usrp_lib.cpp 25.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
Raymond Knopp's avatar
 
Raymond Knopp committed
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
Raymond Knopp's avatar
 
Raymond Knopp committed
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48

Raymond Knopp's avatar
 
Raymond Knopp committed
49
#include "common_lib.h"
50 51 52 53 54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58 59 60 61 62
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
Raymond Knopp's avatar
 
Raymond Knopp committed
63 64 65 66 67 68
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
69
  //! USRP device pointer
Raymond Knopp's avatar
 
Raymond Knopp committed
70 71
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
72
  
Raymond Knopp's avatar
 
Raymond Knopp committed
73
  //create a send streamer and a receive streamer
74
  //! USRP TX Stream
Raymond Knopp's avatar
 
Raymond Knopp committed
75
  uhd::tx_streamer::sptr tx_stream;
76
  //! USRP RX Stream
Raymond Knopp's avatar
 
Raymond Knopp committed
77 78
  uhd::rx_streamer::sptr rx_stream;

79
  //! USRP TX Metadata
Raymond Knopp's avatar
 
Raymond Knopp committed
80
  uhd::tx_metadata_t tx_md;
81
  //! USRP RX Metadata
Raymond Knopp's avatar
 
Raymond Knopp committed
82 83
  uhd::rx_metadata_t rx_md;

84
  //! USRP Timestamp Information
Raymond Knopp's avatar
 
Raymond Knopp committed
85
  uhd::time_spec_t tm_spec;
86

Raymond Knopp's avatar
 
Raymond Knopp committed
87
  //setup variables and allocate buffer
88
  //! USRP Metadata
Raymond Knopp's avatar
 
Raymond Knopp committed
89 90
  uhd::async_metadata_t async_md;

91
  //! Sampling rate
Raymond Knopp's avatar
 
Raymond Knopp committed
92
  double sample_rate;
93 94

  //! time offset between transmiter timestamp and receiver timestamp;
Raymond Knopp's avatar
 
Raymond Knopp committed
95
  double tdiff;
96 97

  //! TX forward samples. We use usrp_time_offset to get this value
Raymond Knopp's avatar
 
Raymond Knopp committed
98 99 100 101 102 103
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
104
  //! Number of underflows
Raymond Knopp's avatar
 
Raymond Knopp committed
105
  int num_underflows;
106
  //! Number of overflows
Raymond Knopp's avatar
 
Raymond Knopp committed
107
  int num_overflows;
108 109
  
  //! Number of sequential errors
Raymond Knopp's avatar
 
Raymond Knopp committed
110
  int num_seq_errors;
111
  //! tx count
Raymond Knopp's avatar
 
Raymond Knopp committed
112
  int64_t tx_count;
113
  //! rx count
Raymond Knopp's avatar
 
Raymond Knopp committed
114
  int64_t rx_count;
115
  //! timestamp of RX packet
Raymond Knopp's avatar
 
Raymond Knopp committed
116 117 118 119
  openair0_timestamp rx_timestamp;

} usrp_state_t;

120 121 122
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
Raymond Knopp's avatar
 
Raymond Knopp committed
123 124 125 126 127 128
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Raymond Knopp's avatar
 
Raymond Knopp committed
129
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
Raymond Knopp's avatar
 
Raymond Knopp committed
130 131 132
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

Raymond Knopp's avatar
 
Raymond Knopp committed
133
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
Raymond Knopp's avatar
 
Raymond Knopp committed
134 135 136 137 138 139 140 141
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
142 143

  return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
144
}
145 146 147
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
Raymond Knopp's avatar
 
Raymond Knopp committed
148 149 150 151 152 153
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
154 155 156 157 158
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
Raymond Knopp's avatar
 
Raymond Knopp committed
159
}
160

161 162 163 164 165 166 167 168
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
169
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
Raymond Knopp's avatar
 
Raymond Knopp committed
170 171 172 173 174 175 176
{
  usrp_state_t *s = (usrp_state_t*)device->priv;
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
Raymond Knopp's avatar
Raymond Knopp committed
177 178 179 180 181 182 183 184

  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
    s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
  }
  else
    s->tx_stream->send(buff[0], nsamps, s->tx_md);
Raymond Knopp's avatar
 
Raymond Knopp committed
185
  s->tx_md.start_of_burst = false;
186 187

  return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
188 189
}

190 191 192 193 194 195 196 197 198 199 200
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
Raymond Knopp's avatar
 
Raymond Knopp committed
201
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
Raymond Knopp's avatar
 
Raymond Knopp committed
202
{
203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   __m256i buff_tmp[2][nsamps>>3];
   nsamps2 = (nsamps+7)>>3;
#else
   __m128i buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif
#elif defined(__arm__)
   int16x8_t buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif

Raymond Knopp's avatar
 
Raymond Knopp committed
219

220
  if (device->type == USRP_B200_DEV) {  
221
    if (cc>1) {
222
    // receive multiple channels (e.g. RF A and RF B)
223
      std::vector<void *> buff_ptrs;
224
 
225 226 227
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
228
    // receive a single channel (e.g. from connector RF A)
229 230 231
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
   
232
  // bring RX data into 12 LSBs for softmodem RX
233 234
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
235 236
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
237
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
238
#else
239
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
240 241
#endif
#elif defined(__arm__)
242
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
243
#endif
244
      }
245
    }
246
  } else if (device->type == USRP_X300_DEV) {
247 248 249 250 251 252 253 254 255
    if (cc>1) {
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
256
    }
257
  }
258

Raymond Knopp's avatar
 
Raymond Knopp committed
259 260 261 262
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
263

Raymond Knopp's avatar
 
Raymond Knopp committed
264 265 266 267 268 269 270 271 272 273 274 275 276 277 278
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
279 280 281
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
282

Raymond Knopp's avatar
 
Raymond Knopp committed
283 284 285
  return samples_received;
}

286 287 288
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
Raymond Knopp's avatar
 
Raymond Knopp committed
289 290 291 292 293 294 295 296
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

297 298 299 300
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
Raymond Knopp's avatar
 
Raymond Knopp committed
301 302 303 304
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
Raymond Knopp's avatar
 
Raymond Knopp committed
305

306 307 308 309 310 311
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
312
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
Raymond Knopp's avatar
 
Raymond Knopp committed
313 314 315 316 317 318 319 320 321 322

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

323 324 325 326 327
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
Raymond Knopp's avatar
 
Raymond Knopp committed
328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

345 346 347 348 349
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
350
int trx_usrp_set_gains(openair0_device* device, 
351
		       openair0_config_t *openair0_cfg) {
Raymond Knopp's avatar
 
Raymond Knopp committed
352 353 354 355

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
356 357 358 359 360 361 362 363 364
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
365
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
366

Raymond Knopp's avatar
 
Raymond Knopp committed
367 368
  return(0);
}
369

370 371 372
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
373
int trx_usrp_stop(int card) {
374 375
  return(0);
}
376

377
/*! \brief USRPB210 RX calibration table */
378
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
379 380 381 382 383
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
384 385
  {-1,0}};

386
/*! \brief USRPB210 RX calibration table */
387 388 389 390 391 392
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
393 394
  {-1,0}};

395
/*! \brief USRPx310 RX calibration table */
396 397
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
398
  {2660000000.0,81.0},
399 400
  {2300000000.0,81.0},
  {1880000000.0,82.0},
401
  {816000000.0,85.0},
402 403
  {-1,0}};

404 405 406 407 408
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
409
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
410 411 412

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
439 440
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
441
    printf("cal %d: freq %f, offset %f, diff %f\n",
442 443 444
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
445 446
    if (min_diff > diff) {
      min_diff = diff;
447
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
448 449 450 451 452 453
    }
    i++;
  }
  
}

454 455 456 457
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
458
int trx_usrp_get_stats(openair0_device* device) {
459

460 461 462
  return(0);

}
463 464 465 466 467

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
468
int trx_usrp_reset_stats(openair0_device* device) {
469 470 471 472

  return(0);

}
473

474

475

476
extern "C" {
477 478 479 480
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
481
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
482
    
483 484 485 486 487
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
Raymond Knopp's avatar
 
Raymond Knopp committed
488

Raymond Knopp's avatar
 
Raymond Knopp committed
489

Raymond Knopp's avatar
 
Raymond Knopp committed
490
  std::string args = "type=b200";
Raymond Knopp's avatar
Raymond Knopp committed
491 492


Raymond Knopp's avatar
 
Raymond Knopp committed
493
  uhd::device_addrs_t device_adds = uhd::device::find(args);
Raymond Knopp's avatar
 
Raymond Knopp committed
494
  size_t i;
495 496 497 498 499
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
Raymond Knopp's avatar
 
Raymond Knopp committed
500

501
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
502
  
Raymond Knopp's avatar
 
Raymond Knopp committed
503 504
  if(device_adds.size() == 0)
  {
505 506 507 508 509 510 511 512
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
    uhd::device_addrs_t device_adds = uhd::device::find(args);
Raymond Knopp's avatar
 
Raymond Knopp committed
513

514 515 516 517 518
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
Raymond Knopp's avatar
Raymond Knopp committed
519

520
    }
Raymond Knopp's avatar
Raymond Knopp committed
521

522

523 524 525 526 527 528 529 530
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
531
    //Setting device type to USRP X300/X310 
532
    device->type=USRP_X300_DEV;
533

534 535 536
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
537 538

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
539
    
540 541
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
542 543 544
            // from usrp_time_offset
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 15;
545 546
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
547
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
548
      break;
549
    case 15360000:
550 551
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 45;
552 553
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
554
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
555
      break;
556
    case 7680000:
557 558
      openair0_cfg[0].samples_per_packet    = 1024;
      openair0_cfg[0].tx_sample_advance     = 50;
559 560
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
561
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
562
      break;
563
    case 1920000:
564 565
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 50;
566 567
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
568
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
569 570 571 572 573 574 575
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

576 577
  } else {
    printf("Found USRP B200");
578
    args += ",num_recv_frames=256" ; 
579 580 581 582
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
583 584 585 586
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
587
    // set master clock rate and sample rate for tx & rx for streaming
588

589
    device->type = USRP_B200_DEV;
590

Raymond Knopp's avatar
Raymond Knopp committed
591

592 593 594 595 596 597 598 599
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
600 601
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
602
      s->usrp->set_master_clock_rate(30.72e6);
603
            // from usrp_time_offset
Raymond Knopp's avatar
Raymond Knopp committed
604
      openair0_cfg[0].samples_per_packet    = 4096;
605
      openair0_cfg[0].tx_sample_advance     = 115;
606 607
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
608
      openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
609
      break;
610 611 612 613
    case 23040000:
      s->usrp->set_master_clock_rate(46.08e6);
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 113;
614 615
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
616 617
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
      break;
618
    case 15360000:
619
      s->usrp->set_master_clock_rate(30.72e6);
620
      openair0_cfg[0].samples_per_packet    = 2048;
621
      openair0_cfg[0].tx_sample_advance     = 113;
622 623
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
624
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
625
      break;
626
    case 7680000:
627
      s->usrp->set_master_clock_rate(30.72e6);
628
      openair0_cfg[0].samples_per_packet    = 1024;
629
      openair0_cfg[0].tx_sample_advance     = 70;//103;
630 631
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
632
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
633
      break;
634
    case 1920000:
635
      s->usrp->set_master_clock_rate(30.72e6);
636 637
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 40;
638 639
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
640
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
641 642 643 644 645 646 647
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
Raymond Knopp's avatar
Raymond Knopp committed
648

649
  /* device specific */
650 651 652 653
  openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
654
  
Raymond Knopp's avatar
 
Raymond Knopp committed
655
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
Raymond Knopp's avatar
 
Raymond Knopp committed
656
    if (i<openair0_cfg[0].rx_num_channels) {
Raymond Knopp's avatar
Raymond Knopp committed
657
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
kortke's avatar
kortke committed
658
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
659
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
Raymond Knopp's avatar
Raymond Knopp committed
660
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
661
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
662 663 664 665 666 667 668 669 670 671 672 673

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
Raymond Knopp's avatar
 
Raymond Knopp committed
674 675
    }
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
676
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
Raymond Knopp's avatar
 
Raymond Knopp committed
677
    if (i<openair0_cfg[0].tx_num_channels) {
Raymond Knopp's avatar
Raymond Knopp committed
678 679
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
680
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Raymond Knopp's avatar
Raymond Knopp committed
681 682
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
Raymond Knopp's avatar
 
Raymond Knopp committed
683 684
    }
  }
Raymond Knopp's avatar
Raymond Knopp committed
685 686


Raymond Knopp's avatar
 
Raymond Knopp committed
687 688
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
Raymond Knopp's avatar
 
Raymond Knopp committed
689 690

  // create tx & rx streamer
Raymond Knopp's avatar
 
Raymond Knopp committed
691
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
Raymond Knopp's avatar
 
Raymond Knopp committed
692
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
Raymond Knopp's avatar
 
Raymond Knopp committed
693
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
Raymond Knopp's avatar
 
Raymond Knopp committed
694 695 696 697 698 699 700
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
Raymond Knopp's avatar
 
Raymond Knopp committed
701
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
Raymond Knopp's avatar
 
Raymond Knopp committed
702 703
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
Raymond Knopp's avatar
 
Raymond Knopp committed
704 705
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

Raymond Knopp's avatar
 
Raymond Knopp committed
706 707

  s->usrp->set_time_now(uhd::time_spec_t(0.0));
708
 
709

Raymond Knopp's avatar
Raymond Knopp committed
710 711
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
Raymond Knopp's avatar
 
Raymond Knopp committed
712
      printf("RX Channel %lu\n",i);
Raymond Knopp's avatar
Raymond Knopp committed
713 714 715 716 717 718 719 720 721 722 723
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
Raymond Knopp's avatar
 
Raymond Knopp committed
724
      printf("TX Channel %lu\n",i);
Raymond Knopp's avatar
Raymond Knopp committed
725 726 727 728 729 730 731 732
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

Raymond Knopp's avatar
 
Raymond Knopp committed
733
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
Raymond Knopp's avatar
 
Raymond Knopp committed
734 735 736 737

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
738 739 740 741 742 743 744
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
745
  
746
  s->sample_rate = openair0_cfg[0].sample_rate;
Raymond Knopp's avatar
 
Raymond Knopp committed
747 748 749 750 751 752 753 754 755
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
756
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
757
}
758
/*@}*/