nr-ue.c 50.3 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.0  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

/*! \file lte-ue.c
 * \brief threads and support functions for real-time LTE UE target
 * \author R. Knopp, F. Kaltenberger, Navid Nikaein
 * \date 2015
 * \version 0.1
 * \company Eurecom
 * \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr
 * \note
 * \warning
 */
#include "nr-uesoftmodem.h"

#include "rt_wrapper.h"

36 37
#include "LAYER2/NR_MAC_UE/mac.h"
//#include "RRC/LTE/rrc_extern.h"
38 39 40 41 42
#include "PHY_INTERFACE/phy_interface_extern.h"

#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all

43
#include "fapi_nr_ue_l1.h"
44
#include "PHY/phy_extern_nr_ue.h"
45
#include "LAYER2/NR_MAC_UE/mac_proto.h"
46
#include "RRC/NR_UE/rrc_proto.h"
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

#include "SCHED_NR/extern.h"
//#ifndef NO_RAT_NR
#include "SCHED_NR/phy_frame_config_nr.h"
//#endif

#include "../../../openair1/PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"

#include "UTIL/LOG/log_extern.h"
#include "UTIL/OTG/otg_tx.h"
#include "UTIL/OTG/otg_externs.h"
#include "UTIL/MATH/oml.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"

#include "T.h"

extern double cpuf;
Guy De Souza's avatar
Guy De Souza committed
65 66
static  nfapi_nr_config_request_t config_t;
static  nfapi_nr_config_request_t* config =&config_t;
67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140

#define FRAME_PERIOD    100000000ULL
#define DAQ_PERIOD      66667ULL
#define FIFO_PRIORITY   40

typedef enum {
    pss=0,
    pbch=1,
    si=2
} sync_mode_t;

void init_UE_threads(PHY_VARS_NR_UE *UE);
void *UE_thread(void *arg);
void init_UE(int nb_inst);

int32_t **rxdata;
int32_t **txdata;

#define KHz (1000UL)
#define MHz (1000*KHz)
#define SAIF_ENABLED

#ifdef SAIF_ENABLED
uint64_t	g_ue_rx_thread_busy	= 0;
#endif

typedef struct eutra_band_s {
    int16_t band;
    uint32_t ul_min;
    uint32_t ul_max;
    uint32_t dl_min;
    uint32_t dl_max;
    lte_frame_type_t frame_type;
} eutra_band_t;

typedef struct band_info_s {
    int nbands;
    eutra_band_t band_info[100];
} band_info_t;

band_info_t bands_to_scan;

static const eutra_band_t eutra_bands[] = {
    { 1, 1920    * MHz, 1980    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    { 2, 1850    * MHz, 1910    * MHz, 1930    * MHz, 1990    * MHz, FDD},
    { 3, 1710    * MHz, 1785    * MHz, 1805    * MHz, 1880    * MHz, FDD},
    { 4, 1710    * MHz, 1755    * MHz, 2110    * MHz, 2155    * MHz, FDD},
    { 5,  824    * MHz,  849    * MHz,  869    * MHz,  894    * MHz, FDD},
    { 6,  830    * MHz,  840    * MHz,  875    * MHz,  885    * MHz, FDD},
    { 7, 2500    * MHz, 2570    * MHz, 2620    * MHz, 2690    * MHz, FDD},
    { 8,  880    * MHz,  915    * MHz,  925    * MHz,  960    * MHz, FDD},
    { 9, 1749900 * KHz, 1784900 * KHz, 1844900 * KHz, 1879900 * KHz, FDD},
    {10, 1710    * MHz, 1770    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    {11, 1427900 * KHz, 1452900 * KHz, 1475900 * KHz, 1500900 * KHz, FDD},
    {12,  698    * MHz,  716    * MHz,  728    * MHz,  746    * MHz, FDD},
    {13,  777    * MHz,  787    * MHz,  746    * MHz,  756    * MHz, FDD},
    {14,  788    * MHz,  798    * MHz,  758    * MHz,  768    * MHz, FDD},
    {17,  704    * MHz,  716    * MHz,  734    * MHz,  746    * MHz, FDD},
    {20,  832    * MHz,  862    * MHz,  791    * MHz,  821    * MHz, FDD},
    {22, 3510    * MHz, 3590    * MHz, 3410    * MHz, 3490    * MHz, FDD},
    {33, 1900    * MHz, 1920    * MHz, 1900    * MHz, 1920    * MHz, TDD},
    {34, 2010    * MHz, 2025    * MHz, 2010    * MHz, 2025    * MHz, TDD},
    {35, 1850    * MHz, 1910    * MHz, 1850    * MHz, 1910    * MHz, TDD},
    {36, 1930    * MHz, 1990    * MHz, 1930    * MHz, 1990    * MHz, TDD},
    {37, 1910    * MHz, 1930    * MHz, 1910    * MHz, 1930    * MHz, TDD},
    {38, 2570    * MHz, 2620    * MHz, 2570    * MHz, 2630    * MHz, TDD},
    {39, 1880    * MHz, 1920    * MHz, 1880    * MHz, 1920    * MHz, TDD},
    {40, 2300    * MHz, 2400    * MHz, 2300    * MHz, 2400    * MHz, TDD},
    {41, 2496    * MHz, 2690    * MHz, 2496    * MHz, 2690    * MHz, TDD},
    {42, 3400    * MHz, 3600    * MHz, 3400    * MHz, 3600    * MHz, TDD},
    {43, 3600    * MHz, 3800    * MHz, 3600    * MHz, 3800    * MHz, TDD},
    {44, 703    * MHz, 803    * MHz, 703    * MHz, 803    * MHz, TDD},
};

Hongzhi Wang's avatar
Hongzhi Wang committed
141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
PHY_VARS_NR_UE* init_nr_ue_vars(NR_DL_FRAME_PARMS *frame_parms,
			  uint8_t UE_id,
			  uint8_t abstraction_flag)

{

  PHY_VARS_NR_UE* ue;

  if (frame_parms!=(NR_DL_FRAME_PARMS *)NULL) { // if we want to give initial frame parms, allocate the PHY_VARS_UE structure and put them in
    ue = (PHY_VARS_NR_UE *)malloc(sizeof(PHY_VARS_NR_UE));
    memset(ue,0,sizeof(PHY_VARS_NR_UE));
    memcpy(&(ue->frame_parms), frame_parms, sizeof(NR_DL_FRAME_PARMS));
  }
  else ue = PHY_vars_UE_g[UE_id][0];

  ue->Mod_id      = UE_id;
  ue->mac_enabled = 1;
  // initialize all signal buffers
  init_nr_ue_signal(ue,1,abstraction_flag);
  // intialize transport
  //init_nr_ue_transport(ue,abstraction_flag);

  return(ue);
}

166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
void init_thread(int sched_runtime, int sched_deadline, int sched_fifo, cpu_set_t *cpuset, char * name) {

#ifdef DEADLINE_SCHEDULER
    if (sched_runtime!=0) {
        struct sched_attr attr= {0};
        attr.size = sizeof(attr);
        attr.sched_policy = SCHED_DEADLINE;
        attr.sched_runtime  = sched_runtime;
        attr.sched_deadline = sched_deadline;
        attr.sched_period   = 0;
        AssertFatal(sched_setattr(0, &attr, 0) == 0,
                    "[SCHED] %s thread: sched_setattr failed %s \n", name, strerror(errno));
        LOG_I(HW,"[SCHED][eNB] %s deadline thread %lu started on CPU %d\n",
              name, (unsigned long)gettid(), sched_getcpu());
    }

#else
    if (CPU_COUNT(cpuset) > 0)
        AssertFatal( 0 == pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), cpuset), "");
    struct sched_param sp;
    sp.sched_priority = sched_fifo;
    AssertFatal(pthread_setschedparam(pthread_self(),SCHED_FIFO,&sp)==0,
                "Can't set thread priority, Are you root?\n");
    /* Check the actual affinity mask assigned to the thread */
    cpu_set_t *cset=CPU_ALLOC(CPU_SETSIZE);
    if (0 == pthread_getaffinity_np(pthread_self(), CPU_ALLOC_SIZE(CPU_SETSIZE), cset)) {
      char txt[512]={0};
      for (int j = 0; j < CPU_SETSIZE; j++)
        if (CPU_ISSET(j, cset))
	  sprintf(txt+strlen(txt), " %d ", j);
      printf("CPU Affinity of thread %s is %s\n", name, txt);
    }
    CPU_FREE(cset);
#endif

    // Lock memory from swapping. This is a process wide call (not constraint to this thread).
    mlockall(MCL_CURRENT | MCL_FUTURE);
    pthread_setname_np( pthread_self(), name );

    // LTS: this sync stuff should be wrong
    printf("waiting for sync (%s)\n",name);
    pthread_mutex_lock(&sync_mutex);
    printf("Locked sync_mutex, waiting (%s)\n",name);
    while (sync_var<0)
        pthread_cond_wait(&sync_cond, &sync_mutex);
    pthread_mutex_unlock(&sync_mutex);
    printf("started %s as PID: %ld\n",name, gettid());
}

void init_UE(int nb_inst)
{
217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238
    int inst;
    NR_UE_MAC_INST_t *mac_inst;
    for (inst=0; inst < nb_inst; inst++) {
        //    UE->rfdevice.type      = NONE_DEV;
        PHY_VARS_NR_UE *UE = PHY_vars_UE_g[inst][0];
        LOG_I(PHY,"Initializing memory for UE instance %d (%p)\n",inst,PHY_vars_UE_g[inst]);
            PHY_vars_UE_g[inst][0] = init_nr_ue_vars(NULL,inst,0);

        AssertFatal((UE->if_inst = nr_ue_if_module_init(inst)) != NULL, "can not initial IF module\n");
        nr_l3_init_ue();
        nr_l2_init_ue();
        
        mac_inst = get_mac_inst(0);
        mac_inst->if_module = UE->if_inst;
        UE->if_inst->scheduled_response = nr_ue_scheduled_response;
        UE->if_inst->phy_config_request = nr_ue_phy_config_request;

        AssertFatal(0 == pthread_create(&UE->proc.pthread_ue,
                                        &UE->proc.attr_ue,
                                        UE_thread,
                                        (void*)UE), "");
    }
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368

  printf("UE threads created by %ld\n", gettid());
#if 0
#if defined(ENABLE_USE_MME)
  extern volatile int start_UE;
  while (start_UE == 0) {
    sleep(1);
  }
#endif
#endif
}

/*!
 * \brief This is the UE synchronize thread.
 * It performs band scanning and synchonization.
 * \param arg is a pointer to a \ref PHY_VARS_NR_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */
static void *UE_thread_synch(void *arg) {
    static int __thread UE_thread_synch_retval;
    int i, hw_slot_offset;
    PHY_VARS_NR_UE *UE = (PHY_VARS_NR_UE*) arg;
    int current_band = 0;
    int current_offset = 0;
    sync_mode_t sync_mode = pbch;
    int CC_id = UE->CC_id;
    int freq_offset=0;
    char threadname[128];

    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    if ( threads.iq != -1 )
        CPU_SET(threads.iq, &cpuset);
    // this thread priority must be lower that the main acquisition thread
    sprintf(threadname, "sync UE %d\n", UE->Mod_id);
    init_thread(100000, 500000, FIFO_PRIORITY-1, &cpuset, threadname);

    UE->is_synchronized = 0;

    if (UE->UE_scan == 0) {
        int ind;
        for ( ind=0;
                ind < sizeof(eutra_bands) / sizeof(eutra_bands[0]);
                ind++) {
            current_band = eutra_bands[ind].band;
            LOG_D(PHY, "Scanning band %d, dl_min %"PRIu32", ul_min %"PRIu32"\n", current_band, eutra_bands[ind].dl_min,eutra_bands[ind].ul_min);
            if ( eutra_bands[ind].dl_min <= downlink_frequency[0][0] && eutra_bands[ind].dl_max >= downlink_frequency[0][0] ) {
                for (i=0; i<4; i++)
                    uplink_frequency_offset[CC_id][i] = eutra_bands[ind].ul_min - eutra_bands[ind].dl_min;
                break;
            }
        }
        AssertFatal( ind < sizeof(eutra_bands) / sizeof(eutra_bands[0]), "Can't find EUTRA band for frequency");

        LOG_I( PHY, "[SCHED][UE] Check absolute frequency DL %"PRIu32", UL %"PRIu32" (oai_exit %d, rx_num_channels %d)\n",
               downlink_frequency[0][0], downlink_frequency[0][0]+uplink_frequency_offset[0][0],
               oai_exit, openair0_cfg[0].rx_num_channels);

        for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
            openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
            openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
            if (uplink_frequency_offset[CC_id][i] != 0) //
                openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_FDD;
            else //FDD
                openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_TDD;
        }
        sync_mode = pbch;

    } else {
        current_band=0;
        for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
            downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[CC_id].dl_min;
            uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] =
                bands_to_scan.band_info[CC_id].ul_min-bands_to_scan.band_info[CC_id].dl_min;
            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
            openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
            openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
        }
    }

    //    AssertFatal(UE->rfdevice.trx_start_func(&UE->rfdevice) == 0, "Could not start the device\n");

    while (oai_exit==0) {
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        while (UE->proc.instance_cnt_synch < 0)
            // the thread waits here most of the time
            pthread_cond_wait( &UE->proc.cond_synch, &UE->proc.mutex_synch );
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        switch (sync_mode) {
        case pss:
            LOG_I(PHY,"[SCHED][UE] Scanning band %d (%d), freq %u\n",bands_to_scan.band_info[current_band].band, current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
            lte_sync_timefreq(UE,current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
            current_offset += 20000000; // increase by 20 MHz

            if (current_offset > bands_to_scan.band_info[current_band].dl_max-bands_to_scan.band_info[current_band].dl_min) {
                current_band++;
                current_offset=0;
            }

            if (current_band==bands_to_scan.nbands) {
                current_band=0;
                oai_exit=1;
            }

            for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].dl_min+current_offset;
                uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].ul_min-bands_to_scan.band_info[0].dl_min + current_offset;

                openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
                openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
                openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
                if (UE->UE_scan_carrier) {
                    openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }

            }

            break;

        case pbch:

#if DISABLE_LOG_X
            printf("[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#else
            LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#endif
Hongzhi Wang's avatar
Hongzhi Wang committed
369
            if (nr_initial_sync( UE, UE->mode ) == 0) {
370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427

                hw_slot_offset = (UE->rx_offset<<1) / UE->frame_parms.samples_per_tti;
                printf("Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %d (DL %u, UL %u), UE_scan_carrier %d\n",
                       hw_slot_offset,
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset,
                       UE->UE_scan_carrier );


                    // rerun with new cell parameters and frequency-offset
                    for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                        openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
			if (UE->UE_scan_carrier == 1) {
                        if (freq_offset >= 0)
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] += abs(UE->common_vars.freq_offset);
                        else
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] -= abs(UE->common_vars.freq_offset);
                        openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i]+uplink_frequency_offset[CC_id][i];
                        downlink_frequency[CC_id][i] = openair0_cfg[CC_id].rx_freq[i];
                        freq_offset=0;
                    }
	  }

                    // reconfigure for potentially different bandwidth
                    switch(UE->frame_parms.N_RB_DL) {
                    case 6:
                        openair0_cfg[UE->rf_map.card].sample_rate =1.92e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =.96e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =.96e6;
                        //            openair0_cfg[0].rx_gain[0] -= 12;
                        break;
                    case 25:
                        openair0_cfg[UE->rf_map.card].sample_rate =7.68e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =2.5e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =2.5e6;
                        //            openair0_cfg[0].rx_gain[0] -= 6;
                        break;
                    case 50:
                        openair0_cfg[UE->rf_map.card].sample_rate =15.36e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =5.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =5.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 3;
                        break;
                    case 100:
                        openair0_cfg[UE->rf_map.card].sample_rate=30.72e6;
                        openair0_cfg[UE->rf_map.card].rx_bw=10.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw=10.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 0;
                        break;
                    }

                    UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
                    //UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
                    //UE->rfdevice.trx_stop_func(&UE->rfdevice);
                    // sleep(1);
hongzhi wang's avatar
hongzhi wang committed
428
		    nr_init_frame_parms_ue(config,&UE->frame_parms);
429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625
                    /*if (UE->rfdevice.trx_start_func(&UE->rfdevice) != 0 ) {
                        LOG_E(HW,"Could not start the device\n");
                        oai_exit=1;
                    }*/

		if (UE->UE_scan_carrier == 1) {

		  UE->UE_scan_carrier = 0;
                } else {
                    AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                    UE->is_synchronized = 1;
                    AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

                    if( UE->mode == rx_dump_frame ) {
                        FILE *fd;
                        if ((UE->proc.proc_rxtx[0].frame_rx&1) == 0) {  // this guarantees SIB1 is present
                            if ((fd = fopen("rxsig_frame0.dat","w")) != NULL) {
                                fwrite((void*)&UE->common_vars.rxdata[0][0],
                                       sizeof(int32_t),
                                       10*UE->frame_parms.samples_per_subframe,
                                       fd);
                                LOG_I(PHY,"Dummping Frame ... bye bye \n");
                                fclose(fd);
                                exit(0);
                            } else {
                                LOG_E(PHY,"Cannot open file for writing\n");
                                exit(0);
                            }
                        } else {
                            AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                            UE->is_synchronized = 0;
                            AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

                        }
                    }
                }
            } else {
                // initial sync failed
                // calculate new offset and try again
                if (UE->UE_scan_carrier == 1) {
                    if (freq_offset >= 0)
                        freq_offset += 100;
                    freq_offset *= -1;

                    if (abs(freq_offset) > 7500) {
                        LOG_I( PHY, "[initial_sync] No cell synchronization found, abandoning\n" );
                        FILE *fd;
                        if ((fd = fopen("rxsig_frame0.dat","w"))!=NULL) {
                            fwrite((void*)&UE->common_vars.rxdata[0][0],
                                   sizeof(int32_t),
                                   10*UE->frame_parms.samples_per_subframe,
                                   fd);
                            LOG_I(PHY,"Dummping Frame ... bye bye \n");
                            fclose(fd);
                            exit(0);
                        }
                        //mac_xface->macphy_exit("No cell synchronization found, abandoning"); new mac
                        return &UE_thread_synch_retval; // not reached
                    }
                }
#if DISABLE_LOG_X
                printf("[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
#else
                LOG_I(PHY, "[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
#endif

                for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                    openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
                    if (UE->UE_scan_carrier==1)
                        openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }
                UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
            }// initial_sync=0
            break;
        case si:
        default:
            break;
        }

        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        // indicate readiness
        UE->proc.instance_cnt_synch--;
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_UE_THREAD_SYNCH, 0 );
    }  // while !oai_exit

    return &UE_thread_synch_retval;
}

/*!
 * \brief This is the UE thread for RX subframe n and TX subframe n+4.
 * This thread performs the phy_procedures_UE_RX() on every received slot.
 * then, if TX is enabled it performs TX for n+4.
 * \param arg is a pointer to a \ref PHY_VARS_NR_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */

static void *UE_thread_rxn_txnp4(void *arg) {
    static __thread int UE_thread_rxtx_retval;
    struct nr_rxtx_thread_data *rtd = arg;
    UE_nr_rxtx_proc_t *proc = rtd->proc;
    PHY_VARS_NR_UE    *UE   = rtd->UE;
    int ret;

    //proc->counter_decoder = 0;
    proc->instance_cnt_rxtx=-1;
    proc->subframe_rx=proc->sub_frame_start;

	proc->dci_err_cnt=0;
    char threadname[256];
    sprintf(threadname,"UE_%d_proc_%d", UE->Mod_id, proc->sub_frame_start);
    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    char timing_proc_name[256];
    sprintf(timing_proc_name,"Delay to process sub-frame proc %d",proc->sub_frame_start);

    if ( (proc->sub_frame_start+1)%RX_NB_TH == 0 && threads.one != -1 )
        CPU_SET(threads.one, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 1 && threads.two != -1 )
        CPU_SET(threads.two, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 2 && threads.three != -1 )
        CPU_SET(threads.three, &cpuset);
            //CPU_SET(threads.three, &cpuset);
    init_thread(900000,1000000 , FIFO_PRIORITY-1, &cpuset,
                threadname);

    while (!oai_exit) {
        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("nothing to add");
        }
        while (proc->instance_cnt_rxtx < 0) {
          // most of the time, the thread is waiting here
          pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
        }
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXn_TXnp4\n" );
          exit_fun("nothing to add");
        }

//        initRefTimes(t2);
        initRefTimes(t3);
        pickTime(current);
//        updateTimes(proc->gotIQs, &t2, 10000, "Delay to wake up UE_Thread_Rx (case 2)");

#ifndef NO_RAT_NR
        // Process Rx data for one sub-frame
        nr_slot_t nr_slot ; //= slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx);

        if (nr_slot == NR_TDD_DOWNLINK_SLOT) {
#else
        // Process Rx data for one sub-frame
        lte_subframe_t sf_type = subframe_select( &UE->frame_parms, proc->subframe_rx);
        if ((sf_type == SF_DL) ||
                (UE->frame_parms.frame_type == FDD) ||
                (sf_type == SF_S)) {

            if (UE->frame_parms.frame_type == TDD) {
                LOG_D(PHY, "%s,TDD%d,%s: calling UE_RX\n",
                      threadname,
                      UE->frame_parms.tdd_config,
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            } else {
                LOG_D(PHY, "%s,%s,%s: calling UE_RX\n",
                      threadname,
                      (UE->frame_parms.frame_type==FDD? "FDD":
                       (UE->frame_parms.frame_type==TDD? "TDD":"UNKNOWN_DUPLEX_MODE")),
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            }
#endif
#ifdef UE_SLOT_PARALLELISATION
            phy_procedures_slot_parallelization_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
            phy_procedures_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#endif
        }

#if UE_TIMING_TRACE
        start_meas(&UE->generic_stat);
#endif
        if (UE->mac_enabled==1) {

626 627 628 629 630 631 632
            //  trigger L2 to run ue_scheduler thru IF module
            //  [TODO] mapping right after NR initial sync
            if(1)
            if(UE->if_inst != NULL && UE->if_inst->ul_indication != NULL){
                UE->ul_indication.module_id = 0;
                UE->ul_indication.gNB_index = 0;
                UE->ul_indication.cc_id = 0;
633 634
                UE->ul_indication.slot = 0;     //  to be fill
                UE->ul_indication.frame = 0;    //  to be fill
635 636 637 638 639 640 641 642 643
                //  [TODO] mapping right after NR initial sync
                //UE->ul_indication.frame = ; 
                //UE->ul_indication.slot = ;
                
                UE->if_inst->ul_indication(&UE->ul_indication);
            }



644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694
#ifdef NEW_MAC
          ret = mac_xface->ue_scheduler(UE->Mod_id,
                                          proc->frame_rx,
                                          proc->subframe_rx,
                                          proc->nr_tti_rx,
                                          proc->frame_tx,
                                          proc->subframe_tx,
                                          proc->nr_tti_tx%(UE->frame_parms.ttis_per_subframe),
#ifndef NO_RAT_NR
                                          slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx),
#else
                                          subframe_select(&UE->frame_parms,proc->subframe_tx),
#endif
                                          0,
                                          0/*FIXME CC_id*/);
#endif

/*#else
            ret = mac_xface->ue_scheduler(UE->Mod_id,
                                          proc->frame_rx,
                                          proc->subframe_rx,
                                          proc->frame_tx,
                                          proc->subframe_tx,
                                          subframe_select(&UE->frame_parms,proc->subframe_tx),
                                          0,  */
//                                          0/*FIXME CC_id*/);
//#endif
            if ( ret != CONNECTION_OK) {
                char *txt;
                switch (ret) {
                case CONNECTION_LOST:
                    txt="RRC Connection lost, returning to PRACH";
                    break;
                case PHY_RESYNCH:
                    txt="RRC Connection lost, trying to resynch";
                    break;
                case RESYNCH:
                    txt="return to PRACH and perform a contention-free access";
                    break;
                default:
                    txt="UNKNOWN RETURN CODE";
                };
                LOG_E( PHY, "[UE %"PRIu8"] Frame %"PRIu32", subframe %u %s\n",
                       UE->Mod_id, proc->frame_rx, proc->subframe_tx,txt );
            }
        }
#if UE_TIMING_TRACE
        stop_meas(&UE->generic_stat);
#endif

        // Prepare the future Tx data
695
#if 0
696 697 698 699 700
        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
                (UE->frame_parms.frame_type == FDD) )
            if (UE->mode != loop_through_memory)
                phy_procedures_UE_TX(UE,proc,0,0,UE->mode,no_relay);
#endif
hongzhi wang's avatar
hongzhi wang committed
701
#if 0
702 703 704
        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_S) &&
                (UE->frame_parms.frame_type == TDD))
            if (UE->mode != loop_through_memory)
705
                //phy_procedures_UE_S_TX(UE,0,0,no_relay);
706
        updateTimes(current, &t3, 10000, timing_proc_name);
hongzhi wang's avatar
hongzhi wang committed
707
#endif
708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765

        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
        proc->instance_cnt_rxtx--;
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
    }

// thread finished
    free(arg);
    return &UE_thread_rxtx_retval;
}

/*!
 * \brief This is the main UE thread.
 * This thread controls the other three UE threads:
 * - UE_thread_rxn_txnp4 (even subframes)
 * - UE_thread_rxn_txnp4 (odd subframes)
 * - UE_thread_synch
 * \param arg unused
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */

void *UE_thread(void *arg) {

    PHY_VARS_NR_UE *UE = (PHY_VARS_NR_UE *) arg;
    //  int tx_enabled = 0;
    int dummy_rx[UE->frame_parms.nb_antennas_rx][UE->frame_parms.samples_per_tti] __attribute__((aligned(32)));
    openair0_timestamp timestamp,timestamp1;
    void* rxp[NB_ANTENNAS_RX], *txp[NB_ANTENNAS_TX];
    int start_rx_stream = 0;
    int i;
    char threadname[128];
    int th_id;
    UE->proc.proc_rxtx[0].counter_decoder = 0;
    UE->proc.proc_rxtx[1].counter_decoder = 0;
    UE->proc.proc_rxtx[2].counter_decoder = 0;

    static uint8_t thread_idx = 0;

    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    if ( threads.iq != -1 )
        CPU_SET(threads.iq, &cpuset);
    init_thread(100000, 500000, FIFO_PRIORITY, &cpuset,
                "UHD Threads");
    if (oaisim_flag == 0)
        AssertFatal(0== openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]), "");
    UE->rfdevice.host_type = RAU_HOST;
    sprintf(threadname, "Main UE %d", UE->Mod_id);
    pthread_setname_np(pthread_self(), threadname);
    init_UE_threads(UE);

#ifdef NAS_UE
766
    //MessageDef *message_p;
hongzhi wang's avatar
hongzhi wang committed
767 768
    //message_p = itti_alloc_new_message(TASK_NAS_UE, INITIALIZE_MESSAGE);
    //itti_send_msg_to_task (TASK_NAS_UE, UE->Mod_id + NB_eNB_INST, message_p);
769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850
#endif

    int tti_nr=-1;
    //int cumulated_shift=0;
    AssertFatal(UE->rfdevice.trx_start_func(&UE->rfdevice) == 0, "Could not start the device\n");
    while (!oai_exit) {
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
        int instance_cnt_synch = UE->proc.instance_cnt_synch;
        int is_synchronized    = UE->is_synchronized;
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

        if (is_synchronized == 0) {
            if (instance_cnt_synch < 0) {  // we can invoke the synch
                // grab 10 ms of signal and wakeup synch thread
                for (int i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                    rxp[i] = (void*)&UE->common_vars.rxdata[i][0];

                if (UE->mode != loop_through_memory)
                    AssertFatal( UE->frame_parms.samples_per_subframe*10 ==
                                 UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                            &timestamp,
                                                            rxp,
                                                            UE->frame_parms.samples_per_subframe*10,
                                                            UE->frame_parms.nb_antennas_rx), "");
		AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
                instance_cnt_synch = ++UE->proc.instance_cnt_synch;
                if (instance_cnt_synch == 0) {
                    AssertFatal( 0 == pthread_cond_signal(&UE->proc.cond_synch), "");
                } else {
                    LOG_E( PHY, "[SCHED][UE] UE sync thread busy!!\n" );
                    exit_fun("nothing to add");
                }
		AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");
            } else {
#if OAISIM
              (void)dummy_rx; /* avoid gcc warnings */
              usleep(500);
#else
                // grab 10 ms of signal into dummy buffer
                if (UE->mode != loop_through_memory) {
                    for (int i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                        rxp[i] = (void*)&dummy_rx[i][0];
                    for (int sf=0; sf<10; sf++)
                        //	    printf("Reading dummy sf %d\n",sf);
                          UE->rfdevice.trx_read_func(&UE->rfdevice,
                                              &timestamp,
                                              rxp,
                                              UE->frame_parms.samples_per_subframe,
                                              UE->frame_parms.nb_antennas_rx);
                }
#endif
            }

        } // UE->is_synchronized==0
        else {
            if (start_rx_stream==0) {
                start_rx_stream=1;
                if (UE->mode != loop_through_memory) {
                    if (UE->no_timing_correction==0) {
                        LOG_I(PHY,"Resynchronizing RX by %d samples (mode = %d)\n",UE->rx_offset,UE->mode);
                        AssertFatal(UE->rx_offset ==
                                    UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                               &timestamp,
                                                               (void**)UE->common_vars.rxdata,
                                                               UE->rx_offset,
                                                               UE->frame_parms.nb_antennas_rx),"");
                    }
                    UE->rx_offset=0;
                    UE->time_sync_cell=0;
                    //UE->proc.proc_rxtx[0].frame_rx++;
                    //UE->proc.proc_rxtx[1].frame_rx++;
                    for (th_id=0; th_id < RX_NB_TH; th_id++) {
                        UE->proc.proc_rxtx[th_id].frame_rx++;
                    }

                    // read in first symbol
                    AssertFatal (UE->frame_parms.ofdm_symbol_size+UE->frame_parms.nb_prefix_samples0 ==
                                 UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                            &timestamp,
                                                            (void**)UE->common_vars.rxdata,
                                                            UE->frame_parms.ofdm_symbol_size+UE->frame_parms.nb_prefix_samples0,
                                                            UE->frame_parms.nb_antennas_rx),"");
851
                    nr_slot_fep(UE,0, 0, 0, 0, 0, NR_PBCH_EST);
852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068
                } //UE->mode != loop_through_memory
                else
                    rt_sleep_ns(1000*1000);

            } else {
                tti_nr++;
                tti_nr%=10*UE->frame_parms.ttis_per_subframe;
                UE_nr_rxtx_proc_t *proc = &UE->proc.proc_rxtx[thread_idx];
                // update thread index for received subframe
                UE->current_thread_id[tti_nr] = thread_idx;

                LOG_D(PHY,"Process TTI %d thread Idx %d \n", tti_nr, UE->current_thread_id[tti_nr]);

                thread_idx++;
                if(thread_idx>=RX_NB_TH)
                    thread_idx = 0;


                if (UE->mode != loop_through_memory) {
                    for (i=0; i<UE->frame_parms.nb_antennas_rx; i++)
                        rxp[i] = (void*)&UE->common_vars.rxdata[i][UE->frame_parms.ofdm_symbol_size+
                                 UE->frame_parms.nb_prefix_samples0+
                                 tti_nr*UE->frame_parms.samples_per_tti];
                    for (i=0; i<UE->frame_parms.nb_antennas_tx; i++)
                        txp[i] = (void*)&UE->common_vars.txdata[i][((tti_nr+2)%10*UE->frame_parms.ttis_per_subframe)*UE->frame_parms.samples_per_tti];

                    int readBlockSize, writeBlockSize;
                    if (tti_nr<(10*UE->frame_parms.ttis_per_subframe-1)) {
                        readBlockSize=UE->frame_parms.samples_per_tti;
                        writeBlockSize=UE->frame_parms.samples_per_tti;
                    } else {
                        // set TO compensation to zero
                        UE->rx_offset_diff = 0;
                        // compute TO compensation that should be applied for this frame
                        if ( UE->rx_offset < 5*UE->frame_parms.samples_per_subframe  &&
                                UE->rx_offset > 0 )
                            UE->rx_offset_diff = -1 ;
                        if ( UE->rx_offset > 5*UE->frame_parms.samples_per_subframe &&
                                UE->rx_offset < 10*UE->frame_parms.samples_per_tti )
                            UE->rx_offset_diff = 1;

                        LOG_D(PHY,"AbsSubframe %d.%d TTI SET rx_off_diff to %d rx_offset %d \n",proc->frame_rx,tti_nr,UE->rx_offset_diff,UE->rx_offset);
                        readBlockSize=UE->frame_parms.samples_per_tti -
                                      UE->frame_parms.ofdm_symbol_size -
                                      UE->frame_parms.nb_prefix_samples0 -
                                      UE->rx_offset_diff;
                        writeBlockSize=UE->frame_parms.samples_per_tti -
                                       UE->rx_offset_diff;
                    }

                    AssertFatal(readBlockSize ==
                                UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                           &timestamp,
                                                           rxp,
                                                           readBlockSize,
                                                           UE->frame_parms.nb_antennas_rx),"");
                    AssertFatal( writeBlockSize ==
                                 UE->rfdevice.trx_write_func(&UE->rfdevice,
                                         timestamp+
                                         (2*UE->frame_parms.samples_per_tti) -
                                         UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
                                         openair0_cfg[0].tx_sample_advance,
                                         txp,
                                         writeBlockSize,
                                         UE->frame_parms.nb_antennas_tx,
                                         1),"");
                    if( tti_nr==(10*UE->frame_parms.ttis_per_subframe-1)) {
                        // read in first symbol of next frame and adjust for timing drift
                        int first_symbols=writeBlockSize-readBlockSize;
                        if ( first_symbols > 0 )
                            AssertFatal(first_symbols ==
                                        UE->rfdevice.trx_read_func(&UE->rfdevice,
                                                                   &timestamp1,
                                                                   (void**)UE->common_vars.rxdata,
                                                                   first_symbols,
                                                                   UE->frame_parms.nb_antennas_rx),"");
                        if ( first_symbols <0 )
                            LOG_E(PHY,"can't compensate: diff =%d\n", first_symbols);
                    }
                    pickTime(gotIQs);
                    // operate on thread sf mod 2
                    AssertFatal(pthread_mutex_lock(&proc->mutex_rxtx) ==0,"");
                    if(tti_nr == 0) {
                        //UE->proc.proc_rxtx[0].frame_rx++;
                        //UE->proc.proc_rxtx[1].frame_rx++;
                        for (th_id=0; th_id < RX_NB_TH; th_id++) {
                            UE->proc.proc_rxtx[th_id].frame_rx++;
                        }
#ifdef SAIF_ENABLED
						if (!(proc->frame_rx%4000))
						{
							printf("frame_rx=%d rx_thread_busy=%ld - rate %8.3f\n",
								proc->frame_rx, g_ue_rx_thread_busy,
								(float)g_ue_rx_thread_busy/(proc->frame_rx*10+1)*100.0);
							fflush(stdout);
						}
#endif
                    }
                    //UE->proc.proc_rxtx[0].gotIQs=readTime(gotIQs);
                    //UE->proc.proc_rxtx[1].gotIQs=readTime(gotIQs);
                    for (th_id=0; th_id < RX_NB_TH; th_id++) {
                        UE->proc.proc_rxtx[th_id].gotIQs=readTime(gotIQs);
                    }
                    proc->nr_tti_rx=tti_nr;
                    proc->nr_tti_tx=(tti_nr+4)%(10*UE->frame_parms.ttis_per_subframe);
                    proc->subframe_rx=tti_nr>>((uint8_t)(log2 (UE->frame_parms.ttis_per_subframe)));
                    proc->frame_tx = proc->frame_rx + (proc->subframe_rx>5?1:0);
                    proc->subframe_tx=(proc->nr_tti_tx)>>((uint8_t)(log2 (UE->frame_parms.ttis_per_subframe)));
                    proc->timestamp_tx = timestamp+
                                         (4*UE->frame_parms.samples_per_tti)-
                                         UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0;

                    proc->instance_cnt_rxtx++;
                    LOG_D( PHY, "[SCHED][UE %d] UE RX instance_cnt_rxtx %d subframe %d !!\n", UE->Mod_id, proc->instance_cnt_rxtx,proc->subframe_rx);
                    if (proc->instance_cnt_rxtx == 0) {
                      if (pthread_cond_signal(&proc->cond_rxtx) != 0) {
                        LOG_E( PHY, "[SCHED][UE %d] ERROR pthread_cond_signal for UE RX thread\n", UE->Mod_id);
                        exit_fun("nothing to add");
                      }
                    } else {
#ifdef SAIF_ENABLED
						g_ue_rx_thread_busy++;
#endif
                      LOG_E( PHY, "[SCHED][UE %d] !! UE RX thread busy (IC %d)!!\n", UE->Mod_id, proc->instance_cnt_rxtx);
                      if (proc->instance_cnt_rxtx > 4)
                      {
                        char exit_fun_string[256];
                        sprintf(exit_fun_string,"[SCHED][UE %d] !!! UE instance_cnt_rxtx > 2 (IC %d) (Proc %d)!!",
                        			UE->Mod_id, proc->instance_cnt_rxtx,
                        			UE->current_thread_id[tti_nr]);
          				printf("%s\n",exit_fun_string);
          				fflush(stdout);
          				sleep(1);
                        exit_fun(exit_fun_string);
                      }
                    }

                    AssertFatal (pthread_cond_signal(&proc->cond_rxtx) ==0 ,"");
                    AssertFatal(pthread_mutex_unlock(&proc->mutex_rxtx) ==0,"");
//                    initRefTimes(t1);
//                    initStaticTime(lastTime);
//                    updateTimes(lastTime, &t1, 20000, "Delay between two IQ acquisitions (case 1)");
//                    pickStaticTime(lastTime);

                } else {
                    printf("Processing subframe %d",proc->subframe_rx);
                    getchar();
                }
            } // start_rx_stream==1
        } // UE->is_synchronized==1

    } // while !oai_exit
    return NULL;
}

/*!
 * \brief Initialize the UE theads.
 * Creates the UE threads:
 * - UE_thread_rxtx0
 * - UE_thread_rxtx1
 * - UE_thread_synch
 * - UE_thread_fep_slot0
 * - UE_thread_fep_slot1
 * - UE_thread_dlsch_proc_slot0
 * - UE_thread_dlsch_proc_slot1
 * and the locking between them.
 */
void init_UE_threads(PHY_VARS_NR_UE *UE) {
    struct nr_rxtx_thread_data *rtd;

    pthread_attr_init (&UE->proc.attr_ue);
    pthread_attr_setstacksize(&UE->proc.attr_ue,8192);//5*PTHREAD_STACK_MIN);

    pthread_mutex_init(&UE->proc.mutex_synch,NULL);
    pthread_cond_init(&UE->proc.cond_synch,NULL);

    // the threads are not yet active, therefore access is allowed without locking
    int nb_threads=RX_NB_TH;
    for (int i=0; i<nb_threads; i++) {
        rtd = calloc(1, sizeof(struct nr_rxtx_thread_data));
        if (rtd == NULL) abort();
        rtd->UE = UE;
        rtd->proc = &UE->proc.proc_rxtx[i];

        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_rxtx,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_rxtx,NULL);
        UE->proc.proc_rxtx[i].sub_frame_start=i;
        UE->proc.proc_rxtx[i].sub_frame_step=nb_threads;
        printf("Init_UE_threads rtd %d proc %d nb_threads %d i %d\n",rtd->proc->sub_frame_start, UE->proc.proc_rxtx[i].sub_frame_start,nb_threads, i);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_rxtx, NULL, UE_thread_rxn_txnp4, rtd);

#ifdef UE_DLSCH_PARALLELISATION
        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_dlsch_td,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_dlsch_td,NULL);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_dlsch_td,NULL,dlsch_decoding_2thread0, rtd);
        //thread 2
        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_dlsch_td1,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_dlsch_td1,NULL);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_dlsch_td1,NULL,dlsch_decoding_2thread1, rtd);
#endif

#ifdef UE_SLOT_PARALLELISATION
        //pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_slot0_dl_processing,NULL);
        //pthread_cond_init(&UE->proc.proc_rxtx[i].cond_slot0_dl_processing,NULL);
        //pthread_create(&UE->proc.proc_rxtx[i].pthread_slot0_dl_processing,NULL,UE_thread_slot0_dl_processing, rtd);

        pthread_mutex_init(&UE->proc.proc_rxtx[i].mutex_slot1_dl_processing,NULL);
        pthread_cond_init(&UE->proc.proc_rxtx[i].cond_slot1_dl_processing,NULL);
        pthread_create(&UE->proc.proc_rxtx[i].pthread_slot1_dl_processing,NULL,UE_thread_slot1_dl_processing, rtd);
#endif

    }
    pthread_create(&UE->proc.pthread_synch,NULL,UE_thread_synch,(void*)UE);
}


#ifdef OPENAIR2
1069
/*
1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095
void fill_ue_band_info(void) {

    UE_EUTRA_Capability_t *UE_EUTRA_Capability = UE_rrc_inst[0].UECap->UE_EUTRA_Capability;
    int i,j;

    bands_to_scan.nbands = UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.count;

    for (i=0; i<bands_to_scan.nbands; i++) {

        for (j=0; j<sizeof (eutra_bands) / sizeof (eutra_bands[0]); j++)
            if (eutra_bands[j].band == UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.array[i]->bandEUTRA) {
                memcpy(&bands_to_scan.band_info[i],
                       &eutra_bands[j],
                       sizeof(eutra_band_t));

                printf("Band %d (%lu) : DL %u..%u Hz, UL %u..%u Hz, Duplex %s \n",
                       bands_to_scan.band_info[i].band,
                       UE_EUTRA_Capability->rf_Parameters.supportedBandListEUTRA.list.array[i]->bandEUTRA,
                       bands_to_scan.band_info[i].dl_min,
                       bands_to_scan.band_info[i].dl_max,
                       bands_to_scan.band_info[i].ul_min,
                       bands_to_scan.band_info[i].ul_max,
                       (bands_to_scan.band_info[i].frame_type==FDD) ? "FDD" : "TDD");
                break;
            }
    }
1096
}*/
1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138
#endif

int setup_ue_buffers(PHY_VARS_NR_UE **phy_vars_ue, openair0_config_t *openair0_cfg) {

    int i, CC_id;
    LTE_DL_FRAME_PARMS *frame_parms;
    openair0_rf_map *rf_map;

    for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
        rf_map = &phy_vars_ue[CC_id]->rf_map;

        AssertFatal( phy_vars_ue[CC_id] !=0, "");
        frame_parms = &(phy_vars_ue[CC_id]->frame_parms);

        // replace RX signal buffers with mmaped HW versions
        rxdata = (int32_t**)malloc16( frame_parms->nb_antennas_rx*sizeof(int32_t*) );
        txdata = (int32_t**)malloc16( frame_parms->nb_antennas_tx*sizeof(int32_t*) );

        for (i=0; i<frame_parms->nb_antennas_rx; i++) {
            LOG_I(PHY, "Mapping UE CC_id %d, rx_ant %d, freq %u on card %d, chain %d\n",
                  CC_id, i, downlink_frequency[CC_id][i], rf_map->card, rf_map->chain+i );
            free( phy_vars_ue[CC_id]->common_vars.rxdata[i] );
            rxdata[i] = (int32_t*)malloc16_clear( 307200*sizeof(int32_t) );
            phy_vars_ue[CC_id]->common_vars.rxdata[i] = rxdata[i]; // what about the "-N_TA_offset" ? // N_TA offset for TDD
        }

        for (i=0; i<frame_parms->nb_antennas_tx; i++) {
            LOG_I(PHY, "Mapping UE CC_id %d, tx_ant %d, freq %u on card %d, chain %d\n",
                  CC_id, i, downlink_frequency[CC_id][i], rf_map->card, rf_map->chain+i );
            free( phy_vars_ue[CC_id]->common_vars.txdata[i] );
            txdata[i] = (int32_t*)malloc16_clear( 307200*sizeof(int32_t) );
            phy_vars_ue[CC_id]->common_vars.txdata[i] = txdata[i];
        }

        // rxdata[x] points now to the same memory region as phy_vars_ue[CC_id]->common_vars.rxdata[x]
        // txdata[x] points now to the same memory region as phy_vars_ue[CC_id]->common_vars.txdata[x]
        // be careful when releasing memory!
        // because no "release_ue_buffers"-function is available, at least rxdata and txdata memory will leak (only some bytes)
    }
    return 0;
}