usrp_lib.cpp 50.7 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

Raymond Knopp's avatar
 
Raymond Knopp committed
22 23
/** usrp_lib.cpp
 *
24
 * \author: HongliangXU : hong-liang-xu@agilent.com
Raymond Knopp's avatar
 
Raymond Knopp committed
25 26 27 28 29 30 31 32
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
33
#include <uhd/version.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
34 35
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
36 37
#include <boost/thread.hpp>
#include <boost/format.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
38 39 40 41
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
42
#include <time.h>
43
#include "common/utils/LOG/log.h"
Raymond Knopp's avatar
 
Raymond Knopp committed
44
#include "common_lib.h"
laurent's avatar
laurent committed
45
#include "assertions.h"
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
46 47
#include <sys/sysinfo.h>
#include <sys/resource.h>
laurent's avatar
laurent committed
48

49 50 51
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
laurent's avatar
laurent committed
52

53 54 55
#ifdef __AVX2__
#  include <immintrin.h>
#endif
56

57 58 59 60
#ifdef __arm__
#  include <arm_neon.h>
#endif

61 62 63 64
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

laurent's avatar
laurent committed
65 66
/*! \brief USRP Configuration */
typedef struct {
Raymond Knopp's avatar
 
Raymond Knopp committed
67

68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
  //! USRP device pointer
  uhd::usrp::multi_usrp::sptr usrp;

  //create a send streamer and a receive streamer
  //! USRP TX Stream
  uhd::tx_streamer::sptr tx_stream;
  //! USRP RX Stream
  uhd::rx_streamer::sptr rx_stream;

  //! USRP TX Metadata
  uhd::tx_metadata_t tx_md;
  //! USRP RX Metadata
  uhd::rx_metadata_t rx_md;

  //! Sampling rate
  double sample_rate;

  //! TX forward samples. We use usrp_time_offset to get this value
  int tx_forward_nsamps; //166 for 20Mhz

  // --------------------------------
  // Debug and output control
  // --------------------------------
  int num_underflows;
  int num_overflows;
  int num_seq_errors;
  int64_t tx_count;
  int64_t rx_count;
  int wait_for_first_pps;
  int use_gps;
  //! timestamp of RX packet
  openair0_timestamp rx_timestamp;
Raymond Knopp's avatar
 
Raymond Knopp committed
103

laurent's avatar
laurent committed
104
} usrp_state_t;
Raymond Knopp's avatar
 
Raymond Knopp committed
105

Florian Kaltenberger's avatar
Florian Kaltenberger committed
106 107
//void print_notes(void)
//{
108 109 110 111 112 113
// Helpful notes
//  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
//  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
//  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
//  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
//  std::cout << boost::format("****************************************************************************************************************\n");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
114 115
//}

116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166
static int sync_to_gps(openair0_device *device) {
  uhd::set_thread_priority_safe();
  //std::string args;
  //Set up program options
  //po::options_description desc("Allowed options");
  //desc.add_options()
  //("help", "help message")
  //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
  //;
  //po::variables_map vm;
  //po::store(po::parse_command_line(argc, argv, desc), vm);
  //po::notify(vm);
  //Print the help message
  //if (vm.count("help"))
  //{
  //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
  // return EXIT_FAILURE;
  //}
  //Create a USRP device
  //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
  //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
  //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
  usrp_state_t *s = (usrp_state_t *)device->priv;

  try {
    size_t num_mboards = s->usrp->get_num_mboards();
    size_t num_gps_locked = 0;

    for (size_t mboard = 0; mboard < num_mboards; mboard++) {
      std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;
      //Set references to GPSDO
      s->usrp->set_clock_source("gpsdo", mboard);
      s->usrp->set_time_source("gpsdo", mboard);
      //std::cout << std::endl;
      //print_notes();
      //std::cout << std::endl;
      //Check for 10 MHz lock
      std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);

      if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end()) {
        std::cout << "Waiting for reference lock..." << std::flush;
        bool ref_locked = false;

        for (int i = 0; i < 30 and not ref_locked; i++) {
          ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();

          if (not ref_locked) {
            std::cout << "." << std::flush;
            boost::this_thread::sleep(boost::posix_time::seconds(1));
          }
        }
Raymond Knopp's avatar
 
Raymond Knopp committed
167

168 169 170 171 172 173
        if(ref_locked) {
          std::cout << "LOCKED" << std::endl;
        } else {
          std::cout << "FAILED" << std::endl;
          std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
          exit(EXIT_FAILURE);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
174
        }
175 176 177
      } else {
        std::cout << boost::format("ref_locked sensor not present on this board.\n");
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
178

179 180
      //Wait for GPS lock
      bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
Florian Kaltenberger's avatar
Florian Kaltenberger committed
181

182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206
      if(gps_locked) {
        num_gps_locked++;
        std::cout << boost::format("GPS Locked\n");
      } else {
        std::cerr << "WARNING:  GPS not locked - time will not be accurate until locked" << std::endl;
      }

      //Set to GPS time
      uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
      s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));
      //Wait for it to apply
      //The wait is 2 seconds because N-Series has a known issue where
      //the time at the last PPS does not properly update at the PPS edge
      //when the time is actually set.
      boost::this_thread::sleep(boost::posix_time::seconds(2));
      //Check times
      gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
      std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
      std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
      //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
      //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
      //else
      //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
207
    }
208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240

    if (num_gps_locked == num_mboards and num_mboards > 1) {
      //Check to see if all USRP times are aligned
      //First, wait for PPS.
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();

      while (time_last_pps == s->usrp->get_time_last_pps()) {
        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
      }

      //Sleep a little to make sure all devices have seen a PPS edge
      boost::this_thread::sleep(boost::posix_time::milliseconds(200));
      //Compare times across all mboards
      bool all_matched = true;
      uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);

      for (size_t mboard = 1; mboard < num_mboards; mboard++) {
        uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);

        if (mboard_time != mboard0_time) {
          all_matched = false;
          std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                        % mboard0_time.get_real_secs()
                        % mboard
                        % mboard_time.get_real_secs()) << std::endl;
        }
      }

      if (all_matched) {
        std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
      } else {
        std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
241
    }
242 243 244 245 246 247 248 249 250
  } catch (std::exception &e) {
    std::cout << boost::format("\nError: %s") % e.what();
    std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
    std::cout << boost::format("Visit one of these pages if the problem persists:\n");
    std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
    std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
    std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
    exit(EXIT_FAILURE);
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
251

252
  return EXIT_SUCCESS;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
253
}
Raymond Knopp's avatar
 
Raymond Knopp committed
254

255 256 257 258
#if defined(USRP_REC_PLAY)
#include "usrp_lib.h"
static FILE    *pFile = NULL;
int             mmapfd = 0;
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
259 260
int             iqfd = 0;
int             use_mmap = 1; // default is to use mmap
261 262 263 264 265 266 267 268 269
struct stat     sb;
iqrec_t        *ms_sample = NULL;                      // memory for all subframes
unsigned int    nb_samples = 0;
unsigned int    cur_samples = 0;
int64_t         wrap_count = 0;
int64_t         wrap_ts = 0;
unsigned int    u_sf_mode = 0;                         // 1=record, 2=replay
unsigned int    u_sf_record = 0;                       // record mode
unsigned int    u_sf_replay = 0;                       // replay mode
bruno mongazon's avatar
bruno mongazon committed
270
char            u_sf_filename[1024] = "";              // subframes file path
271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293
unsigned int    u_sf_max = DEF_NB_SF;                  // max number of recorded subframes
unsigned int    u_sf_loops = DEF_SF_NB_LOOP;           // number of loops in replay mode
unsigned int    u_sf_read_delay = DEF_SF_DELAY_READ;   // read delay in replay mode
unsigned int    u_sf_write_delay = DEF_SF_DELAY_WRITE; // write delay in replay mode

char config_opt_sf_file[] = CONFIG_OPT_SF_FILE;
char config_def_sf_file[] = DEF_SF_FILE;
char config_hlp_sf_file[] = CONFIG_HLP_SF_FILE;
char config_opt_sf_rec[] = CONFIG_OPT_SF_REC;
char config_hlp_sf_rec[] = CONFIG_HLP_SF_REC;
char config_opt_sf_rep[] = CONFIG_OPT_SF_REP;
char config_hlp_sf_rep[] = CONFIG_HLP_SF_REP;
char config_opt_sf_max[] = CONFIG_OPT_SF_MAX;
char config_hlp_sf_max[] = CONFIG_HLP_SF_MAX;
char config_opt_sf_loops[] = CONFIG_OPT_SF_LOOPS;
char config_hlp_sf_loops[] = CONFIG_HLP_SF_LOOPS;
char config_opt_sf_rdelay[] = CONFIG_OPT_SF_RDELAY;
char config_hlp_sf_rdelay[] = CONFIG_HLP_SF_RDELAY;
char config_opt_sf_wdelay[] = CONFIG_OPT_SF_WDELAY;
char config_hlp_sf_wdelay[] = CONFIG_HLP_SF_WDELAY;

#endif

294 295 296
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
laurent's avatar
laurent committed
297
static int trx_usrp_start(openair0_device *device) {
298
#if defined(USRP_REC_PLAY)
299

300 301 302 303 304
  if (u_sf_mode != 2) { // not replay mode
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    // setup GPIO for TDD, GPIO(4) = ATR_RX
    //set data direction register (DDR) to output
305
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
306
    //set control register to ATR
307
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
308
    //set ATR register
309
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);
laurent's avatar
laurent committed
310 311
    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
312 313
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
314 315 316

    if (s->use_gps == 1) {
      s->wait_for_first_pps = 1;
317 318 319
      cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);
    } else {
      s->wait_for_first_pps = 0;
320 321 322
      cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    }

laurent's avatar
laurent committed
323
    cmd.stream_now = false; // start at constant delay
laurent's avatar
laurent committed
324 325 326 327 328 329 330 331
    s->rx_stream->issue_stream_cmd(cmd);
    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
332
#if defined(USRP_REC_PLAY)
333 334 335 336
  }

#endif
  return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
337
}
laurent's avatar
laurent committed
338
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
339 340
 * \param device the hardware to use
 */
laurent's avatar
laurent committed
341
static void trx_usrp_end(openair0_device *device) {
342 343
#if defined(USRP_REC_PLAY) // For some ugly reason, this can be called several times...
  static int done = 0;
344

345
  if (done == 1) return;
346

347
  done = 1;
Raymond Knopp's avatar
 
Raymond Knopp committed
348

349 350 351
  if (u_sf_mode != 2) { // not subframes replay
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
laurent's avatar
laurent committed
352 353 354 355 356
    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;
357
    sleep(1);
358
#if defined(USRP_REC_PLAY)
359 360
  }

361 362
#endif
#if defined(USRP_REC_PLAY)
363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380

  if (u_sf_mode == 1) { // subframes store
    pFile = fopen (u_sf_filename,"wb+");

    if (pFile == NULL) {
      std::cerr << "Cannot open " << u_sf_filename << std::endl;
    } else {
      unsigned int i = 0;
      unsigned int modu = 0;

      if ((modu = nb_samples % 10) != 0) {
        nb_samples -= modu; // store entire number of frames
      }

      std::cerr << "Writing " << nb_samples << " subframes to " << u_sf_filename << " ..." << std::endl;

      for (i = 0; i < nb_samples; i++) {
        fwrite(ms_sample+i, sizeof(unsigned char), sizeof(iqrec_t), pFile);
381
      }
382 383 384

      fclose (pFile);
      std::cerr << "File " << u_sf_filename << " closed." << std::endl;
385
    }
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406
  }

  if (u_sf_mode == 1) { // record
    if (ms_sample != NULL) {
      free((void *)ms_sample);
      ms_sample = NULL;
    }
  }

  if (u_sf_mode == 2) { // replay
    if (use_mmap) {
      if (ms_sample != MAP_FAILED) {
        munmap(ms_sample, sb.st_size);
        ms_sample = NULL;
      }

      if (mmapfd != 0) {
        close(mmapfd);
        mmapfd = 0;
      }
    } else {
407
      if (ms_sample != NULL) {
408 409
        free(ms_sample);
        ms_sample = NULL;
410
      }
411 412 413 414

      if (iqfd != 0) {
        close(iqfd);
        iqfd = 0;
415 416
      }
    }
417 418 419
  }

#endif
Raymond Knopp's avatar
 
Raymond Knopp committed
420
}
421

422 423
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
424
      @param timestamp The timestamp at which the first sample MUST be sent
425 426
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
427
      @param antenna_id index of the antenna if the device has multiple antennas
428
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
laurent's avatar
laurent committed
429 430
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
431
  int ret=0;
432
#if defined(USRP_REC_PLAY)
433

434
  if (u_sf_mode != 2) { // not replay mode
435 436 437
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    int nsamps2;  // aligned to upper 32 or 16 byte boundary
438 439
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
440 441
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tx[2][nsamps2];
442
#else
443 444
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tx[2][nsamps2];
445 446
#endif
#elif defined(__arm__)
447 448
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tx[2][nsamps2];
449
#endif
450 451 452 453

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
454 455
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
456
        buff_tx[i][j] = _mm256_slli_epi16(((__m256i *)buff[i])[j],4);
457
#else
458
        buff_tx[i][j] = _mm_slli_epi16(((__m128i *)buff[i])[j],4);
459 460
#endif
#elif defined(__arm__)
461
        buff_tx[i][j] = vshlq_n_s16(((int16x8_t *)buff[i])[j],4);
462
#endif
463
      }
laurent's avatar
laurent committed
464 465
    }

466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506
    s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_md.has_time_spec = flags;

    if(flags>0)
      s->tx_md.has_time_spec = true;
    else
      s->tx_md.has_time_spec = false;

    if (flags == 2) { // start of burst
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = false;
    } else if (flags == 3) { // end of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    } else if (flags == 4) { // start and end
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = true;
    } else if (flags==1) { // middle of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = false;
    }

    if(flags==10) { // fail safe mode
      s->tx_md.has_time_spec = false;
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    }

    if (cc>1) {
      std::vector<void *> buff_ptrs;

      for (int i=0; i<cc; i++)
        buff_ptrs.push_back(buff_tx[i]);

      ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
    } else
      ret = (int)s->tx_stream->send(buff_tx[0], nsamps, s->tx_md,1e-3);

    if (ret != nsamps)
      LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);

507 508 509 510 511 512 513 514
#if defined(USRP_REC_PLAY)
  } else {
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_write_delay * 1000;
    nanosleep(&req, NULL);
    ret = nsamps;
  }
515

516
#endif
517
  return ret;
Raymond Knopp's avatar
 
Raymond Knopp committed
518 519
}

520 521 522 523 524 525 526 527 528 529 530
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
laurent's avatar
laurent committed
531
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
532
  usrp_state_t *s = (usrp_state_t *)device->priv;
533 534 535
  int samples_received=0,i,j;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(USRP_REC_PLAY)
536

537
  if (u_sf_mode != 2) { // not replay mode
538
#endif
539 540
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
541 542
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
543
#else
laurent's avatar
laurent committed
544 545
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
546 547
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
548 549
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
550 551
#endif

laurent's avatar
laurent committed
552
    if (device->type == USRP_B200_DEV) {
553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;

        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received=0;

        while (samples_received != nsamps) {
          samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                 nsamps-samples_received, s->rx_md);

          if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
            break;

          if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) {
            printf("sleep...\n"); //usleep(100);
          }
laurent's avatar
laurent committed
574
        }
575 576 577 578 579 580 581

        if (samples_received == nsamps) s->wait_for_first_pps=0;
      }

      // bring RX data into 12 LSBs for softmodem RX
      for (int i=0; i<cc; i++) {
        for (int j=0; j<nsamps2; j++) {
582 583
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
584
          ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
585
#else
586
          ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
587 588
#endif
#elif defined(__arm__)
589
          ((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
590
#endif
laurent's avatar
laurent committed
591
        }
592
      }
laurent's avatar
laurent committed
593
    } else if (device->type == USRP_X300_DEV) {
594 595 596
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;
laurent's avatar
laurent committed
597

598 599 600 601 602 603 604
        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
      }
605
    }
606

laurent's avatar
laurent committed
607
    if (samples_received < nsamps)
608
      LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);
609

laurent's avatar
laurent committed
610
    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
611
      LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());
612

laurent's avatar
laurent committed
613 614 615
    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
616 617
#if defined (USRP_REC_PLAY)
  }
618 619

#endif
620
#if defined(USRP_REC_PLAY)
621

622 623 624
  if (u_sf_mode == 1) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (nb_samples < u_sf_max) {
625
      (ms_sample+nb_samples)->header = BELL_LABS_IQ_HEADER;
626 627 628 629 630 631 632 633
      (ms_sample+nb_samples)->ts = *ptimestamp;
      memcpy((ms_sample+nb_samples)->samples, buff[0], nsamps*4);
      nb_samples++;
    }
  } else if (u_sf_mode == 2) { // replay mode
    if (cur_samples == nb_samples) {
      cur_samples = 0;
      wrap_count++;
634

635
      if (wrap_count == u_sf_loops) {
636 637
        std::cerr << "USRP device terminating subframes replay mode after " << u_sf_loops << " loops." << std::endl;
        return 0; // should make calling process exit
638
      }
639

640
      wrap_ts = wrap_count * (nb_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000));
641

bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
642
      if (!use_mmap) {
643 644 645 646 647
        if (lseek(iqfd, 0, SEEK_SET) == 0) {
          std::cerr << "Seeking at the beginning of IQ file" << std::endl;
        } else {
          std::cerr << "Problem seeking at the beginning of IQ file" << std::endl;
        }
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
648
      }
649
    }
650

bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
651 652
    if (use_mmap) {
      if (cur_samples < nb_samples) {
653 654 655 656 657 658 659 660 661
        *ptimestamp = (ms_sample[0].ts + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000))) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample[cur_samples].samples[0], nsamps*4);
        cur_samples++;
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
662 663 664 665
      }
    } else {
      // read sample from file
      if (read(iqfd, ms_sample, sizeof(iqrec_t)) != sizeof(iqrec_t)) {
666 667 668 669 670 671
        std::cerr << "pb reading iqfile at index " << sizeof(iqrec_t)*cur_samples << std::endl;
        close(iqfd);
        free(ms_sample);
        ms_sample = NULL;
        iqfd = 0;
        exit(-1);
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
672 673 674
      }

      if (cur_samples < nb_samples) {
675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691
        static int64_t ts0 = 0;

        if ((cur_samples == 0) && (wrap_count == 0)) {
          ts0 = ms_sample->ts;
        }

        *ptimestamp = ts0 + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000)) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample->samples[0], nsamps*4);
        cur_samples++;
        // Prepare for next read
        off_t where = lseek(iqfd, cur_samples * sizeof(iqrec_t), SEEK_SET);
692 693
      }
    }
694

695
    struct timespec req;
696

697
    req.tv_sec = 0;
698

699
    req.tv_nsec = u_sf_read_delay * 1000;
700

701
    nanosleep(&req, NULL);
702

703 704
    return nsamps;
  }
705

706 707
#endif
  return samples_received;
Raymond Knopp's avatar
 
Raymond Knopp committed
708 709
}

710 711 712 713
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
laurent's avatar
laurent committed
714
static bool is_equal(double a, double b) {
715
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
Raymond Knopp's avatar
 
Raymond Knopp committed
716
}
Raymond Knopp's avatar
 
Raymond Knopp committed
717

718
void *freq_thread(void *arg) {
719 720 721 722
  openair0_device *device=(openair0_device *)arg;
  usrp_state_t *s = (usrp_state_t *)device->priv;
  s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
723 724
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
725 726 727
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
laurent's avatar
laurent committed
728
 * \returns 0 in success
729
 */
730 731 732 733 734 735 736 737 738 739 740 741
int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg, int dont_block) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  pthread_t f_thread;
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);

  // spawn a thread to handle the frequency change to not block the calling thread
  if (dont_block == 1)
    pthread_create(&f_thread,NULL,freq_thread,(void *)device);
  else {
    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
742

743
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
744 745
}

laurent's avatar
laurent committed
746
/*! \brief Set RX frequencies
747 748
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
749
 * \returns 0 in success
750
 */
751 752 753 754 755 756 757 758 759 760
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  static int first_call=1;
  static double rf_freq,diff;
  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
761 762
}

763 764 765
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
766
 * \returns 0 in success
767
 */
768
int trx_usrp_set_gains(openair0_device *device,
laurent's avatar
laurent committed
769
                       openair0_config_t *openair0_cfg) {
770 771 772 773 774 775 776 777 778 779 780
  usrp_state_t *s = (usrp_state_t *)device->priv;
  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
  s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);

  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
    exit(-1);
  }
laurent's avatar
laurent committed
781

782 783 784 785 786
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
  LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
        openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
        openair0_cfg[0].rx_gain[0],gain_range.stop());
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
787
}
788

789 790 791
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
792 793
int trx_usrp_stop(openair0_device *device) {
  return(0);
794
}
795

796
/*! \brief USRPB210 RX calibration table */
797
rx_gain_calib_table_t calib_table_b210[] = {
798 799 800 801 802 803
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
  {-1,0}
laurent's avatar
laurent committed
804
};
805

806
/*! \brief USRPB210 RX calibration table */
807
rx_gain_calib_table_t calib_table_b210_38[] = {
808 809 810 811 812 813
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
  {-1,0}
laurent's avatar
laurent committed
814
};
815

816
/*! \brief USRPx310 RX calibration table */
817
rx_gain_calib_table_t calib_table_x310[] = {
818 819 820 821 822 823
  {3500000000.0,77.0},
  {2660000000.0,81.0},
  {2300000000.0,81.0},
  {1880000000.0,82.0},
  {816000000.0,85.0},
  {-1,0}
laurent's avatar
laurent committed
824 825 826
};

/*! \brief Set RX gain offset
827 828
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
laurent's avatar
laurent committed
829
 * \returns 0 in success
830
 */
831
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
832 833 834
  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
  double min_diff = 6e9,diff,gain_adj=0.0;
835

836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
      case 30720000:
        break;

      case 23040000:
        gain_adj=1.25;
        break;

      case 15360000:
        gain_adj=3.0;
        break;

      case 7680000:
        gain_adj=6.0;
        break;

      case 3840000:
        gain_adj=9.0;
        break;

      case 1920000:
        gain_adj=12.0;
        break;

      default:
        LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
        exit(-1);
        break;
865
    }
866 867 868 869 870 871 872 873 874 875 876 877
  }

  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
    LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
          i,
          openair0_cfg->rx_gain_calib_table[i].freq,
          openair0_cfg->rx_gain_calib_table[i].offset,diff);

    if (min_diff > diff) {
      min_diff = diff;
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
laurent's avatar
laurent committed
878
    }
879 880 881

    i++;
  }
882 883
}

laurent's avatar
laurent committed
884
/*! \brief print the USRP statistics
885 886 887
* \param device the hardware to use
* \returns  0 on success
*/
888 889
int trx_usrp_get_stats(openair0_device *device) {
  return(0);
890
}
891

laurent's avatar
laurent committed
892 893 894 895
/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
896 897
int trx_usrp_reset_stats(openair0_device *device) {
  return(0);
898
}
899

900 901
#if defined(USRP_REC_PLAY)
extern "C" {
902 903 904 905 906
  /*! \brief Initializer for USRP record/playback config
   * \param parameter array description
   * \returns  0 on success
   */
  int trx_usrp_recplay_config_init(paramdef_t *usrp_recplay_params) {
907 908 909 910
    // --subframes-file
    memcpy(usrp_recplay_params[0].optname, config_opt_sf_file, strlen(config_opt_sf_file));
    usrp_recplay_params[0].helpstr = config_hlp_sf_file;
    usrp_recplay_params[0].paramflags=PARAMFLAG_NOFREE;
bruno mongazon's avatar
bruno mongazon committed
911
    usrp_recplay_params[0].strptr=(char **)&u_sf_filename;
912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963
    usrp_recplay_params[0].defstrval = NULL;
    usrp_recplay_params[0].type=TYPE_STRING;
    usrp_recplay_params[0].numelt=sizeof(u_sf_filename);
    // --subframes-record
    memcpy(usrp_recplay_params[1].optname, config_opt_sf_rec, strlen(config_opt_sf_rec));
    usrp_recplay_params[1].helpstr = config_hlp_sf_rec;
    usrp_recplay_params[1].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[1].uptr=&u_sf_record;
    usrp_recplay_params[1].defuintval=0;
    usrp_recplay_params[1].type=TYPE_UINT;
    usrp_recplay_params[1].numelt=0;
    // --subframes-replay
    memcpy(usrp_recplay_params[2].optname, config_opt_sf_rep, strlen(config_opt_sf_rep));
    usrp_recplay_params[2].helpstr = config_hlp_sf_rep;
    usrp_recplay_params[2].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[2].uptr=&u_sf_replay;
    usrp_recplay_params[2].defuintval=0;
    usrp_recplay_params[2].type=TYPE_UINT;
    usrp_recplay_params[2].numelt=0;
    // --subframes-max
    memcpy(usrp_recplay_params[3].optname, config_opt_sf_max, strlen(config_opt_sf_max));
    usrp_recplay_params[3].helpstr = config_hlp_sf_max;
    usrp_recplay_params[3].paramflags=0;
    usrp_recplay_params[3].uptr=&u_sf_max;
    usrp_recplay_params[3].defuintval=DEF_NB_SF;
    usrp_recplay_params[3].type=TYPE_UINT;
    usrp_recplay_params[3].numelt=0;
    // --subframes-loops
    memcpy(usrp_recplay_params[4].optname, config_opt_sf_loops, strlen(config_opt_sf_loops));
    usrp_recplay_params[4].helpstr = config_hlp_sf_loops;
    usrp_recplay_params[4].paramflags=0;
    usrp_recplay_params[4].uptr=&u_sf_loops;
    usrp_recplay_params[4].defuintval=DEF_SF_NB_LOOP;
    usrp_recplay_params[4].type=TYPE_UINT;
    usrp_recplay_params[4].numelt=0;
    // --subframes-read-delay
    memcpy(usrp_recplay_params[5].optname, config_opt_sf_rdelay, strlen(config_opt_sf_rdelay));
    usrp_recplay_params[5].helpstr = config_hlp_sf_rdelay;
    usrp_recplay_params[5].paramflags=0;
    usrp_recplay_params[5].uptr=&u_sf_read_delay;
    usrp_recplay_params[5].defuintval=DEF_SF_DELAY_READ;
    usrp_recplay_params[5].type=TYPE_UINT;
    usrp_recplay_params[5].numelt=0;
    // --subframes-write-delay
    memcpy(usrp_recplay_params[6].optname, config_opt_sf_wdelay, strlen(config_opt_sf_wdelay));
    usrp_recplay_params[6].helpstr = config_hlp_sf_wdelay;
    usrp_recplay_params[6].paramflags=0;
    usrp_recplay_params[6].uptr=&u_sf_write_delay;
    usrp_recplay_params[6].defuintval=DEF_SF_DELAY_WRITE;
    usrp_recplay_params[6].type=TYPE_UINT;
    usrp_recplay_params[6].numelt=0;
    return 0; // always ok
964
  }
965 966 967
}
#endif

968
extern "C" {
969 970 971 972
  /*! \brief Initialize Openair USRP target. It returns 0 if OK
   * \param device the hardware to use
   * \param openair0_cfg RF frontend parameters set by application
   */
973
  int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
974 975
    LOG_D(PHY, "openair0_cfg[0].sdr_addrs == '%s'\n", openair0_cfg[0].sdr_addrs);
    LOG_D(PHY, "openair0_cfg[0].clock_source == '%d'\n", openair0_cfg[0].clock_source);
976
#if defined(USRP_REC_PLAY)
977 978 979 980
    paramdef_t usrp_recplay_params[7];
    struct sysinfo systeminfo;
    // to check
    static int done = 0;
981

982 983 984
    if (done == 1) {
      return 0;
    } // prevent from multiple init
985

986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039
    done = 1;
    // end to check
    // Use mmap for IQ files for systems with less than 6GB total RAM
    sysinfo(&systeminfo);

    if (systeminfo.totalram < 6144000000) {
      use_mmap = 0;
    }

    memset(usrp_recplay_params, 0, 7*sizeof(paramdef_t));
    memset(&u_sf_filename[0], 0, 1024);

    if (trx_usrp_recplay_config_init(usrp_recplay_params) != 0) {
      std::cerr << "USRP device record/replay mode configuration error exiting" << std::endl;
      return -1;
    }

    config_process_cmdline(usrp_recplay_params,sizeof(usrp_recplay_params)/sizeof(paramdef_t),NULL);

    if (strlen(u_sf_filename) == 0) {
      (void) strcpy(u_sf_filename, DEF_SF_FILE);
    }

    if (u_sf_replay == 1) u_sf_mode = 2;

    if (u_sf_record == 1) u_sf_mode = 1;

    if (u_sf_mode == 2) {
      // Replay subframes from from file
      int bw_gain_adjust=0;
      device->openair0_cfg = openair0_cfg;
      device->type = USRP_B200_DEV;
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
      openair0_cfg[0].tx_sample_advance     = 80;
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
      set_rx_gain_offset(&openair0_cfg[0],0,bw_gain_adjust);
      device->priv = NULL;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      std::cerr << "USRP device initialized in subframes replay mode for " << u_sf_loops << " loops. Use mmap="
                << use_mmap << std::endl;
    } else {
1040
#endif
1041 1042
      uhd::set_thread_priority_safe(1.0);
      usrp_state_t *s = (usrp_state_t *)calloc(sizeof(usrp_state_t),1);
1043

1044 1045
      if (openair0_cfg[0].clock_source==gpsdo)
        s->use_gps =1;
laurent's avatar
laurent committed
1046

1047 1048 1049 1050 1051
      // Initialize USRP device
      device->openair0_cfg = openair0_cfg;
      int vers=0,subvers=0,subsubvers=0;
      int bw_gain_adjust=0;
#if defined(USRP_REC_PLAY)
laurent's avatar
laurent committed
1052

1053 1054 1055
      if (u_sf_mode == 1) {
        std::cerr << "USRP device initialized in subframes record mode" << std::endl;
      }
laurent's avatar
laurent committed
1056

1057 1058 1059 1060
#endif
      sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
      LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
            uhd::get_version_string().c_str(),vers,subvers,subsubvers);
laurent's avatar
laurent committed
1061

1062 1063 1064 1065 1066 1067
      std::string args;
      if (openair0_cfg[0].sdr_addrs == NULL) {
        args = "type=b200";
      } else {
        args = openair0_cfg[0].sdr_addrs;
      }
1068

1069
      uhd::device_addrs_t device_adds = uhd::device::find(args);
1070

1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087
      if (device_adds.size() == 0) {
        std::cerr<<"No USRP Device Found. " << std::endl;
        free(s);
        return -1;
      } else if (device_adds.size() > 1) {
        std::cerr<<"More than one USRP Device Found. Please specify device more precisely in config file." << std::endl;
	free(s);
	return -1;
      }

      std::cerr << "Found USRP " << device_adds[0].get("type") << "\n";
      double usrp_master_clock;

      if (device_adds[0].get("type") == "b200") {
        printf("Found USRP b200\n");
        device->type = USRP_B200_DEV;
        usrp_master_clock = 30.72e6;
1088
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
1089 1090
        args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
      }
1091

1092 1093 1094 1095 1096 1097
      if (device_adds[0].get("type") == "n3xx") {
        printf("Found USRP n300\n");
        device->type=USRP_X300_DEV; //treat it as X300 for now
        usrp_master_clock = 122.88e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1098

1099 1100 1101 1102 1103 1104
      if (device_adds[0].get("type") == "x300") {
        printf("Found USRP x300\n");
        device->type=USRP_X300_DEV;
        usrp_master_clock = 184.32e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1105

1106
      s->usrp = uhd::usrp::multi_usrp::make(args);
1107

1108 1109 1110 1111 1112
      // lock mboard clocks
      if (openair0_cfg[0].clock_source == internal)
        s->usrp->set_clock_source("internal");
      else
        s->usrp->set_clock_source("external");
1113

1114
      if (device->type==USRP_X300_DEV) {
1115 1116 1117 1118 1119
        openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
#if defined(USRP_REC_PLAY)
        std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
#endif
        LOG_I(PHY,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);
laurent's avatar
laurent committed
1120

1121 1122 1123 1124 1125 1126 1127 1128
        switch ((int)openair0_cfg[0].sample_rate) {
          case 122880000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15; //to be checked
            openair0_cfg[0].tx_bw                 = 80e6;
            openair0_cfg[0].rx_bw                 = 80e6;
            break;
1129

1130 1131 1132 1133 1134 1135 1136
          case 61440000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 40e6;
            openair0_cfg[0].rx_bw                 = 40e6;
            break;
Massive's avatar
Massive committed
1137

1138 1139 1140 1141 1142 1143 1144
          case 30720000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;
Massive's avatar
Massive committed
1145

1146 1147 1148 1149 1150 1151
          case 15360000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 45;
            openair0_cfg[0].tx_bw                 = 10e6;
            openair0_cfg[0].rx_bw                 = 10e6;
            break;
1152

1153 1154 1155 1156 1157 1158
          case 7680000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 5e6;
            openair0_cfg[0].rx_bw                 = 5e6;
            break;
1159

1160 1161 1162 1163 1164 1165
          case 1920000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 1.25e6;
            openair0_cfg[0].rx_bw                 = 1.25e6;
            break;
Laurent's avatar
Laurent committed
1166

1167 1168 1169 1170 1171
          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
        }
1172
      }
laurent's avatar
laurent committed
1173

1174
      if (device->type == USRP_B200_DEV) {
1175 1176 1177
        if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
          bw_gain_adjust=0;
1178
#if defined(USRP_REC_PLAY)
1179 1180 1181 1182 1183
          std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
#endif
        } else {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
          bw_gain_adjust=1;
1184
#if defined(USRP_REC_PLAY)
1185 1186 1187
          std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
#endif
        }
1188

1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233
        switch ((int)openair0_cfg[0].sample_rate) {
          case 30720000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 115;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 23040000:
            s->usrp->set_master_clock_rate(23.04e6); //to be checked
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 113;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 15360000:
            s->usrp->set_master_clock_rate(30.72e06);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 103;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 7680000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 80;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 1920000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 40;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
laurent's avatar
laurent committed
1234
        }
1235
      }
Laurent's avatar
Laurent committed
1236

1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256
      /* device specific */
      //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
      //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

      for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
        if (i<openair0_cfg[0].rx_num_channels) {
          s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
          set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
          ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
          // limit to maximum gain
          AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                       "RX Gain too high, lower by %f dB\n",
                       openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
          s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
          LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
laurent's avatar
laurent committed
1257
        }
1258
      }
1259

1260
      LOG_D(PHY, "usrp->get_tx_num_channels() == %zd\n", s->usrp->get_tx_num_channels());
1261
      LOG_D(PHY, "openair0_cfg[0].tx_num_channels == %d\n", openair0_cfg[0].tx_num_channels);
1262

1263 1264
      for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
        ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
1265

1266 1267 1268 1269
        if (i<openair0_cfg[0].tx_num_channels) {
          s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
          s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
1270
          LOG_I(PHY,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
laurent's avatar
laurent committed
1271
        }
1272
      }
laurent's avatar
laurent committed
1273

1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317
      //s->usrp->set_clock_source("external");
      //s->usrp->set_time_source("external");
      // display USRP settings
      LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
      sleep(1);
      // create tx & rx streamer
      uhd::stream_args_t stream_args_rx("sc16", "sc16");
      int samples=openair0_cfg[0].sample_rate;
      int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
      samples/=10000;
      LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);

      if ( samples < max )
        stream_args_rx.args["spp"] = str(boost::format("%d") % samples );

      LOG_I(PHY,"rx_max_num_samps %zu\n",
            s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

      for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
        stream_args_rx.channels.push_back(i);

      s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
      uhd::stream_args_t stream_args_tx("sc16", "sc16");

      for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
        stream_args_tx.channels.push_back(i);

      s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

      /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
      for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
        s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

      for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
        s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

      for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
        LOG_I(PHY,"RX Channel %d\n",i);
        LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
        LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
        LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
        LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1318

1319 1320 1321 1322 1323 1324 1325 1326
      for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
        LOG_I(PHY,"TX Channel %d\n",i);
        LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
        LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
        LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
        LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1327

1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356
      LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());
      device->priv = s;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      s->sample_rate = openair0_cfg[0].sample_rate;

      // TODO:
      // init tx_forward_nsamps based usrp_time_offset ex
      if(is_equal(s->sample_rate, (double)30.72e6))
        s->tx_forward_nsamps  = 176;

      if(is_equal(s->sample_rate, (double)15.36e6))
        s->tx_forward_nsamps = 90;

      if(is_equal(s->sample_rate, (double)7.68e6))
        s->tx_forward_nsamps = 50;

      if (s->use_gps == 1) {
        if (sync_to_gps(device)) {
          LOG_I(PHY,"USRP fails to sync with GPS...\n");
          exit(0);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1357
        }
1358
      }
1359 1360 1361 1362

#if defined(USRP_REC_PLAY)
    }

1363 1364
#endif
#if defined(USRP_REC_PLAY)
1365 1366 1367 1368 1369 1370 1371

    if (u_sf_mode == 1) { // record mode
      ms_sample = (iqrec_t *) malloc(u_sf_max * sizeof(iqrec_t));

      if (ms_sample == NULL) {
        std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
        exit(-1);
1372
      }
1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434

      memset(ms_sample, 0, u_sf_max * BELL_LABS_IQ_BYTES_PER_SF);
    }

    if (u_sf_mode == 2) {
      if (use_mmap) {
        // use mmap
        mmapfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (mmapfd != 0) {
          fstat(mmapfd, &sb);
          std::cerr << "Loading subframes using mmap() from " << u_sf_filename << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          ms_sample = (iqrec_t *) mmap(NULL, sb.st_size, PROT_WRITE, MAP_PRIVATE, mmapfd, 0);

          if (ms_sample != MAP_FAILED) {
            nb_samples = (sb.st_size / sizeof(iqrec_t));
            int aligned = (((unsigned long)ms_sample & 31) == 0)? 1:0;
            std::cerr<< "Loaded "<< nb_samples << " subframes." << std::endl;

            if (aligned == 0) {
              std::cerr<< "mmap address is not 32 bytes aligned, exiting." << std::endl;
              close(mmapfd);
              exit(-1);
            }
          } else {
            std::cerr << "Cannot mmap file, exiting." << std::endl;
            close(mmapfd);
            exit(-1);
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
      } else {
        iqfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (iqfd != 0) {
          fstat(iqfd, &sb);
          nb_samples = (sb.st_size / sizeof(iqrec_t));
          std::cerr << "Loading " << nb_samples << " subframes from " << u_sf_filename
                    << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          // allocate buffer for 1 sample at a time
          ms_sample = (iqrec_t *) malloc(sizeof(iqrec_t));

          if (ms_sample == NULL) {
            std::cerr<< "Memory allocation failed for individual subframe replay mode." << std::endl;
            close(iqfd);
            exit(-1);
          }

          memset(ms_sample, 0, sizeof(iqrec_t));

          // point at beginning of file
          if (lseek(iqfd, 0, SEEK_SET) == 0) {
            std::cerr << "Initial seek at beginning of the file" << std::endl;
          } else {
            std::cerr << "Problem initial seek at beginning of the file" << std::endl;
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
1435
      }
laurent's avatar
laurent committed
1436
    }
1437 1438 1439 1440

#endif
    return 0;
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
1441
}
1442
/*@}*/