Add 100 MHz 2x2 phytest-timing test

ci-scripts/conf_files/gnb.band78.273prb.usrpn300.phytest-dora.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP = 2;
+    pusch_AntennaPorts = 2;
+    min_rxtxtime = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 621312;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 620040;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 273;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=41,L=24 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 31624;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 273;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 31624;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES : {
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+MACRLCs = ({
+  num_cc = 1;
+  tr_s_preference = "local_L1";
+  tr_n_preference = "local_RRC";
+});
+
+L1s = ({
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+});
+
+RUs = ({
+  local_rf       = "yes"
+  nb_tx          = 2
+  nb_rx          = 2
+  att_tx         = 0
+  att_rx         = 0;
+  bands          = [7];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 50;
+  eNB_instances  = [0];
+  bf_weights = [0x00007fff, 0x0000];
+  sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
+});
+
+THREAD_STRUCT = ({
+  #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+  parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+  #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+  worker_config      = "WORKER_ENABLE";
+});
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config : {
+  global_log_level = "info";
+  hw_log_level     = "info";
+  phy_log_level    = "info";
+  mac_log_level    = "info";
+  rlc_log_level    = "info";
+  pdcp_log_level   = "info";
+  rrc_log_level    = "info";
+};

ci-scripts/datalog_rt_stats.100.2x2.yaml

+#this is a configuration file
+#used to build real time processing statistics 
+#for 5G NR phy test (gNB terminate)
+Title : Processing Time (us)
+ColNames :
+  - Metric
+  - Average; Max; Count
+  - Average vs Reference Deviation (Reference Value; Acceptability Deviation Threshold)
+Ref : 
+  feprx : 150.0
+  feptx_prec : 0.0
+  feptx_ofdm : 65.0
+  feptx_total : 177.0
+  L1 Tx processing : 560.0
+  DLSCH encoding : 179.0
+  L1 Rx processing : 526.0
+  PUSCH inner-receiver : 400.0
+  PUSCH decoding : 2000.0
+  Schedule Response : 1.0
+  DL & UL scheduling timing : 15.0
+  UL Indication : 1.0
+  Slot Indication : 17.0
+DeviationThreshold :
+  feprx : 0.25
+  feptx_prec : 0.25
+  feptx_ofdm : 0.25
+  feptx_total : 0.25
+  L1 Tx processing : 0.25
+  DLSCH encoding : 0.25
+  L1 Rx processing : 0.25
+  PUSCH inner-receiver : 0.25
+  PUSCH decoding : 0.25
+  Schedule Response : 0.25
+  DL & UL scheduling timing : 0.25
+  UL Indication : 0.25
+  Slot Indication : 0.25

ci-scripts/xml_files/gnb_phytest_usrp_run_100_2x2.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+  <htmlTabRef>gNB-PHY-Test-100-2x2</htmlTabRef>
+  <htmlTabName>Timing phytest 100 MHz 2x2</htmlTabName>
+  <htmlTabIcon>tasks</htmlTabIcon>
+  <repeatCount>1</repeatCount>
+  <TestCaseRequestedList>
+100000 390101 000001 390109 200000
+  </TestCaseRequestedList>
+  <TestCaseExclusionList></TestCaseExclusionList>
+  <testCase id="100000">
+	  <class>Custom_Command</class>
+	  <desc>Disable Sleep States</desc>
+	  <node>caracal</node>
+	  <command>sudo cpupower idle-set -D 0</command>
+  </testCase>
+  <testCase id="200000">
+	  <class>Custom_Command</class>
+	  <desc>Enable Sleep States</desc>
+	  <node>caracal</node>
+	  <command>sudo cpupower idle-set -E</command>
+  </testCase>
+
+  <testCase id="390101">
+    <class>Initialize_eNB</class>
+    <desc>Initialize gNB USRP</desc>
+    <Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.273prb.usrpn300.phytest-dora.conf --phy-test -q -U 787200 -T 273 -t 23 -D 130175 -m 23 -M 273 -l 2 --usrp-tx-thread-config 1 --log_config.global_log_options level,nocolor,time</Initialize_eNB_args>
+    <rt_stats_cfg>datalog_rt_stats.100.2x2.yaml</rt_stats_cfg>
+    <air_interface>NR</air_interface>
+    <USRP_IPAddress>192.168.20.2</USRP_IPAddress>
+		<cmd_prefix>numactl --cpunodebind=netdev:enp94s0f0np0 --membind=netdev:enp94s0f0np0</cmd_prefix>
+  </testCase>
+
+  <testCase id="000001">
+    <class>IdleSleep</class>
+    <desc>Sleep</desc>
+    <idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
+  </testCase>
+
+
+  <testCase id="390109">
+    <class>Terminate_eNB</class>
+    <desc>Terminate gNB</desc>
+    <air_interface>NR</air_interface>
+  </testCase>
+
+</testCaseList>