[OAI-UE] several fixes in OAI-UE

1- implement max harq retrans
           2- bug in harqId > 1 for dci format 1A
           3- wrong G computation
           4- bug in harq UL for scheduling flag
           5- initial sync, limit freq offset to 150Hz

See merge request !11

           1- implement max harq retrans
           2- bug in harqId > 1 for dci format 1A
           3- wrong G computation
           4- bug in harq UL for scheduling flag
           5- initial sync, limit freq offset to 150Hz

merge oai/develop to oai1B/debelop1B



See merge request !10

The PHICH generation is wrong.
HARQ process X is uplink scheduled at TTI n.
At TTI n+4 the eNB receives the data.
At TTI n+8 the eNB sends ACK/NACK on the PHICH.

The problem is that PHICH generation is done after scheduling.
And PHICH generation uses "first_rb" and "n_DMRS" to compute
"ngroup_PHICH" and "nseq_PHICH".

So at TTI n+8 if the eNB has reused the HARQ process X for
a new uplink scheduling the values "first_rb" and "n_DMRS"
may have changed.

We need to use the previous values.

One solution would have been to do PHICH generation before
scheduling. The problem is that "generate_phich_top" does more
than PHICH generation. It has to setup parameters to sort of
"emulate" a DCI0 in case of retransmission scheduled without
DCI0. So part of it has to be done after scheduling. We would
have to split the function.

The simple adopted fix is to store old values of "first_rb"
and "n_DMRS" and use those values in "generate_phich_top".

This fix has only been tested with FDD. TDD may miserably fail.

during 'harmony' developments initialisation of some --phy-test parameters were removed



See merge request !8

Update 3gpplte_turbo_decoder_sse_8bit.c

maximum frame length is 6144

See merge request !9

The case of a CRC == 0 is legal.

After discussion with Raymond, it is also possible to have all
bits at 0 (and so a CRC==0) if there is no transmission and thus
not much energy.

So this hotfix may introduce new problems (false decoding).

A future work is to handle this case properly by not calling the
turbo decoder if there is not enough energy received.

The problem might manifest itself more in the UE part, especially
when it tries to decode MIB and/or SIB (if I understood correctly).

[OAI-UE] fix for issue#19: DCI0 detction with wrong RIV



See merge request !7

[OAI-UE] fix for issue#18: Cell sync issue



See merge request !6

[OAI-UE] fix for issue#14: segmentation fault in turbo decoder



See merge request !5

Enhancement 64 phy test



See merge request !46

[OAI-UE] RRCConnectionReconf fixes

1- SRB2 fix
2- attach accept, support type of list 0 with number of element = 1

See merge request !4

           1- SRB2 fix
           2- attach accept, support type of list 0 with number of element = 1

[OAI-UE] add featureGroup to UeCapability (only for usim test mode)

add featureGroup to UeCapability (only for usim test mode)

See merge request !2

Feature 11 ue periodic cqi ri

pucch format2 periodic cqi/ri

See merge request !1

           Handle SRS TX in case of CQI / SR / AN simultaneous transmission

maximum frame length is 6144

parent a6742020 - Commit 1fa2f76e

Conflicts:
	targets/RT/USER/lte-softmodem.c