An error occurred fetching the project authors.
- 24 May, 2018 2 commits
-
-
Haruki NAOI authored
-
Haruki NAOI authored
This reverts commit 24c669f3.
-
- 21 May, 2018 1 commit
-
-
jftt_wangshanshan authored
-
- 15 May, 2018 2 commits
- 09 May, 2018 1 commit
-
-
jftt_wangshanshan authored
Fix cqi_req_flag, to prevent continously schedule cqi after set it to 1 and before actually receive it at the right subframe.
-
- 23 Apr, 2018 2 commits
-
-
jftt_wangshanshan authored
-
jftt_wangshanshan authored
-
- 16 Apr, 2018 1 commit
-
-
Haruki NAOI authored
-
- 10 Apr, 2018 1 commit
-
-
wujing authored
-
- 16 Mar, 2018 1 commit
-
-
Haruki NAOI authored
-
- 01 Mar, 2018 1 commit
-
-
Wang.shanshan authored
-
- 11 Feb, 2018 1 commit
-
-
jftt_wangshanshan authored
-
- 08 Feb, 2018 1 commit
-
-
jftt_wangshanshan authored
Fix bug in subframe2harq_pid. Remove if tdd condition while calling this method since there is already if-else in the method.
-
- 05 Feb, 2018 2 commits
-
-
jftt_wangshanshan authored
-
jftt_wangshanshan authored
-
- 22 Jan, 2018 2 commits
- 15 Jan, 2018 3 commits
-
-
bruno mongazon authored
Fix #582, RTAI, RTAI_ENABLED, ENABLE_RTAI_CLOCK, RTAI_ISNT_POSIX, _RTAI_MATH_H, CELLULAR, TIMER_ONESHOT_MODE, EMOS, EMOS_CHANNEL, OAI_EMU, OPENAIR_EMU, PHY_ABSTRACTION, PHY_ABSTRACTION_UL removed
-
Cedric Roux authored
This commit fixes issues introduced by the previous commit. Summary of work: - cleanup: - fix LOG_XX to be less verbose - fix cmake_targets/CMakeLists.txt - fix oaienv - remove dead code - bug fixes: - in openair1/SCHED/fapi_l1.c we had: eNB->pdcch_vars[subframe&1].num_dci = number_dci; should be: eNB->pdcch_vars[subframe&1].num_dci = 0; This bug let the PHY send more DCIs than what should have been sent because num_dci is incremented later on in the code. This fix may be a problem for fapi mode, to be checked. - add new T VCD traces - revert openair1/PHY/TOOLS/file_output.c to 'develop' version - remove thread_id in logRecord/logRecord_mt - revert (and adapt) configuration files - be careful when doing frame++, we need to % 1024 - revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c - NFAPI: - the open-nFAPI code has been included in the repository. See nfapi/README. Maybe we should "git clone" the Cisco repository instead. We have to be careful of availability though. What has been tested: - monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink Anything else may fail to work, especially the FAPI mode, which has not been tested at all.
-
Cedric Roux authored
It has been chosen to not include the full history of commits from David. He included a binary version of wireshark, probably a modified one that understands NFAPI. Wireshark is released under the GPL license, we cannot include it in the repository. We could have done a next commit to remove this binary. But then it would still be present in the history of commits, which may not be allowed. And it would take space on disk. We could edit the history to remove wireshark entirely. But this operation is too complicated. There was also a pcap capture file, which has nothing to do in the history of commits and would take space on disk. There again, it's too difficult to edit the history to remove it. There was a file .gitignore that was also removed. The original history can be found on David's repository: https://gitlab.eurecom.fr/daveprice/openairinterface5g/ The branch is: nfapi-ru-rau-split. A copy of that branch has been included in the internal OAI repository, for those who have access to it. The branch is the same. The last commit ID is 9106438239e0bc626ff1fa1d97d911caadd0fbb9. You can compare the current commit with the commit 9106... to see what differs. The current commit has to be considered non-working. The commit following the current commit will fix problems with the work in the current commit. If you use git bisect, don't spend time analyzing the current commit.
-
- 13 Jan, 2018 2 commits
- 08 Jan, 2018 1 commit
-
-
Xu Bo authored
-
- 07 Dec, 2017 2 commits
- 25 Oct, 2017 1 commit
-
-
Cedric Roux authored
- remove global variables in the function lte_est_timing_advance_pusch - do the smoothing logic that was in lte_est_timing_advance_pusch in rx_sdu (is it necessary? is it correct?) - put back the value 100 in prach_procedures for the test on prach energy - change the value of timing_advance_update it was: timing_advance_update = sync_pos - eNB->frame_parms.nb_prefix_samples/4; //to check it is now: timing_advance_update = sync_pos; // - eNB->frame_parms.nb_prefix_samples/4; //to check this should be checked somehow. The computation looked suspicious. Maybe the new one is wrong.
-
- 23 Oct, 2017 2 commits
-
-
Cedric Roux authored
-
Cedric Roux authored
just a quick fix before merge, the real solution is to disable pusch scheduling in the prach, to be done later
-
- 22 Oct, 2017 1 commit
-
-
Raymond Knopp authored
-
- 19 Oct, 2017 2 commits
-
-
Cedric Roux authored
phy_init_lte_ue_signal was renamed init_lte_ue_signal in openair1/PHY/INIT/defs.h maybe it's the opposite that should have been done? Functions used in one file and defined in another may have been declared in the wrong header file.
-
Raymond Knopp authored
modifications for TDD and IF4p5 (in particular TDD). Both in RRU and RAU components. Monolithic is unchanged.
-
- 15 Oct, 2017 1 commit
-
-
Raymond Knopp authored
-
- 14 Oct, 2017 2 commits
-
-
Raymond Knopp authored
put pucch metric into uci->stat before calling harq_indication. Fixes an issue with PUCCH1 SNR measurements coming from HARQ.
-
Raymond Knopp authored
added deactivation of ULSCH harq process after 3rd retransmission. Avoids problem of accumulating failed RA processes.
-
- 12 Oct, 2017 2 commits
-
-
Cedric Roux authored
- better ulsch harq management in phy (maybe not over) - don't do schedule_CSI if UE not in RRC_CONNECTED (not sure if correct) - don't call find_ulsch in fill_dci0 - some spaces cleaned - log improved
-
Cedric Roux authored
-
- 10 Oct, 2017 1 commit
-
-
Cedric Roux authored
- re-use ta_timer - when ta_timer is running: - no TA sent to UE - no TA from UE (for UE to have time to apply previous TA command) - decrease ta_timer every TTI - be careful to use correct value of ta_update (31 means no TA) Maybe not correct, to be checked.
-
- 08 Oct, 2017 2 commits
-
-
Raymond Knopp authored
handling of PDCCH order. stoping UE-specific scheduler during RA procedure. checking for DCI format (resource allocation) to not overwrite resource_block_coding for format 1A DCIs.
-
Raymond Knopp authored
put 50 PRB back in default enb configuration. added handling of UE release in L1/L2. detection of stale ULSCH configuration
-