Skip to content

O
OpenXG-RAN
Commit eed7ac0c authored by hardy's avatar hardy
Browse files
Options

Merge remote-tracking branch 'origin/add-ru-docker-image' into integration_2021_wk22

parents 1b4faa8d c7bad3db
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 533 additions and 184 deletions
ci-scripts/cls_containerize.py
View file @ eed7ac0c
......@@ -150,6 +150,8 @@ class Containerize():
imageNames.append(('oai-nr-ue', 'nrUE'))
if self.host == 'Red Hat':
imageNames.append(('oai-physim', 'phySim'))
if self.host == 'Ubuntu':
imageNames.append(('oai-lte-ru', 'lteRU'))
if len(imageNames) == 0:
imageNames.append(('oai-enb', 'eNB'))
......
ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf
View file @ eed7ac0c
......@@ -19,54 +19,54 @@ eNBs =
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
////////// Physical parameters:
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 40;
downlink_frequency = 2350000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower =-27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 40;
downlink_frequency = 2350000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower =-27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
......@@ -76,7 +76,7 @@ eNBs =
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
......@@ -92,17 +92,17 @@ eNBs =
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
......@@ -148,7 +148,7 @@ eNBs =
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
......@@ -186,41 +186,41 @@ eNBs =
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
puSch10xSnr = 200;
puCch10xSnr = 200;
}
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "lo";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
{
local_if_name = "lo";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
......
docker/Dockerfile.lteRU.rhel8.2 0 → 100644
View file @ eed7ac0c
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM ran-build:latest AS ru-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --RU --ninja -w USRP --verbose-ci
RUN yum install -y python3-pip && \
pip3 install --ignore-installed pyyaml && \
python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ru
ENV TZ=Europe/Paris
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
tzdata \
atlas \
net-tools \
iputils \
iproute && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-lte-ru/bin
COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
WORKDIR /usr/local/lib/
COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
# Copying from the ran-build image the USRP needed packages
COPY --from=ru-build /lib64/libconfig.so.9 /lib64
COPY --from=ru-build /lib64/libblas.so.3 /lib64
COPY --from=ru-build /lib64/liblapack.so.3 /lib64
COPY --from=ru-build /lib64/liblapacke.so.3 /lib64
COPY --from=ru-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=ru-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
/bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
/bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
ldconfig
# Copy the relevant configuration files for RRU
WORKDIR /opt/oai-lte-ru/etc
COPY --from=ru-build /oai-ran/docker/etc/rru* ./
WORKDIR /opt/oai-lte-ru
ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]
docker/Dockerfile.lteRU.ubuntu18 0 → 100644
View file @ eed7ac0c
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu 18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS ru-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --RU --ninja -w USRP --verbose-ci
RUN apt-get install -y python3-pip && \
pip3 install --ignore-installed pyyaml && \
python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
#start from scratch for target executable
FROM ubuntu:bionic as oai-lte-ru
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe/Paris
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
tzdata \
software-properties-common \
libblas3 \
libatlas3-base \
libconfig9 \
net-tools \
iputils-ping \
iproute2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-lte-ru/bin
COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
WORKDIR /usr/local/lib/
COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
/bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
/bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
ldconfig
# Copy the relevant configuration files for RRU
WORKDIR /opt/oai-lte-ru/etc
COPY --from=ru-build /oai-ran/docker/etc/rru* ./
WORKDIR /opt/oai-lte-ru
ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]
docker/scripts/enb_entrypoint.sh
View file @ eed7ac0c
......@@ -11,6 +11,8 @@ if [[ -v USE_FDD_DU ]]; then ln -s $PREFIX/etc/du.fdd.conf $PREFIX/etc/enb.conf;
if [[ -v USE_FDD_MONO ]]; then ln -s $PREFIX/etc/enb.fdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_TDD_MONO ]]; then ln -s $PREFIX/etc/enb.tdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_FDD_FAPI_RCC ]]; then ln -s $PREFIX/etc/rcc.nfapi.fdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_FDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.fdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_TDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.tdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/enb.conf; fi
if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/enb.conf; fi
......
docker/scripts/enb_parameters.yaml
View file @ eed7ac0c
......@@ -25,7 +25,7 @@
dest_dir: docker/etc
- configurations:
- filePrefix: cu
- filePrefix: cu.band7.tm1.25PRB
outputfilename: "cu.fdd.conf"
config:
- key: Active_eNBs
......@@ -68,7 +68,7 @@
- key: ENB_IPV4_ADDRESS_FOR_X2C
env: "@F1_CU_IP_ADDRESS@"
- filePrefix: du
- filePrefix: du.band7.tm1.25PRB
outputfilename: "du.fdd.conf"
config:
- key: Active_eNBs
......@@ -248,3 +248,89 @@
- key: ENB_IPV4_ADDRESS_FOR_X2C
env: "@F1_CU_IP_ADDRESS@"
- filePrefix: "rcc.band7.tm1.if4p5.lo.25PRB"
outputfilename: "rcc.if4p5.fdd.conf"
config:
- key: Active_eNBs
env: "@ENB_NAME@"
- key: eNB_name
env: "@ENB_NAME@"
- key: plmn_list
env:
mcc: "@MCC@"
mnc: "@MNC@"
mnc_length: "@MNC_LENGTH@"
- key: tracking_area_code
env: "@TAC@"
- key: eutra_band
env: "@UTRA_BAND_ID@"
- key: downlink_frequency
env: "@DL_FREQUENCY_IN_MHZ@000000"
- key: uplink_frequency_offset
env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
- key: Nid_cell
env: "@NID_CELL@"
- key: N_RB_DL
env: "@NB_PRB@"
- key: ipv4
env: "@MME_S1C_IP_ADDRESS@"
- key: ENB_INTERFACE_NAME_FOR_S1_MME
env: "@RCC_IF_NAME@"
- key: ENB_IPV4_ADDRESS_FOR_S1_MME
env: "@RCC_S1C_IP_ADDRESS@"
- key: ENB_INTERFACE_NAME_FOR_S1U
env: "@RCC_IF_NAME@"
- key: ENB_IPV4_ADDRESS_FOR_S1U
env: "@RCC_IP_ADDRESS@"
- key: ENB_IPV4_ADDRESS_FOR_X2C
env: "@RCC_IP_ADDRESS@"
- key: local_if_name
env: "@IF4P5_IF_NAME@"
- key: remote_address
env: "@IF4P5_RRU_IP_ADDRESS@"
- key: local_address
env: "@IF4P5_RCC_IP_ADDRESS@"
- filePrefix: "rcc.band40.tm1.25PRB"
outputfilename: "rcc.if4p5.tdd.conf"
config:
- key: Active_eNBs
env: "@ENB_NAME@"
- key: eNB_name
env: "@ENB_NAME@"
- key: plmn_list
env:
mcc: "@MCC@"
mnc: "@MNC@"
mnc_length: "@MNC_LENGTH@"
- key: tracking_area_code
env: "@TAC@"
- key: eutra_band
env: "@UTRA_BAND_ID@"
- key: downlink_frequency
env: "@DL_FREQUENCY_IN_MHZ@000000"
- key: uplink_frequency_offset
env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
- key: Nid_cell
env: "@NID_CELL@"
- key: N_RB_DL
env: "@NB_PRB@"
- key: ipv4
env: "@MME_S1C_IP_ADDRESS@"
- key: ENB_INTERFACE_NAME_FOR_S1_MME
env: "@RCC_IF_NAME@"
- key: ENB_IPV4_ADDRESS_FOR_S1_MME
env: "@RCC_S1C_IP_ADDRESS@"
- key: ENB_INTERFACE_NAME_FOR_S1U
env: "@RCC_IF_NAME@"
- key: ENB_IPV4_ADDRESS_FOR_S1U
env: "@RCC_IP_ADDRESS@"
- key: ENB_IPV4_ADDRESS_FOR_X2C
env: "@RCC_IP_ADDRESS@"
- key: local_if_name
env: "@IF4P5_IF_NAME@"
- key: remote_address
env: "@IF4P5_RRU_IP_ADDRESS@"
- key: local_address
env: "@IF4P5_RCC_IP_ADDRESS@"
docker/scripts/generateTemplate.py
View file @ eed7ac0c
......@@ -39,20 +39,24 @@ def main():
for config in data[1]["configurations"]:
filePrefix = config["filePrefix"]
outputfilename = config["outputfilename"]
print('================================================')
print('filePrefix = ' + filePrefix)
print('outputfilename = ' + outputfilename)
for inputfile in dir:
if inputfile.find(filePrefix) >=0:
prefix_outputfile = {"cu": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"du": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
prefix_outputfile = {"cu.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"du.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"rru.fdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"rru.tdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"enb.band7.tm1.25PRB.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"enb.band40.tm1.25PRB.FairScheduler.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"rcc.band7.tm1.if4p5.lo.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"rcc.band40.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"ue.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
"ue_sim_ci": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
}
print('inputfile = ' + inputfile)
if filePrefix in prefix_outputfile:
outputfile1 = prefix_outputfile[filePrefix]
......
docker/scripts/lte_ru_entrypoint.sh 0 → 100755
View file @ eed7ac0c
#!/bin/bash
set -euo pipefail
PREFIX=/opt/oai-lte-ru
# Based another env var, pick one template to use
if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/rru.conf; fi
if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/rru.conf; fi
# Only this template will be manipulated
CONFIG_FILES=`ls $PREFIX/etc/rru.conf || true`
for c in ${CONFIG_FILES}; do
# grep variable names (format: ${VAR}) from template to be rendered
VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
# create sed expressions for substituting each occurrence of ${VAR}
# with the value of the environment variable "VAR"
EXPRESSIONS=""
for v in ${VARS}; do
NEW_VAR=`echo $v | sed -e "s#@##g"`
if [[ "${!NEW_VAR}x" == "x" ]]; then
echo "Error: Environment variable '${NEW_VAR}' is not set." \
"Config file '$(basename $c)' requires all of $VARS."
exit 1
fi
EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
done
EXPRESSIONS="${EXPRESSIONS#';'}"
# render template and inline replace config file
sed -i "${EXPRESSIONS}" ${c}
done
# Load the USRP binaries
if [[ -v USE_B2XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
elif [[ -v USE_X3XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
elif [[ -v USE_N3XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
fi
echo "=================================="
echo "== Starting eNB soft modem"
if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
new_args=()
while [[ $# -gt 0 ]]; do
new_args+=("$1")
shift
done
for word in ${USE_ADDITIONAL_OPTIONS}; do
new_args+=("$word")
done
echo "${new_args[@]}"
exec "${new_args[@]}"
else
echo "$@"
exec "$@"
fi
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment