nr-ue.c 57.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.0  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

/*! \file lte-ue.c
 * \brief threads and support functions for real-time LTE UE target
 * \author R. Knopp, F. Kaltenberger, Navid Nikaein
 * \date 2015
 * \version 0.1
 * \company Eurecom
 * \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr
 * \note
 * \warning
 */
#include "nr-uesoftmodem.h"

#include "rt_wrapper.h"

36 37
#include "LAYER2/NR_MAC_UE/mac.h"
//#include "RRC/LTE/rrc_extern.h"
38 39 40 41 42
#include "PHY_INTERFACE/phy_interface_extern.h"

#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all

43
#include "fapi_nr_ue_l1.h"
44
#include "PHY/phy_extern_nr_ue.h"
Hongzhi Wang's avatar
Hongzhi Wang committed
45 46
#include "PHY/INIT/phy_init.h"
#include "PHY/MODULATION/modulation_UE.h"
47
#include "LAYER2/NR_MAC_UE/mac_proto.h"
48
#include "RRC/NR_UE/rrc_proto.h"
49 50 51 52

//#ifndef NO_RAT_NR
#include "SCHED_NR/phy_frame_config_nr.h"
//#endif
53
#include "SCHED_NR_UE/defs.h"
54

55
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
56

57 58
#include "common/utils/LOG/log.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
59 60 61

#include "T.h"

62
#ifdef XFORMS
63 64
#include "PHY/TOOLS/nr_phy_scope.h"

65 66 67 68
extern char do_forms;
#endif


69
extern double cpuf;
hongzhi wang's avatar
hongzhi wang committed
70 71
//static  nfapi_nr_config_request_t config_t;
//static  nfapi_nr_config_request_t* config =&config_t;
72

73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135
/*
 *  NR SLOT PROCESSING SEQUENCE
 *
 *  Processing occurs with following steps for connected mode:
 *
 *  - Rx samples for a slot are received,
 *  - PDCCH processing (including DCI extraction for downlink and uplink),
 *  - PDSCH processing (including transport blocks decoding),
 *  - PUCCH/PUSCH (transmission of acknowledgements, CSI, ... or data).
 *
 *  Time between reception of the slot and related transmission depends on UE processing performance.
 *  It is defined by the value NR_UE_CAPABILITY_SLOT_RX_TO_TX.
 *
 *  In NR, network gives the duration between Rx slot and Tx slot in the DCI:
 *  - for reception of a PDSCH and its associated acknowledgment slot (with a PUCCH or a PUSCH),
 *  - for reception of an uplink grant and its associated PUSCH slot.
 *
 *  So duration between reception and it associated transmission depends on its transmission slot given in the DCI.
 *  NR_UE_CAPABILITY_SLOT_RX_TO_TX means the minimum duration but higher duration can be given by the network because UE can support it.
 *
*                                                                                                    Slot k
*                                                                                  -------+------------+--------
*                Frame                                                                    | Tx samples |
*                Subframe                                                                 |   buffer   |
*                Slot n                                                            -------+------------+--------
*       ------ +------------+--------                                                     |
*              | Rx samples |                                                             |
*              |   buffer   |                                                             |
*       -------+------------+--------                                                     |
*                           |                                                             |
*                           V                                                             |
*                           +------------+                                                |
*                           |   PDCCH    |                                                |
*                           | processing |                                                |
*                           +------------+                                                |
*                           |            |                                                |
*                           |            v                                                |
*                           |            +------------+                                   |
*                           |            |   PDSCH    |                                   |
*                           |            | processing | decoding result                   |
*                           |            +------------+    -> ACK/NACK of PDSCH           |
*                           |                         |                                   |
*                           |                         v                                   |
*                           |                         +-------------+------------+        |
*                           |                         | PUCCH/PUSCH | Tx samples |        |
*                           |                         |  processing | transfer   |        |
*                           |                         +-------------+------------+        |
*                           |                                                             |
*                           |/___________________________________________________________\|
*                            \  duration between reception and associated transmission   /
*
* Remark: processing is done slot by slot, it can be distribute on different threads which are executed in parallel.
* This is an architecture optimization in order to cope with real time constraints.
* By example, for LTE, subframe processing is spread over 4 different threads.
*
 */

#ifndef NO_RAT_NR
  #define DURATION_RX_TO_TX           (NR_UE_CAPABILITY_SLOT_RX_TO_TX)  /* for NR this will certainly depends to such UE capability which is not yet defined */
#else
  #define DURATION_RX_TO_TX           (4)   /* For LTE, this duration is fixed to 4 and it is linked to LTE standard for both modes FDD/TDD */
#endif

136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208
#define FRAME_PERIOD    100000000ULL
#define DAQ_PERIOD      66667ULL
#define FIFO_PRIORITY   40

typedef enum {
    pss=0,
    pbch=1,
    si=2
} sync_mode_t;

void init_UE_threads(PHY_VARS_NR_UE *UE);
void *UE_thread(void *arg);
void init_UE(int nb_inst);

int32_t **rxdata;
int32_t **txdata;

#define KHz (1000UL)
#define MHz (1000*KHz)
#define SAIF_ENABLED

#ifdef SAIF_ENABLED
uint64_t	g_ue_rx_thread_busy	= 0;
#endif

typedef struct eutra_band_s {
    int16_t band;
    uint32_t ul_min;
    uint32_t ul_max;
    uint32_t dl_min;
    uint32_t dl_max;
    lte_frame_type_t frame_type;
} eutra_band_t;

typedef struct band_info_s {
    int nbands;
    eutra_band_t band_info[100];
} band_info_t;

band_info_t bands_to_scan;

static const eutra_band_t eutra_bands[] = {
    { 1, 1920    * MHz, 1980    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    { 2, 1850    * MHz, 1910    * MHz, 1930    * MHz, 1990    * MHz, FDD},
    { 3, 1710    * MHz, 1785    * MHz, 1805    * MHz, 1880    * MHz, FDD},
    { 4, 1710    * MHz, 1755    * MHz, 2110    * MHz, 2155    * MHz, FDD},
    { 5,  824    * MHz,  849    * MHz,  869    * MHz,  894    * MHz, FDD},
    { 6,  830    * MHz,  840    * MHz,  875    * MHz,  885    * MHz, FDD},
    { 7, 2500    * MHz, 2570    * MHz, 2620    * MHz, 2690    * MHz, FDD},
    { 8,  880    * MHz,  915    * MHz,  925    * MHz,  960    * MHz, FDD},
    { 9, 1749900 * KHz, 1784900 * KHz, 1844900 * KHz, 1879900 * KHz, FDD},
    {10, 1710    * MHz, 1770    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    {11, 1427900 * KHz, 1452900 * KHz, 1475900 * KHz, 1500900 * KHz, FDD},
    {12,  698    * MHz,  716    * MHz,  728    * MHz,  746    * MHz, FDD},
    {13,  777    * MHz,  787    * MHz,  746    * MHz,  756    * MHz, FDD},
    {14,  788    * MHz,  798    * MHz,  758    * MHz,  768    * MHz, FDD},
    {17,  704    * MHz,  716    * MHz,  734    * MHz,  746    * MHz, FDD},
    {20,  832    * MHz,  862    * MHz,  791    * MHz,  821    * MHz, FDD},
    {22, 3510    * MHz, 3590    * MHz, 3410    * MHz, 3490    * MHz, FDD},
    {33, 1900    * MHz, 1920    * MHz, 1900    * MHz, 1920    * MHz, TDD},
    {34, 2010    * MHz, 2025    * MHz, 2010    * MHz, 2025    * MHz, TDD},
    {35, 1850    * MHz, 1910    * MHz, 1850    * MHz, 1910    * MHz, TDD},
    {36, 1930    * MHz, 1990    * MHz, 1930    * MHz, 1990    * MHz, TDD},
    {37, 1910    * MHz, 1930    * MHz, 1910    * MHz, 1930    * MHz, TDD},
    {38, 2570    * MHz, 2620    * MHz, 2570    * MHz, 2630    * MHz, TDD},
    {39, 1880    * MHz, 1920    * MHz, 1880    * MHz, 1920    * MHz, TDD},
    {40, 2300    * MHz, 2400    * MHz, 2300    * MHz, 2400    * MHz, TDD},
    {41, 2496    * MHz, 2690    * MHz, 2496    * MHz, 2690    * MHz, TDD},
    {42, 3400    * MHz, 3600    * MHz, 3400    * MHz, 3600    * MHz, TDD},
    {43, 3600    * MHz, 3800    * MHz, 3600    * MHz, 3800    * MHz, TDD},
    {44, 703    * MHz, 803    * MHz, 703    * MHz, 803    * MHz, TDD},
};

Hongzhi Wang's avatar
Hongzhi Wang committed
209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228
PHY_VARS_NR_UE* init_nr_ue_vars(NR_DL_FRAME_PARMS *frame_parms,
			  uint8_t UE_id,
			  uint8_t abstraction_flag)

{

  PHY_VARS_NR_UE* ue;

  if (frame_parms!=(NR_DL_FRAME_PARMS *)NULL) { // if we want to give initial frame parms, allocate the PHY_VARS_UE structure and put them in
    ue = (PHY_VARS_NR_UE *)malloc(sizeof(PHY_VARS_NR_UE));
    memset(ue,0,sizeof(PHY_VARS_NR_UE));
    memcpy(&(ue->frame_parms), frame_parms, sizeof(NR_DL_FRAME_PARMS));
  }
  else ue = PHY_vars_UE_g[UE_id][0];

  ue->Mod_id      = UE_id;
  ue->mac_enabled = 1;
  // initialize all signal buffers
  init_nr_ue_signal(ue,1,abstraction_flag);
  // intialize transport
229
  init_nr_ue_transport(ue,abstraction_flag);
Hongzhi Wang's avatar
Hongzhi Wang committed
230 231 232 233

  return(ue);
}

234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284
void init_thread(int sched_runtime, int sched_deadline, int sched_fifo, cpu_set_t *cpuset, char * name) {

#ifdef DEADLINE_SCHEDULER
    if (sched_runtime!=0) {
        struct sched_attr attr= {0};
        attr.size = sizeof(attr);
        attr.sched_policy = SCHED_DEADLINE;
        attr.sched_runtime  = sched_runtime;
        attr.sched_deadline = sched_deadline;
        attr.sched_period   = 0;
        AssertFatal(sched_setattr(0, &attr, 0) == 0,
                    "[SCHED] %s thread: sched_setattr failed %s \n", name, strerror(errno));
        LOG_I(HW,"[SCHED][eNB] %s deadline thread %lu started on CPU %d\n",
              name, (unsigned long)gettid(), sched_getcpu());
    }

#else
    if (CPU_COUNT(cpuset) > 0)
        AssertFatal( 0 == pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), cpuset), "");
    struct sched_param sp;
    sp.sched_priority = sched_fifo;
    AssertFatal(pthread_setschedparam(pthread_self(),SCHED_FIFO,&sp)==0,
                "Can't set thread priority, Are you root?\n");
    /* Check the actual affinity mask assigned to the thread */
    cpu_set_t *cset=CPU_ALLOC(CPU_SETSIZE);
    if (0 == pthread_getaffinity_np(pthread_self(), CPU_ALLOC_SIZE(CPU_SETSIZE), cset)) {
      char txt[512]={0};
      for (int j = 0; j < CPU_SETSIZE; j++)
        if (CPU_ISSET(j, cset))
	  sprintf(txt+strlen(txt), " %d ", j);
      printf("CPU Affinity of thread %s is %s\n", name, txt);
    }
    CPU_FREE(cset);
#endif

    // Lock memory from swapping. This is a process wide call (not constraint to this thread).
    mlockall(MCL_CURRENT | MCL_FUTURE);
    pthread_setname_np( pthread_self(), name );

    // LTS: this sync stuff should be wrong
    printf("waiting for sync (%s)\n",name);
    pthread_mutex_lock(&sync_mutex);
    printf("Locked sync_mutex, waiting (%s)\n",name);
    while (sync_var<0)
        pthread_cond_wait(&sync_cond, &sync_mutex);
    pthread_mutex_unlock(&sync_mutex);
    printf("started %s as PID: %ld\n",name, gettid());
}

void init_UE(int nb_inst)
{
285 286 287 288
    int inst;
    NR_UE_MAC_INST_t *mac_inst;
    for (inst=0; inst < nb_inst; inst++) {
        //    UE->rfdevice.type      = NONE_DEV;
hongzhi wang's avatar
hongzhi wang committed
289
        //PHY_VARS_NR_UE *UE = PHY_vars_UE_g[inst][0];
290 291
        LOG_I(PHY,"Initializing memory for UE instance %d (%p)\n",inst,PHY_vars_UE_g[inst]);
            PHY_vars_UE_g[inst][0] = init_nr_ue_vars(NULL,inst,0);
hongzhi wang's avatar
hongzhi wang committed
292
        PHY_VARS_NR_UE *UE = PHY_vars_UE_g[inst][0];
293 294 295 296 297 298 299 300 301

        AssertFatal((UE->if_inst = nr_ue_if_module_init(inst)) != NULL, "can not initial IF module\n");
        nr_l3_init_ue();
        nr_l2_init_ue();
        
        mac_inst = get_mac_inst(0);
        mac_inst->if_module = UE->if_inst;
        UE->if_inst->scheduled_response = nr_ue_scheduled_response;
        UE->if_inst->phy_config_request = nr_ue_phy_config_request;
hongzhi wang's avatar
hongzhi wang committed
302 303 304 305 306
        
        LOG_I(PHY,"Intializing UE Threads for instance %d (%p,%p)...\n",inst,PHY_vars_UE_g[inst],PHY_vars_UE_g[inst][0]);
		//init_UE_threads(inst);
		//UE = PHY_vars_UE_g[inst][0];
		
307 308 309 310 311 312

        AssertFatal(0 == pthread_create(&UE->proc.pthread_ue,
                                        &UE->proc.attr_ue,
                                        UE_thread,
                                        (void*)UE), "");
    }
313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346

  printf("UE threads created by %ld\n", gettid());
#if 0
#if defined(ENABLE_USE_MME)
  extern volatile int start_UE;
  while (start_UE == 0) {
    sleep(1);
  }
#endif
#endif
}

/*!
 * \brief This is the UE synchronize thread.
 * It performs band scanning and synchonization.
 * \param arg is a pointer to a \ref PHY_VARS_NR_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */
static void *UE_thread_synch(void *arg) {
    static int __thread UE_thread_synch_retval;
    int i, hw_slot_offset;
    PHY_VARS_NR_UE *UE = (PHY_VARS_NR_UE*) arg;
    int current_band = 0;
    int current_offset = 0;
    sync_mode_t sync_mode = pbch;
    int CC_id = UE->CC_id;
    int freq_offset=0;
    char threadname[128];

    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    if ( threads.iq != -1 )
        CPU_SET(threads.iq, &cpuset);
    // this thread priority must be lower that the main acquisition thread
347
    sprintf(threadname, "sync UE %d", UE->Mod_id);
348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407
    init_thread(100000, 500000, FIFO_PRIORITY-1, &cpuset, threadname);

    UE->is_synchronized = 0;

    if (UE->UE_scan == 0) {
        int ind;
        for ( ind=0;
                ind < sizeof(eutra_bands) / sizeof(eutra_bands[0]);
                ind++) {
            current_band = eutra_bands[ind].band;
            LOG_D(PHY, "Scanning band %d, dl_min %"PRIu32", ul_min %"PRIu32"\n", current_band, eutra_bands[ind].dl_min,eutra_bands[ind].ul_min);
            if ( eutra_bands[ind].dl_min <= downlink_frequency[0][0] && eutra_bands[ind].dl_max >= downlink_frequency[0][0] ) {
                for (i=0; i<4; i++)
                    uplink_frequency_offset[CC_id][i] = eutra_bands[ind].ul_min - eutra_bands[ind].dl_min;
                break;
            }
        }
        AssertFatal( ind < sizeof(eutra_bands) / sizeof(eutra_bands[0]), "Can't find EUTRA band for frequency");

        LOG_I( PHY, "[SCHED][UE] Check absolute frequency DL %"PRIu32", UL %"PRIu32" (oai_exit %d, rx_num_channels %d)\n",
               downlink_frequency[0][0], downlink_frequency[0][0]+uplink_frequency_offset[0][0],
               oai_exit, openair0_cfg[0].rx_num_channels);

        for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
            openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
            openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
            if (uplink_frequency_offset[CC_id][i] != 0) //
                openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_FDD;
            else //FDD
                openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_TDD;
        }
        sync_mode = pbch;

    } else {
        current_band=0;
        for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
            downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[CC_id].dl_min;
            uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] =
                bands_to_scan.band_info[CC_id].ul_min-bands_to_scan.band_info[CC_id].dl_min;
            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
            openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
            openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
        }
    }

    //    AssertFatal(UE->rfdevice.trx_start_func(&UE->rfdevice) == 0, "Could not start the device\n");

    while (oai_exit==0) {
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        while (UE->proc.instance_cnt_synch < 0)
            // the thread waits here most of the time
            pthread_cond_wait( &UE->proc.cond_synch, &UE->proc.mutex_synch );
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        switch (sync_mode) {
        case pss:
            LOG_I(PHY,"[SCHED][UE] Scanning band %d (%d), freq %u\n",bands_to_scan.band_info[current_band].band, current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
Hongzhi Wang's avatar
Hongzhi Wang committed
408
            //lte_sync_timefreq(UE,current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442
            current_offset += 20000000; // increase by 20 MHz

            if (current_offset > bands_to_scan.band_info[current_band].dl_max-bands_to_scan.band_info[current_band].dl_min) {
                current_band++;
                current_offset=0;
            }

            if (current_band==bands_to_scan.nbands) {
                current_band=0;
                oai_exit=1;
            }

            for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].dl_min+current_offset;
                uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].ul_min-bands_to_scan.band_info[0].dl_min + current_offset;

                openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
                openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
                openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
                if (UE->UE_scan_carrier) {
                    openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }

            }

            break;

        case pbch:

#if DISABLE_LOG_X
            printf("[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#else
            LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#endif
Hongzhi Wang's avatar
Hongzhi Wang committed
443
            if (nr_initial_sync( UE, UE->mode ) == 0) {
444

445 446
	      //write_output("txdata_sym.m", "txdata_sym", UE->common_vars.rxdata[0], (10*UE->frame_parms.samples_per_subframe), 1, 1);

447
                hw_slot_offset = (UE->rx_offset<<1) / UE->frame_parms.samples_per_subframe;
448 449 450 451 452 453 454 455 456 457 458 459 460
                printf("Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %d (DL %u, UL %u), UE_scan_carrier %d\n",
                       hw_slot_offset,
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset,
                       UE->UE_scan_carrier );


                    // rerun with new cell parameters and frequency-offset
                    for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                        openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
			if (UE->UE_scan_carrier == 1) {
461
			  if (freq_offset >= 0)
462
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] += abs(UE->common_vars.freq_offset);
463
			  else
464
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] -= abs(UE->common_vars.freq_offset);
465
			  openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
466
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i]+uplink_frequency_offset[CC_id][i];
467 468 469 470
			  downlink_frequency[CC_id][i] = openair0_cfg[CC_id].rx_freq[i];
			  freq_offset=0;
			}
		    }
471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499

                    // reconfigure for potentially different bandwidth
                    switch(UE->frame_parms.N_RB_DL) {
                    case 6:
                        openair0_cfg[UE->rf_map.card].sample_rate =1.92e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =.96e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =.96e6;
                        //            openair0_cfg[0].rx_gain[0] -= 12;
                        break;
                    case 25:
                        openair0_cfg[UE->rf_map.card].sample_rate =7.68e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =2.5e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =2.5e6;
                        //            openair0_cfg[0].rx_gain[0] -= 6;
                        break;
                    case 50:
                        openair0_cfg[UE->rf_map.card].sample_rate =15.36e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =5.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =5.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 3;
                        break;
                    case 100:
                        openair0_cfg[UE->rf_map.card].sample_rate=30.72e6;
                        openair0_cfg[UE->rf_map.card].rx_bw=10.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw=10.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 0;
                        break;
                    }

500 501 502 503 504 505 506 507 508 509 510
		if (UE->mode != loop_through_memory) {
		  UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
		  //UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
		  //UE->rfdevice.trx_stop_func(&UE->rfdevice);
		  // sleep(1);
		  //nr_init_frame_parms_ue(&UE->frame_parms);
		  /*if (UE->rfdevice.trx_start_func(&UE->rfdevice) != 0 ) {
		    LOG_E(HW,"Could not start the device\n");
		    oai_exit=1;
                  }*/
		}
511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545

		if (UE->UE_scan_carrier == 1) {

		  UE->UE_scan_carrier = 0;
                } else {
                    AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                    UE->is_synchronized = 1;
                    AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

                    if( UE->mode == rx_dump_frame ) {
                        FILE *fd;
                        if ((UE->proc.proc_rxtx[0].frame_rx&1) == 0) {  // this guarantees SIB1 is present
                            if ((fd = fopen("rxsig_frame0.dat","w")) != NULL) {
                                fwrite((void*)&UE->common_vars.rxdata[0][0],
                                       sizeof(int32_t),
                                       10*UE->frame_parms.samples_per_subframe,
                                       fd);
                                LOG_I(PHY,"Dummping Frame ... bye bye \n");
                                fclose(fd);
                                exit(0);
                            } else {
                                LOG_E(PHY,"Cannot open file for writing\n");
                                exit(0);
                            }
                        } else {
                            AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                            UE->is_synchronized = 0;
                            AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

                        }
                    }
                }
            } else {
                // initial sync failed
                // calculate new offset and try again
546
	      
547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567
                if (UE->UE_scan_carrier == 1) {
                    if (freq_offset >= 0)
                        freq_offset += 100;
                    freq_offset *= -1;

                    if (abs(freq_offset) > 7500) {
                        LOG_I( PHY, "[initial_sync] No cell synchronization found, abandoning\n" );
                        FILE *fd;
                        if ((fd = fopen("rxsig_frame0.dat","w"))!=NULL) {
                            fwrite((void*)&UE->common_vars.rxdata[0][0],
                                   sizeof(int32_t),
                                   10*UE->frame_parms.samples_per_subframe,
                                   fd);
                            LOG_I(PHY,"Dummping Frame ... bye bye \n");
                            fclose(fd);
                            exit(0);
                        }
                        //mac_xface->macphy_exit("No cell synchronization found, abandoning"); new mac
                        return &UE_thread_synch_retval; // not reached
                    }
                }
568

569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589
#if DISABLE_LOG_X
                printf("[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
#else
                LOG_I(PHY, "[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
#endif

                for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                    openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
                    if (UE->UE_scan_carrier==1)
                        openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }
590 591
		if (UE->mode != loop_through_memory)
		  UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
592 593 594 595 596 597 598
            }// initial_sync=0
            break;
        case si:
        default:
            break;
        }

599
#if 0 //defined XFORMS
600 601 602 603 604 605 606 607
	if (do_forms) {
	  extern FD_lte_phy_scope_ue  *form_ue[NUMBER_OF_UE_MAX];
	  
	  phy_scope_UE(form_ue[0],
		       PHY_vars_UE_g[0][0],
		       0,0,7);
	}
#endif
608

609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        // indicate readiness
        UE->proc.instance_cnt_synch--;
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_UE_THREAD_SYNCH, 0 );
    }  // while !oai_exit

    return &UE_thread_synch_retval;
}

/*!
 * \brief This is the UE thread for RX subframe n and TX subframe n+4.
 * This thread performs the phy_procedures_UE_RX() on every received slot.
 * then, if TX is enabled it performs TX for n+4.
 * \param arg is a pointer to a \ref PHY_VARS_NR_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */

static void *UE_thread_rxn_txnp4(void *arg) {
    static __thread int UE_thread_rxtx_retval;
    struct nr_rxtx_thread_data *rtd = arg;
    UE_nr_rxtx_proc_t *proc = rtd->proc;
    PHY_VARS_NR_UE    *UE   = rtd->UE;
    int ret;

    //proc->counter_decoder = 0;
    proc->instance_cnt_rxtx=-1;
    proc->subframe_rx=proc->sub_frame_start;

	proc->dci_err_cnt=0;
    char threadname[256];
    sprintf(threadname,"UE_%d_proc_%d", UE->Mod_id, proc->sub_frame_start);
    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    char timing_proc_name[256];
    sprintf(timing_proc_name,"Delay to process sub-frame proc %d",proc->sub_frame_start);

    if ( (proc->sub_frame_start+1)%RX_NB_TH == 0 && threads.one != -1 )
        CPU_SET(threads.one, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 1 && threads.two != -1 )
        CPU_SET(threads.two, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 2 && threads.three != -1 )
        CPU_SET(threads.three, &cpuset);
            //CPU_SET(threads.three, &cpuset);
    init_thread(900000,1000000 , FIFO_PRIORITY-1, &cpuset,
                threadname);

    while (!oai_exit) {
        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("nothing to add");
        }
        while (proc->instance_cnt_rxtx < 0) {
          // most of the time, the thread is waiting here
          pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
        }
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXn_TXnp4\n" );
          exit_fun("nothing to add");
        }

//        initRefTimes(t2);
672 673
//        initRefTimes(t3);
//        pickTime(current);
674 675 676
//        updateTimes(proc->gotIQs, &t2, 10000, "Delay to wake up UE_Thread_Rx (case 2)");

        // Process Rx data for one sub-frame
677
        if (slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx) & NR_DOWNLINK_SLOT) {
Jacques's avatar
Jacques committed
678

679 680 681 682 683
            //clean previous FAPI MESSAGE
            UE->rx_ind.number_pdus = 0;
            UE->dci_ind.number_of_dcis = 0;
            //clean previous FAPI MESSAGE

684
#ifdef UE_SLOT_PARALLELISATION
685
            phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
686
#else
687
            phy_procedures_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay);
688
            //printf(">>> nr_ue_pdcch_procedures ended\n");
689 690 691 692 693 694
#endif
        }

#if UE_TIMING_TRACE
        start_meas(&UE->generic_stat);
#endif
695
	//printf(">>> mac init\n");
696

697 698
        if (UE->mac_enabled==1) {

699 700 701 702 703 704 705
            //  trigger L2 to run ue_scheduler thru IF module
            //  [TODO] mapping right after NR initial sync
            if(1)
            if(UE->if_inst != NULL && UE->if_inst->ul_indication != NULL){
                UE->ul_indication.module_id = 0;
                UE->ul_indication.gNB_index = 0;
                UE->ul_indication.cc_id = 0;
706 707
                UE->ul_indication.slot = 0;     //  to be fill
                UE->ul_indication.frame = 0;    //  to be fill
708
                //  [TODO] mapping right after NR initial sync
hongzhi wang's avatar
hongzhi wang committed
709 710
                UE->ul_indication.frame = proc->frame_rx; 
                UE->ul_indication.slot = proc->nr_tti_rx;
711 712 713 714 715 716
                
                UE->if_inst->ul_indication(&UE->ul_indication);
            }



717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765
#ifdef NEW_MAC
          ret = mac_xface->ue_scheduler(UE->Mod_id,
                                          proc->frame_rx,
                                          proc->subframe_rx,
                                          proc->nr_tti_rx,
                                          proc->frame_tx,
                                          proc->subframe_tx,
                                          proc->nr_tti_tx%(UE->frame_parms.ttis_per_subframe),
#ifndef NO_RAT_NR
                                          slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx),
#else
                                          subframe_select(&UE->frame_parms,proc->subframe_tx),
#endif
                                          0,
                                          0/*FIXME CC_id*/);
#endif

/*#else
            ret = mac_xface->ue_scheduler(UE->Mod_id,
                                          proc->frame_rx,
                                          proc->subframe_rx,
                                          proc->frame_tx,
                                          proc->subframe_tx,
                                          subframe_select(&UE->frame_parms,proc->subframe_tx),
                                          0,  */
//                                          0/*FIXME CC_id*/);
//#endif
            if ( ret != CONNECTION_OK) {
                char *txt;
                switch (ret) {
                case CONNECTION_LOST:
                    txt="RRC Connection lost, returning to PRACH";
                    break;
                case PHY_RESYNCH:
                    txt="RRC Connection lost, trying to resynch";
                    break;
                case RESYNCH:
                    txt="return to PRACH and perform a contention-free access";
                    break;
                default:
                    txt="UNKNOWN RETURN CODE";
                };
                LOG_E( PHY, "[UE %"PRIu8"] Frame %"PRIu32", subframe %u %s\n",
                       UE->Mod_id, proc->frame_rx, proc->subframe_tx,txt );
            }
        }
#if UE_TIMING_TRACE
        stop_meas(&UE->generic_stat);
#endif
766
	//printf(">>> mac ended\n");
767 768

        // Prepare the future Tx data
769
#if 0
770 771 772
#ifndef NO_RAT_NR
        if (slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx) & NR_UPLINK_SLOT)
#else
773 774
        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
                (UE->frame_parms.frame_type == FDD) )
Jacques's avatar
Jacques committed
775
#endif
776
            if (UE->mode != loop_through_memory)
Agustin's avatar
Agustin committed
777 778
                phy_procedures_nrUE_TX(UE,proc,0,0,UE->mode,no_relay);
                //phy_procedures_UE_TX(UE,proc,0,0,UE->mode,no_relay);
779
#endif
hongzhi wang's avatar
hongzhi wang committed
780
#if 0
781 782 783
        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_S) &&
                (UE->frame_parms.frame_type == TDD))
            if (UE->mode != loop_through_memory)
784
                //phy_procedures_UE_S_TX(UE,0,0,no_relay);
785
        updateTimes(current, &t3, 10000, timing_proc_name);
hongzhi wang's avatar
hongzhi wang committed
786
#endif
787 788 789 790 791 792

        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
        proc->instance_cnt_rxtx--;
793 794 795
#if BASIC_SIMULATOR
    if (pthread_cond_signal(&proc->cond_rxtx) != 0) abort();
#endif
796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
    }

// thread finished
    free(arg);
    return &UE_thread_rxtx_retval;
}

/*!
 * \brief This is the main UE thread.
 * This thread controls the other three UE threads:
 * - UE_thread_rxn_txnp4 (even subframes)
 * - UE_thread_rxn_txnp4 (odd subframes)
 * - UE_thread_synch
 * \param arg unused
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */

void *UE_thread(void *arg) {

    PHY_VARS_NR_UE *UE = (PHY_VARS_NR_UE *) arg;
    //  int tx_enabled = 0;
821
    int dummy_rx[UE->frame_parms.nb_antennas_rx][UE->frame_parms.samples_per_subframe] __attribute__((aligned(32)));
hongzhi wang's avatar
hongzhi wang committed
822
    openair0_timestamp timestamp;
823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839
    void* rxp[NB_ANTENNAS_RX], *txp[NB_ANTENNAS_TX];
    int start_rx_stream = 0;
    int i;
    char threadname[128];
    int th_id;
    UE->proc.proc_rxtx[0].counter_decoder = 0;
    UE->proc.proc_rxtx[1].counter_decoder = 0;
    UE->proc.proc_rxtx[2].counter_decoder = 0;

    static uint8_t thread_idx = 0;

    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    if ( threads.iq != -1 )
        CPU_SET(threads.iq, &cpuset);
    init_thread(100000, 500000, FIFO_PRIORITY, &cpuset,
                "UHD Threads");
840
    if ((oaisim_flag == 0) && (UE->mode !=loop_through_memory))
841 842 843 844 845 846 847
        AssertFatal(0== openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]), "");
    UE->rfdevice.host_type = RAU_HOST;
    sprintf(threadname, "Main UE %d", UE->Mod_id);
    pthread_setname_np(pthread_self(), threadname);
    init_UE_threads(UE);

#ifdef NAS_UE
848
    //MessageDef *message_p;
hongzhi wang's avatar
hongzhi wang committed
849 850
    //message_p = itti_alloc_new_message(TASK_NAS_UE, INITIALIZE_MESSAGE);
    //itti_send_msg_to_task (TASK_NAS_UE, UE->Mod_id + NB_eNB_INST, message_p);
851 852
#endif

853
    int subframe_nr=-1;
854
    //int cumulated_shift=0;
855 856
    if ((oaisim_flag == 0) && (UE->mode != loop_through_memory))
      AssertFatal(UE->rfdevice.trx_start_func(&UE->rfdevice) == 0, "Could not start the device\n");
857 858 859 860 861 862 863
    while (!oai_exit) {
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        int instance_cnt_synch = UE->proc.instance_cnt_synch;
        int is_synchronized    = UE->is_synchronized;
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        if (is_synchronized == 0) {
864
#if BASIC_SIMULATOR
865 866 867 868
	  while (!((instance_cnt_synch = UE->proc.instance_cnt_synch) < 0)) {
	    printf("ue sync not ready\n");
	    usleep(500*1000);
	  }
hongzhi wang's avatar
hongzhi wang committed
869 870
#endif

871 872 873 874 875 876
            if (instance_cnt_synch < 0) {  // we can invoke the synch
                // grab 10 ms of signal and wakeup synch thread
                for (int i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                    rxp[i] = (void*)&UE->common_vars.rxdata[i][0];

                if (UE->mode != loop_through_memory)
877
                    AssertFatal( UE->frame_parms.samples_per_subframe*10==
878 879 880
                                 UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                            &timestamp,
                                                            rxp,
881
                                                            UE->frame_parms.samples_per_subframe*10,
882
                                                            UE->frame_parms.nb_antennas_rx), "error reading samples");
883

884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901
		AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                instance_cnt_synch = ++UE->proc.instance_cnt_synch;
                if (instance_cnt_synch == 0) {
                    AssertFatal( 0 == pthread_cond_signal(&UE->proc.cond_synch), "");
                } else {
                    LOG_E( PHY, "[SCHED][UE] UE sync thread busy!!\n" );
                    exit_fun("nothing to add");
                }
		AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");
            } else {
#if OAISIM
              (void)dummy_rx; /* avoid gcc warnings */
              usleep(500);
#else
                // grab 10 ms of signal into dummy buffer
                if (UE->mode != loop_through_memory) {
                    for (int i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                        rxp[i] = (void*)&dummy_rx[i][0];
902
                    for (int sf=0; sf<NR_NUMBER_OF_SUBFRAMES_PER_FRAME; sf++)
903
                        //	    printf("Reading dummy sf %d\n",sf);
904 905 906 907 908 909
		      AssertFatal(UE->frame_parms.samples_per_subframe==
				 UE->rfdevice.trx_read_func(&UE->rfdevice,
							    &timestamp,
							    rxp,
							    UE->frame_parms.samples_per_subframe,
							    UE->frame_parms.nb_antennas_rx), "error reading samples");
910 911 912 913 914 915 916 917 918 919
                }
#endif
            }

        } // UE->is_synchronized==0
        else {
            if (start_rx_stream==0) {
                start_rx_stream=1;
                if (UE->mode != loop_through_memory) {
                    if (UE->no_timing_correction==0) {
920
                        LOG_I(PHY,"Resynchronizing RX by %d samples (mode = %d)\n",UE->rx_offset,UE->mode);
921 922 923 924 925 926 927 928 929
                        AssertFatal(UE->rx_offset ==
                                    UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                               &timestamp,
                                                               (void**)UE->common_vars.rxdata,
                                                               UE->rx_offset,
                                                               UE->frame_parms.nb_antennas_rx),"");
                    }
                    UE->rx_offset=0;
                    UE->time_sync_cell=0;
930
                    UE->proc.proc_rxtx[0].frame_rx++;
931
                    //UE->proc.proc_rxtx[1].frame_rx++;
932 933
                    for (th_id=1; th_id < RX_NB_TH; th_id++) {
                        UE->proc.proc_rxtx[th_id].frame_rx = UE->proc.proc_rxtx[0].frame_rx;
934
                    }
935 936
                    
                    //printf("first stream frame rx %d\n",UE->proc.proc_rxtx[0].frame_rx);
937 938 939 940 941 942 943 944

                    // read in first symbol
                    AssertFatal (UE->frame_parms.ofdm_symbol_size+UE->frame_parms.nb_prefix_samples0 ==
                                 UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                            &timestamp,
                                                            (void**)UE->common_vars.rxdata,
                                                            UE->frame_parms.ofdm_symbol_size+UE->frame_parms.nb_prefix_samples0,
                                                            UE->frame_parms.nb_antennas_rx),"");
945 946
                    //write_output("txdata_sym.m", "txdata_sym", UE->common_vars.rxdata[0], (UE->frame_parms.ofdm_symbol_size+UE->frame_parms.nb_prefix_samples0), 1, 1);
                    //nr_slot_fep(UE,0, 0, 0, 1, 1, NR_PDCCH_EST);
947 948 949 950 951
                } //UE->mode != loop_through_memory
                else
                    rt_sleep_ns(1000*1000);

            } else {
952 953 954 955
                thread_idx++;
                if(thread_idx>=RX_NB_TH)
                    thread_idx = 0;

956 957
                subframe_nr++;
                subframe_nr %= NR_NUMBER_OF_SUBFRAMES_PER_FRAME;               
958 959
                UE_nr_rxtx_proc_t *proc = &UE->proc.proc_rxtx[thread_idx];
                // update thread index for received subframe
960
                UE->current_thread_id[subframe_nr] = thread_idx;
961

962 963 964
#if BASIC_SIMULATOR
                {
                  int t;
965
                  for (t = 0; t < RX_NB_TH; t++) {
966 967 968 969 970 971 972
                        UE_rxtx_proc_t *proc = &UE->proc.proc_rxtx[t];
                        pthread_mutex_lock(&proc->mutex_rxtx);
                        while (proc->instance_cnt_rxtx >= 0) pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
                        pthread_mutex_unlock(&proc->mutex_rxtx);
                  }
                }
#endif
973

974
                LOG_D(PHY,"Process subframe %d thread Idx %d \n", subframe_nr, UE->current_thread_id[subframe_nr]);
975 976 977 978 979 980


                if (UE->mode != loop_through_memory) {
                    for (i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                        rxp[i] = (void*)&UE->common_vars.rxdata[i][UE->frame_parms.ofdm_symbol_size+
                                 UE->frame_parms.nb_prefix_samples0+
981
                                 subframe_nr*UE->frame_parms.samples_per_subframe];
982
                    for (i=0; i<UE->frame_parms.nb_antennas_tx; i++)
983
		      txp[i] = (void*)&UE->common_vars.txdata[i][((subframe_nr+2)%NR_NUMBER_OF_SUBFRAMES_PER_FRAME)*UE->frame_parms.samples_per_subframe];
984 985

                    int readBlockSize, writeBlockSize;
986 987 988
                    if (subframe_nr<(NR_NUMBER_OF_SUBFRAMES_PER_FRAME - 1)) {
                        readBlockSize=UE->frame_parms.samples_per_subframe;
                        writeBlockSize=UE->frame_parms.samples_per_subframe;
989 990 991 992 993 994 995 996
                    } else {
                        // set TO compensation to zero
                        UE->rx_offset_diff = 0;
                        // compute TO compensation that should be applied for this frame
                        if ( UE->rx_offset < 5*UE->frame_parms.samples_per_subframe  &&
                                UE->rx_offset > 0 )
                            UE->rx_offset_diff = -1 ;
                        if ( UE->rx_offset > 5*UE->frame_parms.samples_per_subframe &&
997
                                UE->rx_offset < 10*UE->frame_parms.samples_per_subframe )
998 999
                            UE->rx_offset_diff = 1;

1000 1001
                        LOG_D(PHY,"AbsSubframe %d.%d TTI SET rx_off_diff to %d rx_offset %d \n",proc->frame_rx,subframe_nr,UE->rx_offset_diff,UE->rx_offset);
                        readBlockSize=UE->frame_parms.samples_per_subframe -
1002 1003 1004
                                      UE->frame_parms.ofdm_symbol_size -
                                      UE->frame_parms.nb_prefix_samples0 -
                                      UE->rx_offset_diff;
1005
                        writeBlockSize=UE->frame_parms.samples_per_subframe -
1006 1007 1008
                                       UE->rx_offset_diff;
                    }

1009
                    AssertFatal(readBlockSize ==
1010 1011 1012 1013 1014 1015 1016 1017
                                UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                           &timestamp,
                                                           rxp,
                                                           readBlockSize,
                                                           UE->frame_parms.nb_antennas_rx),"");
                    AssertFatal( writeBlockSize ==
                                 UE->rfdevice.trx_write_func(&UE->rfdevice,
                                         timestamp+
1018
                                         (2*UE->frame_parms.samples_per_subframe) -
1019 1020 1021 1022 1023
                                         UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
                                         openair0_cfg[0].tx_sample_advance,
                                         txp,
                                         writeBlockSize,
                                         UE->frame_parms.nb_antennas_tx,
1024 1025
                                         1),"");
		    
1026
                    if( subframe_nr==(NR_NUMBER_OF_SUBFRAMES_PER_FRAME-1)) {
1027 1028 1029
                        // read in first symbol of next frame and adjust for timing drift
                        int first_symbols=writeBlockSize-readBlockSize;
                        if ( first_symbols > 0 )
1030
                            AssertFatal(first_symbols ==
1031
                                        UE->rfdevice.trx_read_func(&UE->rfdevice,
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1032
                                                                   &timestamp,
1033 1034
                                                                   (void**)UE->common_vars.rxdata,
                                                                   first_symbols,
1035
                                                                   UE->frame_parms.nb_antennas_rx),"");
1036 1037 1038
                        if ( first_symbols <0 )
                            LOG_E(PHY,"can't compensate: diff =%d\n", first_symbols);
                    }
1039

1040 1041 1042
                    pickTime(gotIQs);
                    // operate on thread sf mod 2
                    AssertFatal(pthread_mutex_lock(&proc->mutex_rxtx) ==0,"");
1043
                    if(subframe_nr == 0) {
1044
                        UE->proc.proc_rxtx[0].frame_rx++;
1045
                        //UE->proc.proc_rxtx[1].frame_rx++;
1046 1047
                        for (th_id=1; th_id < RX_NB_TH; th_id++) {
                            UE->proc.proc_rxtx[th_id].frame_rx = UE->proc.proc_rxtx[0].frame_rx;
1048 1049
                        }
#ifdef SAIF_ENABLED
1050 1051 1052 1053 1054 1055 1056
			if (!(proc->frame_rx%4000))
			  {
			    printf("frame_rx=%d rx_thread_busy=%ld - rate %8.3f\n",
				   proc->frame_rx, g_ue_rx_thread_busy,
				   (float)g_ue_rx_thread_busy/(proc->frame_rx*10+1)*100.0);
			    fflush(stdout);
			  }
1057 1058 1059 1060 1061 1062 1063
#endif
                    }
                    //UE->proc.proc_rxtx[0].gotIQs=readTime(gotIQs);
                    //UE->proc.proc_rxtx[1].gotIQs=readTime(gotIQs);
                    for (th_id=0; th_id < RX_NB_TH; th_id++) {
                        UE->proc.proc_rxtx[th_id].gotIQs=readTime(gotIQs);
                    }
1064

1065 1066
                    proc->nr_tti_rx=subframe_nr;
                    proc->subframe_rx=subframe_nr;
1067
		    
1068
                    proc->frame_tx = proc->frame_rx;
1069 1070
                    proc->nr_tti_tx= subframe_nr + DURATION_RX_TO_TX;
                    if (proc->nr_tti_tx > NR_NUMBER_OF_SUBFRAMES_PER_FRAME) {
1071
                      proc->frame_tx = (proc->frame_tx + 1)%MAX_FRAME_NUMBER;
1072
                      proc->nr_tti_tx %= NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
1073
                    }
1074
                    proc->subframe_tx=proc->nr_tti_rx;
1075
                    proc->timestamp_tx = timestamp+
1076
                                         (DURATION_RX_TO_TX*UE->frame_parms.samples_per_subframe)-
1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095
                                         UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0;

                    proc->instance_cnt_rxtx++;
                    LOG_D( PHY, "[SCHED][UE %d] UE RX instance_cnt_rxtx %d subframe %d !!\n", UE->Mod_id, proc->instance_cnt_rxtx,proc->subframe_rx);
                    if (proc->instance_cnt_rxtx == 0) {
                      if (pthread_cond_signal(&proc->cond_rxtx) != 0) {
                        LOG_E( PHY, "[SCHED][UE %d] ERROR pthread_cond_signal for UE RX thread\n", UE->Mod_id);
                        exit_fun("nothing to add");
                      }
                    } else {
#ifdef SAIF_ENABLED
						g_ue_rx_thread_busy++;
#endif
                      LOG_E( PHY, "[SCHED][UE %d] !! UE RX thread busy (IC %d)!!\n", UE->Mod_id, proc->instance_cnt_rxtx);
                      if (proc->instance_cnt_rxtx > 4)
                      {
                        char exit_fun_string[256];
                        sprintf(exit_fun_string,"[SCHED][UE %d] !!! UE instance_cnt_rxtx > 2 (IC %d) (Proc %d)!!",
                        			UE->Mod_id, proc->instance_cnt_rxtx,
1096
                        			UE->current_thread_id[subframe_nr]);
1097 1098 1099
          				printf("%s\n",exit_fun_string);
          				fflush(stdout);
          				sleep(1);
1100
					exit_fun(exit_fun_string);
1101 1102 1103 1104 1105 1106 1107 1108 1109
                      }
                    }

                    AssertFatal (pthread_cond_signal(&proc->cond_rxtx) ==0 ,"");
                    AssertFatal(pthread_mutex_unlock(&proc->mutex_rxtx) ==0,"");
//                    initRefTimes(t1);
//                    initStaticTime(lastTime);
//                    updateTimes(lastTime, &t1, 20000, "Delay between two IQ acquisitions (case 1)");
//                    pickStaticTime(lastTime);
1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140
                } //UE->mode != loop_through_memory
                else {
                    proc->nr_tti_rx=subframe_nr;
                    proc->subframe_rx=subframe_nr;
		    if(subframe_nr == 0) {
		      for (th_id=0; th_id < RX_NB_TH; th_id++) {
			UE->proc.proc_rxtx[th_id].frame_rx++;
		      }
		    }
                    proc->frame_tx = proc->frame_rx;
                    proc->nr_tti_tx= subframe_nr + DURATION_RX_TO_TX;
                    if (proc->nr_tti_tx > NR_NUMBER_OF_SUBFRAMES_PER_FRAME) {
                      proc->frame_tx = (proc->frame_tx + 1)%MAX_FRAME_NUMBER;
                      proc->nr_tti_tx %= NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
                    }
                    proc->subframe_tx=proc->nr_tti_tx;

                    printf("Processing subframe %d\n",proc->subframe_rx);

		    if(UE->if_inst != NULL && UE->if_inst->ul_indication != NULL){
		      UE->ul_indication.module_id = 0;
		      UE->ul_indication.gNB_index = 0;
		      UE->ul_indication.cc_id = 0;
		      UE->ul_indication.slot = 0;     //  to be fill
		      UE->ul_indication.frame = 0;    //  to be fill
		      //  [TODO] mapping right after NR initial sync
		      UE->ul_indication.frame = proc->frame_rx; 
		      UE->ul_indication.slot = proc->nr_tti_rx;
		      
		      UE->if_inst->ul_indication(&UE->ul_indication);
		    }
1141

1142 1143 1144
		    phy_procedures_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay);
		    getchar();
		} // else loop_through_memory
1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171
            } // start_rx_stream==1
        } // UE->is_synchronized==1

    } // while !oai_exit
    return NULL;
}

/*!
 * \brief Initialize the UE theads.
 * Creates the UE threads:
 * - UE_thread_rxtx0
 * - UE_thread_rxtx1
 * - UE_thread_synch
 * - UE_thread_fep_slot0
 * - UE_thread_fep_slot1
 * - UE_thread_dlsch_proc_slot0
 * - UE_thread_dlsch_proc_slot1
 * and the locking between them.
 */
void init_UE_threads(PHY_VARS_NR_UE *UE) {
    struct nr_rxtx_thread_data *rtd;

    pthread_attr_init (&UE->proc.attr_ue);
    pthread_attr_setstacksize(&UE->proc.attr_ue,8192);//5*PTHREAD_STACK_MIN);

    pthread_mutex_init(&UE->proc.mutex_synch,NULL);
    pthread_cond_init(&UE->proc.cond_synch,NULL);
1172
    UE->proc.instance_cnt_synch = -1;
1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191

    // the threads are not yet active, therefore access is allowed without locking
    int nb_threads=RX_NB_TH;
    for (int i=0; i<nb_threads; i++) {
        rtd = calloc(1, sizeof(struct nr_rxtx_thread_data));
        if (rtd == NULL) abort();
        rtd->UE = UE;
        rtd->proc = &UE->proc.proc_rxtx[i];

        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_rxtx,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_rxtx,NULL);
        UE->proc.proc_rxtx[i].sub_frame_start=i;
        UE->proc.proc_rxtx[i].sub_frame_step=nb_threads;
        printf("Init_UE_threads rtd %d proc %d nb_threads %d i %d\n",rtd->proc->sub_frame_start, UE->proc.proc_rxtx[i].sub_frame_start,nb_threads, i);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_rxtx, NULL, UE_thread_rxn_txnp4, rtd);

#ifdef UE_DLSCH_PARALLELISATION
        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_dlsch_td,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_dlsch_td,NULL);
1192
        pthread_create(&UE->proc.proc_rxtx[i].pthread_dlsch_td,NULL,nr_dlsch_decoding_2thread0, rtd);
1193 1194 1195
        //thread 2
        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_dlsch_td1,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_dlsch_td1,NULL);
1196
        pthread_create(&UE->proc.proc_rxtx[i].pthread_dlsch_td1,NULL,nr_dlsch_decoding_2thread1, rtd);
1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214
#endif

#ifdef UE_SLOT_PARALLELISATION
        //pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_slot0_dl_processing,NULL);
        //pthread_cond_init(&UE->proc.proc_rxtx[i].cond_slot0_dl_processing,NULL);
        //pthread_create(&UE->proc.proc_rxtx[i].pthread_slot0_dl_processing,NULL,UE_thread_slot0_dl_processing, rtd);

        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_slot1_dl_processing,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_slot1_dl_processing,NULL);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_slot1_dl_processing,NULL,UE_thread_slot1_dl_processing, rtd);
#endif

    }
    pthread_create(&UE->proc.pthread_synch,NULL,UE_thread_synch,(void*)UE);
}


#ifdef OPENAIR2
1215
/*
1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241
void fill_ue_band_info(void) {

    UE_EUTRA_Capability_t *UE_EUTRA_Capability = UE_rrc_inst[0].UECap->UE_EUTRA_Capability;
    int i,j;

    bands_to_scan.nbands = UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.count;

    for (i=0; i<bands_to_scan.nbands; i++) {

        for (j=0; j<sizeof (eutra_bands) / sizeof (eutra_bands[0]); j++)
            if (eutra_bands[j].band == UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.array[i]->bandEUTRA) {
                memcpy(&bands_to_scan.band_info[i],
                       &eutra_bands[j],
                       sizeof(eutra_band_t));

                printf("Band %d (%lu) : DL %u..%u Hz, UL %u..%u Hz, Duplex %s \n",
                       bands_to_scan.band_info[i].band,
                       UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.array[i]->bandEUTRA,
                       bands_to_scan.band_info[i].dl_min,
                       bands_to_scan.band_info[i].dl_max,
                       bands_to_scan.band_info[i].ul_min,
                       bands_to_scan.band_info[i].ul_max,
                       (bands_to_scan.band_info[i].frame_type==FDD) ? "FDD" : "TDD");
                break;
            }
    }
1242
}*/
1243 1244
#endif

1245
/*
1246 1247 1248
int setup_ue_buffers(PHY_VARS_NR_UE **phy_vars_ue, openair0_config_t *openair0_cfg) {

    int i, CC_id;
Hongzhi Wang's avatar
Hongzhi Wang committed
1249
    NR_DL_FRAME_PARMS *frame_parms;
1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284
    openair0_rf_map *rf_map;

    for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
        rf_map = &phy_vars_ue[CC_id]->rf_map;

        AssertFatal( phy_vars_ue[CC_id] !=0, "");
        frame_parms = &(phy_vars_ue[CC_id]->frame_parms);

        // replace RX signal buffers with mmaped HW versions
        rxdata = (int32_t**)malloc16( frame_parms->nb_antennas_rx*sizeof(int32_t*) );
        txdata = (int32_t**)malloc16( frame_parms->nb_antennas_tx*sizeof(int32_t*) );

        for (i=0; i<frame_parms->nb_antennas_rx; i++) {
            LOG_I(PHY, "Mapping UE CC_id %d, rx_ant %d, freq %u on card %d, chain %d\n",
                  CC_id, i, downlink_frequency[CC_id][i], rf_map->card, rf_map->chain+i );
            free( phy_vars_ue[CC_id]->common_vars.rxdata[i] );
            rxdata[i] = (int32_t*)malloc16_clear( 307200*sizeof(int32_t) );
            phy_vars_ue[CC_id]->common_vars.rxdata[i] = rxdata[i]; // what about the "-N_TA_offset" ? // N_TA offset for TDD
        }

        for (i=0; i<frame_parms->nb_antennas_tx; i++) {
            LOG_I(PHY, "Mapping UE CC_id %d, tx_ant %d, freq %u on card %d, chain %d\n",
                  CC_id, i, downlink_frequency[CC_id][i], rf_map->card, rf_map->chain+i );
            free( phy_vars_ue[CC_id]->common_vars.txdata[i] );
            txdata[i] = (int32_t*)malloc16_clear( 307200*sizeof(int32_t) );
            phy_vars_ue[CC_id]->common_vars.txdata[i] = txdata[i];
        }

        // rxdata[x] points now to the same memory region as phy_vars_ue[CC_id]->common_vars.rxdata[x]
        // txdata[x] points now to the same memory region as phy_vars_ue[CC_id]->common_vars.txdata[x]
        // be careful when releasing memory!
        // because no "release_ue_buffers"-function is available, at least rxdata and txdata memory will leak (only some bytes)
    }
    return 0;
}
1285
*/