Reset all the circular buffer to zero; this ensures that we cannot read
uninitialized data. Since this is RFsimulator, performance is not a
problem here either (and zeroing out happens only once).

Memsan complains that uninitialized reads originate because of these
warnings. Most of the corresponding variables are actually read into
through by libconfig; nevertheless, initializing them should not have a
bad side-effect (because the initialized value is overwritten).

Fix clang warning

  warning: use of GNU old-style field designator extension [-Wgnu-designator]

We access G_N at indexes that are not necessarily 32-byte aligned,
leading to segfaults. Use simde_mm256_loadu_si256() to load from memory
at an unaligned memory address to avoid the segfault.

Discovered using clang; it is unclear why gcc did not encounter the same
segfault.

-rdynamic is necessary for clang as well to properly link shared
executables. Add furthermore an option to ignore unused command line
arguments, to suppress warning

  clang: warning: argument unused during compilation: '-rdynamic' [-Wunused-command-line-argument]

This is likely because -rdynamic is only relevant for the linker, but
the corresponding option add_link_options() is only available starting
cmake 3.13, while we are still at 3.12 (for Ubuntu 18, to my
understanding).

Integration `2024.w15`

Closes #727, #765, #776

See merge request oai/openairinterface5g!2676

* !2561 CI - add T2 tests to timing pipeline
* !2620 Fix cppcheck errors
* !2624 NR UE MAC SR improvements
* !2647 NR UE mixed fixes
* !2671 Reduce stack memory size for layer mapping
* !2669 CI: create SA 2x2 pipeline
* !2660 fix for 3072 fft size when using 80 MHz and -E
* !2539 CI: Add channel emulation in one test
* !2635 SCTP problems: allow to bind separate F1-C/F1-U interfaces; allow to use DNS
* !2438 PSBCH RX,TX and SLSS SEARCH procedures
* !2675 (doc): Update benetel firmware version and configuration files
* Update of O-RAN 7.2 gNB configuration file for Benetel 650

Unlike the previous commit, in noS1, we cannot use Attach(), as noS1
automatically brings up an interface, no matter whether the connection
succeeded or not. Therefore, consistently wait a bit longer to increase
the chance that the radio is really up.

For various reasons, the UE might take longer to connect to the eNB. A
simple sleep might not be enough; instead, use Attach() to actively wait
that the UE gets an IP address. The added bonus of this function is that
it will also stop&restart a UE if it did not attach, i.e., it will try
multiple times to attach the UE.

The code (author) confused MCE_PARAMS_DESC and MCE_NETPARAMS_DESC and
tried to read the MCE name from MCE_NETPARAMS_DESC when in reality it
should come from MCE_PARAMS_DESC. This commit fixes to use the right
array.

Same reasoning as in previous commit.

Same reasoning as in the previous commit.

Some reasoning as in previous commit.

Same reasoning as in the previous commit.

Remove filling of broadcast_plmn, which does not exist in the
configuration.

In a previous commit, the functionality of handling IPv6 (and DNS names)
as part of the IPv4 was introduced (in IPv4 field for backwards
compatibility). This commit now removes superfluous configuration
fields:
- IPv6:  handled by IPv4 field
- active: users can just remove an entry
- preference: not needed

- Update the configuration for benetel 650 and 550 for new firmware version
- Remove the old firmware configuration file and description in the document
- Add a new RU configuration section
- Add How to get support from the OAI Community to clarify the support procedure.

Include "best practices" on how to ask questions.

Rewrite sctp_create_new_listener() to use getaddrinfo() to look up
IPv4/IPv6 addresses via a common interface. This allows to use e.g. DNS,
and enables the SCTP library to listen on IPv6 ports.

To support the above, the corresponding message is changed to not take
an IPv4 address on 4 bytes (and separate IPv6), but a single name that
will be resolved via getaddrinfo()

The previous init message used to allow multiple IPv4/IPv6 addresses;
since this is not used anywhere, remove the corresponding functionality.

Modify all uses of this ITTI message to copy te SCTP init bind addr into
ITTI message.

Use getaddrinfo() to look up IP (v4/v6) addresses. The old
interface of separately specifying IPv4 and IPv6 addresses is
preserved, but both fields allow to specify types of addresses, and we
will remove one field in the future.

After the last commit, it is not possible to bind on separate interfaces
for F1-C and F1-U. In other words, it is for instance not possible to
have the F1-C on one subnet on one physical interface, and F1-U on
another subnet on another physical interface. This commit introduces a
second option MACRLCs.[0].local_n_address_f1u to allow to bind F1-U on
an alternative address; if it is not specified, the interface of F1-C is
reused.

The above only works for the DU; no corresponding option exists for the
CU. For the CU, use separate CU-CP and CU-UP.

Use it in the CI.

This reverts commit 28411652.

The problem is that (1) we don't really support multi-homing, but (2) on
some system, if the other IP addresses that the operating system
considers part of the multi-homed connection are HEARTBEAT'ed (e.g.,
docker), they answer with SCTP ABORT, which breaks the entire
connection.

In other words, force single-homing by binding. For F1-U uses, another
option will be introduced that allows to bind to a separate interface
for F1-U (separate from F1-C), if necessary.

Closes #727