gnb.sa.band78.fr1.162PRB.2x2.usrpn300.conf 9.76 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";

gNBs =
(
 {
    ////////// Identification parameters:
    gNB_ID    =  0xe00;
    gNB_name  =  "gNB-OAI";

    // Tracking area code, 0x0000 and 0xfffe are reserved values
    tracking_area_code  =  1;
    plmn_list = ({
                  mcc = 208;
                  mnc = 99;
                  mnc_length = 2;
                  snssaiList = (
                    {
                      sst = 1;
                      sd  = 0x1; // 0 false, else true
                    }
                  );
                  });

    nr_cellid = 12345678L;

    ////////// Physical parameters:

30
    pdsch_AntennaPorts_XP = 2;
31
    pusch_AntennaPorts    = 2;
32
    do_CSIRS              = 1;
33

34 35
    pdcch_ConfigSIB1 = (
      {
36
        controlResourceSetZero = 12;
37
        searchSpaceZero = 0;
38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
      }
    );

    servingCellConfigCommon = (
    {
 #spCellConfigCommon

      physCellId                                                    = 0;

#  downlinkConfigCommon
    #frequencyInfoDL
      # this is 3300.60 MHz + 81*12*30e-3 MHz = 3329.76
      absoluteFrequencySSB                                          = 621984;
      # this is 3300.60 MHz
      dl_absoluteFrequencyPointA                                       = 620040;
      #scs-SpecificCarrierList
        dl_offstToCarrier                                              = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
        dl_subcarrierSpacing                                           = 1;
        dl_carrierBandwidth                                            = 162;
     #initialDownlinkBWP
      #genericParameters
       # this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
62
       initialDLBWPlocationAndBandwidth                                        = 31624;
63 64 65 66 67
       #
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
        initialDLBWPsubcarrierSpacing                                           = 1;
      #pdcch-ConfigCommon
68
        initialDLBWPcontrolResourceSetZero                                      = 12;
69
        initialDLBWPsearchSpaceZero                                             = 0;
70 71 72 73 74 75 76 77 78 79 80 81 82

  #uplinkConfigCommon
     #frequencyInfoUL
      ul_frequencyBand                                                 = 78;
      #scs-SpecificCarrierList
      ul_offstToCarrier                                              = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      ul_subcarrierSpacing                                           = 1;
      ul_carrierBandwidth                                            = 162;
      pMax                                                          = 20;
     #initialUplinkBWP
      #genericParameters
83
        initialULBWPlocationAndBandwidth                                        = 31624;
84 85 86 87 88 89 90 91 92 93 94
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
        initialULBWPsubcarrierSpacing                                           = 1;
      #rach-ConfigCommon
        #rach-ConfigGeneric
          prach_ConfigurationIndex                                  = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
          prach_msg1_FDM                                            = 0;
          prach_msg1_FrequencyStart                                 = 0;
          zeroCorrelationZoneConfig                                 = 12;
luis_pereira87's avatar
luis_pereira87 committed
95
          preambleReceivedTargetPower                               = -96;
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
          preambleTransMax                                          = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
        powerRampingStep                                            = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
        ra_ResponseWindow                                           = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
        ra_ContentionResolutionTimer                                = 7;
        rsrp_ThresholdSSB                                           = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
        prach_RootSequenceIndex_PR                                  = 2;
        prach_RootSequenceIndex                                     = 1;
        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
        #
        msg1_SubcarrierSpacing                                      = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
        restrictedSetConfig                                         = 0,

        msg3_DeltaPreamble                                          = 1;
        p0_NominalWithGrant                                         =-90;

# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
        pucchGroupHopping                                           = 0;
        hoppingId                                                   = 40;
        p0_nominal                                                  = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
      ssb_PositionsInBurst_PR                                       = 2;
      ssb_PositionsInBurst_Bitmap                                   = 1;

# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
      ssb_periodicityServingCell                                    = 2;

# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
      dmrs_TypeA_Position                                           = 0;

# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      subcarrierSpacing                                             = 1;


  #tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      referenceSubcarrierSpacing                                    = 1;
      # pattern1
      # dl_UL_TransmissionPeriodicity
      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
      dl_UL_TransmissionPeriodicity                                 = 6;
      nrofDownlinkSlots                                             = 7;
      nrofDownlinkSymbols                                           = 6;
      nrofUplinkSlots                                               = 2;
      nrofUplinkSymbols                                             = 4;

  ssPBCH_BlockPower                                             = -25;
  }

  );


    # ------- SCTP definitions
    SCTP :
    {
        # Number of streams to use in input/output
        SCTP_INSTREAMS  = 2;
        SCTP_OUTSTREAMS = 2;
    };


    ////////// AMF parameters:
    amf_ip_address      = ( { ipv4       = "192.168.70.132";
                              ipv6       = "192:168:30::17";
                              active     = "yes";
                              preference = "ipv4";
                            }
                          );


    NETWORK_INTERFACES :
    {
        GNB_INTERFACE_NAME_FOR_NG_AMF            = "demo-oai";
        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129/24";
        GNB_INTERFACE_NAME_FOR_NGU               = "demo-oai";
        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129/24";
        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
    };

  }
);

MACRLCs = (
{
  num_cc                      = 1;
  tr_s_preference             = "local_L1";
  tr_n_preference             = "local_RRC";
205
  pusch_TargetSNRx10          = 300;
206
  pucch_TargetSNRx10          = 200;
207
  pusch_FailureThres          = 1000;
208
  ulsch_max_frame_inactivity  = 0;
209
  ul_max_mcs                  = 28;
210 211 212 213 214 215 216 217
}
);

L1s = (
{
  num_cc = 1;
  tr_n_preference = "local_mac";
  prach_dtx_threshold = 120;
218
  pucch0_dtx_threshold = 80;
219 220 221 222 223 224
}
);

RUs = (
{
  local_rf       = "yes"
225 226 227
  nb_tx          = 2;
  nb_rx          = 2;
  att_tx         = 0;
228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286
  att_rx         = 0;
  bands          = [78];
  max_pdschReferenceSignalPower = -27;
  max_rxgain                    = 75;
  eNB_instances  = [0];
  ##beamforming 1x2 matrix: 1 layer x 2 antennas
  bf_weights = [0x00007fff, 0x0000];
  #clock_src = "internal";
  sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);

THREAD_STRUCT = (
{
  #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
  parallel_config    = "PARALLEL_SINGLE_THREAD";
  #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
  worker_config      = "WORKER_ENABLE";
}
);

rfsimulator :
{
  serveraddr = "server";
  serverport = "4043";
  options = (); #("saviq"); or/and "chanmod"
  modelname = "AWGN";
  IQfile = "/tmp/rfsimulator.iqs";
};

security = {
  # preferred ciphering algorithms
  # the first one of the list that an UE supports in chosen
  # valid values: nea0, nea1, nea2, nea3
  ciphering_algorithms = ( "nea0" );

  # preferred integrity algorithms
  # the first one of the list that an UE supports in chosen
  # valid values: nia0, nia1, nia2, nia3
  integrity_algorithms = ( "nia2", "nia0" );

  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
  drb_ciphering = "yes";
  drb_integrity = "no";
};

log_config :
{
  global_log_level                      ="info";
  hw_log_level                          ="info";
  phy_log_level                         ="info";
  mac_log_level                         ="info";
  rlc_log_level                         ="info";
  pdcp_log_level                        ="info";
  rrc_log_level                         ="info";
  ngap_log_level                        ="debug";
  f1ap_log_level                        ="debug";
};