build_helper 22 KB
Newer Older
1 2 3 4 5
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
6
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

22
# file build_helper
thomasl's avatar
thomasl committed
23
# brief
24
# authors Laurent Thomas, Lionel GAUTHIER
thomasl's avatar
thomasl committed
25 26
#
#######################################
27 28 29 30 31 32 33
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
34 35 36 37 38
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
39 40 41 42
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

43
SUDO='sudo -E'
thomasl's avatar
thomasl committed
44

45 46 47 48 49 50 51
###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
52
blue='\E[1;34m'
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

cecho()  {  
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

77 78 79
########################
# distribution helpers #
########################
80

81 82 83 84
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
85 86
#   ubuntu16.04
#   debian8.5
87
get_distribution_release() {
88 89
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
90 91 92 93
    else
        echo Unknown
    fi
}
94

95 96 97
check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
98
        "ubuntu18.04") return 0 ;;
99 100
        "ubuntu17.10") return 0 ;;
        "ubuntu17.04") return 0 ;;
101 102 103 104 105
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
        "centos7")     return 0 ;;
106 107 108
    esac
    return 1
}
109

110 111 112 113 114 115 116 117 118 119 120
##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT
121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
148
 set_openair_env
149
 dir=$OPENAIR_DIR/cmake_targets
150
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/* 
151 152 153
 rm -rf $dir/lte_build_oai $dir/lte-simulators/build
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build 
154 155 156 157 158 159
}

###################################
# Compilers
###################################

160 161 162 163 164 165 166 167 168 169 170 171 172 173
#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1"|wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

thomasl's avatar
thomasl committed
174
compilations() {
thomasl's avatar
thomasl committed
175
  cd $OPENAIR_DIR/cmake_targets/$1/build
176
  set +e
thomasl's avatar
thomasl committed
177 178
  {
    rm -f $3
179 180 181 182 183 184
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       make -j`nproc` $2
    fi

thomasl's avatar
thomasl committed
185
  } > $dlog/$2.$REL.txt 2>&1
186
  set -e
187
  echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
188
  if [ -s $3 ] ; then
189
     cp $3 $4
thomasl's avatar
thomasl committed
190
     echo_success "$2 compiled"
191
     check_warnings "$dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
192
  else
thomasl's avatar
thomasl committed
193
     echo_error "$2 compilation failed"
194
     exit 1
thomasl's avatar
thomasl committed
195 196 197
  fi
}

198 199 200 201
############################################
# External packages installers
############################################

202
install_protobuf_from_source(){
203 204 205
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
206 207
    cd /tmp
    echo "Downloading protobuf"
208 209 210 211 212 213
    #rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    #wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
    #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
    #cd protobuf-2.6.1/
    rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
    wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
214
    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
215
    cd protobuf-3.3.0/
216 217 218 219 220
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
221
    ) >& $protobuf_install_log
222 223 224
}

install_protobuf_c_from_source(){
225 226 227
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
228 229 230
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
        export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
    fi
231 232 233 234 235
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
236
	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
237 238 239 240 241 242
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
243
    ) >& $protobuf_c_install_log
244 245
}

246 247 248 249 250 251 252
install_usrp_uhd_driver_from_source(){
    uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
    echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
    (
    cd /tmp
    echo "Downloading UHD driver"
    rm -rf /tmp/uhd
Cedric Roux's avatar
Cedric Roux committed
253
    git clone https://github.com/EttusResearch/uhd.git
254 255 256 257 258 259
    cd uhd
    git checkout tags/release_003_010_001_001
    mkdir -p host/build
    cd host/build
    $CMAKE ../
    echo "Compiling UHD"
Cedric Roux's avatar
Cedric Roux committed
260
    make -j`nproc`
261 262 263 264 265 266
    make test
    $SUDO make install
    $SUDO ldconfig
    ) >& $uhd_install_log
}

thomasl's avatar
thomasl committed
267
check_install_usrp_uhd_driver(){
268
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
269
        #first we remove old installation
270
        $SUDO apt-get remove -y uhd || true
271
        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
thomasl's avatar
thomasl committed
272
        v=$(lsb_release -cs)
273 274 275
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
        #The new USRP repository
        $SUDO add-apt-repository ppa:ettusresearch/uhd -y
thomasl's avatar
thomasl committed
276
        $SUDO apt-get update
277 278
        $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
        $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
279
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
280
        $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
Cedric Roux's avatar
Cedric Roux committed
281
        $SUDO pip install requests
282 283 284
        if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
            # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
            $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
Cedric Roux's avatar
Cedric Roux committed
285
            install_usrp_uhd_driver_from_source
286 287 288
        else
            $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
        fi
289
    fi
290 291 292
}

install_usrp_uhd_driver() {
293
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
294 295 296
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
297 298 299 300 301 302
    fi
    if [ -z $1 ]; then
      $SUDO uhd_images_downloader
    else
      $SUDO uhd_images_downloader -i $1
    fi
thomasl's avatar
thomasl committed
303
}
304

305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331
install_bladerf_driver_from_source(){
    bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
    echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
    (
    cd /tmp
    echo "Downloading BladeRF driver"
    rm -rf /tmp/bladeRF
    git clone https://github.com/Nuand/bladeRF.git
    cd bladeRF
    git checkout tags/2016.06
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling BladeRF driver"
    make
    $SUDO make install
    $SUDO ldconfig
    echo "Downloading FPGA and firmware images"
    cd /tmp/bladeRF
    wget https://www.nuand.com/fx3/bladeRF_fw_latest.img
    wget https://www.nuand.com/fpga/hostedx40-latest.rbf
    sudo mkdir -p /usr/share/Nuand/bladeRF
    sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
    sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
    ) >& $bladerf_install_log
}

332
check_install_bladerf_driver(){
333 334 335 336 337 338 339 340
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
            $SUDO add-apt-repository -y ppa:bladerf/bladerf
            $SUDO apt-get update
        fi
        $SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
        $SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40	
341 342
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        install_bladerf_driver_from_source
343 344 345
   else
        echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
   fi
346 347 348 349
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
350
}
thomasl's avatar
thomasl committed
351

352 353 354 355 356 357 358 359 360 361 362 363 364 365 366
check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
                echo_fatal "Cannot compile lmssdr device" 
	fi


}

thomasl's avatar
thomasl committed
367
check_install_additional_tools (){
368 369
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
370
    PACKAGE_LIST="\
thomasl's avatar
thomasl committed
371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
387
	vlan	  \
388
	ctags \
389 390
        ntpdate \
        iperf3 \
Rohit Gupta's avatar
Rohit Gupta committed
391 392 393
        android-tools-adb \
	wvdial \
        python-numpy \
394 395 396 397 398
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
399
        python-matplotlib"
400
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
401
    PACKAGE_LIST="\
402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
425 426 427
      python-netifaces \
      scipy \
      python-matplotlib"
428
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
429
    PACKAGE_LIST=" \
430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
453 454 455 456 457 458
      python-netifaces \
      python2-scipy \
      python2-matplotlib"
  fi
    $SUDO $INSTALLER install -y $PACKAGE_LIST
    
459
    $SUDO rm -fr /opt/ssh
460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh

  #The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    $SUDO pip install paramiko
    $SUDO pip install pyroute2 colorama
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
    ) >& $log_netiface
476
  fi
thomasl's avatar
thomasl committed
477 478 479
}

check_install_oai_software() {
480
    local specific_packages=""
481 482 483 484
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
485 486
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
487 488
    local LAPACK_LIBNAME="liblapack.so"
    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
489
    $SUDO apt install -y software-properties-common
490
    case "$(get_distribution_release)" in
491
        "ubuntu14.04")
492
            specific_packages="libtasn1-3-dev gccxml libgnutls-dev libatlas-dev iproute libconfig8-dev"
493 494 495
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
496
            ;;
497
        "ubuntu16.04")
498
            specific_packages="libtasn1-6-dev gccxml libgnutls-dev libatlas-dev iproute libconfig8-dev"
499 500
            ;;
        "ubuntu17.04")
501
            specific_packages="libtasn1-6-dev castxml libgnutls28-dev libatlas-dev iproute libconfig8-dev"
502 503
            ;;
        "ubuntu17.10")
504 505 506 507 508 509
            specific_packages="libtasn1-6-dev castxml libgnutls28-dev iproute libconfig8-dev"
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
            ;;
        "ubuntu18.04")
            specific_packages="libtasn1-6-dev castxml libgnutls28-dev iproute2 libconfig-dev"
510 511
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
512
            ;;
513
    esac
514
    $SUDO apt-get install -y \
515
    $specific_packages \
516
	autoconf  \
thomasl's avatar
thomasl committed
517 518 519 520 521 522
	automake  \
	bison  \
	build-essential \
	cmake \
	cmake-curses-gui  \
	doxygen \
523 524
	doxygen-gui \
	texlive-latex-base \
thomasl's avatar
thomasl committed
525 526
	ethtool \
	flex  \
527 528
	gdb  \
	git \
thomasl's avatar
thomasl committed
529 530 531 532 533 534 535 536
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libblas-dev \
537
	libffi-dev \
thomasl's avatar
thomasl committed
538 539 540 541 542 543
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
544
	libidn11-dev \
thomasl's avatar
thomasl committed
545
	libmysqlclient-dev  \
546
	liboctave-dev \
thomasl's avatar
thomasl committed
547
	libpgm-dev \
548
	libpython2.7-dev \
thomasl's avatar
thomasl committed
549 550 551 552 553 554 555
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
556
	libxslt1-dev \
557 558 559
	mscgen  \
	octave \
	octave-signal \
thomasl's avatar
thomasl committed
560 561 562 563
	openssh-client \
	openssh-server \
	openssl \
	python  \
564
	subversion \
565 566 567
	xmlstarlet \
	python-pip \
	pydb \
568
	libyaml-dev \
569 570
	wget \
	libxpm-dev
Rohit Gupta's avatar
Rohit Gupta committed
571

572
    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
573

574
    $SUDO apt-get install -y nettle-dev nettle-bin
575 576 577 578 579 580 581 582 583 584 585 586 587 588 589
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
      $SUDO $INSTALLER install -y python-epdb
      $SUDO $INSTALLER install -y gccxml
    else
      $SUDO $INSTALLER install -y mscgen pydb
      # Fedora repos already contain gccxml's successor castxml.
      $SUDO $INSTALLER install -y castxml
    fi
590
    
591 592 593
    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
594
      bc \
595
      bison \
596
      $CMAKE \
597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      octave-devel \
      openpgm-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      octave \
      octave-signal \
      openssh-clients \
      openssh-server \
      openssl \
637 638
      patch \
      psmisc \
639 640 641 642 643 644
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
645
      kernel-devel \
646
      nettle-devel \
647 648 649 650 651
      gnutls-devel \
      libXpm-devel \
      lapack \
      lapack-devel \
      blas \
Cedric Roux's avatar
Cedric Roux committed
652 653
      blas-devel \
      libyaml-devel
654 655
  fi

thomasl's avatar
thomasl committed
656
    install_asn1c_from_source
657 658
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
thomasl's avatar
thomasl committed
659 660
}

thomasl's avatar
thomasl committed
661
install_asn1c_from_source(){
662 663
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
664
    (
665
    $SUDO rm -rf /tmp/asn1c
666
    GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
667
    cd /tmp/asn1c
thomasl's avatar
thomasl committed
668
    ./configure
669
    make -j`nproc`
670
    $SUDO make install
Rohit Gupta's avatar
Rohit Gupta committed
671
    cd -
672
    $SUDO ldconfig
673
    ) > $asn1_install_log 2>&1
thomasl's avatar
thomasl committed
674 675 676 677 678
}

#################################################
# 2. compile 
################################################
thomasl's avatar
thomasl committed
679

thomasl's avatar
thomasl committed
680
install_nas_tools() {
681
  if [ ! -f .ue.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
682
    echo_success "generate .ue_emm.nvram .ue.nvram"
683
    ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
684
  else
685
    [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
686
  fi
thomasl's avatar
thomasl committed
687

688
  if [ ! -f .usim.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
689
    echo_success "generate .usim.nvram"
690
    ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
691
  else
692
    [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
693
  fi
thomasl's avatar
thomasl committed
694 695

}
696

thomasl's avatar
thomasl committed
697 698 699 700 701 702 703 704 705

################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
thomasl's avatar
thomasl committed
706
    openair_path=${openair_path%/openair[123]/*}    
thomasl's avatar
thomasl committed
707 708 709 710 711 712 713
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

714 715 716 717 718 719 720 721
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
722 723
echo_info "** Calling sync now..."
sync 
724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
741 742 743 744 745
           do  
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
746 747 748 749 750 751 752 753 754
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
Rohit Gupta's avatar
Rohit Gupta committed
772
}