Commit 86379e33 authored by Raphael Defosseux's avatar Raphael Defosseux

review-comments

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 38aec139
...@@ -509,7 +509,7 @@ sudo /usr/local/bin/dpdk-devbind.py --unbind <lspci-address-u-plane-vf> ...@@ -509,7 +509,7 @@ sudo /usr/local/bin/dpdk-devbind.py --unbind <lspci-address-u-plane-vf>
```bash ```bash
cd ran_build/build cd ran_build/build
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/oran.fh.band78.fr1.273PRB.conf --sa --reorder-thread-disable --thread-pool <list of non isolated cpus> sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/oran.fh.band78.fr1.273PRB.conf --sa --reorder-thread-disable 1 --thread-pool <list of non isolated cpus>
``` ```
For example if you have two numa nodes (for example 18 CPU per socket) in your system and odd cores are non isolated then you can put the thread-pool on `1,3,5,7,9,11,13,15`. Else if you have 1 numa node either you can use isolated cores or non isolated. Just make sure that isolated cores are not the ones defined earlier. For example if you have two numa nodes (for example 18 CPU per socket) in your system and odd cores are non isolated then you can put the thread-pool on `1,3,5,7,9,11,13,15`. Else if you have 1 numa node either you can use isolated cores or non isolated. Just make sure that isolated cores are not the ones defined earlier.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment