add arm config file

etc/amf-arm-83.conf

+################################################################################
+# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The OpenAirInterface Software Alliance licenses this file to You under
+# the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.openairinterface.org/?page_id=698
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
+# For more information about the OpenAirInterface (OAI) Software Alliance:
+#      contact@openairinterface.org
+################################################################################
+
+AMF = 
+{
+  INSTANCE_ID = 10;            # 0 is the default
+  PID_DIRECTORY = "/var/run";   # /var/run is the default
+  
+  AMF_NAME = "OAI-AMF";
+  
+  RELATIVE_CAPACITY = 50;
+  # Display statistics about whole system (in seconds)
+  STATISTICS_TIMER_INTERVAL = 20;  # YOUR CONFIG HERE
+  
+  CORE_CONFIGURATION:
+  {
+    EMERGENCY_SUPPORT = "false";
+  };
+  
+  GUAMI: 
+  {
+    MCC = "460"; MNC = "11"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
+  }
+  
+  SERVED_GUAMI_LIST = (
+    {MCC = "460"; MNC = "11"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
+  );
+    
+  PLMN_SUPPORT_LIST = (
+  {
+    MCC = "460"; MNC = "11"; TAC = 100;  # YOUR PLMN CONFIG HERE
+    SLICE_SUPPORT_LIST = (
+      {SST = "1"; SD = "none"}  # YOUR NSSAI CONFIG HERE
+     )
+  }
+  );
+    
+  INTERFACES:
+  {
+    # AMF binded interface for N1/N2 interface (NGAP) 
+    NGAP_AMF: 
+    {
+      INTERFACE_NAME = "eth0";  # YOUR NETWORK CONFIG HERE
+      IPV4_ADDRESS   = "read";
+      PORT           = 38412;                            # YOUR NETWORK CONFIG HERE
+      PPID           = 60;                               # YOUR NETWORK CONFIG HERE
+    };
+    # AMF binded interface for Nausf interface
+    NAUSF: 
+    {
+     INTERFACE_NAME = "eth0";  # YOUR NETWORK CONFIG HERE
+      IPV4_ADDRESS   = "192.168.199.181/24";
+      PORT           = 8383;                            # YOUR NETWORK CONFIG HERE
+    };
+    
+    # AMF binded interface for N11 
+    N11:
+    {
+      INTERFACE_NAME = "lo";                          # YOUR NETWORK CONFIG HERE
+      IPV4_ADDRESS   = "127.0.0.1/24";
+      PORT           = 8282;                               # YOUR NETWORK CONFIG HERE
+
+      SMF_INSTANCES_POOL = (
+        {SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "127.0.0.2"; PORT = "8889"; VERSION = "v1"; SELECTED = "true"},   # YOUR SMF CONFIG HERE
+        {SMF_INSTANCE_ID = 2; IPV4_ADDRESS = "10.103.238.21"; PORT = "8181"; VERSION = "v1"; SELECTED = "false"} # YOUR SMF CONFIG HERE
+      );
+    };
+  };
+  
+
+  AUTHENTICATION:
+  {
+    ## MySQL mandatory options
+    MYSQL_server = "127.0.0.1"; # MySQL Server address
+    MYSQL_user   = "openxg";   # Database server login
+    MYSQL_pass   = "123456";   # Database server password
+    MYSQL_db     = "OPENXG_DB";     # Your database name
+    
+    ## OP
+    OPERATOR_key = "1006020f0a478bf6b699f15c062e42b3"; # OP key matching your database
+    RANDOM = "true";
+  };
+  
+  NAS:
+  {
+	ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA1" , "NIA0" , "NIA2" ];
+	ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
+  };
+  
+};
+
+
+MODULES =
+{
+  NGAP_MESSAGE = (
+    {MSG_NAME = "NGSetupRequest"; ProcedureCode = 21; TypeOfMessage = "initialMessage"}
+  );
+};

src/amf-app/amf_app.cpp

@@ -69,6 +69,7 @@ amf_app::amf_app(const amf_config& amf_cfg) {
 
   try {
     amf_n1_inst = new amf_n1();
+    printf("----------Got N2 Address is %s\n",std::string(inet_ntoa(amf_cfg.n2.addr4)).c_str());
     amf_n2_inst =
         new amf_n2(std::string(inet_ntoa(amf_cfg.n2.addr4)), amf_cfg.n2.port);
     amf_n11_inst = new amf_n11();