build_helper 21.6 KB
Newer Older
1 2 3 4 5
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
6
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

22
# file build_helper
thomasl's avatar
thomasl committed
23
# brief
24
# authors Laurent Thomas, Lionel GAUTHIER
thomasl's avatar
thomasl committed
25 26
#
#######################################
27 28 29 30 31 32 33
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
34 35 36 37 38
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
39 40 41 42
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

43
SUDO='sudo -E'
thomasl's avatar
thomasl committed
44

45 46 47 48 49 50 51
###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
52
blue='\E[1;34m'
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

cecho()  {  
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

77 78 79
########################
# distribution helpers #
########################
80

81 82 83 84
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
85 86
#   ubuntu16.04
#   debian8.5
87
get_distribution_release() {
88 89
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
90 91 92 93
    else
        echo Unknown
    fi
}
94

95 96 97
check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
98 99
        "ubuntu17.10") return 0 ;;
        "ubuntu17.04") return 0 ;;
100 101 102 103 104
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
        "centos7")     return 0 ;;
105 106 107
    esac
    return 1
}
108

109 110 111 112 113 114 115 116 117 118 119
##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT
120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
147
 set_openair_env
148
 dir=$OPENAIR_DIR/cmake_targets
149
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/* 
150 151 152
 rm -rf $dir/lte_build_oai $dir/lte-simulators/build
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build 
153 154 155 156 157 158
}

###################################
# Compilers
###################################

159 160 161 162 163 164 165 166 167 168 169 170 171 172
#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1"|wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

thomasl's avatar
thomasl committed
173
compilations() {
thomasl's avatar
thomasl committed
174
  cd $OPENAIR_DIR/cmake_targets/$1/build
175
  set +e
thomasl's avatar
thomasl committed
176 177
  {
    rm -f $3
178 179 180 181 182 183
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       make -j`nproc` $2
    fi

thomasl's avatar
thomasl committed
184
  } > $dlog/$2.$REL.txt 2>&1
185
  set -e
186
  echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
187
  if [ -s $3 ] ; then
188
     cp $3 $4
thomasl's avatar
thomasl committed
189
     echo_success "$2 compiled"
190
     check_warnings "$dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
191
  else
thomasl's avatar
thomasl committed
192
     echo_error "$2 compilation failed"
193
     exit 1
thomasl's avatar
thomasl committed
194 195 196
  fi
}

197 198 199 200
############################################
# External packages installers
############################################

201
install_protobuf_from_source(){
202 203 204
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
205 206
    cd /tmp
    echo "Downloading protobuf"
207 208 209 210 211 212 213 214
    #rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    #wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
    #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
    #cd protobuf-2.6.1/
    rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
    wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $USER --no-same-owner
    cd protobuf-3.3.0/
215 216 217 218 219
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
220
    ) >& $protobuf_install_log
221 222 223
}

install_protobuf_c_from_source(){
224 225 226
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
227 228 229
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
        export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
    fi
230 231 232 233 234
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
235
	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
236 237 238 239 240 241
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
242
    ) >& $protobuf_c_install_log
243 244
}

245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265
install_usrp_uhd_driver_from_source(){
    uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
    echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
    (
    cd /tmp
    echo "Downloading UHD driver"
    rm -rf /tmp/uhd
    git clone git://github.com/EttusResearch/uhd.git
    cd uhd
    git checkout tags/release_003_010_001_001
    mkdir -p host/build
    cd host/build
    $CMAKE ../
    echo "Compiling UHD"
    make
    make test
    $SUDO make install
    $SUDO ldconfig
    ) >& $uhd_install_log
}

thomasl's avatar
thomasl committed
266
check_install_usrp_uhd_driver(){
267
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
268
        #first we remove old installation
269 270
        $SUDO apt-get remove -y uhd || true
        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y
thomasl's avatar
thomasl committed
271
        v=$(lsb_release -cs)
272 273 274
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
        #The new USRP repository
        $SUDO add-apt-repository ppa:ettusresearch/uhd -y
thomasl's avatar
thomasl committed
275
        $SUDO apt-get update
276 277
        $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
        $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
278
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
279 280 281 282 283 284 285 286
        $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
        if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
            # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
            $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
            install_ursp_uhd_driver_from_source
        else
            $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
        fi
287
    fi
288 289 290
}

install_usrp_uhd_driver() {
291
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
292 293 294
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
295 296 297 298 299 300
    fi
    if [ -z $1 ]; then
      $SUDO uhd_images_downloader
    else
      $SUDO uhd_images_downloader -i $1
    fi
thomasl's avatar
thomasl committed
301
}
302

303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329
install_bladerf_driver_from_source(){
    bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
    echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
    (
    cd /tmp
    echo "Downloading BladeRF driver"
    rm -rf /tmp/bladeRF
    git clone https://github.com/Nuand/bladeRF.git
    cd bladeRF
    git checkout tags/2016.06
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling BladeRF driver"
    make
    $SUDO make install
    $SUDO ldconfig
    echo "Downloading FPGA and firmware images"
    cd /tmp/bladeRF
    wget https://www.nuand.com/fx3/bladeRF_fw_latest.img
    wget https://www.nuand.com/fpga/hostedx40-latest.rbf
    sudo mkdir -p /usr/share/Nuand/bladeRF
    sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
    sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
    ) >& $bladerf_install_log
}

330
check_install_bladerf_driver(){
331 332 333 334 335 336 337 338
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
            $SUDO add-apt-repository -y ppa:bladerf/bladerf
            $SUDO apt-get update
        fi
        $SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
        $SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40	
339 340
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        install_bladerf_driver_from_source
341 342 343
   else
        echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
   fi
344 345 346 347
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
348
}
thomasl's avatar
thomasl committed
349

350 351 352 353 354 355 356 357 358 359 360 361 362 363 364
check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
                echo_fatal "Cannot compile lmssdr device" 
	fi


}

thomasl's avatar
thomasl committed
365
check_install_additional_tools (){
366 367
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
368
    PACKAGE_LIST="\
thomasl's avatar
thomasl committed
369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
385
	vlan	  \
386
	ctags \
387 388
        ntpdate \
        iperf3 \
Rohit Gupta's avatar
Rohit Gupta committed
389 390 391
        android-tools-adb \
	wvdial \
        python-numpy \
392 393 394 395 396
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
397
        python-matplotlib"
398
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
399
    PACKAGE_LIST="\
400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
423 424 425
      python-netifaces \
      scipy \
      python-matplotlib"
426
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
427
    PACKAGE_LIST=" \
428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
451 452 453 454 455 456
      python-netifaces \
      python2-scipy \
      python2-matplotlib"
  fi
    $SUDO $INSTALLER install -y $PACKAGE_LIST
    
457
    $SUDO rm -fr /opt/ssh
458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh

  #The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    $SUDO pip install paramiko
    $SUDO pip install pyroute2 colorama
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
    ) >& $log_netiface
474
  fi
thomasl's avatar
thomasl committed
475 476 477
}

check_install_oai_software() {
478
    local specific_packages=""
479 480 481 482
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
483 484
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
485 486
    local LAPACK_LIBNAME="liblapack.so"
    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
487
    $SUDO apt install -y software-properties-common
488
    case "$(get_distribution_release)" in
489
        "ubuntu14.04")
490
            specific_packages="libtasn1-3-dev gccxml libgnutls-dev libatlas-dev"
491 492 493
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
494
            ;;
495
        "ubuntu16.04")
496 497 498 499 500 501 502 503 504
            specific_packages="libtasn1-6-dev gccxml libgnutls-dev libatlas-dev"
            ;;
        "ubuntu17.04")
            specific_packages="libtasn1-6-dev castxml libgnutls28-dev libatlas-dev"
            ;;
        "ubuntu17.10")
            specific_packages="libtasn1-6-dev castxml libgnutls28-dev"
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
505
            ;;
506
    esac
507
    $SUDO apt-get install -y \
508
    $specific_packages \
509
	autoconf  \
thomasl's avatar
thomasl committed
510 511 512 513 514 515
	automake  \
	bison  \
	build-essential \
	cmake \
	cmake-curses-gui  \
	doxygen \
516 517
	doxygen-gui \
	texlive-latex-base \
thomasl's avatar
thomasl committed
518 519
	ethtool \
	flex  \
520 521
	gdb  \
	git \
thomasl's avatar
thomasl committed
522 523 524 525 526 527 528 529 530 531
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iproute \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libblas-dev \
	libconfig8-dev \
532
	libffi-dev \
thomasl's avatar
thomasl committed
533 534 535 536 537 538
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
539
	libidn11-dev \
thomasl's avatar
thomasl committed
540
	libmysqlclient-dev  \
541
	liboctave-dev \
thomasl's avatar
thomasl committed
542
	libpgm-dev \
543
	libpython2.7-dev \
thomasl's avatar
thomasl committed
544 545 546 547 548 549 550
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
551
	libxslt1-dev \
552 553 554
	mscgen  \
	octave \
	octave-signal \
thomasl's avatar
thomasl committed
555 556 557 558
	openssh-client \
	openssh-server \
	openssl \
	python  \
559
	subversion \
560 561 562
	xmlstarlet \
	python-pip \
	pydb \
563
	libyaml-dev \
564 565
	wget \
	libxpm-dev
Rohit Gupta's avatar
Rohit Gupta committed
566

567
    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
568

569
    $SUDO apt-get install -y nettle-dev nettle-bin
570 571 572 573 574 575 576 577 578 579 580 581 582 583 584
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
      $SUDO $INSTALLER install -y python-epdb
      $SUDO $INSTALLER install -y gccxml
    else
      $SUDO $INSTALLER install -y mscgen pydb
      # Fedora repos already contain gccxml's successor castxml.
      $SUDO $INSTALLER install -y castxml
    fi
585
    
586 587 588
    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
589
      bc \
590
      bison \
591
      $CMAKE \
592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      octave-devel \
      openpgm-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      octave \
      octave-signal \
      openssh-clients \
      openssh-server \
      openssl \
632 633
      patch \
      psmisc \
634 635 636 637 638 639
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
640
      kernel-devel \
641
      nettle-devel \
642 643 644 645 646
      gnutls-devel \
      libXpm-devel \
      lapack \
      lapack-devel \
      blas \
647
      blas-devel
648 649
  fi

thomasl's avatar
thomasl committed
650
    install_asn1c_from_source
651 652
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
thomasl's avatar
thomasl committed
653 654
}

thomasl's avatar
thomasl committed
655
install_asn1c_from_source(){
656 657
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
658
    (
659
    $SUDO rm -rf /tmp/asn1c
660
    GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
661
    cd /tmp/asn1c
thomasl's avatar
thomasl committed
662
    ./configure
663
    make -j`nproc`
664
    $SUDO make install
Rohit Gupta's avatar
Rohit Gupta committed
665
    cd -
666
    $SUDO ldconfig
667
    ) > $asn1_install_log 2>&1
thomasl's avatar
thomasl committed
668 669 670 671 672
}

#################################################
# 2. compile 
################################################
thomasl's avatar
thomasl committed
673

thomasl's avatar
thomasl committed
674
install_nas_tools() {
675
  if [ ! -f .ue.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
676
    echo_success "generate .ue_emm.nvram .ue.nvram"
677
    ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
678
  else
679
    [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
680
  fi
thomasl's avatar
thomasl committed
681

682
  if [ ! -f .usim.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
683
    echo_success "generate .usim.nvram"
684
    ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
685
  else
686
    [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
687
  fi
thomasl's avatar
thomasl committed
688 689

}
690

thomasl's avatar
thomasl committed
691 692 693 694 695 696 697 698 699

################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
thomasl's avatar
thomasl committed
700
    openair_path=${openair_path%/openair[123]/*}    
thomasl's avatar
thomasl committed
701 702 703 704 705 706 707
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

708 709 710 711 712 713 714 715
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
716 717
echo_info "** Calling sync now..."
sync 
718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
735 736 737 738 739
           do  
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
740 741 742 743 744 745 746 747 748
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
Rohit Gupta's avatar
Rohit Gupta committed
766
}