An error occurred fetching the project authors.
- 11 Feb, 2018 1 commit
-
-
jftt_wangshanshan authored
-
- 05 Feb, 2018 2 commits
-
-
Xu Bo authored
-
jftt_wangshanshan authored
-
- 27 Jan, 2018 1 commit
-
-
Xu Bo authored
-
- 26 Jan, 2018 1 commit
-
-
Xu Bo authored
reset release_timer from 200ms to 100ms because of flightmode on/off issue, reduce ul failure timer log
-
- 22 Jan, 2018 2 commits
-
-
Cedric Roux authored
As reported by Emad Alizade: According to "Issue255 256 257 paging reesta release" that has been merged in develop version, we have a question: In rrc_eNB_free_UE() function only all ulsch related memory of user has been cleaned, but I think not only ulsch memory but also dlsch memory must be cleaned. I tested the latest develop version and with repetition UE attach-detach procedures we find that the dlsch memory has not been cleaned and after repeat this sequence (45 times) assertion with cause UE_id!=-1 (no free or exiting dlsch_context, dci_tools.c: fill_dci_and_dlsch() ) occurred and no UE will be attached to system. The fixes in this commit are from Emad Alizade.
-
Xu Bo authored
-
- 16 Jan, 2018 1 commit
-
-
Xu Bo authored
-
- 15 Jan, 2018 2 commits
-
-
Cedric Roux authored
This commit fixes issues introduced by the previous commit. Summary of work: - cleanup: - fix LOG_XX to be less verbose - fix cmake_targets/CMakeLists.txt - fix oaienv - remove dead code - bug fixes: - in openair1/SCHED/fapi_l1.c we had: eNB->pdcch_vars[subframe&1].num_dci = number_dci; should be: eNB->pdcch_vars[subframe&1].num_dci = 0; This bug let the PHY send more DCIs than what should have been sent because num_dci is incremented later on in the code. This fix may be a problem for fapi mode, to be checked. - add new T VCD traces - revert openair1/PHY/TOOLS/file_output.c to 'develop' version - remove thread_id in logRecord/logRecord_mt - revert (and adapt) configuration files - be careful when doing frame++, we need to % 1024 - revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c - NFAPI: - the open-nFAPI code has been included in the repository. See nfapi/README. Maybe we should "git clone" the Cisco repository instead. We have to be careful of availability though. What has been tested: - monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink Anything else may fail to work, especially the FAPI mode, which has not been tested at all.
-
Cedric Roux authored
It has been chosen to not include the full history of commits from David. He included a binary version of wireshark, probably a modified one that understands NFAPI. Wireshark is released under the GPL license, we cannot include it in the repository. We could have done a next commit to remove this binary. But then it would still be present in the history of commits, which may not be allowed. And it would take space on disk. We could edit the history to remove wireshark entirely. But this operation is too complicated. There was also a pcap capture file, which has nothing to do in the history of commits and would take space on disk. There again, it's too difficult to edit the history to remove it. There was a file .gitignore that was also removed. The original history can be found on David's repository: https://gitlab.eurecom.fr/daveprice/openairinterface5g/ The branch is: nfapi-ru-rau-split. A copy of that branch has been included in the internal OAI repository, for those who have access to it. The branch is the same. The last commit ID is 9106438239e0bc626ff1fa1d97d911caadd0fbb9. You can compare the current commit with the commit 9106... to see what differs. The current commit has to be considered non-working. The commit following the current commit will fix problems with the work in the current commit. If you use git bisect, don't spend time analyzing the current commit.
-
- 13 Jan, 2018 4 commits
- 11 Jan, 2018 1 commit
-
-
Xu Bo authored
-
- 08 Jan, 2018 3 commits
- 27 Dec, 2017 1 commit
-
-
Xu Bo authored
-
- 28 Nov, 2017 1 commit
-
-
Xu Bo authored
merge the implemention of Paging, RRCConnectionRelease, RRCConnectionReestablishment, E-RAB Modify, E-RAB Release
-
- 27 Nov, 2017 1 commit
-
-
Cedric Roux authored
physicalConfigDedicated may be legitimately NULL at some places with the current code. A cleaner solution is needed (we should always have a dedicated config, initialized with values from the 3GPP specs, not have a NULL as we do now).
-
- 04 Nov, 2017 1 commit
-
-
Raymond Knopp authored
changing of notation for Random-Access procedure to match documentation. Function remains the same. Indentation (-kr) run on all files in LAYER2/MAC
-
- 23 Oct, 2017 1 commit
-
-
Cedric Roux authored
-
- 14 Oct, 2017 1 commit
-
-
Raymond Knopp authored
Adjustment for received power calculation in eNB pusch procedures. Added factor to account for mcs (mimic the power control adjustment in UE). activated periodic trace for PHR/PUSCH SNR/PUCCH SNR in MAC.
-
- 12 Oct, 2017 3 commits
-
-
Raymond Knopp authored
-
Cedric Roux authored
-
Cedric Roux authored
- better ulsch harq management in phy (maybe not over) - don't do schedule_CSI if UE not in RRC_CONNECTED (not sure if correct) - don't call find_ulsch in fill_dci0 - some spaces cleaned - log improved
-
- 08 Oct, 2017 2 commits
-
-
Raymond Knopp authored
handling of PDCCH order. stoping UE-specific scheduler during RA procedure. checking for DCI format (resource allocation) to not overwrite resource_block_coding for format 1A DCIs.
-
Raymond Knopp authored
-
- 06 Oct, 2017 1 commit
-
-
Cedric Roux authored
-
- 05 Oct, 2017 1 commit
-
-
Cedric Roux authored
-
- 04 Oct, 2017 1 commit
-
-
Cedric Roux authored
- don't use o_flip anymore in ulsch_decoding - remove dl_cqi from eNB_UE_STATS - put dl_cqi[NFAPI_CC_MAX] in UE_sched_ctrl - adapt code for this dl_cqi change (from eNB_UE_STATS to UE_sched_ctrl) - extract_pusch_csi has been fixed for CQI_ReportModeAperiodic_rm30, the others need to be done. Program will exit if one uses them. Not sure if setting sched_ctl->dl_cqi[CC_idP] has to be done in this function...
-
- 01 Oct, 2017 1 commit
-
-
Raymond Knopp authored
fixed various bugs in NFAPI interface and DCI CCE allocations (eNB_scheduler_primitives.c:allocate_CCEs())
-
- 25 Sep, 2017 2 commits
-
-
Raymond Knopp authored
-
Francois TABURET authored
-
- 21 Sep, 2017 2 commits
-
-
Raymond Knopp authored
-
Raymond Knopp authored
-
- 19 Sep, 2017 1 commit
-
-
Raymond Knopp authored
-
- 14 Sep, 2017 1 commit
-
-
Raymond Knopp authored
-
- 24 Aug, 2017 1 commit
-
-
Cedric Roux authored
This commits contains several fixes to improve a multi-UE scenario. This is not the end of the story. Summary of work: ================ 1 - improve SR (scheduling requests): We configured n1pucch == 3 for scheduling requests, for all UEs. We now use 71 - UE_id/10. For it to work, it is vital that pucch_nRB_CQI in the configuration file is set to 0, otherwise the SR will go to an RB used for PUSCH and uplink decoding will fail whenever an UE does SR. Note that we will have problems with 20MHz when we use a CCE that let the UE send the ACK/NACK using a n1pucch allocated for SR, because when the PDCCH is of size 3, we can have 87 CCEs and it may lead to an n1pucch colliding with one for SR. The work done in this patch is a quick solution, seems to work with 10MHz. The real solution is to disable the use of those CCEs that would lead an UE to use a n1pucch colliding with an SR n1pucch. Then we can use whatever n1pucch we want for SR, as long as the scheduler protects them. Impacted files: configuration files openair2/RRC/LITE/MESSAGES/asn1_msg.c 2 - some fixes for uplink scheduling: - Do not use PRACH for PUSCH, that leads to too many false PRACH detection. Plus the PUSCH receiving may fail if one UE uses the PRACH at the same time. - Take care of retransmissions. That was not done at all, so we could allocate one RB to several UEs. The current design of the code makes it hard to do it properly, so we chose a quick and dirty solution, which is to increase "first_rb" to skip any RB used for retransmission. In this process we may skip a lot of free RBs. A proper solution is needed here. - Do not allocate the last RB. This one is used for PUCCH. It was sometimes allocated to PUSCH. - In the pre-processor we didn't pre-allocate RBs to UEs with an empty buffer status. We didn't check if the UE sent an SR. For example in a three UEs scenario, we could have the third UE never scheduled in the uplink. - rb_table_index was not decreased properly, so we allocated too much RBs to some UEs and thus not enough to others. Impacted files: openair2/LAYER2/MAC/eNB_scheduler_ulsch.c openair2/LAYER2/MAC/pre_processor.c openair1/SCHED/phy_procedures_lte_eNb.c 3 - some fixes for downlink scheduling: - The check on CCE allocation was not correct. We did something like: if (cce allocation is possible) { prepare } We should have done: save current cce allocation if (cce allocation is possible) { allocate cce prepare } reset current cce allocation Basically, when we scheduled several UEs, they were checked separately, and the totality of them was not checked. Impacted file: openair2/LAYER2/MAC/eNB_scheduler_dlsch.c - The retransmissions are probably not handled correctly. Check in openair2/LAYER2/MAC/pre_processor.c, near the comment "// control channel or retransmission", the case "round > 0" was added. It's probably not enough, even maybe not correct. - Change SF05_LIMIT with SF0_LIMIT. We accept to use central blocks in SF 5. The code was also not correct, vrb_map was not set properly because the loop on j was wrong for the last RBG (which can have one less RB than the others). This is not satisfying. The real solution is to use the central RBs and check that the MCS used is compatible with the numbers of resource elements allocated (we don't want to put too more data bits than what fits). 4 - some fixes in PUCCH decoding: See: openair1/PHY/LTE_TRANSPORT/pucch.c Probably not enough. Some more work and analysis is required for a proper use of the PUCCH. What we see is that the PUCCH constellation gets wrong when there are several UEs, meaning the received ACK/NACK is not properly decoded (this, or something else...). 5 - several fixes/checks added here and there: - The final allocate_CCEs in eNB_dlsch_ulsch_scheduler is checked and we brutally exit if it fails. - We exit in get_num_pdcch_symbols in case of failure (this should never happen anyway, no big deal normally). - Some logs added or changed to error/warning instead of debug. - In dlsch_scheduler_pre_processor an abort() was added. The code here looks suspicious. - In assign_max_mcs_min_rb, rb_table_index was not set to 2, the value 0 was used. This was not correct. What remains to be done: ======================== - Correct CCE allocation (take into account SR n1pucch, check that all the n1pucch that will be used are "compatible"). - Take into account the PHICH when scheduling uplink. As of today it is very possible to have two UEs use the same PHICH group and PHICH sequence index. We can use n_DMRS in the DCI to have uniqueness (see 36.213 table 9.1.2-2). We can drop an allocation if there is no free PHICH group/sequence index for a given UE. - When there is an uplink retransmission in the PRACH, we have to disable PRACH detection. It is possible that one UE does PRACH at the same time, but then what to do? We could use DCI0-based retransmission in this specific case maybe... - Handle free RBs in uplink in a much better way in case of a retransmission. We may have a lot of free unused RBs with the current code. - Check downlink retransmissions. Not much has been done there. - Surely more stuff not clear yet. In some situations we don't have a good behavior of the system. Hard to describe more precisely at this point.
-