usrp_lib.cpp 36 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.0  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

/** usrp_lib.cpp
 *
 * \author: HongliangXU : hong-liang-xu@agilent.com
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
#include <uhd/version.hpp>
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <boost/thread.hpp>
#include <boost/format.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
#include <time.h>
#include "UTIL/LOG/log_extern.h"
#include "common_lib.h"
#include "assertions.h"

#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif

#ifdef __AVX2__
#  include <immintrin.h>
#endif

#ifdef __arm__
#  include <arm_neon.h>
#endif

/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */
typedef struct {

    // --------------------------------
    // variables for USRP configuration
    // --------------------------------
    //! USRP device pointer
    uhd::usrp::multi_usrp::sptr usrp;

    //create a send streamer and a receive streamer
    //! USRP TX Stream
    uhd::tx_streamer::sptr tx_stream;
    //! USRP RX Stream
    uhd::rx_streamer::sptr rx_stream;

    //! USRP TX Metadata
    uhd::tx_metadata_t tx_md;
    //! USRP RX Metadata
    uhd::rx_metadata_t rx_md;

    //! Sampling rate
    double sample_rate;

    //! TX forward samples. We use usrp_time_offset to get this value
    int tx_forward_nsamps; //166 for 20Mhz

    // --------------------------------
    // Debug and output control
    // --------------------------------
    int num_underflows;
    int num_overflows;
    int num_seq_errors;
    int64_t tx_count;
    int64_t rx_count;
    int wait_for_first_pps;
    int use_gps;
    //! timestamp of RX packet
    openair0_timestamp rx_timestamp;

} usrp_state_t;

//void print_notes(void)
//{
    // Helpful notes
  //  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
  //  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
  //  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
  //  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
  //  std::cout << boost::format("****************************************************************************************************************\n");
//}

static int sync_to_gps(openair0_device *device)
{
    uhd::set_thread_priority_safe();

    //std::string args;

    //Set up program options
    //po::options_description desc("Allowed options");
    //desc.add_options()
    //("help", "help message")
    //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
    //;
    //po::variables_map vm;
    //po::store(po::parse_command_line(argc, argv, desc), vm);
    //po::notify(vm);

    //Print the help message
    //if (vm.count("help"))
    //{
      //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
      // return EXIT_FAILURE;
    //}

    //Create a USRP device
    //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
    //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
    //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
 
    usrp_state_t *s = (usrp_state_t*)device->priv;    

    try
    {
        size_t num_mboards = s->usrp->get_num_mboards();
        size_t num_gps_locked = 0;
        for (size_t mboard = 0; mboard < num_mboards; mboard++)
        {
            std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;

            //Set references to GPSDO
            s->usrp->set_clock_source("gpsdo", mboard);
            s->usrp->set_time_source("gpsdo", mboard);

            //std::cout << std::endl;
            //print_notes();
            //std::cout << std::endl;

            //Check for 10 MHz lock
            std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);
            if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())
            {
                std::cout << "Waiting for reference lock..." << std::flush;
                bool ref_locked = false;
                for (int i = 0; i < 30 and not ref_locked; i++)
                {
                    ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();
                    if (not ref_locked)
                    {
                        std::cout << "." << std::flush;
                        boost::this_thread::sleep(boost::posix_time::seconds(1));
                    }
                }
                if(ref_locked)
                {
                    std::cout << "LOCKED" << std::endl;
                } else {
                    std::cout << "FAILED" << std::endl;
                    std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
                    exit(EXIT_FAILURE);
                }
            }
            else
            {
                std::cout << boost::format("ref_locked sensor not present on this board.\n");
            }

            //Wait for GPS lock
            bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
            if(gps_locked)
            {
                num_gps_locked++;
                std::cout << boost::format("GPS Locked\n");
            }
            else
            {
                std::cerr << "WARNING:  GPS not locked - time will not be accurate until locked" << std::endl;
            }

            //Set to GPS time
            uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
            s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));

            //Wait for it to apply
            //The wait is 2 seconds because N-Series has a known issue where
            //the time at the last PPS does not properly update at the PPS edge
            //when the time is actually set.
            boost::this_thread::sleep(boost::posix_time::seconds(2));

            //Check times
            gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
            std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
            std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
            //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
            //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
            //else
            //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
        }

        if (num_gps_locked == num_mboards and num_mboards > 1)
        {
            //Check to see if all USRP times are aligned
            //First, wait for PPS.
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();
            while (time_last_pps == s->usrp->get_time_last_pps())
            {
                boost::this_thread::sleep(boost::posix_time::milliseconds(1));
            }

            //Sleep a little to make sure all devices have seen a PPS edge
            boost::this_thread::sleep(boost::posix_time::milliseconds(200));

            //Compare times across all mboards
            bool all_matched = true;
            uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);
            for (size_t mboard = 1; mboard < num_mboards; mboard++)
            {
                uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);
                if (mboard_time != mboard0_time)
                {
                    all_matched = false;
                    std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                                  % mboard0_time.get_real_secs()
                                  % mboard
                                  % mboard_time.get_real_secs()) << std::endl;
                }
            }
            if (all_matched)
            {
                std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
            } else {
                std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
            }
        }
    }
    catch (std::exception& e)
    {
        std::cout << boost::format("\nError: %s") % e.what();
        std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
        std::cout << boost::format("Visit one of these pages if the problem persists:\n");
        std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
        std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
        std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
        exit(EXIT_FAILURE);
    }

    return EXIT_SUCCESS;
}

/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
static int trx_usrp_start(openair0_device *device) {

    usrp_state_t *s = (usrp_state_t*)device->priv;


  // setup GPIO for TDD, GPIO(4) = ATR_RX
  //set data direction register (DDR) to output
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
  
  //set control register to ATR
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
  
  //set ATR register
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);

    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
    // should be s->usrp->get_time_next_pps(&cmd.time_spec); 
    //cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
    cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);    
    cmd.stream_now = false; // start at constant delay
    s->rx_stream->issue_stream_cmd(cmd);

    if (s->use_gps == 1) s->wait_for_first_pps = 1;
    else s->wait_for_first_pps = 0; 

    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;

    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
    return 0;
}
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
 * \param device the hardware to use
 */
static void trx_usrp_end(openair0_device *device) {
    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;

}

/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
    int ret=0;
    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_md.has_time_spec = flags;


    if(flags>0)
        s->tx_md.has_time_spec = true;
    else
        s->tx_md.has_time_spec = false;

    if (flags == 2) { // start of burst
        s->tx_md.start_of_burst = true;
        s->tx_md.end_of_burst = false;
    } else if (flags == 3) { // end of burst
        s->tx_md.start_of_burst = false;
        s->tx_md.end_of_burst = true;
    } else if (flags == 4) { // start and end
        s->tx_md.start_of_burst = true;
        s->tx_md.end_of_burst = true;
    } else if (flags==1) { // middle of burst
        s->tx_md.start_of_burst = false;
        s->tx_md.end_of_burst = false;
    }

    if (cc>1) {
        std::vector<void *> buff_ptrs;
        for (int i=0; i<cc; i++)
            buff_ptrs.push_back(buff[i]);
        ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
    } else
        ret = (int)s->tx_stream->send(buff[0], nsamps, s->tx_md,1e-3);



    if (ret != nsamps)
        LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);

    return ret;
}

/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
    usrp_state_t *s = (usrp_state_t*)device->priv;
    int samples_received=0,i,j;
    int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
#else
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
#endif
#elif defined(__arm__)
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
#endif

    if (device->type == USRP_B200_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;
            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received=0;
            while (samples_received != nsamps) {
                samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                       nsamps-samples_received, s->rx_md);
                if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
                    break;
	        if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) { printf("sleep...\n");} //usleep(100); 
            }
	    if (samples_received == nsamps) s->wait_for_first_pps=0;
        }
        // bring RX data into 12 LSBs for softmodem RX
        for (int i=0; i<cc; i++) {
            for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
                ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
#else
                ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
#endif
#elif defined(__arm__)
                ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
#endif
            }
        }
    } else if (device->type == USRP_X300_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;

            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
        }
    }
    if (samples_received < nsamps)
        LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);

    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
        LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());

    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
    return samples_received;
}

/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
static bool is_equal(double a, double b) {
    return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}

void *freq_thread(void *arg) {

    openair0_device *device=(openair0_device *)arg;
    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success
 */
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dont_block) {

    usrp_state_t *s = (usrp_state_t*)device->priv;
    pthread_t f_thread;

    printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);

    // spawn a thread to handle the frequency change to not block the calling thread
    if (dont_block == 1)
        pthread_create(&f_thread,NULL,freq_thread,(void*)device);
    else {
        s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
        s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
    }

    return(0);

}

/*! \brief Set RX frequencies
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success
 */
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

    usrp_state_t *s = (usrp_state_t*)device->priv;
    static int first_call=1;
    static double rf_freq,diff;

    uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

    rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
    rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
    rf_freq=openair0_cfg[0].rx_freq[0];
    s->usrp->set_rx_freq(rx_tune_req);

    return(0);

}

/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success
 */
int trx_usrp_set_gains(openair0_device* device,
                       openair0_config_t *openair0_cfg) {

    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
    ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
    // limit to maximum gain
    if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
        LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
              openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
        exit(-1);
    }
    s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
    LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
          openair0_cfg[0].rx_gain[0],gain_range.stop());

    return(0);
}

/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
int trx_usrp_stop(openair0_device* device) {
    return(0);
}

/*! \brief USRPB210 RX calibration table */
rx_gain_calib_table_t calib_table_b210[] = {
    {3500000000.0,44.0},
    {2660000000.0,49.0},
    {2300000000.0,50.0},
    {1880000000.0,53.0},
    {816000000.0,58.0},
    {-1,0}
};

/*! \brief USRPB210 RX calibration table */
rx_gain_calib_table_t calib_table_b210_38[] = {
    {3500000000.0,44.0},
    {2660000000.0,49.8},
    {2300000000.0,51.0},
    {1880000000.0,53.0},
    {816000000.0,57.0},
    {-1,0}
};

/*! \brief USRPx310 RX calibration table */
rx_gain_calib_table_t calib_table_x310[] = {
    {3500000000.0,77.0},
    {2660000000.0,81.0},
    {2300000000.0,81.0},
    {1880000000.0,82.0},
    {816000000.0,85.0},
    {-1,0}
};

/*! \brief Set RX gain offset
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success
 */
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {

    int i=0;
    // loop through calibration table to find best adjustment factor for RX frequency
    double min_diff = 6e9,diff,gain_adj=0.0;
    if (bw_gain_adjust==1) {
        switch ((int)openair0_cfg[0].sample_rate) {
        case 30720000:
            break;
        case 23040000:
            gain_adj=1.25;
            break;
        case 15360000:
            gain_adj=3.0;
            break;
        case 7680000:
            gain_adj=6.0;
            break;
        case 3840000:
            gain_adj=9.0;
            break;
        case 1920000:
            gain_adj=12.0;
            break;
        default:
            LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
            exit(-1);
            break;
        }
    }
    while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
        diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
        LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
              i,
              openair0_cfg->rx_gain_calib_table[i].freq,
              openair0_cfg->rx_gain_calib_table[i].offset,diff);
        if (min_diff > diff) {
            min_diff = diff;
            openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
        }
        i++;
    }
}

/*! \brief print the USRP statistics
* \param device the hardware to use
* \returns  0 on success
*/
int trx_usrp_get_stats(openair0_device* device) {
    return(0);
}

/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
int trx_usrp_reset_stats(openair0_device* device) {
    return(0);
}

extern "C" {
    /*! \brief Initialize Openair USRP target. It returns 0 if OK
    * \param device the hardware to use
         * \param openair0_cfg RF frontend parameters set by application
         */
    int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
        uhd::set_thread_priority_safe(1.0);
        usrp_state_t *s = (usrp_state_t*)calloc(sizeof(usrp_state_t),1);
        
	if (openair0_cfg[0].clock_source==gpsdo)        
	    s->use_gps =1;

        // Initialize USRP device
        device->openair0_cfg = openair0_cfg;

        std::string args = "type=b200";
        uhd::device_addrs_t device_adds = uhd::device::find(args);

        int vers=0,subvers=0,subsubvers=0;
        int bw_gain_adjust=0;

        sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
        LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
              uhd::get_version_string().c_str(),vers,subvers,subsubvers);

        if(device_adds.size() == 0)  {
            double usrp_master_clock = 184.32e6;
            std::string args = "type=x300";

            // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
            args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);

//    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";

            //    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
            uhd::device_addrs_t device_adds = uhd::device::find(args);

            if(device_adds.size() == 0) {
                std::cerr<<"No USRP Device Found. " << std::endl;
                free(s);
                return -1;
            }
            LOG_I(PHY,"Found USRP X300\n");
            s->usrp = uhd::usrp::multi_usrp::make(args);
            // lock mboard clocks
            if (openair0_cfg[0].clock_source == internal)
                s->usrp->set_clock_source("internal");
            else
                s->usrp->set_clock_source("external");

            //Setting device type to USRP X300/X310
            device->type=USRP_X300_DEV;

            // this is not working yet, master clock has to be set via constructor
            // set master clock rate and sample rate for tx & rx for streaming
            //s->usrp->set_master_clock_rate(usrp_master_clock);

            openair0_cfg[0].rx_gain_calib_table = calib_table_x310;

            switch ((int)openair0_cfg[0].sample_rate) {
            case 30720000:
                // from usrp_time_offset
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 15;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 45;
                openair0_cfg[0].tx_bw                 = 10e6;
                openair0_cfg[0].rx_bw                 = 10e6;
                break;
            case 7680000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 5e6;
                openair0_cfg[0].rx_bw                 = 5e6;
                break;
            case 1920000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 1.25e6;
                openair0_cfg[0].rx_bw                 = 1.25e6;
                break;
            default:
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }

        } else {
            LOG_I(PHY,"Found USRP B200\n");
            args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
            s->usrp = uhd::usrp::multi_usrp::make(args);

            //  s->usrp->set_rx_subdev_spec(rx_subdev);
            //  s->usrp->set_tx_subdev_spec(tx_subdev);

            // do not explicitly set the clock to "internal", because this will disable the gpsdo
            //    // lock mboard clocks
            //    s->usrp->set_clock_source("internal");
            // set master clock rate and sample rate for tx & rx for streaming

            // lock mboard clocks
            if (openair0_cfg[0].clock_source == internal){
	        s->usrp->set_clock_source("internal");
            }
            else{
                s->usrp->set_clock_source("external");
		s->usrp->set_time_source("external");
            }	

            device->type = USRP_B200_DEV;
            if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
                bw_gain_adjust=0;
            } else {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
                bw_gain_adjust=1;
            }

            switch ((int)openair0_cfg[0].sample_rate) {
            case 30720000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 115;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 23040000:
                s->usrp->set_master_clock_rate(23.04e6); //to be checked
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 113;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                s->usrp->set_master_clock_rate(30.72e06);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 103;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 7680000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 80;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 1920000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 40;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            default:
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }
        }

        /* device specific */
        //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
        //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
        openair0_cfg[0].iq_txshift = 4;//shift
        openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

        for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
            if (i<openair0_cfg[0].rx_num_channels) {
                s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
                set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);

                ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
                // limit to maximum gain
                AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                             "RX Gain too high, lower by %f dB\n",
                             openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
                s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
                LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                      openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                      openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
            }
        }
        for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
            if (i<openair0_cfg[0].tx_num_channels) {
                s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
                s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
            }
        }

        //s->usrp->set_clock_source("external");
        //s->usrp->set_time_source("external");

        // display USRP settings
        LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
        sleep(1);

        // create tx & rx streamer
        uhd::stream_args_t stream_args_rx("sc16", "sc16");
        int samples=openair0_cfg[0].sample_rate;
	int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
        samples/=10000;
	LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);
	if ( samples < max )
	  stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
	LOG_I(PHY,"rx_max_num_samps %zu\n",
	      s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

        for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
            stream_args_rx.channels.push_back(i);
        s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
	
        uhd::stream_args_t stream_args_tx("sc16", "sc16");
        for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
            stream_args_tx.channels.push_back(i);
        s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

        /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
        for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
            s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

        for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
            s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

        for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
            LOG_I(PHY,"RX Channel %d\n",i);
            LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
            LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
            LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
            LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
        }

        for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
            LOG_I(PHY,"TX Channel %d\n",i);
            LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
            LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
            LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
            LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
        }

        LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());

        device->priv = s;
        device->trx_start_func = trx_usrp_start;
        device->trx_write_func = trx_usrp_write;
        device->trx_read_func  = trx_usrp_read;
        device->trx_get_stats_func = trx_usrp_get_stats;
        device->trx_reset_stats_func = trx_usrp_reset_stats;
        device->trx_end_func   = trx_usrp_end;
        device->trx_stop_func  = trx_usrp_stop;
        device->trx_set_freq_func = trx_usrp_set_freq;
        device->trx_set_gains_func   = trx_usrp_set_gains;
        device->openair0_cfg = openair0_cfg;

        s->sample_rate = openair0_cfg[0].sample_rate;
        // TODO:
        // init tx_forward_nsamps based usrp_time_offset ex
        if(is_equal(s->sample_rate, (double)30.72e6))
            s->tx_forward_nsamps  = 176;
        if(is_equal(s->sample_rate, (double)15.36e6))
            s->tx_forward_nsamps = 90;
        if(is_equal(s->sample_rate, (double)7.68e6))
            s->tx_forward_nsamps = 50;

        if (s->use_gps == 1) {
	   if (sync_to_gps(device)) {
		 LOG_I(PHY,"USRP fails to sync with GPS...\n");
            exit(0);   
           } 
        }
 
        return 0;
    }
}
/*@}*/