build_oai 35.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979
#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

# file build_oai
# brief OAI automated build tool that can be used to install, compile, run OAI.
# author  Navid Nikaein, Lionel GAUTHIER, Laurent Thomas

set -e

################################
# include helper functions
################################
ORIGIN_PATH=$PWD
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/tools/build_helper

# set environment variables (OPENAIR_HOME, ...)
set_openair_env

#variables for UE data generation
gen_nvram_path=$OPENAIR_DIR/targets/bin
conf_nvram_path=$OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf

MSC_GEN=0
XFORMS="True"
UE_EXPANSION="False"
UESIM_EXPANSION="False"
PRINT_STATS="False"
VCD_TIMING="False"
DEADLINE_SCHEDULER_FLAG_USER="False"
FORCE_DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="False" #Only valid when lowlatecy flag is set to False
REL="Rel14"
HW="None"
TP="None"
NOS1=0
EPC=0
VERBOSE_COMPILE=0
CFLAGS_PROCESSOR_USER=""
RUN_GROUP=0
TEST_CASE_GROUP=""
BUILD_DOXYGEN=0
T_TRACER="True"
DISABLE_HARDWARE_DEPENDENCY="False"
CMAKE_BUILD_TYPE=""
CMAKE_CMD="$CMAKE"
UE_AUTOTEST_TRACE="False"
UE_DEBUG_TRACE="False"
UE_TIMING_TRACE="False"
DISABLE_LOG_X="False"
USRP_REC_PLAY="False"
BUILD_ECLIPSE=0
UE_NAS_USE_TUN="False"
UETARGET="False"
BASIC_SIMULATOR=0
trap handle_ctrl_c INT

function print_help() {
  echo_info "
This program installs OpenAirInterface Software
You should have ubuntu 14.xx, updated, and the Linux kernel >= 3.14
Options
-h
   This help
-c | --clean
   Erase all files to make a rebuild from start
-C | --clean-all
   Erase all files made by previous compilations, installations
--clean-kernel
   Erase previously installed features in kernel: iptables, drivers, ...
-I | --install-external-packages
   Installs required packages such as LibXML, asn1.1 compiler, freediameter, ...
   This option will require root password
--install-optional-packages
   Install useful but not mandatory packages such as valgrind
-g | --run-with-gdb
   Add debugging symbols to compilation directives. It also disables any compiler optimization. Only for debugging. Do not use in normal operation!
-h | --help
   Print this help
--eNB
   Makes the LTE softmodem
--UE
   Makes the UE specific parts (ue_ip, usim, nvram) from the given configuration file
--UE-conf-nvram [configuration file]
   Specify conf_nvram_path (default \"$conf_nvram_path\")
--UE-gen-nvram [output path]
   Specify gen_nvram_path (default \"$gen_nvram_path\")
-a | --agent
   Enables agent for software-defined control of the eNB
-r | --3gpp-release
   default is Rel14,
   Rel8 limits the implementation to 3GPP Release 8 version
   Rel10 limits the implementation to 3GPP Release 10 version
-w | --hardware
   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, IRIS, None (Default)
   Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol
   ETHERNET , None
   Adds this trasport protocol support in compilation
--phy_simulators
   Makes the unitary tests Layer 1 simulators
--core_simulators
   Makes the core security features unitary simulators
-s | --check
   runs a set of auto-tests based on simulators and several compilation tests
--run-group 
   runs only specified test cases specified here. This flag is only valid with -s
-V | --vcd
   Adds a debgging facility to the binary files: GUI with major internal synchronization events
-x | --xforms
   Adds a software oscilloscope feature to the produced binaries. 
--install-system-files
   Install OpenArInterface required files in Linux system
   (will ask root password)
--noS1 
   Compiles lte-softmodem without S1 interface, using direct link to IP instead
--verbose-compile
   Shows detailed compilation instructions in makefile
--cflags_processor
   Manually Add CFLAGS of processor if they are not detected correctly by script. Only add these flags if you know your processor supports them. Example flags: -msse3 -msse4.1 -msse4.2 -mavx2
--build-doxygen
   Builds doxygen based documentation.
--disable-deadline
   Disables deadline scheduler of Linux kernel (>=3.14.x).
--enable-deadline
   Enable deadline scheduler of Linux kernel (>=3.14.x). 
--disable-cpu-affinity
   Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
--disable-T-Tracer
   Disables the T tracer.
--disable-hardware-dependency
   Disable HW dependency during installation
--ue-autotest-trace
    Enable specific traces for UE autotest framework
--ue-trace
    Enable traces for UE debugging
--ue-timing
    Enable traces for timing
--disable-log
   Disable all LOG_* macros
--build-eclipse
   Build eclipse project files. Paths are auto corrected by fixprj.sh
--build-telnet
   Build telnet server, specify --telnetsrv on command line to start it (eNB only)
--build-msc
   Build MSC tracing utility, specify --msc on command line to start it (eNB and UE)
--usrp-recplay
   Build for I/Q record-playback modes
--ue-nas-use-tun
   Use TUN devices for the UEs instead of ue_ip.ko
--basic-simulator
   Generates a basic [1 UE + 1 eNB + no channel] simulator.
   See targets/ARCH/tcp_bridge/README.tcp_bridge_oai for documentation.
Usage (first build):
 NI/ETTUS B201  + COTS UE : ./build_oai -I  --eNB -x --install-system-files -w USRP
Usage (Regular):
 Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x 
 NI/ETTUS B201  + OAI ENB : ./build_oai --eNB -x -w USRP"
}


function main() {

  until [ -z "$1" ]
  do
    case "$1" in
       -c | --clean)
            CLEAN=1
            shift;;
       -C | --clean-all)
            CLEAN_ALL=1
            shift;;
       --clean-kernel)
            clean_kernel
            echo_info "Erased iptables config and removed modules from kernel"
            shift;;
       -I | --install-external-packages)
            INSTALL_EXTERNAL=1
            echo_info "Will install external packages"
            shift;;
       --install-optional-packages)
            INSTALL_OPTIONAL=1
            echo_info "Will install optional packages"
            shift;;
       -g | --run-with-gdb)
            GDB=1
            CMAKE_BUILD_TYPE="Debug"
            echo_info "Will Compile with gdb symbols and disable compiler optimization"
            CMAKE_CMD="$CMAKE_CMD -DCMAKE_BUILD_TYPE=Debug --trace-expand"
            shift;;
       --eNB)
            eNB=1
            echo_info "Will compile eNB"
            shift;;
       -a | --agent)
	    echo_info "FlexRAN support is always compiled into the eNB"
	    shift;;
       --UE)
            UE=1
            UETARGET="True"
            echo_info "Will compile UE"
            shift;;
       --mu)
            UE_EXPANSION="True"
            echo_info "Will compile with UE_EXPANSION"
            shift;;
       --musim)
            UESIM_EXPANSION="True"
            echo_info "Will compile with UESIM_EXPANSION"
            shift;;
       --UE-conf-nvram)
            conf_nvram_path=$(readlink -f $2)
            shift 2;;
        --UE-gen-nvram)
            gen_nvram_path=$(readlink -f $2)
            shift 2;;
       -r | --3gpp-release)
            REL=$2
            echo_info "Setting release to: $REL"
            shift 2;;
       -w | --hardware)
            HW="$2" #"${i#*=}"
            # Use OAI_USRP  as the key word USRP is used inside UHD driver           
            if [ "$HW" != "BLADERF" -a  "$HW" != "USRP" -a "$HW" != "LMSSDR" -a  "$HW" != "None" -a  "$HW" != "EXMIMO" -a  "$HW" != "IRIS"  ] ; then
		echo_fatal "Unknown HW type $HW will exit..."		
	    else
		if [ "$HW" == "USRP" ] ; then 
		    HW="OAI_USRP"
		fi 
		if [ "$HW" == "BLADERF" ] ; then 
		    HW="OAI_BLADERF"
		fi
		if [ "$HW" == "LMSSDR" ] ; then 
		    HW="OAI_LMSSDR"
		fi 
                if [ "$HW" == "IRIS" ] ; then
                    HW="OAI_IRIS"
                fi
		echo_info "Setting hardware to: $HW"
	    fi
            shift 2;;
	-t | --transport_protocol)
            TP="$2" #"${i#*=}"
	    if [ "$TP" != "ETHERNET" -a "$TP" != "None" ] ; then 
		echo_fatal "Unknown TP type $TP will exit..."		
	    else
		echo_info "Setting transport protocol to: $TP"		
	    fi
            shift 2;;
       --phy_simulators)
            SIMUS_PHY=1
            echo_info "Will compile dlsim, ulsim, ..."
            shift;;
       --core_simulators)
            SIMUS_CORE=1
            echo_info "Will compile security unitary tests"
            shift;;
       -s | --check)
            OAI_TEST=1
            echo_info "Will run auto-tests"
            shift;;
       --run-group)
            RUN_GROUP=1
            TEST_CASE_GROUP=$2
            echo_info "executing test cases only in group: $TEST_CASE_GROUP"
            shift 2;;
       -V | --vcd)
            echo_info "Setting gtk-wave output"
            VCD_TIMING=1
            EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
            shift;;
       -x | --xforms)
            XFORMS="True"
            EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
            echo_info "Will generate the software oscilloscope features"
            shift;;
       --install-system-files)
            INSTALL_SYSTEM_FILES=1
            echo_info "Will copy OpenAirInterface files in Linux directories"
            shift;;
       --noS1)
	    NOS1=1
            echo_info "Will compile without S1 interface"
            shift;;
       --verbose-compile)
	    VERBOSE_COMPILE=1
            echo_info "Will compile with verbose instructions"
            shift;;
       --cflags_processor)
            CFLAGS_PROCESSOR_USER=$2
            echo_info "Setting CPU FLAGS from USER to: $CFLAGS_PROCESSOR_USER"
            shift 2;;
       --build-doxygen)
	    BUILD_DOXYGEN=1
            echo_info "Will build doxygen support"
            shift;;     
       --disable-deadline)
            FORCE_DEADLINE_SCHEDULER_FLAG_USER="False"
            echo_info "Disabling the usage of deadline scheduler"
            shift 1;;
       --enable-deadline)
            FORCE_DEADLINE_SCHEDULER_FLAG_USER="True"
            echo_info "Enabling the usage of deadline scheduler"
            shift 1;;
       --disable-cpu-affinity)
            CPU_AFFINITY_FLAG_USER="False"
            echo_info "Disabling CPU Affinity (only valid when not using deadline scheduler)"
            shift 1;;
       --disable-T-Tracer)
            T_TRACER="False"
            echo_info "Disabling the T tracer"
            shift 1;;
       --disable-hardware-dependency)
            echo_info "Disabling hardware dependency for compiling software"
            DISABLE_HARDWARE_DEPENDENCY="True"
            shift 1;;
        --ue-autotest-trace)
            UE_AUTOTEST_TRACE="True"
            echo_info "Enabling autotest specific trace for UE"
            shift 1;;
        --ue-trace)
            UE_DEBUG_TRACE="True"
            echo_info "Enabling UE trace for debug"
            shift 1;;
        --ue-timing)
            UE_TIMING_TRACE="True"
            echo_info "Enabling UE timing trace"
            shift 1;;
        --disable-log)
            DISABLE_LOG_X="True"
            echo_info "Disabling all LOG_* traces"
            shift 1;;
        --uhd-images-dir)
            UHD_IMAGES_DIR=$2
            echo_info "Downloading UHD images in the indicated location"
            shift 2;;
       --build-eclipse)
            BUILD_ECLIPSE=1
            CMAKE_CMD="$CMAKE_CMD"' -DCMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT=TRUE -G"Eclipse CDT4 - Unix Makefiles"'
            echo_info "Enabling build eclipse project support"
            shift 1;;
       --build-telnetsrv)
            BUILD_TELNETSRV=1
            echo_info "Build embedded telnet server"
            shift ;;
       --build-msc)
            MSC_GEN=1
            echo_info "Build MSC tracing utility"
            shift ;;			
        --usrp-recplay)
            USRP_REC_PLAY="True"
            echo_info "Enabling USRP record playback mode"
            shift 1;;
        --ue-nas-use-tun)
            UE_NAS_USE_TUN="True"
            echo_info "Enabling UE NAS TUN device usage instead of ue_ip.ko"
            shift 1;;
        --basic-simulator)
            BASIC_SIMULATOR=1
            echo_info "Compiling the basic simulator"
            shift 1;;
        -h | --help)
            print_help
            exit 1;;
	*)
	    print_help
            echo_fatal "Unknown option $1"
            break;;
   esac
  done
  
  CMAKE_CMD="$CMAKE_CMD .."
  echo_info "CMAKE_CMD=$CMAKE_CMD"
  if [ "$eNB" = "1" ] && [ "$UE" = "1" ]; then
    echo_error "Cannot build UE and eNB on one build_oai execution"
    echo_error "use 2 build_oai invocations"
    exit
  fi  
  #########################################################
  # check validity of HW and TP parameters for eNB
  #########################################################
  # to be discussed
  
  if [ "$eNB" = "1" ] ; then
      if [ "$HW" = "None" -a  "$TP" = "None" ] ; then
	  echo_fatal "Define a local radio head (e.g. -w EXMIMO) or a transport protocol (e.g. -t ETHERNET) to communicate with a remote radio head!"
      fi
      if [ "$HW" = "None" ] ; then 
	  echo_info "No radio head has been selected (HW set to $HW)"	
      fi
      if [ "$TP" = "None" ] ; then
	  echo_info "No transport protocol has been selected (TP set to $TP)"	
      fi
  fi
  
  echo_info "RF HW set to $HW" 
  #Now we set flags to enable deadline scheduler settings
  #By default: USRP: disable, 
  #By default: BLADERF: enable,
  #By default: EXMIMO: enable
  if [ "$FORCE_DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then
     if [ "$HW" = "EXMIMO" ] ; then 
        DEADLINE_SCHEDULER_FLAG_USER="True"
     elif [ "$HW" = "ETHERNET" ] ; then 
        DEADLINE_SCHEDULER_FLAG_USER="False"
     elif [ "$HW" = "OAI_USRP" ] ; then 
        DEADLINE_SCHEDULER_FLAG_USER="False"
     elif [ "$HW" = "OAI_BLADERF" ] ; then 
        DEADLINE_SCHEDULER_FLAG_USER="False"
     elif [ "$HW" = "OAI_LMSSDR" ] ; then
        DEADLINE_SCHEDULER_FLAG_USER="False"
     elif [ "$HW" = "OAI_IRIS" ] ; then
        DEADLINE_SCHEDULER_FLAG_USER="False"
     elif [ "$HW" = "None" ] ; then 
        DEADLINE_SCHEDULER_FLAG_USER="False"
     else 
        echo_error "Unknown HW type $HW. Exiting now..."
        exit 
     fi
  else
     DEADLINE_SCHEDULER_FLAG_USER=$FORCE_DEADLINE_SCHEDULER_FLAG_USER
  fi

  #Disable CPU Affinity for deadline scheduler
  if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "True" ] ; then 
     CPU_AFFINITY_FLAG_USER="False"
  fi

  echo_info "Flags for Deadline scheduler: $DEADLINE_SCHEDULER_FLAG_USER"
  echo_info "Flags for CPU Affinity: $CPU_AFFINITY_FLAG_USER"

  if [ -n "$UHD_IMAGES_DIR" ] && [ -z "$INSTALL_EXTERNAL" ]; then
    echo_error "UHD images download settings will not be applied without -I present"
    exit
  fi
  ############################################
  # setting and printing OAI envs, we should check here
  ############################################

  echo_info "2. Setting the OAI PATHS ..."

  cecho "OPENAIR_DIR    = $OPENAIR_DIR" $green

  # for conf files copy in this bash script
  if [ -d /usr/lib/freeDiameter ]; then
    export FREEDIAMETER_PREFIX=/usr
  else
    if [ -d /usr/local/lib/freeDiameter ]; then
      export FREEDIAMETER_PREFIX=/usr/local
    else
      echo_warning "FreeDiameter prefix not found, install freeDiameter if EPC, HSS"
    fi
  fi


  if [ "$CLEAN_ALL" = "1" ] ; then
    clean_all_files
    echo_info "Erased all previously producted files"
  fi

  dbin=$OPENAIR_DIR/targets/bin
  dlog=$OPENAIR_DIR/cmake_targets/log
  mkdir -p $dbin $dlog

  if [ "$INSTALL_EXTERNAL" = "1" ] ; then
    echo_info "Installing packages"
    check_install_oai_software
    if [ "$HW" == "OAI_USRP" ] ; then
      echo_info "installing packages for USRP support"
      check_install_usrp_uhd_driver
      if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
        install_usrp_uhd_driver $UHD_IMAGES_DIR
      fi
    fi 
    if [ "$HW" == "OAI_BLADERF" ] ; then
      echo_info "installing packages for BLADERF support"
      check_install_bladerf_driver
      if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
        flash_firmware_bladerf
      fi
    fi
    if [ "$HW" == "OAI_IRIS" ] ; then
      echo_info "installing packages for IRIS support"
      check_install_soapy
      #if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
      #  flash_firmware_iris
      #fi
    fi
    echo_info "installing protobuf/protobuf-c for flexran agent support"
    install_protobuf_from_source
    install_protobuf_c_from_source
  fi

  if [ "$INSTALL_OPTIONAL" = "1" ] ; then
    echo_info "Installing optional packages"
    check_install_additional_tools
  fi

  
  
  echo_info "3. building the compilation directives ..."

  DIR=$OPENAIR_DIR/cmake_targets
  if [ "$NOS1" =  "1" ] ; then
      lte_build_dir=lte_noS1_build_oai
      if [ "$eNB" = "1" ] ; then
         lte_exec=lte-softmodem-nos1
      fi
      if [ "$UE" = "1" ] ; then
         lte_exec=lte-uesoftmodem-nos1
      fi
  else
      lte_build_dir=lte_build_oai
      if [ "$eNB" = "1" ] ; then
         lte_exec=lte-softmodem
      fi
      if [ "$UE" = "1" ] ; then
         lte_exec=lte-uesoftmodem
      fi
  fi
  if [ "$T_TRACER" =  "False" ] ; then
      lte_build_dir=${lte_build_dir}_noLOG
  fi
# configuration module libraries, one currently available, using libconfig 
  config_libconfig_shlib=params_libconfig
  
  # first generate the CMakefile in the right directory
  if [ "$eNB" = "1" -o "$UE" = "1" -o "$HW" = "EXMIMO" ] ; then

    # LTE softmodem compilation
    [ "$CLEAN" = "1" ] && rm -rf $DIR/$lte_build_dir/build
    mkdir -p $DIR/$lte_build_dir/build
    cmake_file=$DIR/$lte_build_dir/CMakeLists.txt
    echo "cmake_minimum_required(VERSION 2.8)"   >  $cmake_file
#    if [ "$NOS1" = "1" ] ; then
#	cat  $DIR/$lte_build_dir/CMakeLists.template >>  $cmake_file
#    fi
    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
    echo "set ( XFORMS $XFORMS )"                  >>  $cmake_file
    echo "set ( UE_EXPANSION $UE_EXPANSION )"      >>  $cmake_file
#    echo "set ( PHY_TX_THREAD $UE_EXPANSION )"     >>  $cmake_file
    echo "set ( PRE_SCD_THREAD $UE_EXPANSION )"    >>  $cmake_file
    echo "set ( UESIM_EXPANSION $UESIM_EXPANSION )"      >>  $cmake_file
    echo "set ( RRC_ASN1_VERSION \"${REL}\")"      >>  $cmake_file
    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"     >>  $cmake_file
    echo "set ( RF_BOARD \"${HW}\")"               >>  $cmake_file
    echo "set ( TRANSP_PRO \"${TP}\")"             >>  $cmake_file
    echo "set(PACKAGE_NAME \"${lte_exec}\")"       >>  $cmake_file
    echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )"    >>$cmake_file
    echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )"      >>$cmake_file
    echo "set ( T_TRACER $T_TRACER )"              >>  $cmake_file
    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"        >>  $cmake_file
    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"        >>  $cmake_file
    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"        >>  $cmake_file
    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"        >>  $cmake_file
    if [ "$UE" = 1 ] ; then
       echo "set (UETARGET $UETARGET )"                   >> $cmake_file
    fi
    if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
     echo_info "Compiling UE S1 build : enabling Linux and NETLINK"
     echo "set (LINUX True )"              >>  $cmake_file
     echo "set (PDCP_USE_NETLINK True )"   >>  $cmake_file
    fi
    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
    cd  $DIR/$lte_build_dir/build
    eval $CMAKE_CMD
  fi

  if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
    echo_info "Compiling $lte_exec"
    compilations \
	  $lte_build_dir $lte_exec \
	  $lte_exec $dbin/$lte_exec.$REL

# mandatory shared lib
    compilations \
	  $lte_build_dir $config_libconfig_shlib \
	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
    compilations \
          $lte_build_dir coding \
          libcoding.so $dbin/libcoding.so
	  
    if [ "$NOS1" = "1" ] ; then
	compilations \
	    $lte_build_dir nasmesh \
	    CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
	compilations \
	    $lte_build_dir rb_tool \
	    rb_tool $dbin/rb_tool
	cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
    fi
  fi

  if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
    # ue_ip driver compilation
    echo_info "Compiling UE specific part"
    compilations \
      $lte_build_dir ue_ip \
      CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko

#    mkdir -p $DIR/at_commands/build
#    cd $DIR/at_commands/build
#    eval $CMAKE_CMD
#    compilations \
#      at_commands at_nas_ue \
#      at_nas_ue $dbin/at_nas_ue
    
    [ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
    mkdir -p $DIR/nas_sim_tools/build
    cd $DIR/nas_sim_tools/build
    
    eval $CMAKE_CMD
    compilations \
      nas_sim_tools usim \
      usim $dbin/usim
    compilations \
      nas_sim_tools nvram \
      nvram $dbin/nvram
    compilations \
        nas_sim_tools conf2uedata \
        conf2uedata $dbin/conf2uedata

    # generate USIM data
    if [ -f $dbin/conf2uedata ]; then
      install_nas_tools $conf_nvram_path $gen_nvram_path
      echo_info "Copying UE specific part to $DIR/$lte_build_dir/build"
      cp -Rvf $dbin/.ue_emm.nvram0 $DIR/$lte_build_dir/build
      cp -Rvf $dbin/.ue.nvram0 $DIR/$lte_build_dir/build
      cp -Rvf $dbin/.usim.nvram0 $DIR/$lte_build_dir/build
    else
      echo_warning "not generated UE NAS files: binaries not found"
    fi
  fi

  if [ "$SIMUS_PHY" = "1" -o "$SIMUS_CORE" = "1" ] ; then
    cd $OPENAIR_DIR/cmake_targets/lte-simulators
    [ "$CLEAN" = "1" ] && rm -rf build
    mkdir -p build
    cd build
    rm -f *sim
    eval $CMAKE_CMD
  fi

  if [ "$SIMUS_PHY" = "1" ] ; then
    # lte unitary simulators compilation
    echo_info "Compiling unitary tests simulators"
    # TODO: fix: dlsim_tm4 pucchsim prachsim pdcchsim pbchsim mbmssim
    #simlist="dlsim_tm4 dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
    simlist="dlsim ulsim"
    for f in $simlist ; do
      compilations \
      lte-simulators $f \
	  $f $dbin/$f.$REL
    done
    compilations \
          lte-simulators coding \
          libcoding.so $dbin/libcoding.so
#    compilations \
#	  lte-simulators $config_libconfig_shlib \
#	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
  fi

  # Core simulators
  #############
  if [ "$SIMUS_CORE" = "1" ] ; then
    # lte unitary simulators compilation
    echo_info "Compiling unitary tests simulators"
    simlist="secu_knas_encrypt_eia1 secu_kenb aes128_ctr_encrypt aes128_ctr_decrypt secu_knas_encrypt_eea2 secu_knas secu_knas_encrypt_eea1 kdf aes128_cmac_encrypt secu_knas_encrypt_eia2"
    for f in $simlist ; do
      compilations \
	  lte-simulators test_$f \
	  test_$f $dbin/test_$f.$REL
    done
  fi

  # EXMIMO drivers & firmware loader
  ###############
  if [ "$HW" = "EXMIMO" ] ; then
    
    echo_info "Compiling Express MIMO 2 board drivers"
    compilations \
        $lte_build_dir openair_rf \
        CMakeFiles/openair_rf/openair_rf.ko $dbin/openair_rf.ko
    compilations \
	  $lte_build_dir updatefw \
	  updatefw $dbin/updatefw
    echo_info "Compiling oarf tools. The logfile for compilation is here: $dlog/oarf.txt"
    make -C $OPENAIR_DIR/cmake_targets/$lte_build_dir/build oarf > $dlog/oarf.txt 2>&1
    cp $OPENAIR_DIR/cmake_targets/$lte_build_dir/build/*.oct $dbin
    if [ -s $dbin/oarf_config_exmimo.oct ] ; then
	echo_success "oarf tools compiled"
    else
	echo_error "oarf tools compilation failed"
    fi
    cp $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 $dbin
  fi



  # Telnet server compilation
  #####################
  if [ "$BUILD_TELNETSRV" = "1" ] ; then
              build_dir=$lte_build_dir
              compilations \
                  $build_dir telnetsrv \
                  libtelnetsrv.so $dbin/libtelnetsrv.so

  fi 
  # Telnet server compilation
  #####################
  if [ "$MSC_GEN" = "1" ] ; then
              build_dir=$lte_build_dir
              compilations \
                  $build_dir msc \
                  libmsc.so $dbin/libmsc.so

  fi  
  # build RF device and transport protocol libraries
  #####################################
  if [ "$eNB" = "1" -o "$UE" = "1" ] ; then

      build_dir=$lte_build_dir	  

      # build RF device libraries
      if [ "$HW" != "None" ] ; then
	  rm -f liboai_device.so
	  rm -f $dbin/liboai_device.so

	  # link liboai_device.so with the selected RF device library
	  if [ "$HW" == "EXMIMO" ] ; then
	      compilations \
		  $build_dir oai_exmimodevif \
		  liboai_exmimodevif.so $dbin/liboai_exmimodevif.so.$REL

	      ln -sf liboai_exmimodevif.so liboai_device.so
	      ln -sf $dbin/liboai_exmimodevif.so.$REL $dbin/liboai_device.so
	      echo_info "liboai_device.so is linked to EXMIMO device library"       
	  elif [ "$HW" == "OAI_USRP" ] ; then
              compilations \
                  $build_dir oai_usrpdevif \
                  liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL

	      ln -sf liboai_usrpdevif.so liboai_device.so
	      ln -sf $dbin/liboai_usrpdevif.so.$REL $dbin/liboai_device.so
	      echo_info "liboai_device.so is linked to USRP device library"        
	  elif [ "$HW" == "OAI_BLADERF" ] ; then
	      if [ -f "/usr/include/libbladeRF.h" ] ; then
		  compilations \
		      $build_dir oai_bladerfdevif \
		      liboai_bladerfdevif.so $dbin/liboai_bladerfdevif.so.$REL
	      fi

	      ln -sf liboai_bladerfdevif.so liboai_device.so
	      ln -sf $dbin/liboai_bladerfdevif.so.$REL $dbin/liboai_device.so
	      echo_info "liboai_device.so is linked to BLADERF device library"	 
	  elif [ "$HW" == "OAI_LMSSDR" ] ; then
#	      if [ -f "/usr/include/libbladeRF.h" ] ; then
		  compilations \
		      $build_dir oai_lmssdrdevif \
		      liboai_lmssdrdevif.so $dbin/liboai_lmssdrdevif.so.$REL
#	      fi

	      ln -sf liboai_lmssdrdevif.so liboai_device.so
	      ln -sf $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
	      echo_info "liboai_device.so is linked to LMSSDR device library"	 
          elif [ "$HW" == "OAI_IRIS" ] ; then
                  compilations \
                      $build_dir oai_irisdevif \
                      liboai_irisdevif.so $dbin/liboai_irisdevif.so.$REL

              ln -s liboai_irisdevif.so liboai_device.so
              ln -s $dbin/liboai_irisdevif.so.$REL $dbin/liboai_device.so
              echo_info "liboai_device.so is linked to IRIS device library"
	  else 
	      echo_info "liboai_device.so is not linked to any device library"	    
	  fi
      fi
      
      # build trasport protocol libraries (currently only ETHERNET is available)
      if [ "$TP" != "None" ] ; then
	  rm -f liboai_transpro.so
	  rm -f $dbin/liboai_transpro.so

	  if [ "$TP" == "ETHERNET" ] ; then
	      compilations \
		  $build_dir oai_eth_transpro \
		  liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
	      ln -sf liboai_eth_transpro.so liboai_transpro.so
	      ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
	      echo_info "liboai_transpro.so is linked with ETHERNET library"	 
	  fi      
      fi
fi


  # Doxygen Support
  #####################
  if [ "$BUILD_DOXYGEN" = "1" ] ;then
    doxygen_log=$OPENAIR_DIR/cmake_targets/log/doxygen.log
    echo_info "Building doxygen based documentation. The documentation file is located here: $OPENAIR_DIR/targets/DOCS/html/index.html"
    echo_info "Doxygen Generation log is located here: $doxygen_log"
    echo_info "Generating doxygen files....please wait"
    (
    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/doxygen/build
    mkdir -p $OPENAIR_DIR/cmake_targets/doxygen/build
    cd $OPENAIR_DIR/cmake_targets/doxygen/build
    eval $CMAKE_CMD
    make doc
    ) >& $doxygen_log
  fi

  # Auto-tests
  #####################
  if [ "$OAI_TEST" = "1" ]; then
    echo_info "10. Running OAI pre commit tests (pre-ci) ..."
    echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt"
    echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt"
    echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL"
    echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL "
    echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log "
    echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
    echo_info "You can hit CTRL-C any time to terminate the autotests..."
    echo "Current User Name: $USER"
    read -s -p "Enter Password: " mypassword
    echo -e "\n"
    rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
    mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
    if [ "$RUN_GROUP" -eq "1" ]; then
        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
    else
        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
    fi
    wait
  else
    echo_info "10. Bypassing the Tests ..."
  fi

  # basic simulator
  #####################
  if [ "$BASIC_SIMULATOR" = "1" ]; then
    echo_info "Build basic simulator"
    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/basic_simulator
    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator
    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/enb
    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/ue
    mkdir -p $OPENAIR_DIR/cmake_targets/nas_sim_tools/build

    # enb

    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/enb/CMakeLists.txt
    echo "cmake_minimum_required(VERSION 2.8)"         >  $cmake_file
    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )"  >> $cmake_file
    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
    echo "set ( RRC_ASN1_VERSION \"${REL}\")"          >>  $cmake_file
    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"         >>  $cmake_file
    echo "set ( XFORMS $XFORMS )"                      >>  $cmake_file
    echo "set ( RF_BOARD \"OAI_USRP\")"                >>  $cmake_file
    echo "set ( TRANSP_PRO \"None\")"                  >>  $cmake_file
    echo "set(PACKAGE_NAME \"simulator_enb\")"         >>  $cmake_file
    echo "set (DEADLINE_SCHEDULER \"False\" )"         >>  $cmake_file
    echo "set (CPU_AFFINITY \"False\" )"               >>  $cmake_file
    echo "set ( T_TRACER \"True\" )"                   >>  $cmake_file
    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"  >>  $cmake_file
    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"      >>  $cmake_file
    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"          >>  $cmake_file
    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"          >>  $cmake_file
    echo "set (BASIC_SIMULATOR \"True\" )"             >>  $cmake_file
    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file

    echo_info "Build eNB"
    echo_info "logs are in $dlog/basic_simulator_enb.txt"
    set +e
    {
      cd $OPENAIR_DIR/cmake_targets/basic_simulator/enb
      cmake .
      make -j`nproc` lte-softmodem
      make -j`nproc` coding params_libconfig tcp_bridge_oai
      ln -sf libtcp_bridge_oai.so liboai_device.so
      cd ../..
    } > $dlog/basic_simulator_enb.txt 2>&1
    set -e
    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/lte-softmodem          -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libcoding.so           -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libparams_libconfig.so -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libtcp_bridge_oai.so ] ; then
      echo_success "eNB compiled"
      check_warnings "$dlog/basic_simulator_enb.txt"
    else
      echo_error "eNB compilation failed"
      exit 1
    fi

    # ue

    echo_info "Compile conf2uedata"
    cd $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
    eval $CMAKE_CMD
    compilations \
        nas_sim_tools conf2uedata \
        conf2uedata $dbin/conf2uedata

    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/ue/CMakeLists.txt
    echo "cmake_minimum_required(VERSION 2.8)"        >  $cmake_file
    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
    echo "set ( RRC_ASN1_VERSION \"${REL}\")"         >>  $cmake_file
    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"        >>  $cmake_file
    echo "set ( XFORMS $XFORMS )"                     >>  $cmake_file
    echo "set ( RF_BOARD \"OAI_USRP\")"               >>  $cmake_file
    echo "set ( TRANSP_PRO \"None\")"                 >>  $cmake_file
    echo "set(PACKAGE_NAME \"simulator_ue\")"         >>  $cmake_file
    echo "set (DEADLINE_SCHEDULER \"False\" )"        >>  $cmake_file
    echo "set (CPU_AFFINITY \"False\" )"              >>  $cmake_file
    echo "set ( T_TRACER \"True\" )"                  >>  $cmake_file
    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)" >>  $cmake_file
    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"       >>  $cmake_file
    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"     >>  $cmake_file
    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"         >>  $cmake_file
    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"         >>  $cmake_file
    echo "set (LINUX True )"                          >>  $cmake_file
    echo "set (PDCP_USE_NETLINK True )"               >>  $cmake_file
    echo "set (UETARGET True )"                       >>  $cmake_file
    echo "set (BASIC_SIMULATOR \"True\" )"            >>  $cmake_file
#    echo "set (UE_NAS_USE_TUN \"True\" )"             >>  $cmake_file
    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file

    echo_info "Build UE"
    echo_info "logs are in $dlog/basic_simulator_ue.txt"
    set +e
    {
      cd $OPENAIR_DIR/cmake_targets/basic_simulator/ue
      cmake .
      make -j`nproc` lte-uesoftmodem
      make -j`nproc` coding params_libconfig tcp_bridge_oai
      ln -sf libtcp_bridge_oai.so liboai_device.so
      cd ../..
    } > $dlog/basic_simulator_ue.txt 2>&1
    set -e
    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/lte-uesoftmodem -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libcoding.so -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libparams_libconfig.so -a \
         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libtcp_bridge_oai.so ] ; then
      echo_success "UE compiled"
      check_warnings "$dlog/basic_simulator_ue.txt"
    else
      echo_error "UE compilation failed"
      exit 1
    fi

    echo_info "Generate UE SIM data"
    $OPENAIR_DIR/targets/bin/conf2uedata -c $OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf -o $OPENAIR_DIR/cmake_targets/basic_simulator/ue

  fi
}

main "$@"