Commit 1426fd81 authored by Jerome Peraldi's avatar Jerome Peraldi

Merge branch 'private/bugz128623' into 'sqn/3GPP_TTCN_System_Simulator'

Bugz #128623 - Run TTCN + gNB + OAI UE + Proxy without VT on HW setup

See merge request sequans/system/ttcn/openairinterface5g!29
parents aeb1ef85 a8b14786
This diff is collapsed.
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs = (
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; sd = 1; }); });
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 1;
do_CSIRS = 0;
do_SRS = 0;
#ul_prbblacklist = "135,136,137,138"
pdcch_ConfigSIB1 = ({
controlResourceSetZero = 12;
searchSpaceZero = 10;
});
servingCellConfigCommon = (
{
# spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
# frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3954.72
absoluteFrequencySSB = 623424;#621312;
dl_frequencyBand = 78;
# this is 3900.60 MHz
dl_absoluteFrequencyPointA = 622152; #620040;
# scs-SpecificCarrierList
dl_offstToCarrier = 0;
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
# initialDownlinkBWP
# genericParameters
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
# pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
# uplinkConfigCommon
# frequencyInfoUL
ul_frequencyBand = 78;
# scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
# initialUplinkBWP
# genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
# rach-ConfigCommon
# rach-ConfigGeneric
prach_ConfigurationIndex = 98;
# prach_msg1_FDM
# 0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -90;
# preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
# powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
# ra_ReponseWindow
# 1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
# ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
# 1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
# oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
# ra_ContentionResolutionTimer
# (0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
# prach-RootSequenceIndex_PR
# 1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = (
{
ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "enp6s0";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "10.87.0.21";
GNB_INTERFACE_NAME_FOR_NGU = "enp6s0";
GNB_IPV4_ADDRESS_FOR_NGU = "10.87.0.21";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
}
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 300;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 100;
ulsch_max_frame_inactivity = 10;
ul_max_mcs = 28;
#dl_harq_round_max = 1;
#ul_harq_round_max = 1;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1;
nb_rx = 1;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.20.2,addr=192.168.20.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="info";
};
...@@ -1368,7 +1368,9 @@ void fill_initial_cellGroupConfig(int uid, ...@@ -1368,7 +1368,9 @@ void fill_initial_cellGroupConfig(int uid,
cellGroupConfig->cellGroupId = 0; cellGroupConfig->cellGroupId = 0;
if (RC.ss.mode >= SS_SOFTMODEM) { /* Rlc Bearer Config */
/* TS38.331 9.2.1 Default SRB configurations */
if (RC.ss.mode == SS_SOFTMODEM) {
NR_RLC_BearerConfig_t * ss_rlc_BearerConfig = NULL; NR_RLC_BearerConfig_t * ss_rlc_BearerConfig = NULL;
/*SRB1 SS RLC_BearerConfig */ /*SRB1 SS RLC_BearerConfig */
int rbIndex = 1; int rbIndex = 1;
...@@ -1391,7 +1393,8 @@ void fill_initial_cellGroupConfig(int uid, ...@@ -1391,7 +1393,8 @@ void fill_initial_cellGroupConfig(int uid,
cellGroupConfig->sCellToReleaseList = NULL; cellGroupConfig->sCellToReleaseList = NULL;
return; return;
*/ */
}else { } else {
/* We cover OAI native setup and TTCN SRB port "only" configuration */
/* Rlc Bearer Config */ /* Rlc Bearer Config */
/* TS38.331 9.2.1 Default SRB configurations */ /* TS38.331 9.2.1 Default SRB configurations */
cellGroupConfig->rlc_BearerToAddModList = calloc(1, sizeof(*cellGroupConfig->rlc_BearerToAddModList)); cellGroupConfig->rlc_BearerToAddModList = calloc(1, sizeof(*cellGroupConfig->rlc_BearerToAddModList));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment