Skip to content

O
OpenXG-RAN
Commit 6cb52cf2 authored by Robert Schmidt's avatar Robert Schmidt
Browse files
Options

Merge remote-tracking branch 'origin/ci-add-fdd-test' into integration_2023_w49

parents 889a1164 a402e11b
Hide whitespace changes
Inline Side-by-side
Showing with 234 additions and 20 deletions
ci-scripts/conf_files/gnb-cu.sa.band78.106prb.usrpb200.conf → ci-scripts/conf_files/gnb-cu.sa.f1.conf
View file @ 6cb52cf2
......@@ -78,12 +78,8 @@ security = {
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="debug";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
ngap_log_level ="debug";
f1ap_log_level ="info";
ngap_log_level ="info";
};
ci-scripts/conf_files/gnb-du.sa.band1.52prb.usrpb210.conf 0 → 100644
View file @ 6cb52cf2
Active_gNBs = ( "gNB-Eurecom-DU");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_DU_ID = 0xe00;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-DU";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
nr_cellid = 12345678L;
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 423130;
dl_frequencyBand = 1;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 422194;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 0;
dl_carrierBandwidth = 52;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 14025; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 0;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 7;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 1;
ul_absoluteFrequencyPointA = 384194;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 0;
ul_carrierBandwidth = 52;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 14025;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 0;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -90;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 0,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
n_TimingAdvanceOffset = 0;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 0;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 0;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "f1";
local_n_if_name = "eth0";
local_n_address = "192.168.68.195";
remote_n_address = "192.168.68.194";
local_n_portc = 500;
local_n_portd = 2153;
remote_n_portc = 501;
remote_n_portd = 2153;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
ulsch_max_frame_inactivity = 1;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
# The higher att for TX than RX is because we use a circulator (as for TDD),
# while we should use a duplexer in the FDD case. However, it uses the same setup.
att_tx = 18
att_rx = 0;
bands = [1];
max_pdschReferenceSignalPower = -27;
max_rxgain = 108;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config : {
global_log_level = "info";
};
ci-scripts/xml_files/container_sa_f1_b200_quectel.xml
View file @ 6cb52cf2
......@@ -22,7 +22,7 @@
-->
<testCaseList>
<htmlTabRef>TEST-SA-FR1-F1-B200</htmlTabRef>
<htmlTabName>40 MHz TDD F1 SA</htmlTabName>
<htmlTabName>10 MHz FDD F1 SA</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<repeatCount>1</repeatCount>
<TestCaseRequestedList>
......@@ -89,11 +89,11 @@
<testCase id="130102">
<class>Deploy_Object</class>
<desc>Deploy gNB-DU (TDD/Band78/40MHz/B200) in a container</desc>
<desc>Deploy gNB-DU (FDD/Band1/10MHz/B200) in a container</desc>
<yaml_path>ci-scripts/yaml_files/sa_f1_b200_gnb</yaml_path>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<services>gnb_du_tdd</services>
<services>gnb_du_fdd</services>
</testCase>
<testCase id="100000">
......@@ -159,8 +159,8 @@
<testCase id="170000">
<class>Iperf</class>
<desc>iperf (DL/80Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 80M -t 30 -i 1 -fm</iperf_args>
<desc>iperf (DL/50Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 50M -t 30 -i 1 -fm</iperf_args>
<direction>DL</direction>
<id>idefix</id>
<iperf_packetloss_threshold>10</iperf_packetloss_threshold>
......@@ -170,8 +170,8 @@
<testCase id="170001">
<class>Iperf</class>
<desc>iperf (UL/8Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 8M -t 30 -i 1 -fm</iperf_args>
<desc>iperf (UL/25Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 25M -t 30 -i 1 -fm</iperf_args>
<direction>UL</direction>
<id>idefix</id>
<iperf_packetloss_threshold>1</iperf_packetloss_threshold>
......@@ -181,8 +181,8 @@
<testCase id="170002">
<class>Iperf</class>
<desc>iperf (BIDIR TCP)(20 sec)(single-ue profile)</desc>
<iperf_args>-t 20 --bidir</iperf_args>
<desc>iperf (BIDIR TCP)(60 sec)(single-ue profile)</desc>
<iperf_args>-t 60 --bidir</iperf_args>
<direction>BIDIR</direction>
<id>idefix</id>
<iperf_profile>single-ue</iperf_profile>
......
ci-scripts/yaml_files/sa_f1_b200_gnb/docker-compose.yml
View file @ 6cb52cf2
......@@ -8,7 +8,7 @@ services:
environment:
USE_ADDITIONAL_OPTIONS: --sa --telnetsrv --telnetsrv.shrmod ci --log_config.global_log_options level,nocolor,time,line_num,function
volumes:
- ../../conf_files/gnb-cu.sa.band78.106prb.usrpb200.conf:/opt/oai-gnb/etc/gnb.conf
- ../../conf_files/gnb-cu.sa.f1.conf:/opt/oai-gnb/etc/gnb.conf
networks:
public_net:
ipv4_address: 192.168.68.194
......@@ -20,15 +20,15 @@ services:
timeout: 5s
retries: 5
gnb_du_tdd:
gnb_du_fdd:
image: oai-gnb:latest
privileged: true
container_name: sa-du-b200-gnb
environment:
USE_B2XX: 'yes'
USE_ADDITIONAL_OPTIONS: --sa --RUs.[0].sdr_addrs serial=30C51D4 --continuous-tx -E --telnetsrv --telnetsrv.shrmod ci --log_config.global_log_options level,nocolor,time,line_num,function --gNBs.[0].min_rxtxtime 2 --gNBs.[0].do_CSIRS 1 --gNBs.[0].do_SRS 1 --RUs.[0].att_rx 18 --RUs.[0].att_tx 18
USE_ADDITIONAL_OPTIONS: --sa --RUs.[0].sdr_addrs serial=30C51D4 --telnetsrv --telnetsrv.shrmod ci --log_config.global_log_options level,nocolor,time,line_num,function --gNBs.[0].min_rxtxtime 2 --gNBs.[0].do_CSIRS 1 --gNBs.[0].do_SRS 0 --MACRLCs.[0].ul_max_mcs 28 --L1s.[0].max_ldpc_iterations 20
volumes:
- ../../conf_files/gnb-du.sa.band78.106prb.usrpb200.conf:/opt/oai-gnb/etc/gnb.conf
- ../../conf_files/gnb-du.sa.band1.52prb.usrpb210.conf:/opt/oai-gnb/etc/gnb.conf
- /dev:/dev
networks:
public_net:
......
openair2/F1AP/f1ap_cu_interface_management.c
View file @ 6cb52cf2
......@@ -152,7 +152,7 @@ int CU_handle_F1_SETUP_REQUEST(instance_t instance, sctp_assoc_t assoc_id, uint3
}
FDDs->dl_freqinfo.arfcn = fDD_Info->dL_NRFreqInfo.nRARFCN;
int dlBands=fDD_Info->dL_NRFreqInfo.freqBandListNr.list.count;
AssertFatal(dlBands == 0, "cannot handled more than one frequency band\n");
AssertFatal(dlBands == 1, "cannot handled more than one frequency band\n");
for (int dlB=0; dlB < dlBands; dlB++) {
F1AP_FreqBandNrItem_t * FreqItem=fDD_Info->dL_NRFreqInfo.freqBandListNr.list.array[dlB];
FDDs->dl_freqinfo.band = FreqItem->freqBandIndicatorNr;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment