container_sa_sc_b200_quectel.xml 6.12 KB
<!--

 Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 contributor license agreements.  See the NOTICE file distributed with
 this work for additional information regarding copyright ownership.
 The OpenAirInterface Software Alliance licenses this file to You under
 the OAI Public License, Version 1.1  (the "License"); you may not use this file
 except in compliance with the License.
 You may obtain a copy of the License at

      http://www.openairinterface.org/?page_id=698

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.

 For more information about the OpenAirInterface (OAI) Software Alliance:
      contact@openairinterface.org

-->
<testCaseList>
  <htmlTabRef>TEST-SA-FR1-SC-FDMA-B200</htmlTabRef>
  <htmlTabName>40 MHz TDD SA with SC-FDMA</htmlTabName>
  <htmlTabIcon>tasks</htmlTabIcon>
  <repeatCount>1</repeatCount>
  <TestCaseRequestedList>
    300000
    311111
    210000
    800813
    230101
    210001
    250000
    250001
    270000
    270001
    270002
    270003
    270004
    260001
    200002
    260002
    250000
    210010
    210002
    230201
    400000
  </TestCaseRequestedList>
  <TestCaseExclusionList></TestCaseExclusionList>

  <testCase id="311111">
    <class>Pull_Local_Registry</class>
    <desc>Pull Images from Local Registry</desc>
    <test_svr_id>0</test_svr_id>
    <images_to_pull>oai-gnb</images_to_pull>
  </testCase>

  <testCase id="300000">
    <class>Custom_Command</class>
    <desc>Disable Sleep States</desc>
    <node>ofqot</node>
    <command>sudo cpupower idle-set -D 0</command>
  </testCase>
  <testCase id="400000">
    <class>Custom_Command</class>
    <desc>Enable Sleep States</desc>
    <node>ofqot</node>
    <command>sudo cpupower idle-set -E</command>
  </testCase>

  <testCase id="210000">
    <class>Initialize_UE</class>
    <desc>Initialize Quectel</desc>
    <id>idefix</id>
  </testCase>
  <testCase id="210002">
    <class>Terminate_UE</class>
    <desc>Terminate Quectel</desc>
    <id>idefix</id>
  </testCase>
  <testCase id="210001">
    <class>Attach_UE</class>
    <desc>Attach UE</desc>
    <id>idefix</id>
  </testCase>
  <testCase id="210010">
    <class>Detach_UE</class>
    <desc>Detach UE</desc>
    <id>idefix</id>
  </testCase>
  <testCase id="800813">
      <class>Create_Workspace</class>
      <desc>Creating new Workspace</desc>
      <eNB_instance>0</eNB_instance>
      <eNB_serverId>0</eNB_serverId>
  </testCase>
  <testCase id="230101">
    <class>Deploy_Object</class>
    <desc>Deploy gNB (TDD/Band78/40MHz/B200) with SC-FDMA in a container</desc>
    <yaml_path>ci-scripts/yaml_files/sa_sc_b200_gnb</yaml_path>
    <eNB_instance>0</eNB_instance>
    <eNB_serverId>0</eNB_serverId>
  </testCase>

  <testCase id="200001">
    <class>IdleSleep</class>
    <desc>Sleep</desc>
    <idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
  </testCase>

  <testCase id="200002">
    <class>IdleSleep</class>
    <desc>Sleep</desc>
    <idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
  </testCase>


  <testCase id="250000">
    <class>Ping</class>
    <desc>Ping: 20pings in 20sec</desc>
    <id>idefix</id>
    <ping_args>-c 20 %cn_ip%</ping_args>
    <ping_packetloss_threshold>1</ping_packetloss_threshold>
    <ping_rttavg_threshold>15</ping_rttavg_threshold>
  </testCase>

  <testCase id="250001">
    <class>Ping</class>
    <desc>Ping: 100pings in 20sec</desc>
    <id>idefix</id>
    <ping_args>-c 100 -i 0.2 %cn_ip%</ping_args>
    <ping_packetloss_threshold>1</ping_packetloss_threshold>
    <ping_rttavg_threshold>15</ping_rttavg_threshold>
  </testCase>

  <testCase id="270000">
    <class>Iperf</class>
    <desc>iperf (DL/80Mbps/UDP)(30 sec)(single-ue profile)</desc>
    <iperf_args>-u -b 80M -t 30 -R</iperf_args>
    <id>idefix</id>
    <svr_id>sabox-nepes</svr_id>
    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
    <iperf_bitrate_threshold>95</iperf_bitrate_threshold>
  </testCase>

  <testCase id="270001">
    <class>Iperf</class>
    <desc>iperf (UL/6Mbps/UDP)(30 sec)(single-ue profile)</desc>
    <iperf_args>-u -b 6M -t 30</iperf_args>
    <id>idefix</id>
    <svr_id>sabox-nepes</svr_id>
    <iperf_packetloss_threshold>1</iperf_packetloss_threshold>
    <iperf_bitrate_threshold>95</iperf_bitrate_threshold>
  </testCase>

  <testCase id="270002">
    <class>Iperf</class>
    <desc>iperf (BIDIR TCP)(10 sec)(single-ue profile)</desc>
    <iperf_args>-t 10 --bidir</iperf_args>
    <id>idefix</id>
    <svr_id>sabox-nepes</svr_id>
  </testCase>

  <testCase id="270003">
    <class>Iperf</class>
    <desc>iperf (DL/TCP)(30 sec)(single-ue profile)</desc>
    <iperf_args>-t 30 -R</iperf_args>
    <id>idefix</id>
    <svr_id>sabox-nepes</svr_id>
    <iperf_tcp_rate_target>35</iperf_tcp_rate_target>
  </testCase>

  <testCase id="270004">
    <class>Iperf</class>
    <desc>iperf (UL/TCP)(30 sec)(single-ue profile)</desc>
    <iperf_args>-t 30</iperf_args>
    <id>idefix</id>
    <svr_id>sabox-nepes</svr_id>
    <iperf_tcp_rate_target>5</iperf_tcp_rate_target>
  </testCase>

  <testCase id="260001">
    <class>Custom_Command</class>
    <desc>Trigger Reestablishment</desc>
    <node>ofqot</node>
    <command>echo ci force_reestab | nc -N 127.0.0.1 9090 | grep -E 'Reset RLC counters of UE RNTI [0-9a-f]{4} to trigger reestablishment'</command>
    <command_fail>yes</command_fail>
  </testCase>
  <testCase id="260002">
    <class>Custom_Command</class>
    <desc>Verify Reestablishment</desc>
    <node>ofqot</node>
    <command>echo ci get_reestab_count | nc -N 127.0.0.1 9090 | grep -E 'UE RNTI [0-9a-f]{4} reestab 1'</command>
    <command_fail>yes</command_fail>
  </testCase>

  <testCase id="230201">
    <class>Undeploy_Object</class>
    <desc>Undeploy gNB</desc>
    <yaml_path>ci-scripts/yaml_files/sa_sc_b200_gnb</yaml_path>
    <eNB_instance>0</eNB_instance>
    <eNB_serverId>0</eNB_serverId>
    <d_retx_th>10,100,100,100</d_retx_th>
    <u_retx_th>10,100,100,100</u_retx_th>
  </testCase>

</testCaseList>