• rmagueta's avatar
    Merge remote-tracking branch 'origin/NR_SA_F1AP_5GRECORDS' into develop-NR_SA_F1AP_5GRECORDS-lts2 · e238e786
    rmagueta authored
    # Conflicts:
    #	cmake_targets/CMakeLists.txt
    #	cmake_targets/build_oai
    #	cmake_targets/tools/build_helper
    #	executables/nr-gnb.c
    #	openair1/PHY/INIT/nr_init_ru.c
    #	openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c
    #	openair1/PHY/NR_TRANSPORT/nr_ulsch.c
    #	openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
    #	openair1/PHY/NR_UE_TRANSPORT/nr_prach.c
    #	openair1/SCHED_NR/phy_procedures_nr_gNB.c
    #	openair1/SCHED_NR_UE/pucch_uci_ue_nr.c
    #	openair2/F1AP/f1ap_du_rrc_message_transfer.c
    #	openair2/F1AP/f1ap_du_rrc_message_transfer.h
    #	openair2/F1AP/f1ap_du_task.c
    #	openair2/GNB_APP/gnb_app.c
    #	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
    #	openair2/LAYER2/NR_MAC_gNB/config.c
    #	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c
    #	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c
    #	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c
    #	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c
    #	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c
    #	openair2/LAYER2/nr_pdcp/nr_pdcp_entity.c
    #	openair2/LAYER2/nr_pdcp/nr_pdcp_oai_api.c
    #	openair2/RRC/LTE/rrc_eNB_GTPV1U.c
    #	openair2/RRC/NR/L2_nr_interface.c
    #	openair2/RRC/NR/MESSAGES/asn1_msg.c
    #	openair2/RRC/NR/rrc_gNB.c
    #	openair2/RRC/NR/rrc_gNB_NGAP.c
    #	openair2/RRC/NR_UE/rrc_UE.c
    #	openair3/NAS/NR_UE/nr_nas_msg_sim.c
    #	openair3/ocp-gtpu/gtp_itf.cpp
    #	targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
    e238e786
usrp_lib.cpp 48.2 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

/** usrp_lib.cpp
 *
 * \author: HongliangXU : hong-liang-xu@agilent.com
 */
#define _LARGEFILE_SOURCE
#define _FILE_OFFSET_BITS 64
#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/version.hpp>
#if UHD_VERSION < 3110000
  #include <uhd/utils/thread_priority.hpp>
#else
  #include <uhd/utils/thread.hpp>
#endif
#include <uhd/usrp/multi_usrp.hpp>
#include <uhd/version.hpp>
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <boost/thread.hpp>
#include <boost/format.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
#include <time.h>
#include "common/utils/LOG/log.h"
#include "common_lib.h"
#include "assertions.h"

#include "common/utils/LOG/vcd_signal_dumper.h"

#include <sys/resource.h>

#ifdef __SSE4_1__
  #include <smmintrin.h>
#endif

#ifdef __AVX2__
  #include <immintrin.h>
#endif

#ifdef __arm__
  #include <arm_neon.h>
#endif

/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */
int gpio789=0;
extern int usrp_tx_thread;


typedef struct {

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
  //! USRP device pointer
  uhd::usrp::multi_usrp::sptr usrp;

  //create a send streamer and a receive streamer
  //! USRP TX Stream
  uhd::tx_streamer::sptr tx_stream;
  //! USRP RX Stream
  uhd::rx_streamer::sptr rx_stream;

  //! USRP TX Metadata
  uhd::tx_metadata_t tx_md;
  //! USRP RX Metadata
  uhd::rx_metadata_t rx_md;

  //! Sampling rate
  double sample_rate;

  //! TX forward samples. We use usrp_time_offset to get this value
  int tx_forward_nsamps; //166 for 20Mhz

  // --------------------------------
  // Debug and output control
  // --------------------------------
  int num_underflows;
  int num_overflows;
  int num_seq_errors;
  int64_t tx_count;
  int64_t rx_count;
  int wait_for_first_pps;
  int use_gps;
  //int first_tx;
  //int first_rx;
  //! timestamp of RX packet
  openair0_timestamp rx_timestamp;
} usrp_state_t;

//void print_notes(void)
//{
// Helpful notes
//  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
//  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
//  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
//  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
//  std::cout << boost::format("****************************************************************************************************************\n");
//}

int check_ref_locked(usrp_state_t *s,size_t mboard) {
  std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);
  bool ref_locked = false;

  if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end()) {
    std::cout << "Waiting for reference lock..." << std::flush;

    for (int i = 0; i < 30 and not ref_locked; i++) {
      ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();

      if (not ref_locked) {
        std::cout << "." << std::flush;
        boost::this_thread::sleep(boost::posix_time::seconds(1));
      }
    }

    if(ref_locked) {
      std::cout << "LOCKED" << std::endl;
    } else {
      std::cout << "FAILED" << std::endl;
    }
  } else {
    std::cout << boost::format("ref_locked sensor not present on this board.\n");
  }

  return ref_locked;
}

static int sync_to_gps(openair0_device *device) {
  //uhd::set_thread_priority_safe();
  //std::string args;
  //Set up program options
  //po::options_description desc("Allowed options");
  //desc.add_options()
  //("help", "help message")
  //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
  //;
  //po::variables_map vm;
  //po::store(po::parse_command_line(argc, argv, desc), vm);
  //po::notify(vm);
  //Print the help message
  //if (vm.count("help"))
  //{
  //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
  // return EXIT_FAILURE;
  //}
  //Create a USRP device
  //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
  //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
  //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
  usrp_state_t *s = (usrp_state_t *)device->priv;

  try {
    size_t num_mboards = s->usrp->get_num_mboards();
    size_t num_gps_locked = 0;

    for (size_t mboard = 0; mboard < num_mboards; mboard++) {
      std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;
      bool ref_locked = check_ref_locked(s,mboard);

      if (ref_locked) {
        std::cout << boost::format("Ref Locked\n");
      } else {
        std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
        exit(EXIT_FAILURE);
      }

      //Wait for GPS lock
      bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();

      if(gps_locked) {
        num_gps_locked++;
        std::cout << boost::format("GPS Locked\n");
      } else {
        LOG_W(HW,"WARNING:  GPS not locked - time will not be accurate until locked\n");
      }

      //Set to GPS time
      uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
      s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));
      //Wait for it to apply
      //The wait is 2 seconds because N-Series has a known issue where
      //the time at the last PPS does not properly update at the PPS edge
      //when the time is actually set.
      boost::this_thread::sleep(boost::posix_time::seconds(2));
      //Check times
      gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
      std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
      std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
      //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
      //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
      //else
      //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
    }

    if (num_gps_locked == num_mboards and num_mboards > 1) {
      //Check to see if all USRP times are aligned
      //First, wait for PPS.
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();

      while (time_last_pps == s->usrp->get_time_last_pps()) {
        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
      }

      //Sleep a little to make sure all devices have seen a PPS edge
      boost::this_thread::sleep(boost::posix_time::milliseconds(200));
      //Compare times across all mboards
      bool all_matched = true;
      uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);

      for (size_t mboard = 1; mboard < num_mboards; mboard++) {
        uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);

        if (mboard_time != mboard0_time) {
          all_matched = false;
          std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                        % mboard0_time.get_real_secs()
                        % mboard
                        % mboard_time.get_real_secs()) << std::endl;
        }
      }

      if (all_matched) {
        std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
      } else {
        std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
      }
    }
  } catch (std::exception &e) {
    std::cout << boost::format("\nError: %s") % e.what();
    std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
    std::cout << boost::format("Visit one of these pages if the problem persists:\n");
    std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
    std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
    std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
    exit(EXIT_FAILURE);
  }

  return EXIT_SUCCESS;
}

/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
static int trx_usrp_start(openair0_device *device) {
  usrp_state_t *s = (usrp_state_t *)device->priv;

  // setup GPIO for TDD, GPIO(4) = ATR_RX
  //set data direction register (DDR) to output
  s->usrp->set_gpio_attr("FP0", "DDR", 0xfff, 0xfff);
  //set lower 7 bits to be controlled automatically by ATR (the rest 5 bits are controlled manually)
  s->usrp->set_gpio_attr("FP0", "CTRL", 0x7f,0xfff);
  //set pins 4 (RX_TX_Switch) and 6 (Shutdown PA) to 1 when the radio is only receiving (ATR_RX)
  s->usrp->set_gpio_attr("FP0", "ATR_RX", (1<<4)|(1<<6), 0x7f);
  // set pin 5 (Shutdown LNA) to 1 when the radio is transmitting and receiveing (ATR_XX)
  // (we use full duplex here, because our RX is on all the time - this might need to change later)
  s->usrp->set_gpio_attr("FP0", "ATR_XX", (1<<5), 0x7f);
  // set the output pins to 1
  s->usrp->set_gpio_attr("FP0", "OUT", 7<<7, 0xf80);

  s->wait_for_first_pps = 1;
  s->rx_count = 0;
  s->tx_count = 0;
  //s->first_tx = 1;
  //s->first_rx = 1;
  s->rx_timestamp = 0;

  s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));
  // wait for the pps to change
  uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();
  while (time_last_pps == s->usrp->get_time_last_pps()) {
    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
  }

  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
  cmd.time_spec = uhd::time_spec_t(1.0);
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

  return 0;
}
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
 * \param device the hardware to use
 */
static void trx_usrp_end(openair0_device *device) {
  if (device == NULL)
    return;

  usrp_state_t *s = (usrp_state_t *)device->priv;

  if (s == NULL)
    return;
  iqrecorder_end(device);


}

/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at which the first sample MUST be sent
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple antennas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/
static int trx_usrp_write(openair0_device *device,
			  openair0_timestamp timestamp,
			  void **buff,
			  int nsamps,
			  int cc,
			  int flags) {
  int ret=0;
  usrp_state_t *s = (usrp_state_t *)device->priv;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary

  int flags_lsb = flags&0xff;
  int flags_msb = (flags>>8)&0xff;

  int end;
  openair0_thread_t *write_thread = &device->write_thread;
  openair0_write_package_t *write_package = write_thread->write_package;

  AssertFatal( MAX_WRITE_THREAD_BUFFER_SIZE >= cc,"Do not support more than %d cc number\n", MAX_WRITE_THREAD_BUFFER_SIZE);

    boolean_t first_packet_state=false,last_packet_state=false;

    if (flags_lsb == 2) { // start of burst
      //      s->tx_md.start_of_burst = true;
      //      s->tx_md.end_of_burst = false;
      first_packet_state = true;
      last_packet_state  = false;
    } else if (flags_lsb == 3) { // end of burst
      //s->tx_md.start_of_burst = false;
      //s->tx_md.end_of_burst = true;
      first_packet_state = false;
      last_packet_state  = true;
    } else if (flags_lsb == 4) { // start and end
    //  s->tx_md.start_of_burst = true;
    //  s->tx_md.end_of_burst = true;
      first_packet_state = true;
      last_packet_state  = true;
    } else if (flags_lsb==1) { // middle of burst
    //  s->tx_md.start_of_burst = false;
    //  s->tx_md.end_of_burst = false;
      first_packet_state = false;
      last_packet_state  = false;
    }
    else if (flags_lsb==10) { // fail safe mode
     // s->tx_md.has_time_spec = false;
     // s->tx_md.start_of_burst = false;
     // s->tx_md.end_of_burst = true;
     first_packet_state = false;
     last_packet_state  = true;
    }

  if(usrp_tx_thread == 0){
#if defined(__x86_64) || defined(__i386__)
  #ifdef __AVX2__
      nsamps2 = (nsamps+7)>>3;
      __m256i buff_tx[cc<2?2:cc][nsamps2];
  #else
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tx[cc<2?2:cc][nsamps2];
  #endif
#elif defined(__arm__)
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tx[cc<2?2:cc][nsamps2];
#else
#error Unsupported CPU architecture, USRP device cannot be built
#endif

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
        buff_tx[i][j] = _mm256_slli_epi16(((__m256i *)buff[i])[j],4);
#else
        buff_tx[i][j] = _mm_slli_epi16(((__m128i *)buff[i])[j],4);
#endif
#elif defined(__arm__)
        buff_tx[i][j] = vshlq_n_s16(((int16x8_t *)buff[i])[j],4);
#endif
      }
    }

    s->tx_md.has_time_spec  = true;
    s->tx_md.start_of_burst = (s->tx_count==0) ? true : first_packet_state;
    s->tx_md.end_of_burst   = last_packet_state;
    s->tx_md.time_spec      = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_count++;

VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_BEAM_SWITCHING_GPIO,1);
    // bit 3 enables gpio (for backward compatibility)
    if (flags_msb&8) {
      // push GPIO bits 7-9 from flags_msb
      int gpio789=(flags_msb&7)<<7;
      s->usrp->set_command_time(s->tx_md.time_spec);
      s->usrp->set_gpio_attr("FP0", "OUT", gpio789, 0x380);
      s->usrp->clear_command_time();
    }
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_BEAM_SWITCHING_GPIO,0);

    if (cc>1) {
      std::vector<void *> buff_ptrs;

      for (int i=0; i<cc; i++)
        buff_ptrs.push_back(&(((int16_t *)buff_tx[i])[0]));

      ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
    }
    else {
      ret = (int)s->tx_stream->send(&(((int16_t *)buff_tx[0])[0]), nsamps, s->tx_md);
    }

    if (ret != nsamps) LOG_E(HW,"[xmit] tx samples %d != %d\n",ret,nsamps);
    return ret;
  }
  else{
    pthread_mutex_lock(&write_thread->mutex_write);

    if(write_thread->count_write >= MAX_WRITE_THREAD_PACKAGE){
      LOG_W(HW,"Buffer overflow, count_write = %d, start = %d end = %d, resetting write package\n", write_thread->count_write, write_thread->start, write_thread->end);
      write_thread->end = write_thread->start;
      write_thread->count_write = 0;
    }

    end = write_thread->end;
    write_package[end].timestamp    = timestamp;
    write_package[end].nsamps       = nsamps;
    write_package[end].cc           = cc;
    write_package[end].first_packet = first_packet_state;
    write_package[end].last_packet  = last_packet_state;
    write_package[end].flags_msb    = flags_msb;
    for (int i = 0; i < cc; i++)
      write_package[end].buff[i]    = buff[i];
    write_thread->count_write++;
    write_thread->end = (write_thread->end + 1)% MAX_WRITE_THREAD_PACKAGE;
    LOG_D(HW,"Signaling TX TS %llu\n",(unsigned long long)timestamp);
    pthread_cond_signal(&write_thread->cond_write);
    pthread_mutex_unlock(&write_thread->mutex_write);
    return 0;
  }

}

//-----------------------start--------------------------
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at which the first sample MUST be sent
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple antennas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/
void *trx_usrp_write_thread(void * arg){
  int ret=0;
  openair0_device *device=(openair0_device *)arg;
  openair0_thread_t *write_thread = &device->write_thread;
  openair0_write_package_t *write_package = write_thread->write_package;

  usrp_state_t *s;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
  int start;
  openair0_timestamp timestamp;
  void               **buff;
  int                nsamps;
  int                cc;
  signed char        first_packet;
  signed char        last_packet;
  int                flags_msb;

  while(1){
    pthread_mutex_lock(&write_thread->mutex_write);
    while (write_thread->count_write == 0) {
      pthread_cond_wait(&write_thread->cond_write,&write_thread->mutex_write); // this unlocks mutex_rxtx while waiting and then locks it again
    }
    VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE_THREAD, 1 );
    s = (usrp_state_t *)device->priv;
    start = write_thread->start;
    timestamp    = write_package[start].timestamp;
    buff         = write_package[start].buff;
    nsamps       = write_package[start].nsamps;
    cc           = write_package[start].cc;
    first_packet = write_package[start].first_packet;
    last_packet  = write_package[start].last_packet;
    flags_msb    = write_package[start].flags_msb;
    write_thread->start = (write_thread->start + 1)% MAX_WRITE_THREAD_PACKAGE;
    write_thread->count_write--;
    pthread_mutex_unlock(&write_thread->mutex_write);
    /*if(write_thread->count_write != 0){
      LOG_W(HW,"count write = %d, start = %d, end = %d\n", write_thread->count_write, write_thread->start, write_thread->end);
    }*/

    #if defined(__x86_64) || defined(__i386__)
      #ifdef __AVX2__
        nsamps2 = (nsamps+7)>>3;
        __m256i buff_tx[cc<2?2:cc][nsamps2];
      #else
        nsamps2 = (nsamps+3)>>2;
        __m128i buff_tx[cc<2?2:cc][nsamps2];
      #endif
    #elif defined(__arm__)
      nsamps2 = (nsamps+3)>>2;
      int16x8_t buff_tx[cc<2?2:cc][nsamps2];
    #else
    #error Unsupported CPU architecture, USRP device cannot be built
    #endif

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
        #if defined(__x86_64__) || defined(__i386__)
          #ifdef __AVX2__
            buff_tx[i][j] = _mm256_slli_epi16(((__m256i *)buff[i])[j],4);
          #else
            buff_tx[i][j] = _mm_slli_epi16(((__m128i *)buff[i])[j],4);
          #endif
        #elif defined(__arm__)
          buff_tx[i][j] = vshlq_n_s16(((int16x8_t *)buff[i])[j],4);
        #endif
      }
    }


    s->tx_md.has_time_spec  = true;
    s->tx_md.start_of_burst = (s->tx_count==0) ? true : first_packet;
    s->tx_md.end_of_burst   = last_packet;
    s->tx_md.time_spec      = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_count++;

    // bit 3 enables gpio (for backward compatibility)
    if (flags_msb&8) {
      // push GPIO bits 7-9 from flags_msb
      int gpio789=(flags_msb&7)<<7;
      s->usrp->set_command_time(s->tx_md.time_spec);
      s->usrp->set_gpio_attr("FP0", "OUT", gpio789, 0x380);
      s->usrp->clear_command_time();
    }

    if (cc>1) {
      std::vector<void *> buff_ptrs;

      for (int i=0; i<cc; i++)
        buff_ptrs.push_back(&(((int16_t *)buff_tx[i])[0]));

      ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
    }
    else {
      ret = (int)s->tx_stream->send(&(((int16_t *)buff_tx[0])[0]), nsamps, s->tx_md);
    }

    if (ret != nsamps) LOG_E(HW,"[xmit] tx samples %d != %d\n",ret,nsamps);
    VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_USRP_SEND_RETURN, ret );
    VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE_THREAD, 0 );

  }

  return NULL;
}

int trx_usrp_write_init(openair0_device *device){

  //uhd::set_thread_priority_safe(1.0);
  openair0_thread_t *write_thread = &device->write_thread;
  printf("initializing tx write thread\n");

  write_thread->start              = 0;
  write_thread->end                = 0;
  write_thread->count_write        = 0;
  printf("end of tx write thread\n");
  pthread_mutex_init(&write_thread->mutex_write, NULL);
  pthread_cond_init(&write_thread->cond_write, NULL);
  pthread_create(&write_thread->pthread_write,NULL,trx_usrp_write_thread,(void *)device);

  return(0);
}

//---------------------end-------------------------

/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  int samples_received=0;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
  nsamps2 = (nsamps+7)>>3;
  __m256i buff_tmp[cc<2 ? 2 : cc][nsamps2];
#else
  nsamps2 = (nsamps+3)>>2;
  __m128i buff_tmp[cc<2 ? 2 : cc][nsamps2];
#endif
#elif defined(__arm__)
  nsamps2 = (nsamps+3)>>2;
  int16x8_t buff_tmp[cc<2 ? 2 : cc][nsamps2];
#endif

  int rxshift;
  switch (device->type) {
     case USRP_B200_DEV:
        rxshift=4;
        break;
     case USRP_X300_DEV:
     case USRP_N300_DEV:
        rxshift=2;
        break;
     default:
       AssertFatal(1==0,"Shouldn't be here\n");
  }

    samples_received=0;
    while (samples_received != nsamps) {

      if (cc>1) {
      // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;

        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]+samples_received);

        samples_received += s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
      // receive a single channel (e.g. from connector RF A)

        samples_received += s->rx_stream->recv((void*)((int32_t*)buff_tmp[0]+samples_received),
                                               nsamps-samples_received, s->rx_md);
      }
      if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
        break;

      if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) {
        printf("sleep...\n"); //usleep(100);
      }
    }
    if (samples_received == nsamps) s->wait_for_first_pps=0;

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
        // FK: in some cases the buffer might not be 32 byte aligned, so we cannot use avx2

        if ((((uintptr_t) buff[i])&0x1F)==0) {
          ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],rxshift);
        } else {
          ((__m128i *)buff[i])[2*j] = _mm_srai_epi16(((__m128i *)buff_tmp[i])[2*j],rxshift);
          ((__m128i *)buff[i])[2*j+1] = _mm_srai_epi16(((__m128i *)buff_tmp[i])[2*j+1],rxshift);
        }

#else
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],rxshift);
#endif
#elif defined(__arm__)
        ((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],rxshift);
#endif
      }
    }

    if (samples_received < nsamps) {
      LOG_E(HW,"[recv] received %d samples out of %d\n",samples_received,nsamps);
    }

  if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
    LOG_E(HW, "%s\n", s->rx_md.to_pp_string(true).c_str());

  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;

  // push GPIO bits 7-9 from flags_msb
   /*s->usrp->set_command_time(uhd::time_spec_t::from_ticks((s->rx_timestamp+(2*nsamps)),s->sample_rate));
   s->usrp->set_gpio_attr("FP0", "OUT", gpio789<<7, 0x380);
   s->usrp->clear_command_time();
   gpio789 = (gpio789+1)&7;*/
  recplay_state_t *recPlay=device->recplay_state;

  if ( recPlay != NULL) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (recPlay->nbSamplesBlocks < device->openair0_cfg->recplay_conf->u_sf_max &&
        recPlay->maxSizeBytes > (recPlay->currentPtr-(uint8_t *)recPlay->ms_sample) +
        sizeof(iqrec_t) + nsamps*4 ) {
      iqrec_t *hdr=(iqrec_t *)recPlay->currentPtr;
      hdr->header = BELL_LABS_IQ_HEADER;
      hdr->ts = *ptimestamp;
      hdr->nbBytes=nsamps*4;
      memcpy(hdr+1, buff[0], nsamps*4);
      recPlay->currentPtr+=sizeof(iqrec_t)+nsamps*4;
      recPlay->nbSamplesBlocks++;
      LOG_D(HW,"recorded %d samples, for TS %lu, shift in buffer %ld\n", nsamps, hdr->ts, recPlay->currentPtr-(uint8_t *)recPlay->ms_sample);
    } else
      exit_function(__FILE__, __FUNCTION__, __LINE__,"Recording reaches max iq limit\n");
  }

  return samples_received;
}

/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
static bool is_equal(double a, double b) {
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}

void *freq_thread(void *arg) {
  openair0_device *device=(openair0_device *)arg;
  usrp_state_t *s = (usrp_state_t *)device->priv;
  s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
  return NULL;
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success
 */
int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg, int dont_block) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  pthread_t f_thread;
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);

  // spawn a thread to handle the frequency change to not block the calling thread
  if (dont_block == 1)
    pthread_create(&f_thread,NULL,freq_thread,(void *)device);
  else {
    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
  }

  return(0);
}

/*! \brief Set RX frequencies
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success
 */
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);
  return(0);
}

/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success
 */
int trx_usrp_set_gains(openair0_device *device,
                       openair0_config_t *openair0_cfg) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
  s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);

  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    LOG_E(HW,"RX Gain 0 too high, reduce by %f dB\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
    exit(-1);
  }

  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
  LOG_I(HW,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
        openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
        openair0_cfg[0].rx_gain[0],gain_range.stop());
  return(0);
}

/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
int trx_usrp_stop(openair0_device *device) {
  return(0);
}

/*! \brief USRPB210 RX calibration table */
rx_gain_calib_table_t calib_table_b210[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
  {-1,0}
};

/*! \brief USRPB210 RX calibration table */
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
  {-1,0}
};

/*! \brief USRPx310 RX calibration table */
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
  {2660000000.0,81.0},
  {2300000000.0,81.0},
  {1880000000.0,82.0},
  {816000000.0,85.0},
  {-1,0}
};

/*! \brief USRPB210 RX calibration table */
rx_gain_calib_table_t calib_table_n310[] = {
  {3500000000.0,0.0},
  {2660000000.0,0.0},
  {2300000000.0,0.0},
  {1880000000.0,0.0},
  {816000000.0, 0.0},
  {-1,0}
};


/*! \brief Set RX gain offset
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success
 */
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
  double min_diff = 6e9,diff,gain_adj=0.0;

  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
      case 46080000:
        break;

      case 30720000:
        break;

      case 23040000:
        gain_adj=1.25;
        break;

      case 15360000:
        gain_adj=3.0;
        break;

      case 7680000:
        gain_adj=6.0;
        break;

      case 3840000:
        gain_adj=9.0;
        break;

      case 1920000:
        gain_adj=12.0;
        break;

      default:
        LOG_E(HW,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
        //exit(-1);
        break;
    }
  }

  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
    LOG_I(HW,"cal %d: freq %f, offset %f, diff %f\n",
          i,
          openair0_cfg->rx_gain_calib_table[i].freq,
          openair0_cfg->rx_gain_calib_table[i].offset,diff);

    if (min_diff > diff) {
      min_diff = diff;
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
    }

    i++;
  }
}

/*! \brief print the USRP statistics
* \param device the hardware to use
* \returns  0 on success
*/
int trx_usrp_get_stats(openair0_device *device) {
  return(0);
}

/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
int trx_usrp_reset_stats(openair0_device *device) {
  return(0);
}

extern "C" {
  int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
    LOG_I(HW, "openair0_cfg[0].sdr_addrs == '%s'\n", openair0_cfg[0].sdr_addrs);
    LOG_I(HW, "openair0_cfg[0].clock_source == '%d' (internal = %d, external = %d)\n", openair0_cfg[0].clock_source,internal,external);
    usrp_state_t *s ;

    if ( device->priv == NULL) {
      s=(usrp_state_t *)calloc(sizeof(usrp_state_t),1);
      device->priv=s;
      AssertFatal( s!=NULL,"USRP device: memory allocation failure\n");
    } else {
      LOG_E(HW, "multiple device init detected\n");
      return 0;
    }

    device->openair0_cfg = openair0_cfg;
    device->trx_start_func = trx_usrp_start;
    device->trx_get_stats_func = trx_usrp_get_stats;
    device->trx_reset_stats_func = trx_usrp_reset_stats;
    device->trx_end_func   = trx_usrp_end;
    device->trx_stop_func  = trx_usrp_stop;
    device->trx_set_freq_func = trx_usrp_set_freq;
    device->trx_set_gains_func   = trx_usrp_set_gains;
    device->trx_write_init = trx_usrp_write_init;


    // hotfix! to be checked later
    //uhd::set_thread_priority_safe(1.0);
    // Initialize USRP device
    int vers=0,subvers=0,subsubvers=0;
    int bw_gain_adjust=0;

    if (device->openair0_cfg->recplay_mode == RECPLAY_RECORDMODE) {
      std::cerr << "USRP device initialized in subframes record mode" << std::endl;
    }

    sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
    LOG_I(HW,"UHD version %s (%d.%d.%d)\n",
          uhd::get_version_string().c_str(),vers,subvers,subsubvers);
    std::string args;

    if (openair0_cfg[0].sdr_addrs == NULL) {
      args = "type=b200";
    } else {
      args = openair0_cfg[0].sdr_addrs;
      LOG_I(HW,"Checking for USRP with args %s\n",openair0_cfg[0].sdr_addrs);
    }

    uhd::device_addrs_t device_adds = uhd::device::find(args);

    if (device_adds.size() == 0) {
      LOG_E(HW,"No USRP Device Found.\n ");
      free(s);
      return -1;
    } else if (device_adds.size() > 1) {
      LOG_E(HW,"More than one USRP Device Found. Please specify device more precisely in config file.\n");
      free(s);
      return -1;
    }

    LOG_I(HW,"Found USRP %s\n", device_adds[0].get("type").c_str());
    double usrp_master_clock;

    if (device_adds[0].get("type") == "b200") {
      device->type = USRP_B200_DEV;
      usrp_master_clock = 30.72e6;
      args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=7680, recv_frame_size=7680" ;
    }

    if (device_adds[0].get("type") == "n3xx") {
      printf("Found USRP n300\n");
      device->type=USRP_N300_DEV;
      usrp_master_clock = 122.88e6;
      args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      //args += ", send_buff_size=33554432";
    }

    if (device_adds[0].get("type") == "x300") {
      printf("Found USRP x300\n");
      device->type=USRP_X300_DEV;
      usrp_master_clock = 184.32e6;
      args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);

      // USRP recommended: https://files.ettus.com/manual/page_usrp_x3x0_config.html
      if ( 0 != system("sysctl -w net.core.rmem_max=33554432 net.core.wmem_max=33554432") )
        LOG_W(HW,"Can't set kernel parameters for X3xx\n");
    }

    s->usrp = uhd::usrp::multi_usrp::make(args);

    if (args.find("clock_source")==std::string::npos) {
	if (openair0_cfg[0].clock_source == internal) {
	  s->usrp->set_clock_source("internal");
	  LOG_I(HW,"Setting clock source to internal\n");
	}
	else if (openair0_cfg[0].clock_source == external ) {
	  s->usrp->set_clock_source("external");
	  LOG_I(HW,"Setting clock source to external\n");
	}
	else if (openair0_cfg[0].clock_source==gpsdo) {
	  s->usrp->set_clock_source("gpsdo");
	  LOG_I(HW,"Setting clock source to gpsdo\n");
	}
	else {
	  LOG_W(HW,"Clock source set neither in usrp_args nor on command line, using default!\n");
	}
    }
    else {
	if (openair0_cfg[0].clock_source != unset) {
	  LOG_W(HW,"Clock source set in both usrp_args and in clock_source, ingnoring the latter!\n");
	}
  }

    if (args.find("time_source")==std::string::npos) {
	if (openair0_cfg[0].time_source == internal) {
	  s->usrp->set_time_source("internal");
	  LOG_I(HW,"Setting time source to internal\n");
	}
	else if (openair0_cfg[0].time_source == external ) {
	  s->usrp->set_time_source("external");
	  LOG_I(HW,"Setting time source to external\n");
	}
	else if (openair0_cfg[0].time_source==gpsdo) {
	  s->usrp->set_time_source("gpsdo");
	  LOG_I(HW,"Setting time source to gpsdo\n");
	}
	else {
	  LOG_W(HW,"Time source set neither in usrp_args nor on command line, using default!\n");
	}
    }
    else {
	if (openair0_cfg[0].clock_source != unset) {
	  LOG_W(HW,"Time source set in both usrp_args and in time_source, ingnoring the latter!\n");
	}
  }


  if (s->usrp->get_clock_source(0) == "gpsdo") {
    s->use_gps = 1;

    if (sync_to_gps(device)==EXIT_SUCCESS) {
      LOG_I(HW,"USRP synced with GPS!\n");
    } else {
      LOG_I(HW,"USRP fails to sync with GPS. Exiting.\n");
      exit(EXIT_FAILURE);
    }
  } else if (s->usrp->get_clock_source(0) == "external") {
    if (check_ref_locked(s,0)) {
      LOG_I(HW,"USRP locked to external reference!\n");
    } else {
      LOG_I(HW,"Failed to lock to external reference. Exiting.\n");
      exit(EXIT_FAILURE);
    }
  }

  if (device->type==USRP_X300_DEV) {
    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
    std::cerr << "-- Using calibration table: calib_table_x310" << std::endl;
  }

  if (device->type==USRP_N300_DEV) {
    openair0_cfg[0].rx_gain_calib_table = calib_table_n310;
    std::cerr << "-- Using calibration table: calib_table_n310" << std::endl;
  }


  if (device->type==USRP_N300_DEV || device->type==USRP_X300_DEV) {
    LOG_I(HW,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);

    switch ((int)openair0_cfg[0].sample_rate) {
      case 122880000:
        // from usrp_time_offset
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 15; //to be checked
        openair0_cfg[0].tx_bw                 = 80e6;
        openair0_cfg[0].rx_bw                 = 80e6;
        break;

      case 92160000:
        // from usrp_time_offset
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 15; //to be checked
        openair0_cfg[0].tx_bw                 = 80e6;
        openair0_cfg[0].rx_bw                 = 80e6;
        break;

      case 61440000:
        // from usrp_time_offset
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 15;
        openair0_cfg[0].tx_bw                 = 40e6;
        openair0_cfg[0].rx_bw                 = 40e6;
        break;

      case 46080000:
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 15;
        openair0_cfg[0].tx_bw                 = 40e6;
        openair0_cfg[0].rx_bw                 = 40e6;
        break;

      case 30720000:
        // from usrp_time_offset
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 15;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      case 15360000:
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 45;
        openair0_cfg[0].tx_bw                 = 10e6;
        openair0_cfg[0].rx_bw                 = 10e6;
        break;

      case 7680000:
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 50;
        openair0_cfg[0].tx_bw                 = 5e6;
        openair0_cfg[0].rx_bw                 = 5e6;
        break;

      case 1920000:
        //openair0_cfg[0].samples_per_packet    = 2048;
        openair0_cfg[0].tx_sample_advance     = 50;
        openair0_cfg[0].tx_bw                 = 1.25e6;
        openair0_cfg[0].rx_bw                 = 1.25e6;
        break;

      default:
        LOG_E(HW,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
        exit(-1);
        break;
    }
  }

  if (device->type == USRP_B200_DEV) {
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
      std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
    } else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
      std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
    }

    switch ((int)openair0_cfg[0].sample_rate) {
      case 46080000:
        s->usrp->set_master_clock_rate(46.08e6);
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 115;
        openair0_cfg[0].tx_bw                 = 40e6;
        openair0_cfg[0].rx_bw                 = 40e6;
        break;

      case 30720000:
        s->usrp->set_master_clock_rate(30.72e6);
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 115;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      case 23040000:
        s->usrp->set_master_clock_rate(23.04e6); //to be checked
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 113;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      case 15360000:
        s->usrp->set_master_clock_rate(30.72e06);
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 103;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      case 7680000:
        s->usrp->set_master_clock_rate(30.72e6);
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 80;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      case 1920000:
        s->usrp->set_master_clock_rate(30.72e6);
        //openair0_cfg[0].samples_per_packet    = 1024;
        openair0_cfg[0].tx_sample_advance     = 40;
        openair0_cfg[0].tx_bw                 = 20e6;
        openair0_cfg[0].rx_bw                 = 20e6;
        break;

      default:
        LOG_E(HW,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
        exit(-1);
        break;
    }
  }

  /* device specific */
  //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

  for(int i=0; i<((int) s->usrp->get_rx_num_channels()); i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      double gain=openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i];
      if ( gain > gain_range.stop())  {
                   LOG_E(HW,"RX Gain too high, lower by %f dB\n",
                   gain - gain_range.stop());
               gain=gain_range.stop();
      }

      s->usrp->set_rx_gain(gain,i);
      LOG_I(HW,"RX Gain %d %f (%f) => %f (max %f)\n",i,
            openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
            openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
    }
  }

  LOG_D(HW, "usrp->get_tx_num_channels() == %zd\n", s->usrp->get_tx_num_channels());
  LOG_D(HW, "openair0_cfg[0].tx_num_channels == %d\n", openair0_cfg[0].tx_num_channels);

  for(int i=0; i<((int) s->usrp->get_tx_num_channels()); i++) {
    ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);

    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
      LOG_I(HW,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
    }
  }

  //s->usrp->set_clock_source("external");
  //s->usrp->set_time_source("external");
  // display USRP settings
  LOG_I(HW,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
  LOG_I(HW,"Actual clock source %s...\n",s->usrp->get_clock_source(0).c_str());
  LOG_I(HW,"Actual time source %s...\n",s->usrp->get_time_source(0).c_str());
   sleep(1);
  // create tx & rx streamer
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
  int samples=openair0_cfg[0].sample_rate;
  int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
  samples/=10000;
  LOG_I(HW,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);

  if ( samples < max ) {
    stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
  }

  LOG_I(HW,"rx_max_num_samps %zu\n",
        s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

  for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++) {
    LOG_I(HW,"setting rx channel %d\n",i);
    stream_args_rx.channels.push_back(i);
  }

  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  uhd::stream_args_t stream_args_tx("sc16", "sc16");

  for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
    stream_args_tx.channels.push_back(i);

  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

  /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(int i=0; i<((int) s->usrp->get_tx_num_channels()) && i<openair0_cfg[0].tx_num_channels; i++)
    s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

  for(int i=0; i<((int) s->usrp->get_rx_num_channels()) && i<openair0_cfg[0].rx_num_channels; i++)
    s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

  for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
    LOG_I(HW,"RX Channel %d\n",i);
    LOG_I(HW,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
    LOG_I(HW,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
    LOG_I(HW,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
    LOG_I(HW,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
    LOG_I(HW,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
  }

  for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
    LOG_I(HW,"TX Channel %d\n",i);
    LOG_I(HW,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
    LOG_I(HW,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
    LOG_I(HW,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
    LOG_I(HW,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
    LOG_I(HW,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
    LOG_I(HW,"  Actual TX packet size: %lu\n",s->tx_stream->get_max_num_samps());
  }

  LOG_I(HW,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());
  device->trx_write_func = trx_usrp_write;
  device->trx_read_func  = trx_usrp_read;
  s->sample_rate = openair0_cfg[0].sample_rate;

  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;

  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;

  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;

  recplay_state_t *recPlay=device->recplay_state;

  if (recPlay != NULL) { // record mode
    recPlay->maxSizeBytes=openair0_cfg[0].recplay_conf->u_sf_max *
                            (sizeof(iqrec_t)+BELL_LABS_IQ_BYTES_PER_SF);
    recPlay->ms_sample = (iqrec_t *) malloc(recPlay->maxSizeBytes);
    recPlay->currentPtr= (uint8_t *)recPlay->ms_sample;

    if (recPlay->ms_sample == NULL) {
      std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
      exit(-1);
    }
  }
  return 0;
}
/*@}*/
}/* extern c */