,fp->prach_emtc_config_common.prach_ConfigInfo.prach_FreqOffset[ce_level],prach_ConfigIndex);
}
} else {
rxsigF = ru->prach_rxsigF;
rxsigF = ru->prach_rxsigF[0];
if (LOG_DEBUGFLAG(PRACH)) {
if (((frame_prach)&1023) < 20) LOG_I(PHY,"PRACH (RU) : running rx_prach for subframe %d, prach_FreqOffset %d, prach_ConfigIndex %d\n",
......
......@@ -39,95 +39,6 @@
//#define DEBUG_DCI
//#define DEBUG_CHANNEL_CODING
uint16_t nr_get_dci_size(nfapi_nr_dci_format_e format,
nfapi_nr_rnti_type_e rnti_type,
uint16_t N_RB) {
uint16_t size = 0;
switch(format) {
/*Only sizes for 0_0 and 1_0 are correct at the moment*/
case NFAPI_NR_UL_DCI_FORMAT_0_0:
/// fixed: Format identifier 1, Hop flag 1, MCS 5, NDI 1, RV 2, HARQ PID 4, PUSCH TPC 2 Time Domain assgnmt 4 --20
size += 20;
size += (uint8_t)ceil( log2( (N_RB*(N_RB+1))>>1 ) ); // Freq domain assignment -- hopping scenario to be updated
size += nr_get_dci_size(NFAPI_NR_DL_DCI_FORMAT_1_0, rnti_type, N_RB) - size; // Padding to match 1_0 size
// UL/SUL indicator assumed to be 0
break;
case NFAPI_NR_UL_DCI_FORMAT_0_1:
/// fixed: Format identifier 1, MCS 5, NDI 1, RV 2, HARQ PID 4, PUSCH TPC 2, SRS request 2 --17
size += 17;
// Carrier indicator
// UL/SUL indicator
// BWP Indicator
// Freq domain assignment
// Time domain assignment
// VRB to PRB mapping
// Frequency Hopping flag
// 1st DAI
// 2nd DAI
// SRS resource indicator
// Precoding info and number of layers
// Antenna ports
// CSI request
// CBGTI
// PTRS - DMRS association
// beta offset indicator
// DMRS sequence init
break;
case NFAPI_NR_DL_DCI_FORMAT_1_0:
/// fixed: Format identifier 1, VRB2PRB 1, MCS 5, NDI 1, RV 2, HARQ PID 4, DAI 2, PUCCH TPC 2, PUCCH RInd 3, PDSCH to HARQ TInd 3 Time Domain assgnmt 4 -- 28
size += 28;
size += (uint8_t)ceil( log2( (N_RB*(N_RB+1))>>1 ) ); // Freq domain assignment
break;
case NFAPI_NR_DL_DCI_FORMAT_1_1:
// Carrier indicator
size += 1; // Format identifier
// BWP Indicator
// Freq domain assignment
// Time domain assignment
// VRB to PRB mapping
// PRB bundling size indicator
// Rate matching indicator
// ZP CSI-RS trigger
/// TB1- MCS 5, NDI 1, RV 2
size += 8;
// TB2
size += 4 ; // HARQ PID
// DAI
size += 2; // TPC PUCCH
size += 3; // PUCCH resource indicator
size += 3; // PDSCH to HARQ timing indicator
// Antenna ports
// Tx Config Indication
size += 2; // SRS request
// CBGTI
// CBGFI
size += 1; // DMRS sequence init
break;
case NFAPI_NR_DL_DCI_FORMAT_2_0:
break;
case NFAPI_NR_DL_DCI_FORMAT_2_1:
break;
case NFAPI_NR_DL_DCI_FORMAT_2_2:
break;
case NFAPI_NR_DL_DCI_FORMAT_2_3:
break;
default:
AssertFatal(1==0, "Invalid NR DCI format %d\n", format);
}
return size;
}
void nr_pdcch_scrambling(uint32_t *in,
uint32_t size,
uint32_t Nid,
......@@ -153,37 +64,23 @@ void nr_pdcch_scrambling(uint32_t *in,
}
}
uint8_t nr_generate_dci_top(PHY_VARS_gNB *gNB,
nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu,
nfapi_nr_dl_tti_pdcch_pdu *ul_dci_pdu,
uint32_t **gold_pdcch_dmrs,
int32_t *txdataF,
int16_t amp,
NR_DL_FRAME_PARMS frame_parms) {
void nr_generate_dci(PHY_VARS_gNB *gNB,
nfapi_nr_dl_tti_pdcch_pdu_rel15_t *pdcch_pdu_rel15,
uint32_t **gold_pdcch_dmrs,
int32_t *txdataF,
int16_t amp,
NR_DL_FRAME_PARMS frame_parms) {
int16_t mod_dmrs[NR_MAX_CSET_DURATION][NR_MAX_PDCCH_DMRS_LENGTH>>1] __attribute__((aligned(16))); // 3 for the max coreset duration
uint16_t cset_start_sc;
uint8_t cset_start_symb, cset_nsymb;
int k,l,k_prime,dci_idx, dmrs_idx;
/*First iteration: single DCI*/
nfapi_nr_dl_tti_pdcch_pdu_rel15_t *pdcch_pdu_rel15=NULL;
// find coreset descriptor
int rb_offset;
int n_rb;
AssertFatal(pdcch_pdu!=NULL || ul_dci_pdu!=NULL,"At least one pointer has to be !NULL\n");
AssertFatal(pdcch_pdu==NULL || ul_dci_pdu==NULL,"Can't handle both DL and UL DCI in same slot\n");
if (pdcch_pdu) pdcch_pdu_rel15 = &pdcch_pdu->pdcch_pdu_rel15;
else if (ul_dci_pdu) pdcch_pdu_rel15 = &ul_dci_pdu->pdcch_pdu_rel15;
nr_fill_cce_list(gNB,0,pdcch_pdu_rel15);
get_coreset_rballoc(pdcch_pdu_rel15->FreqDomainResource,&n_rb,&rb_offset);
......@@ -330,6 +227,25 @@ uint8_t nr_generate_dci_top(PHY_VARS_gNB *gNB,
} // reg_idx
} // for (int d=0;d<pdcch_pdu_rel15->numDlDci;d++)
return 0;
}
void nr_generate_dci_top(PHY_VARS_gNB *gNB,
nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu,
nfapi_nr_dl_tti_pdcch_pdu *ul_dci_pdu,
uint32_t **gold_pdcch_dmrs,
int32_t *txdataF,
int16_t amp,
NR_DL_FRAME_PARMS frame_parms) {
AssertFatal(pdcch_pdu!=NULL || ul_dci_pdu!=NULL,"At least one pointer has to be !NULL\n");
if (pdcch_pdu && ul_dci_pdu) {
nr_generate_dci(gNB,&pdcch_pdu->pdcch_pdu_rel15,gold_pdcch_dmrs,txdataF,amp,frame_parms);
nr_generate_dci(gNB,&ul_dci_pdu->pdcch_pdu_rel15,gold_pdcch_dmrs,txdataF,amp,frame_parms);
}
else if (pdcch_pdu)
nr_generate_dci(gNB,&pdcch_pdu->pdcch_pdu_rel15,gold_pdcch_dmrs,txdataF,amp,frame_parms);
else
nr_generate_dci(gNB,&ul_dci_pdu->pdcch_pdu_rel15,gold_pdcch_dmrs,txdataF,amp,frame_parms);
}
......@@ -29,7 +29,7 @@ uint16_t nr_get_dci_size(nfapi_nr_dci_format_e format,
nfapi_nr_rnti_type_e rnti_type,
uint16_t N_RB);
uint8_t nr_generate_dci_top(PHY_VARS_gNB *gNB,
void nr_generate_dci_top(PHY_VARS_gNB *gNB,
nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu,
nfapi_nr_dl_tti_pdcch_pdu *ul_pdcch_pdu,
uint32_t **gold_pdcch_dmrs,
......
......@@ -527,7 +527,7 @@ int nr_dlsch_encoding(PHY_VARS_gNB *gNB,
if (rel15->nrOfLayers < Nl)
Nl = rel15->nrOfLayers;
Tbslbrm = nr_compute_tbslbrm(rel15->mcsTable[0],nb_rb,Nl,dlsch->harq_processes[harq_pid]->C);
Tbslbrm = nr_compute_tbslbrm(rel15->mcsTable[0],nb_rb,Nl);
start_meas(dlsch_rate_matching_stats);
nr_rate_matching_ldpc(Ilbrm,
......
This diff is collapsed.
......@@ -288,6 +288,7 @@ void nr_fill_prach(PHY_VARS_gNB *gNB,
void rx_nr_prach(PHY_VARS_gNB *gNB,
nfapi_nr_prach_pdu_t *prach_pdu,
int prachOccasion,
int frame,
int subframe,
uint16_t *max_preamble,
......@@ -298,6 +299,7 @@ void rx_nr_prach_ru(RU_t *ru,
int prach_fmt,
int numRA,
int prachStartSymbol,
int prachOccasion,
int frame,
int subframe);
......@@ -306,7 +308,7 @@ void nr_fill_prach_ru(RU_t *ru,
int Slot,
nfapi_nr_prach_pdu_t *prach_pdu);
int16_t find_nr_prach(PHY_VARS_gNB *gNB,int frame,int slot, int numRA, find_type_t type);
int16_t find_nr_prach(PHY_VARS_gNB *gNB,int frame,int slot, find_type_t type);
int16_t find_nr_prach_ru(RU_t *ru,int frame,int slot, find_type_t type);
NR_gNB_PUCCH_t *new_gNB_pucch(void);
......@@ -325,7 +327,7 @@ int nr_find_pucch(uint16_t rnti,
void init_prach_list(PHY_VARS_gNB *gNB);
void init_prach_ru_list(RU_t *ru);
void free_nr_ru_prach_entry(RU_t *ru, int prach_id);
void free_nr_prach_entry(PHY_VARS_gNB *gNB, int prach_id);
void nr_decode_pucch1(int32_t **rxdataF,
pucch_GroupHopping_t pucch_GroupHopping,
......
......@@ -31,6 +31,7 @@
*/
#include "PHY/defs_gNB.h"
#include "common/utils/threadPool/thread-pool.h"
void free_gNB_ulsch(NR_gNB_ULSCH_t **ulsch,uint8_t N_RB_UL);
......
......@@ -1147,9 +1147,9 @@ int nr_rx_pusch(PHY_VARS_gNB *gNB,
//--------------------- RBs extraction ---------------------
//----------------------------------------------------------
if (nb_re_pusch > 0) {
gNB->pusch_vars[ulsch_id]->ul_valid_re_per_slot[symbol] = nb_re_pusch;
gNB->pusch_vars[ulsch_id]->ul_valid_re_per_slot[symbol] = nb_re_pusch;
if (nb_re_pusch > 0) {
start_meas(&gNB->ulsch_rbs_extraction_stats);
nr_ulsch_extract_rbs_single(gNB->common_vars.rxdataF,
......
......@@ -414,7 +414,7 @@ void nr_decode_pucch0(PHY_VARS_gNB *gNB,
uci_pdu->harq->harq_confidence_level = (no_conf) ? 1 : 0;
uci_pdu->harq->harq_list = (nfapi_nr_harq_t*)malloc(1);
uci_pdu->harq->harq_list[0].harq_value = index&0x01;
LOG_I(PHY, "HARQ value %d with confidence level (0 is good, 1 is bad) %d\n",
LOG_D(PHY, "HARQ value %d with confidence level (0 is good, 1 is bad) %d\n",
uci_pdu->harq->harq_list[0].harq_value,uci_pdu->harq->harq_confidence_level);
if (pucch_pdu->sr_flag == 1) {
uci_pdu->sr = calloc(1,sizeof(*uci_pdu->sr));
......@@ -429,7 +429,7 @@ void nr_decode_pucch0(PHY_VARS_gNB *gNB,
uci_pdu->harq->harq_list = (nfapi_nr_harq_t*)malloc(2);
uci_pdu->harq->harq_list[1].harq_value = index&0x01;
uci_pdu->harq->harq_list[0].harq_value = (index>>1)&0x01;
LOG_I(PHY, "HARQ values %d and %d with confidence level (0 is good, 1 is bad) %d\n",
LOG_D(PHY, "HARQ values %d and %d with confidence level (0 is good, 1 is bad) %d\n",
uci_pdu->harq->harq_list[1].harq_value,uci_pdu->harq->harq_list[0].harq_value,uci_pdu->harq->harq_confidence_level);
if (pucch_pdu->sr_flag == 1) {
uci_pdu->sr = calloc(1,sizeof(*uci_pdu->sr));
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment