build_helper 22.7 KB
Newer Older
1 2 3 4 5
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
6
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

22
# file build_helper
thomasl's avatar
thomasl committed
23
# brief
24
# authors Laurent Thomas, Lionel GAUTHIER
thomasl's avatar
thomasl committed
25 26
#
#######################################
27 28 29 30 31 32 33
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
34 35 36 37 38
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
39 40 41 42
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

43
SUDO='sudo -E'
thomasl's avatar
thomasl committed
44

45 46 47 48 49 50 51
###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
52
blue='\E[1;34m'
53 54 55 56 57 58
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

59
cecho()  {
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

77 78 79
########################
# distribution helpers #
########################
80

81 82 83 84
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
85 86
#   ubuntu16.04
#   debian8.5
87
get_distribution_release() {
88 89
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
90 91 92 93
    else
        echo Unknown
    fi
}
94

95 96 97
check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
98
        "ubuntu18.04") return 0 ;;
99 100
        "ubuntu17.10") return 0 ;;
        "ubuntu17.04") return 0 ;;
101 102 103 104 105
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
        "centos7")     return 0 ;;
106 107 108
    esac
    return 1
}
109

110 111 112 113 114 115 116 117 118 119 120
##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT
121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
148
 set_openair_env
149
 dir=$OPENAIR_DIR/cmake_targets
150
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
151 152
 rm -rf $dir/lte_build_oai $dir/lte-simulators/build
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
153
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
154 155 156 157 158 159
}

###################################
# Compilers
###################################

160 161 162 163 164 165 166 167 168 169 170 171 172 173
#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1"|wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

thomasl's avatar
thomasl committed
174
compilations() {
thomasl's avatar
thomasl committed
175
  cd $OPENAIR_DIR/cmake_targets/$1/build
176
  set +e
thomasl's avatar
thomasl committed
177 178
  {
    rm -f $3
179 180 181 182 183 184
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       make -j`nproc` $2
    fi

thomasl's avatar
thomasl committed
185
  } > $dlog/$2.$REL.txt 2>&1
186
  set -e
187
  echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
188
  if [ -s $3 ] ; then
189
     cp $3 $4
thomasl's avatar
thomasl committed
190
     echo_success "$2 compiled"
191
     check_warnings "$dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
192
  else
thomasl's avatar
thomasl committed
193
     echo_error "$2 compilation failed"
194
     exit 1
thomasl's avatar
thomasl committed
195 196 197
  fi
}

198 199 200 201
############################################
# External packages installers
############################################

202
install_protobuf_from_source(){
203 204 205
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
206 207
    cd /tmp
    echo "Downloading protobuf"
208 209 210 211 212 213
    #rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    #wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
    #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
    #cd protobuf-2.6.1/
    rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
    wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
214
    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
215
    cd protobuf-3.3.0/
216 217 218 219 220
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
221
    ) >& $protobuf_install_log
222 223 224
}

install_protobuf_c_from_source(){
225 226 227
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
228 229 230
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
        export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
    fi
231 232 233 234 235
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
236
	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
237 238 239 240 241 242
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
243
    ) >& $protobuf_c_install_log
244 245
}

246 247 248 249 250 251 252
install_usrp_uhd_driver_from_source(){
    uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
    echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
    (
    cd /tmp
    echo "Downloading UHD driver"
    rm -rf /tmp/uhd
Cedric Roux's avatar
Cedric Roux committed
253
    git clone https://github.com/EttusResearch/uhd.git
254 255 256 257 258 259
    cd uhd
    git checkout tags/release_003_010_001_001
    mkdir -p host/build
    cd host/build
    $CMAKE ../
    echo "Compiling UHD"
Cedric Roux's avatar
Cedric Roux committed
260
    make -j`nproc`
261 262 263 264 265 266
    make test
    $SUDO make install
    $SUDO ldconfig
    ) >& $uhd_install_log
}

thomasl's avatar
thomasl committed
267
check_install_usrp_uhd_driver(){
268
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
269
        #first we remove old installation
270
        $SUDO apt-get remove -y uhd || true
271
        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
thomasl's avatar
thomasl committed
272
        v=$(lsb_release -cs)
273
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
274
        # The new USRP repository
275
        # Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290
        # timeout due to proxy / network latencies in Eurecom on VM
        echo_info "\nAdding PPA repository ettusresearch/uhd\n"
        x=0
        while [ $x -le 5 ]
        do
            if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
            then
                echo_info "add-apt-repository successful\n"
                break
            else
                echo_info "add-apt-repository failed, retrying...\n"
                sleep 30
            fi
            x=$((x + 1))
        done
thomasl's avatar
thomasl committed
291
        $SUDO apt-get update
292 293
        $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
        $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
294
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
295
        $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
Cedric Roux's avatar
Cedric Roux committed
296
        $SUDO pip install requests
297 298 299
        if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
            # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
            $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
Cedric Roux's avatar
Cedric Roux committed
300
            install_usrp_uhd_driver_from_source
301 302 303
        else
            $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
        fi
304
    fi
305 306 307
}

install_usrp_uhd_driver() {
308
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
309 310 311
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
312 313 314 315 316 317
    fi
    if [ -z $1 ]; then
      $SUDO uhd_images_downloader
    else
      $SUDO uhd_images_downloader -i $1
    fi
thomasl's avatar
thomasl committed
318
}
319

320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346
install_bladerf_driver_from_source(){
    bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
    echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
    (
    cd /tmp
    echo "Downloading BladeRF driver"
    rm -rf /tmp/bladeRF
    git clone https://github.com/Nuand/bladeRF.git
    cd bladeRF
    git checkout tags/2016.06
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling BladeRF driver"
    make
    $SUDO make install
    $SUDO ldconfig
    echo "Downloading FPGA and firmware images"
    cd /tmp/bladeRF
    wget https://www.nuand.com/fx3/bladeRF_fw_latest.img
    wget https://www.nuand.com/fpga/hostedx40-latest.rbf
    sudo mkdir -p /usr/share/Nuand/bladeRF
    sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
    sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
    ) >& $bladerf_install_log
}

347
check_install_bladerf_driver(){
348 349 350 351 352 353 354
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
            $SUDO add-apt-repository -y ppa:bladerf/bladerf
            $SUDO apt-get update
        fi
        $SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
        $SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
355
        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
356 357
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        install_bladerf_driver_from_source
358 359 360
   else
        echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
   fi
361 362 363 364
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
365
}
thomasl's avatar
thomasl committed
366

367 368 369 370 371 372 373 374 375
check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
376
                echo_fatal "Cannot compile lmssdr device"
377 378 379 380 381
	fi


}

thomasl's avatar
thomasl committed
382
check_install_additional_tools (){
383 384
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
385
    PACKAGE_LIST="\
thomasl's avatar
thomasl committed
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
402
	vlan	  \
403
	ctags \
404 405
        ntpdate \
        iperf3 \
Rohit Gupta's avatar
Rohit Gupta committed
406 407 408
        android-tools-adb \
	wvdial \
        python-numpy \
409 410 411 412 413
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
414
        python-matplotlib"
415
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
416
    PACKAGE_LIST="\
417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
440 441 442
      python-netifaces \
      scipy \
      python-matplotlib"
443
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
444
    PACKAGE_LIST=" \
445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
468 469 470 471 472
      python-netifaces \
      python2-scipy \
      python2-matplotlib"
  fi
    $SUDO $INSTALLER install -y $PACKAGE_LIST
473

474
    $SUDO rm -fr /opt/ssh
475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh

  #The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    $SUDO pip install paramiko
    $SUDO pip install pyroute2 colorama
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
    ) >& $log_netiface
491
  fi
thomasl's avatar
thomasl committed
492 493 494
}

check_install_oai_software() {
495
    local specific_packages=""
496 497 498 499
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
500 501
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
502 503
    local LAPACK_LIBNAME="liblapack.so"
    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
504
    $SUDO apt install -y software-properties-common
505
    case "$(get_distribution_release)" in
506
        "ubuntu14.04")
Cedric Roux's avatar
Cedric Roux committed
507
            specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
508 509 510
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
511
            ;;
512
        "ubuntu16.04")
Cedric Roux's avatar
Cedric Roux committed
513
            specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
514 515
            ;;
        "ubuntu17.04")
Cedric Roux's avatar
Cedric Roux committed
516
            specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
517 518
            ;;
        "ubuntu17.10")
Cedric Roux's avatar
Cedric Roux committed
519
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
520 521 522 523
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
            ;;
        "ubuntu18.04")
Cedric Roux's avatar
Cedric Roux committed
524
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
525 526
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
527
            ;;
528
    esac
529
    $SUDO apt-get install -y \
530
    $specific_packages \
531
	autoconf  \
thomasl's avatar
thomasl committed
532 533 534 535 536 537
	automake  \
	bison  \
	build-essential \
	cmake \
	cmake-curses-gui  \
	doxygen \
538 539
	doxygen-gui \
	texlive-latex-base \
thomasl's avatar
thomasl committed
540 541
	ethtool \
	flex  \
542 543
	gdb  \
	git \
thomasl's avatar
thomasl committed
544 545 546 547 548 549 550 551
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libblas-dev \
552 553
  liblapack-dev\
  liblapacke-dev\
554
	libffi-dev \
thomasl's avatar
thomasl committed
555 556 557 558 559 560
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
561
	libidn11-dev \
thomasl's avatar
thomasl committed
562
	libmysqlclient-dev  \
563
	liboctave-dev \
thomasl's avatar
thomasl committed
564
	libpgm-dev \
565
	libpython2.7-dev \
thomasl's avatar
thomasl committed
566 567 568 569 570 571 572
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
573
	libxslt1-dev \
574 575 576
	mscgen  \
	octave \
	octave-signal \
thomasl's avatar
thomasl committed
577 578 579 580
	openssh-client \
	openssh-server \
	openssl \
	python  \
581
	subversion \
582 583 584
	xmlstarlet \
	python-pip \
	pydb \
585
	libyaml-dev \
586 587
	wget \
	libxpm-dev
Rohit Gupta's avatar
Rohit Gupta committed
588

589
    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
590

591
    $SUDO apt-get install -y nettle-dev nettle-bin
592 593 594 595 596 597 598 599
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
Cedric Roux's avatar
Cedric Roux committed
600
      $SUDO $INSTALLER install -y python-epdb vim-common
601 602 603
    else
      $SUDO $INSTALLER install -y mscgen pydb
    fi
604

605 606 607
    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
608
      bc \
609
      bison \
610
      $CMAKE \
611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      octave-devel \
      openpgm-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      octave \
      octave-signal \
      openssh-clients \
      openssh-server \
      openssl \
651 652
      patch \
      psmisc \
653 654 655 656 657 658
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
659
      kernel-devel \
660
      nettle-devel \
661 662 663 664 665
      gnutls-devel \
      libXpm-devel \
      lapack \
      lapack-devel \
      blas \
Cedric Roux's avatar
Cedric Roux committed
666 667
      blas-devel \
      libyaml-devel
668 669
  fi

thomasl's avatar
thomasl committed
670
    install_asn1c_from_source
671 672
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
thomasl's avatar
thomasl committed
673 674
}

thomasl's avatar
thomasl committed
675
install_asn1c_from_source(){
676 677
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
678
    (
679
    $SUDO rm -rf /tmp/asn1c
680
    # GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
Cedric Roux's avatar
Cedric Roux committed
681
    git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
682
    cd /tmp/asn1c
Cedric Roux's avatar
Cedric Roux committed
683 684 685
    # better to use a given commit than a branch in case the branch
    # is updated and requires modifications in the source of OAI
    #git checkout velichkov_s1ap_plus_option_group
686
    git checkout 73d6b23dcec9ab36605b4af884143824392134c1
687
    autoreconf -iv
thomasl's avatar
thomasl committed
688
    ./configure
689
    make -j`nproc`
690
    $SUDO make install
Rohit Gupta's avatar
Rohit Gupta committed
691
    cd -
692
    $SUDO ldconfig
693
    ) > $asn1_install_log 2>&1
thomasl's avatar
thomasl committed
694 695 696
}

#################################################
697
# 2. compile
thomasl's avatar
thomasl committed
698
################################################
thomasl's avatar
thomasl committed
699

thomasl's avatar
thomasl committed
700
install_nas_tools() {
701
  if [ ! -f .ue.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
702
    echo_success "generate .ue_emm.nvram .ue.nvram"
703
    ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
704
  else
705
    [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
706
  fi
thomasl's avatar
thomasl committed
707

708
  if [ ! -f .usim.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
709
    echo_success "generate .usim.nvram"
710
    ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
711
  else
712
    [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
713
  fi
thomasl's avatar
thomasl committed
714 715

}
716

thomasl's avatar
thomasl committed
717 718 719 720 721 722 723 724 725

################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
726
    openair_path=${openair_path%/openair[123]/*}
thomasl's avatar
thomasl committed
727 728 729 730 731 732 733
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

734 735 736 737 738 739 740 741
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
742
echo_info "** Calling sync now..."
743
sync
744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
761
           do
762 763 764 765
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
766 767 768 769 770 771 772 773 774
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
Rohit Gupta's avatar
Rohit Gupta committed
792
}