Merge branch 'RU-RAU-split' of https://gitlab.eurecom.fr/oai/openairinterface5g into RU-RAU-split

cmake_targets/autotests/v2/actions/3276.txt

+When running lsusb, if you have:
+
+    Bus 001 Device 002: ID 12d1:14fe Huawei Technologies Co., Ltd. Modem (Mass Storage Mode)
+
+You need to run:
+
+    usb_modeswitch -v 12d1 -p 14fe -M '55534243123456780000000000000011062000000100000000000000000000'
+
+After what, running lsusb should give:
+
+    Bus 001 Device 004: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard
+
+Values of 'Bus' and 'Device' may differ of course.

cmake_targets/autotests/v2/actions/bandrich.txt

@@ -13,6 +13,16 @@ containing lines:
     SUBSYSTEM=="tty", ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MODEL_ID}=="100d", ENV{ID_SERIAL_SHORT}=="357473040068155", ENV{ID_USB_INTERFACE_NUM}=="00", SYMLINK+="bandrich.data", MODE="0666"
     SUBSYSTEM=="tty", ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MODEL_ID}=="100d", ENV{ID_SERIAL_SHORT}=="357473040068155", ENV{ID_USB_INTERFACE_NUM}=="02", SYMLINK+="bandrich.control", MODE="0666"
 
+To avoid NetworkManager to play with the bandrich, add also the line:
+
+    ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+Maybe also add; , ENV{ID_MM_DEVICE_IGNORE}="1"
+to the two other lines.
+
+Then run: udevadm control --reload-rules
+And:      service network-manager restart
+
 Change vendor_id/model_id/serial/interface num to match yours.
 Use lsusb -v to find values.
 

common/utils/T/tracer/enb.c

@@ -94,6 +94,7 @@ typedef struct {
   enb_gui *e;
   int ue;                /* what UE is displayed in the UE specific views */
   void *database;
+  int nb_rb;
 } enb_data;
 
 void is_on_changed(void *_d)
@@ -121,27 +122,6 @@ connection_dies:
   if (pthread_mutex_unlock(&d->lock)) abort();
 }
 
-void usage(void)
-{
-  printf(
-"options:\n"
-"    -d <database file>        this option is mandatory\n"
-"    -on <GROUP or ID>         turn log ON for given GROUP or ID\n"
-"    -off <GROUP or ID>        turn log OFF for given GROUP or ID\n"
-"    -ON                       turn all logs ON\n"
-"    -OFF                      turn all logs OFF\n"
-"                              note: you may pass several -on/-off/-ON/-OFF,\n"
-"                                    they will be processed in order\n"
-"                                    by default, all is off\n"
-"    -ip <host>                connect to given IP address (default %s)\n"
-"    -p <port>                 connect to given port (default %d)\n"
-"    -debug-gui                activate GUI debug logs\n",
-  DEFAULT_REMOTE_IP,
-  DEFAULT_REMOTE_PORT
-  );
-  exit(1);
-}
-
 static void *gui_thread(void *_g)
 {
   gui *g = _g;
@@ -314,14 +294,14 @@ static void enb_main_gui(enb_gui *e, gui *g, event_handler *h, void *database,
 
   input_signal_plot = new_xy_plot(g, 256, 55, "input signal", 20);
   widget_add_child(g, line, input_signal_plot, -1);
-  xy_plot_set_range(g, input_signal_plot, 0, 7680*10, 20, 70);
+  xy_plot_set_range(g, input_signal_plot, 0, 7680*10 * ed->nb_rb/25, 20, 70);
   input_signal_log = new_framelog(h, database,
       "ENB_PHY_INPUT_SIGNAL", "subframe", "rxdata");
   /* a skip value of 10 means to process 1 frame over 10, that is
    * more or less 10 frames per second
    */
   framelog_set_skip(input_signal_log, 10);
-  input_signal_view = new_view_xy(7680*10, 10,
+  input_signal_view = new_view_xy(7680*10 * ed->nb_rb/25, 10,
       g, input_signal_plot, new_color(g, "#0c0c72"), XY_LOOP_MODE);
   logger_add_view(input_signal_log, input_signal_view);
 
@@ -661,6 +641,28 @@ void view_add_log(view *v, char *log, event_handler *h, void *database,
   on_off(database, log, is_on, 1);
 }
 
+void usage(void)
+{
+  printf(
+"options:\n"
+"    -d   <database file>      this option is mandatory\n"
+"    -rb  <RBs>                setup for this number of RBs (default 25)\n"
+"    -on  <GROUP or ID>        turn log ON for given GROUP or ID\n"
+"    -off <GROUP or ID>        turn log OFF for given GROUP or ID\n"
+"    -ON                       turn all logs ON\n"
+"    -OFF                      turn all logs OFF\n"
+"                              note: you may pass several -on/-off/-ON/-OFF,\n"
+"                                    they will be processed in order\n"
+"                                    by default, all is off\n"
+"    -ip <host>                connect to given IP address (default %s)\n"
+"    -p  <port>                connect to given port (default %d)\n"
+"    -debug-gui                activate GUI debug logs\n",
+  DEFAULT_REMOTE_IP,
+  DEFAULT_REMOTE_PORT
+  );
+  exit(1);
+}
+
 int main(int n, char **v)
 {
   extern int volatile gui_logd;
@@ -681,6 +683,8 @@ int main(int n, char **v)
 
   reset_ue_ids();
 
+  enb_data.nb_rb = 25;
+
   /* write on a socket fails if the other end is closed and we get SIGPIPE */
   if (signal(SIGPIPE, SIG_IGN) == SIG_ERR) abort();
 
@@ -691,6 +695,8 @@ int main(int n, char **v)
     if (!strcmp(v[i], "-h") || !strcmp(v[i], "--help")) usage();
     if (!strcmp(v[i], "-d"))
       { if (i > n-2) usage(); database_filename = v[++i]; continue; }
+    if (!strcmp(v[i], "-rb"))
+      { if (i > n-2) usage(); enb_data.nb_rb = atoi(v[++i]); continue; }
     if (!strcmp(v[i], "-ip")) { if (i > n-2) usage(); ip = v[++i]; continue; }
     if (!strcmp(v[i], "-p"))
       { if (i > n-2) usage(); port = atoi(v[++i]); continue; }
@@ -706,6 +712,11 @@ int main(int n, char **v)
     usage();
   }
 
+  switch (enb_data.nb_rb) {
+  case 25: case 50: case 100: break;
+  default: printf("ERROR, bad value for -rb (%d)\n", enb_data.nb_rb); exit(1);
+  }
+
   if (database_filename == NULL) {
     printf("ERROR: provide a database file (-d)\n");
     exit(1);

openair1/PHY/LTE_TRANSPORT/dci.c

@@ -2257,11 +2257,18 @@ uint8_t generate_dci_top(uint8_t num_pdcch_symbols,
   y[0] = &yseq0[0];
   y[1] = &yseq1[0];
 
+#if 0
   // reset all bits to <NIL>, here we set <NIL> elements as 2
   // memset(e, 2, DCI_BITS_MAX);
   // here we interpret NIL as a random QPSK sequence. That makes power estimation easier.
   for (i=0; i<DCI_BITS_MAX; i++)
     e[i]=taus()&1;
+#endif
+
+  /* clear all bits, the above code may generate too much false detections
+   * (not sure about this, to be checked somehow)
+   */
+  memset(e, 0, DCI_BITS_MAX);
 
   e_ptr = e;
 

openair2/PHY_INTERFACE/IF_Module.c

@@ -366,6 +366,14 @@ static void dump_dl(Sched_Rsp_t *d)
   A("XXXX up          tpc_bitmap           %d\n", q->tpc_bitmap);
   A("XXXX up          transmission_power   %d\n", q->transmission_power);
           }
+          if (p->pdu_type == NFAPI_HI_DCI0_HI_PDU_TYPE) {
+            nfapi_hi_dci0_hi_pdu_rel8_t *q = &p->hi_pdu.hi_pdu_rel8;
+  A("XXXX up          rb start    %d\n", q->resource_block_start);
+  A("XXXX up          cs2_drms    %d\n", q->cyclic_shift_2_for_drms);
+  A("XXXX up          ack         %d\n", q->hi_value);
+  A("XXXX up          i_phich     %d\n", q->i_phich);
+  A("XXXX up          power       %d\n", q->transmission_power);
+          }
         }
       }
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf

@@ -50,7 +50,7 @@ eNBs =
       prach_zero_correlation  			      = 1;
       prach_freq_offset       			      = 2;
       pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 1;
+      pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
       pucch_n1_AN             			      = 32;
       pdsch_referenceSignalPower 			      = -27;

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi.conf

@@ -50,7 +50,7 @@ eNBs =
       prach_zero_correlation  			      = 1;
       prach_freq_offset       			      = 2;
       pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 1;
+      pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
       pucch_n1_AN             			      = 32;
       pdsch_referenceSignalPower 			      = -27;

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.conf

@@ -53,7 +53,7 @@ eNBs =
       prach_zero_correlation  			      = 1;
       prach_freq_offset       			      = 2;
       pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 1;
+      pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
       pucch_n1_AN             			      = 32;
       pdsch_referenceSignalPower 			      = -27;

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.lo.conf

@@ -53,7 +53,7 @@ eNBs =
       prach_zero_correlation  			      = 1;
       prach_freq_offset       			      = 2;
       pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 1;
+      pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
       pucch_n1_AN             			      = 32;
       pdsch_referenceSignalPower 			      = -27;