Skip to content

O
OpenXG-RAN
Commit caeedc04 authored by YanKuo's avatar YanKuo
Browse files
Options

add OXGRF support

parent 102965a6
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 6619 additions and 11 deletions
cmake_targets/build_oai
View file @ caeedc04
......@@ -89,7 +89,7 @@ Options:
--UE-conf-nvram [configuration file]
Specify conf_nvram_path (default \"$conf_nvram_path\")
-w | --hardware
USRP, BLADERF, LMSSDR, IRIS, SIMU, AW2SORI, AERIAL, None (Default)
USRP, BLADERF, LMSSDR, IRIS, SIMU, AW2SORI, AERIAL, OXGRF, None (Default)
Adds this RF board support (in external packages installation and in compilation)
-t | --transport
Selects the transport protocol type, options: None, Ethernet, oran_fhlib_5g, oran_fhlib_5g_mplane, WLS
......@@ -246,7 +246,7 @@ function main() {
shift 2;;
-w | --hardware)
case "$2" in
"USRP" | "BLADERF" | "LMSSDR" | "IRIS")
"USRP" | "BLADERF" | "LMSSDR" | "IRIS" | "OXGRF")
HW="OAI_"$2
TARGET_LIST="$TARGET_LIST oai_${2,,}devif" # ,, makes lowercase
CMAKE_CMD="$CMAKE_CMD -DOAI_$2=ON"
......@@ -431,6 +431,10 @@ function main() {
flash_firmware_bladerf
fi
fi
if [ "$HW" == "OAI_OXGRF" ] ; then
echo_info "installing packages for OXGRF support"
#check_install_oxgrf_driver
fi
if [ "$HW" == "OAI_IRIS" ] ; then
echo_info "installing packages for IRIS support"
check_install_soapy
......
cmake_targets/tools/build_helper
View file @ caeedc04
......@@ -330,6 +330,34 @@ install_usrp_uhd_driver() {
fi
}
check_install_oxgrf_driver() {
#if modinfo riffa > /dev/null 2>&1
if modinfo xdma > /dev/null 2>&1
then
echo_success "OXGRF driver has loaded."
else
git clone https://github.com/v3best/riffa /tmp/riffa
if [ $? -ne 0 ]; then
echo_fatal "OXGRF driver download failed, please check your net connection."
else
cd /tmp/riffa/driver/linux
make && $SUDO make install
echo_success "OXGRF driver install success, please restart your PC later."
fi
git clone https://github.com/v3best/liboxgrf /tmp/liboxgrf
if [ $? -ne 0 ]; then
echo_fatal "OXGRF API download failed, please check your net connection."
else
cd /tmp/liboxgrf
mkdir build
cd build
cmake ../
make && $SUDO make install && $SUDO ldconfig
echo_success "OXGRF API install success, please restart your PC later."
fi
fi
}
install_bladerf_driver_from_source(){
echo_info "\nInstalling BladeRF driver from sources."
cd /tmp
......@@ -566,8 +594,9 @@ install_asn1c_from_source(){
$SUDO $INSTALLER -y install bison flex
$SUDO rm -rf /tmp/asn1c
# GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
git clone https://github.com/mouse07410/asn1c /tmp/asn1c
cd /tmp/asn1c
#git clone https://github.com/mouse07410/asn1c /tmp/asn1c
git clone https://gitee.com/chloeely/asn1c.git /tmp/asn1c
cd /tmp/asn1c
#git checkout vlm_master
# hotfix: current vlm_master (5fa129cf3161da9ff2d67341e6277e818c0f5d6a)
# breaks F1, NG, so use the one before.
......@@ -589,8 +618,9 @@ install_simde_from_source(){
echo_info "\nInstalling SIMDE from source without test cases (header files only)"
cd /tmp
$SUDO rm -rf /tmp/simde
git clone https://github.com/simd-everywhere/simde-no-tests.git /tmp/simde
cd /tmp/simde
# git clone https://github.com/simd-everywhere/simde-no-tests.git /tmp/simde
git clone https://gitee.com/chloeely/simde.git /tmp/simde
cd /tmp/simde
# we can specify a given version of SIMDE (sha-one or tag)
if [[ -v SIMDE_VERSION ]]; then
git checkout -f $SIMDE_VERSION
......@@ -604,6 +634,26 @@ install_simde_from_source(){
$SUDO \cp -rv ../simde /usr/include
}
install_oxgrf_from_source(){
echo_info "\nInstalling OXGRF from source without test cases (header files only)"
if [ ! -f /usr/local/include/oxgrf_api_ss.h ]; then
cp $OPENAIR_DIR/radio/OXGRF/oxgrf_api_ss.h /usr/local/include
$SUDO chmod +x /usr/local/include/oxgrf_api_ss.h
echo "oxgrf_api_ss.h installed successfully"
else
echo "oxgrf_api_ss.h is already existed"
fi
if [ ! -f /usr/local/include/liboxgrf_ss.so ]; then
cp $OPENAIR_DIR/radio/OXGRF/liboxgrf_ss.so /usr/local/lib
$SUDO chmod +x /usr/local/lib/liboxgrf_ss.so
$SUDO ldconfig /usr/local/lib
echo "liboxgrf_ss.so installed successfully"
else
echo "liboxgrf_ss.so is already existed"
fi
}
install_lttng() {
if [[ "$OS_DISTRO" != "ubuntu" ]]; then
echo_info "LTTng is supported only for ubuntu at the moment."
......
executables/lte-ru.c
View file @ caeedc04
......@@ -765,7 +765,7 @@ void tx_rf(RU_t *ru,
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0);
// AssertFatal(txs == siglen+sf_extension,"TX : Timeout (sent %d/%d)\n",txs, siglen);
if (usrp_tx_thread == 0 && (txs != siglen + sf_extension)
if (usrp_tx_thread == 0 && oxgrf_tx_thread == 0 && (txs != siglen + sf_extension)
&& (late_control == STATE_BURST_NORMAL)) { /* add fail safe for late command */
late_control = STATE_BURST_TERMINATE;
LOG_E(PHY, "TX : Timeout (sent %d/%d) state =%d\n", txs, siglen, late_control);
......@@ -1588,7 +1588,7 @@ static void *ru_thread( void *param ) {
pthread_cond_signal(&proc->cond_FH1);
AssertFatal((ret=pthread_mutex_unlock(&proc->mutex_FH1))==0,"mutex_unlock returns %d\n",ret);
if(usrp_tx_thread == 1){
if(usrp_tx_thread == 1 || oxgrf_tx_thread == 1){
if (ru->start_write_thread){
if(ru->start_write_thread(ru) != 0){
LOG_E(HW,"Could not start tx write thread\n");
......
executables/lte-softmodem.h
View file @ caeedc04
......@@ -71,6 +71,7 @@
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_OXGRF_ARGS "set the arguments to identify OXGRF\n"
#define CONFIG_HLP_DMAMAP "use DMA memory mapping\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
......@@ -94,6 +95,7 @@
{"r" , CONFIG_HLP_PRB, 0, .u8ptr=&(frame_parms[0]->N_RB_DL), .defintval=25, TYPE_UINT8, 0}, \
{"dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, .iptr=(int32_t *)&dlsch_demod_shift, .defintval=0, TYPE_INT, 0}, \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, .strptr=&usrp_args, .defstrval="type=b200",TYPE_STRING, 0}, \
{"oxgrf-args", CONFIG_HLP_OXGRF_ARGS, 0, .strptr=&oxgrf_args, .defstrval="dev=pciex:0",TYPE_STRING, 0}, \
{"mmapped-dma", CONFIG_HLP_DMAMAP, PARAMFLAG_BOOL, .uptr=&mmapped_dma, .defintval=0, TYPE_INT, 0}, \
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, .iptr=&tddflag, .defintval=0, TYPE_INT, 0}, \
{"ue-idx-standalone", NULL, 0, .u16ptr=&ue_idx_standalone, .defuintval=0xFFFF, TYPE_UINT16, 0}, \
......@@ -129,6 +131,7 @@ extern double cpuf;
extern int numerology;
extern int usrp_tx_thread;
extern int oxgrf_tx_thread;
// In lte-enb.c
extern void stop_eNB(int);
......
executables/lte-uesoftmodem.c
View file @ caeedc04
......@@ -144,6 +144,8 @@ int transmission_mode=1;
char *usrp_args=NULL;
char *usrp_clksrc=NULL;
char *oxgrf_args=NULL;
THREAD_STRUCT thread_struct;
/* struct for ethernet specific parameters given in eNB conf file */
eth_params_t *eth_params;
......@@ -406,6 +408,7 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
}
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
if (oxgrf_args) openair0_cfg[card].sdr_addrs = oxgrf_args;
}
}
......
executables/nr-ru.c
View file @ caeedc04
......@@ -1121,7 +1121,7 @@ void *ru_thread(void *param)
LOG_I(PHY, "RU %d RF started cpu_meas_enabled %d\n", ru->idx, cpu_meas_enabled);
// start trx write thread
if (usrp_tx_thread == 1) {
if (usrp_tx_thread == 1 || oxgrf_tx_thread == 1) {
if (ru->start_write_thread) {
if (ru->start_write_thread(ru) != 0) {
LOG_E(HW, "Could not start tx write thread\n");
......
executables/nr-softmodem-common.h
View file @ caeedc04
......@@ -84,12 +84,15 @@
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_TX_SUBDEV "set the arguments to select tx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_RX_SUBDEV "set the arguments to select rx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_OXGRF_ARGS "set the arguments to identify OXGRF\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
......@@ -134,5 +137,6 @@ extern double cpuf;
extern int numerology;
extern int usrp_tx_thread;
extern int oxgrf_tx_thread;
void wait_gNBs(void);
#endif
executables/nr-softmodem.h
View file @ caeedc04
......@@ -25,6 +25,7 @@
{"T" , CONFIG_HLP_ULBW_PHYTEST, 0, .uptr=&target_ul_bw, .defintval=0, TYPE_UINT, 0}, \
{"D" , CONFIG_HLP_DLBM_PHYTEST, 0, .u64ptr=&dlsch_slot_bitmap, .defintval=0, TYPE_UINT64, 0}, \
{"U" , CONFIG_HLP_ULBM_PHYTEST, 0, .u64ptr=&ulsch_slot_bitmap, .defintval=0, TYPE_UINT64, 0}, \
{"sdr-tx-thread-config", CONFIG_HLP_OXGRF_THREAD, 0, .iptr=&oxgrf_tx_thread, .defstrval=0, TYPE_INT, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, .iptr=&usrp_tx_thread, .defstrval=0, TYPE_INT, 0}, \
{"uecap_file", CONFIG_HLP_UECAP_FILE, 0, .strptr=&uecap_file, .defstrval="./uecap_ports1.xml", TYPE_STRING, 0}, \
}
......
executables/nr-ue.c
View file @ caeedc04
......@@ -763,7 +763,7 @@ void *UE_thread(void *arg)
UE->is_synchronized = 0;
int tmp2 = UE->rfdevice.trx_start_func(&UE->rfdevice);
AssertFatal(tmp2 == 0, "Could not start the device\n");
if (usrp_tx_thread == 1)
if (usrp_tx_thread == 1 || oxgrf_tx_thread == 1)
UE->rfdevice.trx_write_init(&UE->rfdevice);
InitSinLUT();
......
executables/nr-uesoftmodem.c
View file @ caeedc04
......@@ -279,6 +279,8 @@ void init_openair0(PHY_VARS_NR_UE *ue)
cfg->tx_subdev = get_nrUE_params()->tx_subdev;
if (get_nrUE_params()->rx_subdev)
cfg->rx_subdev = get_nrUE_params()->rx_subdev;
if (get_nrUE_params()->oxgrf_args)
cfg->sdr_addrs = get_nrUE_params()->oxgrf_args;
}
}
......
executables/nr-uesoftmodem.h
View file @ caeedc04
......@@ -46,6 +46,7 @@ extern uint16_t ue_id_g;
// clang-format off
#define CMDLINE_NRUEPARAMS_DESC { \
{"usrp-args", CONFIG_HLP_USRP_ARGS, 0, .strptr=&nrUE_params.usrp_args, .defstrval="type=b200", TYPE_STRING, 0}, \
{"oxgrf-args", CONFIG_HLP_OXGRF_ARGS, 0, .strptr=&nrUE_params.oxgrf_args, .defstrval="dev=pciex:0", TYPE_STRING, 0}, \
{"tx_subdev", CONFIG_HLP_TX_SUBDEV, 0, .strptr=&nrUE_params.tx_subdev, .defstrval=NULL, TYPE_STRING, 0}, \
{"rx_subdev", CONFIG_HLP_RX_SUBDEV, 0, .strptr=&nrUE_params.rx_subdev, .defstrval=NULL, TYPE_STRING, 0}, \
{"dlsch-parallel", CONFIG_HLP_DLSCH_PARA, 0, .u8ptr=NULL, .defintval=0, TYPE_UINT8, 0}, \
......@@ -113,6 +114,7 @@ typedef struct {
int cont_fo_comp;
int agc;
char *usrp_args;
char *oxgrf_args;
char *tx_subdev;
char *rx_subdev;
char *reconfig_file;
......
executables/softmodem-common.c
View file @ caeedc04
......@@ -44,6 +44,7 @@
char *parallel_config=NULL;
char *worker_config=NULL;
int usrp_tx_thread = 0;
int oxgrf_tx_thread = 0;
uint8_t nfapi_mode=0;
static struct timespec start;
......
executables/softmodem-common.h
View file @ caeedc04
......@@ -99,10 +99,12 @@ extern "C"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
#define CONFIG_HLP_RFSIM "Run in rf simulator mode\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NFAPI "Change the nFAPI mode for NR 'MONOLITHIC', 'PNF', 'VNF', 'AERIAL','UE_STUB_PNF','UE_STUB_OFFNET','STANDALONE_PNF'\n"
#define CONFIG_HLP_CONTINUOUS_TX "perform continuous transmission, even in TDD mode (to work around USRP issues)\n"
......@@ -142,6 +144,7 @@ extern "C"
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
extern int oxgrf_tx_thread;
extern int usrp_tx_thread;
// clang-format off
#define CMDLINE_PARAMS_DESC { \
......@@ -169,6 +172,7 @@ extern int usrp_tx_thread;
{"chest-time", CONFIG_HLP_CHESTTIME, 0, .iptr=&CHEST_TIME, .defintval=0, TYPE_INT, 0}, \
{"nsa", CONFIG_HLP_NSA, PARAMFLAG_BOOL, .iptr=&NSA, .defintval=0, TYPE_INT, 0}, \
{"node-number", NULL, 0, .u16ptr=&NODE_NUMBER, .defuintval=0, TYPE_UINT16, 0}, \
{"sdr-tx-thread-config", CONFIG_HLP_OXGRF_THREAD, 0, .iptr=&oxgrf_tx_thread, .defstrval=0, TYPE_INT, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, .iptr=&usrp_tx_thread, .defstrval=0, TYPE_INT, 0}, \
{"nfapi", CONFIG_HLP_NFAPI, 0, .strptr=NULL, .defstrval="MONOLITHIC", TYPE_STRING, 0}, \
{"non-stop", CONFIG_HLP_NONSTOP, PARAMFLAG_BOOL, .iptr=&NON_STOP, .defintval=0, TYPE_INT, 0}, \
......@@ -211,6 +215,7 @@ extern int usrp_tx_thread;
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s3a = { config_checkstr_assign_integer, \
{"MONOLITHIC", "PNF", "VNF", "AERIAL","UE_STUB_PNF","UE_STUB_OFFNET","STANDALONE_PNF"}, \
{NFAPI_MONOLITHIC, NFAPI_MODE_PNF, NFAPI_MODE_VNF, NFAPI_MODE_AERIAL,NFAPI_UE_STUB_PNF,NFAPI_UE_STUB_OFFNET,NFAPI_MODE_STANDALONE_PNF}, \
......@@ -346,6 +351,7 @@ char *get_softmodem_function(void);
void set_softmodem_sighandler(void);
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int oxgrf_tx_thread;
extern int usrp_tx_thread;
extern int sf_ahead;
extern int oai_exit;
......
openair1/PHY/impl_defs_top.h
View file @ caeedc04
......@@ -43,6 +43,7 @@
* @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _USRP_PHY_RF_INTERFACE_ PHY - USRP RF Interface
* @defgroup _BLADERF_PHY_RF_INTERFACE_ PHY - BLADERF RF Interface
* @defgroup _OXGRF_PHY_RF_INTERFACE_ PHY - OXGRF RF Interface
* @defgroup _LMSSDR_PHY_RF_INTERFACE_ PHY - LMSSDR RF Interface
* @}
* @}
......
radio/CMakeLists.txt
View file @ caeedc04
......@@ -47,3 +47,8 @@ add_boolean_option(OAI_RF_EMULATOR ON "Activate OAI's RF emulator" OFF)
if(OAI_RF_EMULATOR)
add_subdirectory(emulator)
endif()
add_boolean_option(OAI_OXGRF OFF "Activate OAI's OXGRF driver" OFF)
if(OAI_OXGRF)
add_subdirectory(OXGRF)
endif()
radio/COMMON/common_lib.c
View file @ caeedc04
......@@ -45,7 +45,7 @@
#define MAX_GAP 100ULL
const char *const devtype_names[MAX_RF_DEV_TYPE] =
{"", "USRP B200", "USRP X300", "USRP N300", "USRP X400", "BLADERF", "LMSSDR", "IRIS", "No HW", "UEDv2", "RFSIMULATOR"};
{"", "USRP B200", "USRP X300", "USRP N300", "USRP X400", "BLADERF", "OXGRF", "LMSSDR", "IRIS", "No HW", "UEDv2", "RFSIMULATOR"};
const char *get_devname(int devtype) {
if (devtype < MAX_RF_DEV_TYPE && devtype !=MIN_RF_DEV_TYPE )
......
radio/COMMON/common_lib.h
View file @ caeedc04
......@@ -93,6 +93,8 @@ typedef enum {
USRP_X400_DEV,
/*!\brief device is BLADE RF*/
BLADERF_DEV,
/*!\brief device is OXGRF pcie*/
OXGRF_DEV,
/*!\brief device is LMSSDR (SoDeRa)*/
LMSSDR_DEV,
/*!\brief device is Iris */
......
radio/OXGRF/CMakeLists.txt 0 → 100644
View file @ caeedc04
find_library(oxgrf_ss NAMES oxgrf_ss)
add_library(oai_oxgrfdevif MODULE oxgrf_lib.c)
target_link_libraries(oai_oxgrfdevif PRIVATE oxgrf_ss)
target_link_libraries(oai_oxgrfdevif PRIVATE UTIL)
set_target_properties(oai_oxgrfdevif PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR})
add_custom_command(TARGET oai_oxgrfdevif POST_BUILD
COMMAND ${CMAKE_COMMAND} -E create_symlink liboai_oxgrfdevif.so liboai_device.so
WORKING_DIRECTORY ${CMAKE_BINARY_DIR})
radio/OXGRF/oxgrf_api_ss.h 0 → 100755
View file @ caeedc04
This diff is collapsed.
radio/OXGRF/oxgrf_lib.c 0 → 100644
View file @ caeedc04
This diff is collapsed.
radio/OXGRF/oxgrf_lib.h 0 → 100644
View file @ caeedc04
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.0 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/** oxgrf_lib.h
*
* Author: eric
* base on bladerf_lib.h
*/
#include "oxgrf_api_ss.h"
#include "common_lib.h"
/** @addtogroup _OXGRF_PHY_RF_INTERFACE_
* @{
*/
typedef enum {
Y230,
Y240,
Y380,
Y390,
Y550,
Y590,
Y750,
Y790,
IQX6000,
IQX7000,
IQX7100,
IQX7200,
IQX7400,
IQX7402, //split
IQX7600,
IQX8400,
IQX8800,
UNKNOWN = -1,
} OXGRFBoardType;
#if 0
typedef struct {
OXGRFBoardType Model;
struct {
uint64_t sample_rate;
uint64_t bandwidth;
int8_t tx_adv;
} tables[16];
} oxgrf_cfg_table;
oxgrf_cfg_table TABLE_IQX8x00 = { // for IQX8200 & IQX8400 & IQX8800
.Model = IQX8800,
.tables = {
{491520000, 400000000, 151},
{245760000, 200000000, 126},
{122880000, 100000000, 111},
{61440000, 40000000, 172},
{30720000, 20000000, 169},
{15360000, 10000000, 110},
{7680000, 5000000, 110},
{3840000, 3000000, 110},
{1920000, 1400000, 110},
},
};
oxgrf_cfg_table TABLE_IQX7x00 = { // for IQX7100 & IQX7400
.Model = IQX7400,
.tables = {
{122880000, 100000000, 573},
{61440000, 40000000, 286},
{30720000, 20000000, 143},
{15360000, 10000000, 73},
{7680000, 5000000, 36},
{3840000, 3000000, 17},
{1920000, 1400000, 9},
},
};
oxgrf_cfg_table TABLE_IQX7200 = { // for IQX7200
.Model = IQX7200,
.tables = {
{245760000, 200000000, 612},
{122880000, 100000000, 306},
{61440000, 40000000, 152},
{30720000, 20000000, 76},
{15360000, 10000000, 38},
{7680000, 5000000, 19},
{3840000, 3000000, 10},
{1920000, 1400000, 5},
},
};
oxgrf_cfg_table TABLE_Y590 = { // for Y590neo
.Model = Y590,
.tables = {
{245760000, 200000000, 502},
{122880000, 100000000, 251},
{61440000, 40000000, 125},
{30720000, 20000000, 63},
{15360000, 10000000, 32},
{7680000, 5000000, 16},
{3840000, 3000000, 8},
{1920000, 1400000, 4},
},
};
oxgrf_cfg_table TABLE_Y790 = { // for Y790s New/Old Version & Y750s
.Model = Y790,
.tables = {
{491520000, 400000000, 149},
{245760000, 200000000, 125},
{122880000, 100000000, 110},
{61440000, 40000000, 172},
{30720000, 20000000, 168},
},
};
oxgrf_cfg_table TABLE_Y780 = { // for Y780s New Version
.Model = Y780,
.tables = {
{245760000, 200000000, 359},
{122880000, 100000000, 179},
{61440000, 40000000, 88},
{30720000, 20000000, 43},
{15360000, 10000000, 22},
{7680000, 5000000, 11},
{3840000, 3000000, 6},
{1920000, 1400000, 3},
},
};
#endif
/*! \brief OXGRF specific data structure */
typedef struct {
//! opaque OXGRF device struct. An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
OXGRF_DESCRIPTOR *dev;
int16_t *rx_buffer;
int16_t *tx_buffer;
//! Sample rate
unsigned int sample_rate;
int rx_num_channels;
int tx_num_channels;
uint64_t tx_lo_freq;
uint64_t rx_lo_freq;
// --------------------------------
// Debug and output control
// --------------------------------
//! Number of underflows
int num_underflows;
//! Number of overflows
int num_overflows;
//! number of RX errors
int num_rx_errors;
//! Number of TX errors
int num_tx_errors;
//! timestamp of current TX
uint64_t tx_current_ts;
//! timestamp of current RX
uint64_t rx_current_ts;
//! number of TX samples
uint64_t tx_nsamps;
//! number of RX samples
uint64_t rx_nsamps;
//! number of TX count
uint64_t tx_count;
//! number of RX count
uint64_t rx_count;
//! timestamp of RX packet
openair0_timestamp rx_timestamp;
OXGRFBoardType BoardType;
} oxgrf_state_t;
/*! \brief get current timestamp
*\param device the hardware to use
*/
openair0_timestamp trx_get_timestamp(openair0_device *device);
/*@}*/
radio/OXGRF/oxgrf_lib_back.c 0 → 100644
View file @ caeedc04
This diff is collapsed.
radio/OXGRF/rf_helper.h 0 → 100644
View file @ caeedc04
/*
* Copyright 2013-2020 Software Radio Systems Limited
*
* This file is part of srsLTE.
*
* srsLTE is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as
* published by the Free Software Foundation, either version 3 of
* the License, or (at your option) any later version.
*
* srsLTE is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* A copy of the GNU Affero General Public License can be found in
* the LICENSE file in the top-level directory of this distribution
* and at http://www.gnu.org/licenses/.
*
*/
#ifndef OXGRF_RF_HELPER_H_
#define OXGRF_RF_HELPER_H_
// A bunch of helper functions to process device arguments
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define REMOVE_SUBSTRING_WITHCOMAS(S, TOREMOVE) \
remove_substring(S, TOREMOVE ","); \
remove_substring(S, TOREMOVE ", "); \
remove_substring(S, "," TOREMOVE); \
remove_substring(S, ", " TOREMOVE); \
remove_substring(S, TOREMOVE)
static inline void remove_substring(char* s, const char* toremove)
{
while ((s = strstr(s, toremove))) {
memmove(s, s + strlen(toremove), 1 + strlen(s + strlen(toremove)));
}
}
static inline void copy_subdev_string(char* dst, char* src)
{
int n = 0;
int len = (int)strlen(src);
/* Copy until end of string or comma */
while (n < len && src[n] != '\0' && src[n] != ',') {
dst[n] = src[n];
n++;
}
dst[n] = '\0';
}
#endif /* OXGRF_RF_HELPER_H_ */
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.100PRB.oxgrf.conf 0 → 100644
View file @ caeedc04
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2600000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 102;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -16;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ({ ipv4 = "127.0.1.100"; });
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.1/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.1/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 3;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 85;
eNB_instances = [0];
sdr_addrs = "dev=pciex:0,auxdac1=1620";
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band40.tm1.100PRB.oxgrf.conf 0 → 100644
View file @ caeedc04
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 40;
downlink_frequency = 2350000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 102;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -20;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -104;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ({ ipv4 = "127.0.1.100"; });
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.1/24";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.1/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.1/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 5
att_rx = 0;
bands = [40];
max_pdschReferenceSignalPower = -20;
max_rxgain = 82;
eNB_instances = [0];
sdr_addrs = "dev=pciex:0,auxdac1=1660";
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.oxgrf.conf 0 → 100644
View file @ caeedc04
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 102;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -20;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -76;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -90;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ({ ipv4 = "192.168.0.80"; });
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.0.201/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.0.201/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.0.201/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
puSch10xSnr = 250;
puCch10xSnr = 250;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -20;
max_rxgain = 90;
eNB_instances = [0];
sdr_addrs = "dev=pciex:0,auxdac1=1660";
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.nsa.oxgrf.conf 0 → 100644
View file @ caeedc04
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 001; mnc = 01; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -100;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#one (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#0 = 839, 1 = 139
prach_RootSequenceIndex_PR = 1;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ({ ipv4 = "127.0.1.100"; });
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "127.0.1.1";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "127.0.1.2/24";
GNB_IPV4_ADDRESS_FOR_NGU = "127.0.1.2/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "127.0.1.2/24";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 102;
eNB_instances = [0];
sdr_addrs = "dev=pciex:1,auxdac1=1620";
clock_src = "external";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-cu.sa.f1.oxgrf.conf 0 → 100644
View file @ caeedc04
Active_gNBs = ( "cu-oxgrf");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "cu-oxgrf";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
@include "neighbour-config-ho.conf"
nr_cellid = 12345678L;
tr_s_preference = "f1";
local_s_address = "127.0.0.3";
#local_s_address = "192.168.0.203";
remote_s_address = "0.0.0.0"; # multiple DUs
local_s_portd = 2152;
remote_s_portd = 2152;
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "127.0.1.100"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "127.0.1.1/24";
GNB_IPV4_ADDRESS_FOR_NGU = "127.0.1.1/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config : {
global_log_level = "info";
pdcp_log_level = "info";
rrc_log_level = "info";
f1ap_log_level = "info";
ngap_log_level = "info";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-du.sa.band78.106prb.oxgrf.pci0.conf 0 → 100644
View file @ caeedc04
Active_gNBs = ( "du-oxgrf");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_DU_ID = 0xe00;
gNB_name = "du-oxgrf";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
nr_cellid = 12345678L;
////////// Physical parameters:
min_rxtxtime = 4;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 643200;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#one (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
}
);
MACRLCs = ({
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "f1";
local_n_address = "127.0.0.4";
remote_n_address = "127.0.0.3";
local_n_portd = 2152;
remote_n_portd = 2152;
pusch_FailureThres = 1000;
});
L1s = ({
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
});
RUs = ({
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
clock_src = "internal";
});
rfsimulator: {
serveraddr = "server";
serverport = 4043;
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs"
}
log_config: {
global_log_level = "info";
hw_log_level = "info";
nr_phy_log_level = "info";
nr_mac_log_level = "info";
rlc_log_level = "info";
pdcp_log_level = "info";
rrc_log_level = "info";
f1ap_log_level = "info";
ngap_log_level = "debug";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/neighbour-config-ho.conf 0 → 100644
View file @ caeedc04
neighbour_list = (
{
nr_cellid = 12345678;
neighbour_cell_configuration = (
{
gNB_ID = 0xe01;
nr_cellid = 11111111;
physical_cellId = 1;
absoluteFrequencySSB = 643200;
subcarrierSpacing = 1; #30 KHz
band = 78;
plmn = { mcc = 001; mnc = 01; mnc_length = 2};
tracking_area_code = 1;
}
)
},
{
nr_cellid = 11111111;
neighbour_cell_configuration = (
{
gNB_ID = 0xe00;
nr_cellid = 12345678;
physical_cellId = 0;
absoluteFrequencySSB = 643200;
subcarrierSpacing = 1; #30 KHz
band = 78;
plmn = { mcc = 001; mnc = 01; mnc_length = 2};
tracking_area_code = 1;
}
)
}
);
nr_measurement_configuration = {
Periodical = {
enable = 1;
includeBeamMeasurements = 1;
maxNrofRS_IndexesToReport = 4;
};
A2 = {
enable = 1;
threshold = 110;
timeToTrigger = 1;
};
A3 = ({
cell_id = -1; #Default
offset = 10;
hysteresis = 0;
timeToTrigger = 1
}, {
physCellId = 0;
offset = 5;
hysteresis = 1;
timeToTrigger = 2
}, {
physCellId = 1;
offset = 5;
hysteresis = 1;
timeToTrigger = 2
})
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment