Merge remote-tracking branch 'origin/add-ru-docker-image' into integration_2021_wk22

ci-scripts/cls_containerize.py

@@ -150,6 +150,8 @@ class Containerize():
 					imageNames.append(('oai-nr-ue', 'nrUE'))
 					if self.host == 'Red Hat':
 						imageNames.append(('oai-physim', 'phySim'))
+					if self.host == 'Ubuntu':
+						imageNames.append(('oai-lte-ru', 'lteRU'))
 		if len(imageNames) == 0:
 			imageNames.append(('oai-enb', 'eNB'))
 		

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -260,8 +260,8 @@ NETWORK_CONTROLLER :
     FLEXRAN_AWAIT_RECONF   = "no";
 };
 
-     log_config :
-     {
+log_config :
+{
   global_log_level         ="info";
   global_log_verbosity     ="medium";
   hw_log_level             ="info";
@@ -276,4 +276,4 @@ NETWORK_CONTROLLER :
   pdcp_log_verbosity       ="medium";
   rrc_log_level            ="info";
   rrc_log_verbosity        ="medium";
-    };
+};

docker/Dockerfile.lteRU.rhel8.2

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for RHEL8
+#
+#---------------------------------------------------------------------
+
+FROM ran-build:latest AS ru-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --RU --ninja -w USRP --verbose-ci
+
+RUN yum install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
+
+#start from scratch for target executable
+FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ru
+ENV TZ=Europe/Paris
+
+RUN yum update -y && \
+    yum install -y --enablerepo="ubi-8-codeready-builder" \
+        tzdata \
+        atlas \
+        net-tools \
+        iputils \
+        iproute && \
+    echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
+    echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
+
+WORKDIR /opt/oai-lte-ru/bin
+COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
+COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
+
+WORKDIR /usr/local/lib/
+COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
+COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
+
+# Copying from the ran-build image the USRP needed packages
+COPY --from=ru-build /lib64/libconfig.so.9 /lib64
+COPY --from=ru-build /lib64/libblas.so.3 /lib64
+COPY --from=ru-build /lib64/liblapack.so.3 /lib64
+COPY --from=ru-build /lib64/liblapacke.so.3 /lib64
+COPY --from=ru-build /lib64/libboost_chrono.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_date_time.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_filesystem.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_program_options.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_serialization.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_thread.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_system.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_atomic.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_timer.so.1.66.0 /lib64
+COPY --from=ru-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
+
+RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
+    ldconfig
+
+# Copy the relevant configuration files for RRU
+WORKDIR /opt/oai-lte-ru/etc
+COPY --from=ru-build /oai-ran/docker/etc/rru* ./
+
+WORKDIR /opt/oai-lte-ru
+
+ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
+CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]

docker/Dockerfile.lteRU.ubuntu18

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for Ubuntu 18.04
+#
+#---------------------------------------------------------------------
+
+FROM ran-build:latest AS ru-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --RU --ninja -w USRP --verbose-ci
+
+RUN apt-get install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
+
+#start from scratch for target executable
+FROM ubuntu:bionic as oai-lte-ru
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Europe/Paris
+
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        tzdata \
+        software-properties-common \
+        libblas3 \
+        libatlas3-base \
+        libconfig9 \
+        net-tools \
+        iputils-ping \
+        iproute2 && \
+    # Install UHD driver from ettus ppa
+    # At time of writing, it is 3.14
+    add-apt-repository ppa:ettusresearch/uhd --yes && \
+    apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        python \
+        libusb-1.0-0 \
+        libuhd003 \
+        uhd-host && \
+    rm -rf /var/lib/apt/lists/*
+
+WORKDIR /opt/oai-lte-ru/bin
+COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
+COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
+
+WORKDIR /usr/local/lib/
+COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
+COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
+RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
+    ldconfig
+
+# Copy the relevant configuration files for RRU
+WORKDIR /opt/oai-lte-ru/etc
+COPY --from=ru-build /oai-ran/docker/etc/rru* ./
+
+WORKDIR /opt/oai-lte-ru
+
+ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
+CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]

docker/scripts/enb_entrypoint.sh

@@ -11,6 +11,8 @@ if [[ -v USE_FDD_DU ]]; then ln -s $PREFIX/etc/du.fdd.conf $PREFIX/etc/enb.conf;
 if [[ -v USE_FDD_MONO ]]; then ln -s $PREFIX/etc/enb.fdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_TDD_MONO ]]; then ln -s $PREFIX/etc/enb.tdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_FDD_FAPI_RCC ]]; then ln -s $PREFIX/etc/rcc.nfapi.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_TDD_IF4P5_RCC ]]; then ln -s $PREFIX/etc/rcc.if4p5.tdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/enb.conf; fi
 if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/enb.conf; fi
 

docker/scripts/enb_parameters.yaml

@@ -25,7 +25,7 @@
     dest_dir: docker/etc
     
 - configurations:
-  - filePrefix: cu
+  - filePrefix: cu.band7.tm1.25PRB
     outputfilename: "cu.fdd.conf"
     config:
     - key: Active_eNBs
@@ -68,7 +68,7 @@
     - key: ENB_IPV4_ADDRESS_FOR_X2C
       env: "@F1_CU_IP_ADDRESS@"
       
-  - filePrefix: du
+  - filePrefix: du.band7.tm1.25PRB
     outputfilename: "du.fdd.conf"
     config:
     - key: Active_eNBs
@@ -248,3 +248,89 @@
     - key: ENB_IPV4_ADDRESS_FOR_X2C
       env: "@F1_CU_IP_ADDRESS@"
 
+  - filePrefix: "rcc.band7.tm1.if4p5.lo.25PRB"
+    outputfilename: "rcc.if4p5.fdd.conf"
+    config:
+    - key: Active_eNBs
+      env: "@ENB_NAME@"
+    - key: eNB_name
+      env: "@ENB_NAME@"
+    - key: plmn_list
+      env:
+        mcc: "@MCC@"
+        mnc: "@MNC@"
+        mnc_length: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: eutra_band
+      env: "@UTRA_BAND_ID@"
+    - key: downlink_frequency
+      env: "@DL_FREQUENCY_IN_MHZ@000000"
+    - key: uplink_frequency_offset
+      env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
+    - key: Nid_cell
+      env: "@NID_CELL@"
+    - key: N_RB_DL
+      env: "@NB_PRB@"
+    - key: ipv4
+      env: "@MME_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1_MME
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1_MME
+      env: "@RCC_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1U
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1U
+      env: "@RCC_IP_ADDRESS@"
+    - key: ENB_IPV4_ADDRESS_FOR_X2C
+      env: "@RCC_IP_ADDRESS@"
+    - key: local_if_name
+      env: "@IF4P5_IF_NAME@"
+    - key: remote_address
+      env: "@IF4P5_RRU_IP_ADDRESS@"
+    - key: local_address
+      env: "@IF4P5_RCC_IP_ADDRESS@"
+
+  - filePrefix: "rcc.band40.tm1.25PRB"
+    outputfilename: "rcc.if4p5.tdd.conf"
+    config:
+    - key: Active_eNBs
+      env: "@ENB_NAME@"
+    - key: eNB_name
+      env: "@ENB_NAME@"
+    - key: plmn_list
+      env:
+        mcc: "@MCC@"
+        mnc: "@MNC@"
+        mnc_length: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: eutra_band
+      env: "@UTRA_BAND_ID@"
+    - key: downlink_frequency
+      env: "@DL_FREQUENCY_IN_MHZ@000000"
+    - key: uplink_frequency_offset
+      env: "@UL_FREQUENCY_OFFSET_IN_MHZ@000000"
+    - key: Nid_cell
+      env: "@NID_CELL@"
+    - key: N_RB_DL
+      env: "@NB_PRB@"
+    - key: ipv4
+      env: "@MME_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1_MME
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1_MME
+      env: "@RCC_S1C_IP_ADDRESS@"
+    - key: ENB_INTERFACE_NAME_FOR_S1U
+      env: "@RCC_IF_NAME@"
+    - key: ENB_IPV4_ADDRESS_FOR_S1U
+      env: "@RCC_IP_ADDRESS@"
+    - key: ENB_IPV4_ADDRESS_FOR_X2C
+      env: "@RCC_IP_ADDRESS@"
+    - key: local_if_name
+      env: "@IF4P5_IF_NAME@"
+    - key: remote_address
+      env: "@IF4P5_RRU_IP_ADDRESS@"
+    - key: local_address
+      env: "@IF4P5_RCC_IP_ADDRESS@"
+

docker/scripts/generateTemplate.py

@@ -39,20 +39,24 @@ def main():
   for config in data[1]["configurations"]:
     filePrefix = config["filePrefix"]
     outputfilename = config["outputfilename"]
+    print('================================================')
     print('filePrefix = ' + filePrefix)
     print('outputfilename = ' + outputfilename)
     for inputfile in dir:
       if inputfile.find(filePrefix) >=0:
-        prefix_outputfile = {"cu": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}', 
-                             "du": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+        prefix_outputfile = {"cu.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}', 
+                             "du.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.fdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.tdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band7.tm1.25PRB.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band40.tm1.25PRB.FairScheduler.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "rcc.band7.tm1.if4p5.lo.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "rcc.band40.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue_sim_ci": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
                              }
+        print('inputfile = ' + inputfile)
         if filePrefix in prefix_outputfile:
           outputfile1 = prefix_outputfile[filePrefix]  
       

docker/scripts/lte_ru_entrypoint.sh

+#!/bin/bash
+
+set -euo pipefail
+
+PREFIX=/opt/oai-lte-ru
+
+# Based another env var, pick one template to use
+if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/rru.conf; fi
+if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/rru.conf; fi
+
+# Only this template will be manipulated
+CONFIG_FILES=`ls $PREFIX/etc/rru.conf || true`
+
+for c in ${CONFIG_FILES}; do
+    # grep variable names (format: ${VAR}) from template to be rendered
+    VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
+
+    # create sed expressions for substituting each occurrence of ${VAR}
+    # with the value of the environment variable "VAR"
+    EXPRESSIONS=""
+    for v in ${VARS}; do
+        NEW_VAR=`echo $v | sed -e "s#@##g"`
+        if [[ "${!NEW_VAR}x" == "x" ]]; then
+            echo "Error: Environment variable '${NEW_VAR}' is not set." \
+                "Config file '$(basename $c)' requires all of $VARS."
+            exit 1
+        fi
+        EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
+    done
+    EXPRESSIONS="${EXPRESSIONS#';'}"
+
+    # render template and inline replace config file
+    sed -i "${EXPRESSIONS}" ${c}
+done
+
+# Load the USRP binaries
+if [[ -v USE_B2XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
+elif [[ -v USE_X3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
+elif [[ -v USE_N3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
+fi
+
+echo "=================================="
+echo "== Starting eNB soft modem"
+if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
+    echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
+    new_args=()
+    while [[ $# -gt 0 ]]; do
+        new_args+=("$1")
+        shift
+    done
+    for word in ${USE_ADDITIONAL_OPTIONS}; do
+        new_args+=("$word")
+    done
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+else
+    echo "$@"
+    exec "$@"
+fi