Integration: `2024.w21b`

Closes #734

See merge request oai/openairinterface5g!2755

* !2700 Fix UE PUCCH multiplexing infinite loop
* !2724 Correct PRACH preamble tx power calculation.
* !2726 NR SA Tutorials
* !2728 Use existing function for bits reversal
* !2732 CU handle F1 setup Req- TAC conversion
* !2738 Correct data offset for unscrambling in PUSCH processing
* !2742 UE: fix mutex locking verification
* !2737 rename persisted ul harq status per pid with a uniq name, make better mutual exclision of processSlotTX()

This reverts commit 0d0e1111.  It was
set to UE RX to TX time to 2 as it was deemed that the UE could sustain
this time. However, we noticed a degradation of performance, so reset
the RX to TX time to something higher to ensure proper performance.

This reverts commit 31b4f48e.

Integration: `2024.w21`

See merge request oai/openairinterface5g!2746

* !2717 Additional check on pucch_Config and srs_Config
* !2730 Fix for SSB index in function get_nr_prach_info_from_ssb_index
* !2734 add a function to reset the transmission timestamps chain
* !2741 Fix several potential segfaults in UE PUCCH tx power determination.

Correctly compute the offset of data to unscramble in PUSCH processing
at the gNB. Rename variables to make them easier to spot (instead of
"s"), and remove a global variable.

Closes: #734

Tutorials: Rename OAI CN5G docker network interface name from 'demo-oai' to 'oai-cn5g' and remove commented lines

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

fix a error that was created by over complexity in setting a pointer to null for a wrong later assert verification

rename persisted ul harq status per pid with a uniq name as this variable is persisted in memory and accessed by multiple threads, a uniq name helps to debug

uper_encode_to_buffer() of asn1c returns the number of BITS that have
been encoded; if we use this, we need to calculate the resulting number
of bytes (rounding up) to get the right buffer size.

Note that do_NR_ULInformationTransfer() uses
uper_encode_to_new_buffer() which returns the number of BYTES, hence, in
this similar function, we should not modify the return value.

-Corrected the conversion function used in CU_handle_F1_SETUP_REQUEST

-Corrected the conversion function in CU_handle_gNB_DU_CONFIGURATION_UPDATE

add a function to reset the transmission timestamps chain, and use it in context of UE resynchronization

Removed arbitrary offset of 30dB.
Changed sign for pathloss: pathloss calculated in compute_nr_SSB_PL is the difference between transmitted and received power.
Transmission power for preamble should compensate the pathloss, therefore power should increase with pathloss.

Integration `2024.w18`

See merge request oai/openairinterface5g!2713

* !2705 Fix CRC check in UE DCI detection
* !2708 Adding few more NR bands to the list of supported ones
* !2701 gNB archi fixes
* !2203 DL-MMSE
* !2684 remove asserts on min RX/TX, set the RX/TX shift as 2 in the UE
* !2594 F1AP refactoring to align with O-RAN.WG5.C.1-v11

Taking the example of the AMF Set ID, the previous version of the macro
used another macro to encode the number, then marked the last 6 bits in
the bit string (of length 16/2 bytes) as unused. This is wrong, because,
assuming AMF Set ID=3, it basically truncates the number by encoding all
16 bits and cutting off the last 6, like this:

  ------------------- encode 16 bits
  0000 0000 0000 0011
  ------------        take these 10 bits

So what remains is these bit positions of the number:
(16,15,14,13,12,11,10,9,8,7) -- the last 6 bits are cut (and the first 6
are either 0 or garbage, because they don't exist).

Instead, manually encode bits (10,9,8,7,6,5,4,3) in the first byte, and
(2,1) in the second byte of the bit string, like so:

  ------------        encode 10 bits
  0000 0000 1100 0000
  ------------        take these 10 bits

Do the same with the pointer.

The AMF Region ID above is correct, as it is exactly 8 bits.

We can optionally indicate the PDU session IDs. At least with OAI 5GC,
that should help it clean up.

In the case of PDU sessions in the NG UE context setup request, we first
have to set up security. Hence, in this commit, implement the "delayed"
set up of theses PDU sessions, and acknowledge the setup request after
reconfiguration, as requested by O-RAN.WG5.C.1-v11.