Update TESTING_GNB_W_COTS_UE.md

doc/TESTING_GNB_W_COTS_UE.md

@@ -35,9 +35,6 @@ for reference:
 https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/docs/DEPLOY_HOME.md
 
 
-```
-sudo 
-```
 
 - **eNB**
 
@@ -51,44 +48,136 @@ sudo
 sudo 
 ```
 
-## Conf Files
+## Configuration Files
 
-where are the config files located
-how to use them
+Each component (EPC, eNB, gNB) has its own configuration file.  
+These config files are passed as arguments of the run command line, using the option -O \<conf file\>
 
-## Run / Test
+Some config examples can be found in the following folder:  
+https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/develop/targets/PROJECTS/GENERIC-LTE-EPC/CONF
 
+These files have to be updated manually to set the IP addresses and frequency.  
 
-- **EPC** (on EPC host):
+1- In the **eNB configuration file** :
+- look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
+```
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "**YOUR_EPC_IP_ADDR**";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
 
 ```
-sudo 
+
+- look for S1 IP address, and update the **3 fields below** with the IP address of the **eNB** server  
 ```
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "**YOUR_ENB_IP_ADDR**";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "**YOUR_ENB_IP_ADDR**";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "**YOUR_ENB_IP_ADDR**";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
 
-Open another window and:
+```
 
+2- In the **gNB configuration file** :
+- look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
+```
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "**YOUR_EPC_IP_ADDR**";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+```
+- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server (notice : even if -in principle- S1 MME is not required for gNB setting)
 ```
-sudo bash
-cd /opt/ltebox/tools
 
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "**YOUR_ENB_IP_ADDR**";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "**YOUR_ENB_IP_ADDR**";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "**YOUR_ENB_IP_ADDR**";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "**YOUR_ENB_IP_ADDR**";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+
+    
 ```
 
-Note: when terminated the testing session, you shall stop the EPC by "./stop_ltebox"
 
 
-- **eNB** (on the eNB host):
+3- The frequency setting requires a manual update in the .C and in the gNB conf file:
 
-~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf (-E)
 
+In the C file **openair2/RRC/LTE/rrc_eNB.c:3217**  
+set the nrarfcn to the same value as absoluteFrequencySSB in the **gNB config file**, that is **641272** in the example below 
+
+C file :
+```
+MeasObj2->measObject.choice.measObjectNR_r15.carrierFreq_r15 =641272;
+```
 
-eNB is using branch NR_RRCConfiguration patched with enb.diff
+gNB config file :
+
+```
+    # absoluteFrequencySSB is the central frequency of SSB 
+    absoluteFrequencySSB                                          = 641272; 
+    dl_frequencyBand                                                 = 78;
+    # the carrier frequency is assumed to be in the middle of the carrier, i.e. dl_absoluteFrequencyPointA_kHz + dl_carrierBandwidth*12*SCS_kHz/2
+    dl_absoluteFrequencyPointA                                       = 640000;
+    #scs-SpecificCarrierList
+    dl_offstToCarrier                                              = 0;
+    # subcarrierSpacing
+    # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+    dl_subcarrierSpacing                                           = 1;
+    dl_carrierBandwidth                                            = 106;
+```
+
+
+## Run / Test
+
+
+- **EPC** (on EPC host):
+
+for reference:
+https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/docs/DEPLOY_HOME.md
+
+
+
+- **eNB** (on the eNB host):
+
+```
+~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf (-E)
+```
 
 
 - **gNB** (on the gNB host)
 
+```
 ~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf (-E)
-
-Note: gNB is using branch NR_RRC_PRACH_procedures patched with gnb.diff
+```
 
 
 ## Test Case
@@ -97,20 +186,38 @@ Test case description  : UE attachement
 
 ## Expected Logs to check
 
-what logs and where to check, to ensure that your setup works fine
+what logs and where to check, to ensure that your setup works fine (or not ...)
 
 ## Required traces for debug
 
 What info/traces/logs are needed for us to support the debug
 
 ## Status of the interoperability
-- setup of the CP in 4G
-- setup of the measurements in 5G
-- Random access procedure initiation by the UE in the 5G cell
-- msg1, msg2, msg3 correctly exchanged and decoded
+
+The following parts have been validated with FR1 COTS UE:
+
+- Phone accepts the configurtion provided by OAI eNB:  
+    this validates RRC and X2AP  
+
+- Successful Random Access Procedure:  
+    PRACH is correctly decoded at gNB  
+    Phone correctly receives and decodes msg2 (NR PDCCH Format 1_0 and NR PDSCH)  
+    msg3  is transmitted to gNB according to the configuration sent in msg2, and received correctly at gNB    
+
+- Successful path switch of user plane traffic from 4G to 5G cell (E-RAB modification message):  
+   this validates S1AP  
+
+- Downlink traffic:  
+    PDCCH DCI format 1_1 and correponding PDSCH are decoded correctlyby the phone  
+    ACK/NACK (PUCCH format 0) are successfully received at gNB  
+
+- On going:  
+    validation of HARQ procedures  
+    Integration with higher layers to replace dummy data with real traffic  
+    
+- Known limitations as of May 2020:  
+    only dummy DL traffic  
+    no UL traffic  
+    no end-to-end traffic possible  
 
 
-[enb.conf](uploads/48bbbcc8016a33ce6d2faf62e3845005/enb.conf)
-[enb.diff](uploads/9763bd6d18256612d007251bc371ca46/enb.diff)
-[gnb.conf](uploads/59ae03deccb2186f544451034c297838/gnb.conf)
-[gnb.diff](uploads/bb756b2b165cb70f89405d7a8c4c36a8/gnb.diff)
\ No newline at end of file