runTestOnVM.sh 26 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695
#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

function usage {
    echo "OAI VM Test Run script"
    echo "   Original Author: Raphael Defosseux"
    echo "   Default:"
    echo "     -- eNB with USRP"
    echo ""
    echo "Usage:"
    echo "------"
    echo "    runTestOnVM.sh [OPTIONS]"
    echo ""
    echo "Options:"
    echo "--------"
    echo "    --job-name #### OR -jn ####"
    echo "    Specify the name of the Jenkins job."
    echo ""
    echo "    --build-id #### OR -id ####"
    echo "    Specify the build ID of the Jenkins job."
    echo ""
    echo "    --workspace #### OR -ws ####"
    echo "    Specify the workspace."
    echo ""
    echo "    --variant enb-usrp     OR -v1"
    echo "    --variant basic-sim    OR -v2"
    echo "    --variant phy-sim      OR -v3"
    echo "    --variant cppcheck     OR -v4"
    echo "    --variant enb-ethernet OR -v7"
    echo "    --variant ue-ethernet  OR -v8"
    echo "    Specify the variant to build."
    echo ""
    echo "    --keep-vm-alive OR -k"
    echo "    Keep the VM alive after the build."
    echo ""
    echo "    --help OR -h"
    echo "    Print this help message."
    echo ""
}

function variant_usage {
    echo "OAI VM Test Run script"
    echo "   Original Author: Raphael Defosseux"
    echo ""
    echo "    --variant enb-usrp     OR -v1"
    echo "    --variant basic-sim    OR -v2"
    echo "    --variant phy-sim      OR -v3"
    echo "    --variant cppcheck     OR -v4"
    echo "    --variant enb-ethernet OR -v7"
    echo "    --variant ue-ethernet  OR -v8"
    echo ""
}

function terminate_enb_ue_basic_sim {
    echo "echo \"sudo daemon --name=enb_daemon --stop\"" > $1
    echo "sudo daemon --name=enb_daemon --stop" >> $1
    echo "echo \"sudo daemon --name=ue_daemon --stop\"" >> $1
    echo "sudo daemon --name=ue_daemon --stop" >> $1
    echo "echo \"sudo killall --signal SIGKILL lte-softmodem\"" >> $1
    echo "sudo killall --signal SIGKILL lte-softmodem" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

function terminate_ltebox_epc {
    echo "echo \"cd /opt/ltebox/tools\"" > $1
    echo "cd /opt/ltebox/tools" >> $1
    echo "echo \"sudo ./stop_ltebox\"" >> $1
    echo "sudo ./stop_ltebox" >> $1
    echo "echo \"sudo daemon --name=simulated_hss --stop\"" >> $1
    echo "sudo daemon --name=simulated_hss --stop" >> $1
    echo "echo \"sudo killall --signal SIGKILL hss_sim\"" >> $1
    echo "sudo killall --signal SIGKILL hss_sim" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
}

if [ $# -lt 1 ] || [ $# -gt 9 ]
then
    echo "Syntax Error: not the correct number of arguments"
    echo ""
    usage
    exit 1
fi

VM_TEMPLATE=ci-
JOB_NAME=XX
BUILD_ID=XX
VM_NAME=ci-enb-usrp
ARCHIVES_LOC=enb_usrp/test
KEEP_VM_ALIVE=0
RUN_OPTIONS="none"
STATUS=0

while [[ $# -gt 0 ]]
do
key="$1"

case $key in
    -h|--help)
    shift
    usage
    exit 0
    ;;
    -jn|--job-name)
    JOB_NAME="$2"
    shift
    shift
    ;;
    -id|--build-id)
    BUILD_ID="$2"
    shift
    shift
    ;;
    -ws|--workspace)
    JENKINS_WKSP="$2"
    shift
    shift
    ;;
    -k|--keep-vm-alive)
    KEEP_VM_ALIVE=1
    shift
    ;;
    -v1)
    VM_NAME=ci-enb-usrp
    shift
    ;;
    -v2)
    VM_NAME=ci-basic-sim
    RUN_OPTIONS="complex"
    ARCHIVES_LOC=basic_sim/test
    shift
    ;;
    -v3)
    VM_NAME=ci-phy-sim
    RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
    ARCHIVES_LOC=phy_sim/test
    shift
    ;;
    -v4)
    VM_NAME=ci-cppcheck
    shift
    ;;
    -v7)
    VM_NAME=ci-enb-ethernet
    shift
    ;;
    -v8)
    VM_NAME=ci-ue-ethernet
    shift
    ;;
    --variant)
    variant="$2"
    case $variant in
        enb-usrp)
        VM_NAME=ci-enb-usrp
        ;;
        basic-sim)
        VM_NAME=ci-basic-sim
        RUN_OPTIONS="complex"
        ARCHIVES_LOC=basic_sim/test
        ;;
        phy-sim)
        VM_NAME=ci-phy-sim
        RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
        ARCHIVES_LOC=phy_sim/test
        ;;
        cppcheck)
        VM_NAME=ci-cppcheck
        ;;
        enb-ethernet)
        VM_NAME=ci-enb-ethernet
        ;;
        ue-ethernet)
        VM_NAME=ci-ue-ethernet
        ;;
        *)
        echo ""
        echo "Syntax Error: Invalid Variant option -> $variant"
        echo ""
        variant_usage
        exit 1
    esac
    shift
    shift
    ;;
    *)
    echo "Syntax Error: unknown option: $key"
    echo ""
    usage
    exit 1
esac
done

if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
then
    VM_TEMPLATE=ci-
else
    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
fi

VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
VM_CMDS=${VM_NAME}_cmds.txt
ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}

echo "VM_NAME             = $VM_NAME"
echo "VM_CMD_FILE         = $VM_CMDS"
echo "JENKINS_WKSP        = $JENKINS_WKSP"
echo "ARCHIVES_LOC        = $ARCHIVES_LOC"

echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure

VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"

if [ "$RUN_OPTIONS" == "none" ]
then
    echo "No run on VM testing for this variant currently"
    exit $STATUS
fi

if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
    echo "############################################################"
    echo "Running test script on VM ($VM_NAME)"
    echo "############################################################"
    echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
    echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
    echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
    echo "cd tmp" >> $VM_CMDS
    echo "echo \"source oaienv\"" >> $VM_CMDS
    echo "source oaienv" >> $VM_CMDS
    echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
    echo "cd cmake_targets/autotests" >> $VM_CMDS
    echo "echo \"rm -Rf log\"" >> $VM_CMDS
    echo "rm -Rf log" >> $VM_CMDS
    echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
    echo "$RUN_OPTIONS" >> $VM_CMDS
    echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
    echo "cd log" >> $VM_CMDS
    echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS

    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS

    echo "############################################################"
    echo "Creating a tmp folder to store results and artifacts"
    echo "############################################################"

    if [ -d $ARCHIVES_LOC ]
    then
        rm -Rf $ARCHIVES_LOC
    fi
    mkdir --parents $ARCHIVES_LOC

    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
    pushd $ARCHIVES_LOC
    unzip -qq -DD tmp.zip
    rm tmp.zip
    if [ -f results_autotests.xml ]
    then
        FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
        NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
        echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
        echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
        cat results_autotests.xml >> $NEW_NAME
        sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
        #mv results_autotests.xml $NEW_NAME
        rm results_autotests.xml
    fi
    popd

    if [ $KEEP_VM_ALIVE -eq 0 ]
    then
        echo "############################################################"
        echo "Destroying VM"
        echo "############################################################"
        uvt-kvm destroy $VM_NAME
        ssh-keygen -R $VM_IP_ADDR
    fi
    rm -f $VM_CMDS

    echo "############################################################"
    echo "Checking run status"
    echo "############################################################"

    LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
    NB_FOUND_FILES=0
    NB_RUNS=0
    NB_FAILURES=0

    for FULLFILE in $LOG_FILES
    do
        TESTSUITES=`egrep "testsuite errors" $FULLFILE`
        for TESTSUITE in $TESTSUITES
        do
            if [[ "$TESTSUITE" == *"tests="* ]]
            then
                RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                NB_RUNS=$((NB_RUNS + RUNS))
            fi
            if [[ "$TESTSUITE" == *"failures="* ]]
            then
                FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                NB_FAILURES=$((NB_FAILURES + FAILS))
            fi
        done
        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
    done

    echo "NB_FOUND_FILES = $NB_FOUND_FILES"
    echo "NB_RUNS        = $NB_RUNS"
    echo "NB_FAILURES    = $NB_FAILURES"

    if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
    if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
    if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi

fi

if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
    if [ -d $ARCHIVES_LOC ]
    then
        rm -Rf $ARCHIVES_LOC
    fi
    mkdir --parents $ARCHIVES_LOC

    EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
    LTEBOX=0
    if [ -d /opt/ltebox-archives/ ]
    then
        # Checking if all ltebox archives are available to run ltebx epc on a brand new VM
        if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim.zip ]
        then
            echo "############################################################"
            echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
            echo "############################################################"
            LTEBOX=1
        fi
    fi
    # Here we could have other types of EPC detection

    # Do we need to start the EPC VM
    EPC_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#epc-cmds#"`
    echo "EPC_VM_CMD_FILE     = $EPC_VM_CMDS"
    IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $EPC_VM_NAME`
    if [ $IS_EPC_VM_ALIVE -eq 0 ]
    then
        echo "############################################################"
        echo "Creating test EPC VM ($EPC_VM_NAME) on Ubuntu Cloud Image base"
        echo "############################################################"
        uvt-kvm create $EPC_VM_NAME release=xenial --unsafe-caching
    fi

    uvt-kvm wait $EPC_VM_NAME --insecure
    EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
    echo "$EPC_VM_NAME has for IP addr = $EPC_VM_IP_ADDR"
    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu

    # ltebox specific actions (install and start)
    LTE_BOX_TO_INSTALL=1
    if [ $LTEBOX -eq 1 ]
    then
        echo "ls -ls /opt/ltebox/tools/start_ltebox" > $EPC_VM_CMDS
        RESPONSE=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
        NB_EXES=`echo $RESPONSE | grep -c ltebox`
        if [ $NB_EXES -eq 1 ]; then LTE_BOX_TO_INSTALL=0; fi
    fi

    if [ $LTEBOX -eq 1 ] && [ $LTE_BOX_TO_INSTALL -eq 1 ]
    then
        echo "############################################################"
        echo "Copying ltebox archives into EPC VM ($EPC_VM_NAME)" 
        echo "############################################################"
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu

        echo "############################################################"
        echo "Install EPC on EPC VM ($EPC_VM_NAME)"
        echo "############################################################"
        echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $EPC_VM_CMDS
        echo "touch /home/ubuntu/.hushlogin" >> $EPC_VM_CMDS
        echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $EPC_VM_CMDS
        echo "sudo apt-get update > zip-install.txt 2>&1" >> $EPC_VM_CMDS
        echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $EPC_VM_CMDS

        # Installing HSS
        echo "echo \"cd /opt\"" >> $EPC_VM_CMDS
        echo "cd /opt" >> $EPC_VM_CMDS
        echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim.zip\"" >> $EPC_VM_CMDS
        echo "sudo unzip -qq /home/ubuntu/hss-sim.zip" >> $EPC_VM_CMDS
        echo "echo \"cd /opt/hss_sim0609\"" >> $EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $EPC_VM_CMDS

        # Installing ltebox
        echo "echo \"cd /home/ubuntu\"" >> $EPC_VM_CMDS
        echo "cd /home/ubuntu" >> $EPC_VM_CMDS
        echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $EPC_VM_CMDS
        echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $EPC_VM_CMDS

        echo "echo \"cd /opt/ltebox/etc/\"" >> $EPC_VM_CMDS
        echo "cd /opt/ltebox/etc/" >> $EPC_VM_CMDS
        echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $EPC_VM_CMDS
        echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' gw.conf" >> $EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' mme.conf" >> $EPC_VM_CMDS
    fi

    # Starting EPC
    if [ $LTEBOX -eq 1 ]
    then
        echo "############################################################"
        echo "Start EPC on EPC VM ($EPC_VM_NAME)"
        echo "############################################################"
        echo "echo \"cd /opt/hss_sim0609\"" >> $EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $EPC_VM_CMDS
        echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $EPC_VM_CMDS
        echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $EPC_VM_CMDS

        echo "echo \"cd /opt/ltebox/tools/\"" >> $EPC_VM_CMDS
        echo "cd /opt/ltebox/tools/" >> $EPC_VM_CMDS
        echo "echo \"sudo ./start_ltebox\"" >> $EPC_VM_CMDS
        echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $EPC_VM_CMDS

        ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
        rm -f $EPC_VM_CMDS

        # We may have some adaptation to do
        if [ -f /opt/ltebox-archives/adapt_ue_sim.txt ]
        then
            echo "############################################################"
            echo "Doing some adaptation on UE side"
            echo "############################################################"
            ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < /opt/ltebox-archives/adapt_ue_sim.txt
        fi

        i="0"
        echo "ifconfig tun5 | egrep -c \"inet addr\"" > $EPC_VM_CMDS
        while [ $i -lt 10 ]
        do
            sleep 2
            CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
            if [ $CONNECTED -eq 1 ]
            then
                i="100"
            else
                i=$[$i+1]
            fi
        done
        rm $EPC_VM_CMDS
        if [ $i -lt 50 ]
        then
            echo "Problem w/ starting ltebox EPC"
            exit -1
        fi
    fi

    # HERE ADD ANY INSTALL ACTIONS FOR ANOTHER EPC

    # Retrieve EPC real IP address
    if [ $LTEBOX -eq 1 ]
    then
        # in our configuration file, we are using pool 5
        echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $EPC_VM_CMDS
        REAL_EPC_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
        echo "EPC IP Address     is : $REAL_EPC_IP_ADDR"
        rm $EPC_VM_CMDS
    fi

    echo "############################################################"
    echo "Starting the eNB"
    echo "############################################################"
    echo "cd /home/ubuntu/tmp" > $VM_CMDS
    echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $VM_CMDS
    echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $VM_CMDS
    echo "echo \"export ENODEB=1\"" >> $VM_CMDS
    echo "export ENODEB=1" >> $VM_CMDS
    echo "echo \"source oaienv\"" >> $VM_CMDS
    echo "source oaienv" >> $VM_CMDS
    echo "cd ci-scripts/conf_files/" >> $VM_CMDS
    echo "cp lte-basic-sim.conf ci-lte-basic-sim.conf" >> $VM_CMDS
    echo "sed -i -e 's#CI_MME_IP_ADDR#$EPC_VM_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$VM_IP_ADDR#' ci-lte-basic-sim.conf" >> $VM_CMDS
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $VM_CMDS
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $VM_CMDS
    echo "echo \"./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf\" > ./my-lte-softmodem-run.sh " >> $VM_CMDS
    echo "chmod 775 ./my-lte-softmodem-run.sh" >> $VM_CMDS
    echo "cat ./my-lte-softmodem-run.sh" >> $VM_CMDS
    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/enb.log ./my-lte-softmodem-run.sh" >> $VM_CMDS

    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS

    echo "############################################################"
    echo "Starting the UE"
    echo "############################################################"
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $VM_CMDS
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $VM_CMDS
    echo "echo \"./lte-uesoftmodem -C 2680000000 -r 25 --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
    echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
    echo "cat ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/ue.log ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS

    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
    rm $VM_CMDS
    i="0"
    echo "ifconfig oip1 | egrep -c \"inet addr\"" > $VM_CMDS
    while [ $i -lt 40 ]
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS`
        if [ $CONNECTED -eq 1 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $VM_CMDS
    if [ $i -lt 50 ]
    then
        echo "Problem w/ eNB and UE not syncing"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/enb.log $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/ue.log $ARCHIVES_LOC
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
        exit -1
    fi
    echo "ifconfig oip1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $VM_CMDS
    UE_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS`
    echo "UE IP Address for EPC is : $UE_IP_ADDR"
    rm $VM_CMDS

    echo "############################################################"
    echo "Pinging the UE"
    echo "############################################################"
    echo "echo \"ping -c 20 $UE_IP_ADDR\"" > $EPC_VM_CMDS
    echo "echo \"COMMAND IS: ping -c 20 $UE_IP_ADDR\" > ping_ue.txt" > $EPC_VM_CMDS
    echo "ping -c 20 $UE_IP_ADDR | tee -a ping_ue.txt" >> $EPC_VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
    rm -f $EPC_VM_CMDS
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/ping_ue.txt $ARCHIVES_LOC

    echo "############################################################"
    echo "Iperf DL"
    echo "############################################################"
    echo "echo \"iperf -u -s -i 1\"" > $VM_CMDS
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > tmp/cmake_targets/log/iperf_dl_server.txt" > $VM_CMDS
    echo "nohup iperf -u -s -i 1 >> tmp/cmake_targets/log/iperf_dl_server.txt &" >> $VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
    rm $VM_CMDS

    echo "echo \"iperf -c $UE_IP_ADDR -u -t 30 -b 15M -i 1\"" > $EPC_VM_CMDS
    echo "echo \"COMMAND IS: iperf -c $UE_IP_ADDR -u -t 30 -b 15M -i 1\" > iperf_dl_client.txt" > $EPC_VM_CMDS
    echo "iperf -c $UE_IP_ADDR -u -t 30 -b 15M -i 1 | tee -a iperf_dl_client.txt" >> $EPC_VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
    rm -f $EPC_VM_CMDS

    echo "killall --signal SIGKILL iperf" >> $VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
    rm $VM_CMDS
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/iperf_dl_client.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/iperf_dl_server.txt $ARCHIVES_LOC

    echo "############################################################"
    echo "Iperf UL"
    echo "############################################################"
    echo "echo \"iperf -u -s -i 1\"" > $EPC_VM_CMDS
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > iperf_ul_server.txt" > $EPC_VM_CMDS
    echo "nohup iperf -u -s -i 1 >> iperf_ul_server.txt &" >> $EPC_VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
    rm $EPC_VM_CMDS

    echo "echo \"iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b 4M -i 1\"" > $VM_CMDS
    echo "echo \"COMMAND IS: iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b 4M -i 1\" > /home/ubuntu/tmp/cmake_targets/log/iperf_ul_client.txt" > $VM_CMDS
    echo "iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b 4M -i 1 | tee -a /home/ubuntu/tmp/cmake_targets/log/iperf_ul_client.txt" >> $VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
    rm -f $VM_CMDS

    echo "killall --signal SIGKILL iperf" >> $EPC_VM_CMDS
    ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
    rm $EPC_VM_CMDS
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/iperf_ul_server.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/iperf_ul_client.txt $ARCHIVES_LOC

    echo "############################################################"
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/enb.log $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/ue.log $ARCHIVES_LOC

    echo "############################################################"
    echo "Terminate EPC"
    echo "############################################################"

    if [ $LTEBOX -eq 1 ]
    then
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
    fi

    echo "############################################################"
    echo "Checking run status"
    echo "############################################################"

    # checking ping result
    if [ -f $ARCHIVES_LOC/ping_ue.txt ]
    then
        FILE_COMPLETE=`egrep -c "ping statistics" $ARCHIVES_LOC/ping_ue.txt`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            STATUS=-1
        else
            ALL_PACKET_RECEIVED=`egrep -c "20 received" $ARCHIVES_LOC/ping_ue.txt`
            if [ $ALL_PACKET_RECEIVED -eq 1 ]
            then
                echo "got all ping packets"
            else
                STATUS=-1
            fi
        fi
    else
        STATUS=-1
    fi

    # checking dl iperf result
    if [ -f $ARCHIVES_LOC/iperf_dl_client.txt ]
    then
        FILE_COMPLETE=`egrep -c "Server Report" $ARCHIVES_LOC/iperf_dl_client.txt`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            STATUS=-1
        else
            EFFECTIVE_BANDWIDTH=`tail -n3 $ARCHIVES_LOC/iperf_dl_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
            if [[ $EFFECTIVE_BANDWIDTH =~ .*15.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*14.*Mbits.* ]]
            then
                echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
            else
                STATUS=-1
            fi
        fi
    else
        STATUS=-1
    fi

    # checking ul iperf result
    if [ -f $ARCHIVES_LOC/iperf_ul_client.txt ]
    then
        FILE_COMPLETE=`egrep -c "Server Report" $ARCHIVES_LOC/iperf_ul_client.txt`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            STATUS=-1
        else
            EFFECTIVE_BANDWIDTH=`tail -n3 $ARCHIVES_LOC/iperf_ul_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
            if [[ $EFFECTIVE_BANDWIDTH =~ .*4.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*3.*Mbits.* ]]
            then
                echo "got requested UL bandwidth: $EFFECTIVE_BANDWIDTH"
            else
                STATUS=-1
            fi
        fi
    else
        STATUS=-1
    fi
fi

if [ $STATUS -eq 0 ]
then
    echo "STATUS seems OK"
else
    echo "STATUS failed?"
fi

exit $STATUS